package VCP::Source::cvs ; =head1 NAME VCP::Source::cvs - A CVS repository source =head1 SYNOPSIS vcp cvs:module/... -d ">=2000-11-18 5:26:30" # All file revs newer than a date/time vcp cvs:module/... -r foo # all files in module and below labelled foo vcp cvs:module/... -r foo: # All revs of files labelled foo and newer, # including files not tagged with foo. vcp cvs:module/... -r 1.1:1.10 # revs 1.1..1.10 vcp cvs:module/... -r 1.1: # revs 1.1 and up on main trunk ## NOTE: Unlike cvs, vcp requires spaces after option letters. =head1 DESCRIPTION Source driver enabling L|vcp> to extract versions form a cvs repository. The source specification for CVS looks like: cvs:cvsroot/filespec [] where the C is passed to C with the C<-d> option if provided (C is optional if the environment variable C is set) and the filespec and EoptionsE determine what revisions to extract. C may contain trailing wildcards, like C to extract an entire directory tree. If the CVSROOT / -d option looks like a local filesystem (if it doesn't start with ":" and if it points to an existing directory or file), this module will read the RCS files directly from the hard drive unless --use-cvs is passed. This is more accurate (due to poor design of the cvs log command) and much, much faster. =head1 OPTIONS =over =item -b, --bootstrap -b ... --bootstrap=... -b file1[,file2[, etc.]] --bootstrap=file1[,file2[, etc. ]] (the C<...> there is three periods, a L wildcard borrowed from C path syntax). Forces bootstrap mode for an entire export (C<-b ...>) or for certain files. Filenames may contain wildcards, see L for details on what wildcards are accepted. Controls how the first revision of a file is exported. A bootstrap export contains the entire contents of the first revision in the revision range. This should only be necessary when exporting for the first time. An incremental export contains a digest of the revision preceding the first revision in the revision range, followed by a delta record between that revision and the first revision in the range. This allows the destination import function to make sure that the incremental export begins where the last export left off. The default is decided on a per-file basis: if the first revision in the range is revision #.1, the full contents are exported. Otherwise an incremental export is done for that file. This option is necessary when exporting only more recent revisions from a repository. =item --cd Used to set the CVS working directory. VCP::Source::cvs will cd to this directory before calling cvs, and won't initialize a CVS workspace of it's own (normally, VCP::Source::cvs does a "cvs checkout" in a temporary directory). This is an advanced option that allows you to use a CVS workspace you establish instead of letting vcp create one in a temporary directory somewhere. This is useful if you want to read from a CVS branch or if you want to delete some files or subdirectories in the workspace. If this option is a relative directory, then it is treated as relative to the current directory. =item -kb, -k b Pass the -kb option to cvs, forces a binary checkout. This is useful when you want a text file to be checked out with Unix linends, or if you know that some files in the repository are not flagged as binary files and should be. =item --rev-root B. Falsifies the root of the source tree being extracted; files will appear to have been extracted from some place else in the hierarchy. This can be useful when exporting RevML, the RevML file can be made to insert the files in to a different place in the eventual destination repository than they existed in the source repository. The default C is the file spec up to the first path segment (directory name) containing a wildcard, so cvs:/a/b/c... would have a rev-root of C. In direct repository-to-repository transfers, this option should not be necessary, the destination filespec overrides it. =item -r -r v_0_001:v_0_002 -r v_0_002: Passed to C as a C<-r> revision specification. This corresponds to the C<-r> option for the rlog command, not either of the C<-r> options for the cvs command. Yes, it's confusing, but 'cvs log' calls 'rlog' and passes the options through. IMPORTANT: When using tags to specify CVS file revisions, it would ordinarily be the case that a number of unwanted revisions would be selected. This is because the behavior of the cvs log command dumps the entire log history for any files that do not contain the tag. VCP captures the histories of such files and ignores all revisions that are older or newer than any files that match the tags. Be cautious using HEAD as the end of a revision range, this seems to cause the delete actions for files deleted in the last revision to not be noticed. Not sure why. =item --use-cvs Do not try to read local repositories directly; use the cvs command line interface. This is much slower than reading the files directly but is useful to see if there is a bug in the RCS file parser or possible when dealing with corrupt RCS files that cvs will read. If you find that this option makes something work, then there is a discrepancy between the code that reads the RCS files directly (in the absence of this option) and cvs itself. Please let me know (barrie@slaysys.com). Thanks. =item C<-d> -d "2000-11-18 5:26:30<=" Passed to 'cvs log' as a C<-d> date specification. WARNING: if this string doesn't contain a '>' or '<', you're probably doing something wrong, since you're not specifying a range. vcp may warn about this in the future. =back =head2 Files that aren't tagged CVS has one peculiarity that this driver works around. If a file does not contain the tag(s) used to select the source files, C outputs the entire life history of that file. We don't want to capture the entire history of such files, so L goes ignores any revisions before and after the oldest and newest tagged file in the range. =head1 LIMITATIONS "What we have here is a failure to communicate!" - The warden in Cool Hand Luke CVS does not try to protect itself from people checking in things that look like snippets of CVS log file: they come out exactly like they went in, confusing the log file parser. So, if a repository contains messages in the log file that look like the output from some other "cvs log" command, things will likely go awry. CVS stores the -k keyword expansion setting per file, not per revision, so vcp will mark all revisions of a file with the current setting of the -k flag for a file. At least one cvs repository out there has multiple revisions of a single file with the same rev number. The second and later revisions with the same rev number are ignored with a warning like "Can't add same revision twice:...". =for test_script t/80rcs_parser.t t/91cvs2revml.t =cut $VERSION = 1.2 ; # Removed docs for -f, since I now think it's overcomplicating things... #Without a -f This will normally only replicate files which are tagged. This #means that files that have been added since, or which are missing the tag for #some reason, are ignored. # #Use the L option to force files that don't contain the tag to be #=item -f # #This option causes vcp to attempt to export files that don't contain a #particular tag but which occur in the date range spanned by the revisions #specified with -r. The typical use is to get all files from a certain #tag to now. # #It does this by exporting all revisions of files between the oldest and #newest files that the -r specified. Without C<-f>, these would #be ignored. # #It is an error to specify C<-f> without C<-r>. # #exported. use strict ; use Carp ; use Getopt::Long ; use Regexp::Shellish qw( :all ) ; use VCP::Branches; use VCP::Branch; use VCP::Debug ':debug' ; use VCP::Rev qw( iso8601format ); use VCP::Source ; use VCP::Utils::cvs ; use base qw( VCP::Source VCP::Utils::cvs ) ; use fields ( 'CVS_CUR', ## The current change number being processed 'CVS_BOOTSTRAP', ## Forces bootstrap mode 'CVS_IS_INCREMENTAL', ## Hash of filenames, 0->bootstrap, 1->incremental 'CVS_INFO', ## Results of the 'cvs --version' command and CVSROOT 'CVS_LABEL_CACHE', ## ->{$name}->{$rev} is a list of labels for that rev 'CVS_LABELS', ## Array of labels from 'p4 labels' 'CVS_REV_SPEC', ## The revision spec to pass to `cvs log` 'CVS_DATE_SPEC', ## The date spec to pass to `cvs log` 'CVS_FORCE_MISSING', ## Set if -r was specified. 'CVS_K_OPTION', ## Which of the CVS/RCS "-k" options to use, if any 'CVS_DIRECT', ## Read CVS files directly instead of through the ## cvs command. Used if the CVSROOT looks local. 'CVS_LOG_CARRYOVER', ## The unparsed bit of the log file 'CVS_LOG_FILE_DATA', ## Data about all revs of a file from the log file 'CVS_LOG_STATE', ## Parser state machine state 'CVS_LOG_REV', ## The revision being parsed (a hash) 'CVS_NAME_REP_NAME', ## A mapping of repository names to names, used to ## figure out what files to ignore when a cvs log ## goes ahead and logs a file which doesn't match ## the revisions we asked for. 'CVS_NEEDS_BASE_REV', ## What base revisions are needed. Base revs are ## needed for incremental (ie non-bootstrap) updates, ## which is decided on a per-file basis by looking ## at VCP::Source::is_bootstrap_mode( $file ) and ## the file's rev number (ie does it end in .1). 'CVS_SAW_EQUALS', ## Set when we see the ==== lines in log file [1] ## The following are for parsing RCS files directly 'CVS_RCS_FILE_PATH', ## The file currently being scanned when reading ## RCS files directly. 'CVS_RCS_FILE_BUFFER', ## The file currently being scanned when reading 'CVS_RCS_FILE_LINES', ## How many lines have already been purged from ## CVS_RCS_FILE_BUFFER. 'CVS_RCS_FILE_EOF', ## Set if we've read the end of file. 'CVS_MIN_REV', ## The first desired rev_id or tag, if defined 'CVS_MAX_REV', ## The first desired rev_id or tag, if defined 'CVS_FILE_DATA', ## All the revs that were parsed for all files. ## This is accumulated first, so that the ## revs that don't have a particular label ## can be cleaned up if force_missing. 'CVS_CULL_OLD_REVS_FROM', ## Files that did not have a revision labelled ## with the beginning label from a -rfoo:bar spec ## and thus need to have some old revs thrown away 'CVS_CULL_NEW_REVS_FROM', ## Files that did not have a revision labelled ## with the end label from a -rfoo:bar spec ## and thus need to have some young revs thrown away 'CVS_READ_SIZE', ## Used in test suite to probe the RCS parser by ## forcing a really tiny buffer size on it. 'CVS_PRINTING_HASHES', ) ; ## Some aids to testing my $use_cache; my $build_cache; my $time_sort; sub new { my $class = shift ; $class = ref $class || $class ; my VCP::Source::cvs $self = $class->SUPER::new( @_ ) ; $self->{CVS_READ_SIZE} = 100_000; ## Parse the options my ( $spec, $options ) = @_ ; $self->parse_cvs_repo_spec( $spec ) ; my $work_dir ; my $rev_root ; my $rev_spec ; my $date_spec ; my $use_cvs ; # my $force_missing ; local *ARGV = $options; GetOptions( "b|bootstrap:s" => sub { my ( $name, $val ) = @_ ; $self->{CVS_BOOTSTRAP} = $val eq "" ? [ compile_shellish( "..." ) ] : [ map compile_shellish( $_ ), split /,+/, $val ] ; }, "cd=s" => \$work_dir, "rev-root=s" => \$rev_root, "r=s" => \$rev_spec, "d=s" => \$date_spec, "use-cvs" => \$use_cvs, "k=s" => sub { $self->{CVS_K_OPTION} = $_[1] } , "kb" => sub { $self->{CVS_K_OPTION} = "b" } , "use-cache" => \$use_cache, "build-cache" => \$build_cache, "time-sort" => \$time_sort, # "f+" => \$force_missing, ) or $self->usage_and_exit ; $self->{CVS_DIRECT} = ! $use_cvs && do { # If the CVSROOT does not start with a colon, it must be # a direct read. But check to see if it exists anyway, # because we'd prefer CVS give the error messages around here. my $root = $self->cvsroot; substr( $root, 0, 1 ) ne ":" && -d $root; }; # unless ( defined $rev_spec || defined $date_spec ) { # print STDERR "Revision (-r) or date (-d) specification missing\n" ; # $self->usage_and_exit ; # } # if ( $force_missing && ! defined $rev_spec ) { # print STDERR # "Force missing (-f) may not be used without a revision spec (-r)\n" ; # $self->usage_and_exit ; # } # my $files = $self->repo_filespec ; unless ( defined $rev_root ) { $self->deduce_rev_root( $files ) ; } ## Don't normalize the filespec. $self->repo_filespec( $files ) ; $self->rev_spec( $rev_spec ) ; $self->date_spec( $date_spec ) ; $self->force_missing( defined $rev_spec ) ; # $self->force_missing( $force_missing ) ; ## Make sure the cvs command is available $self->command_stderr_filter( qr{^ (?:cvs\s (?: (?:server|add|remove):\suse\s'cvs\scommit'\sto.* |tag.*(?:waiting for.*lock|obtained_lock).* ) )\n }x ) ; ## Doing a CVS command or two here also forces cvs to be found in new(), ## or an exception will be thrown. if ( $self->{CVS_DIRECT} ) { my $root = $self->cvsroot; $self->{CVS_INFO} = <cvs( ['--version' ], undef, \$self->{CVS_INFO} ) ; ## This does a checkout, so we'll blow up quickly if there's a problem. unless ( defined $work_dir ) { $self->create_cvs_workspace ; } else { $self->work_root( File::Spec->rel2abs( $work_dir ) ) ; $self->command_chdir( $self->work_path ) ; } } return $self ; } sub is_incremental { my VCP::Source::cvs $self= shift ; my ( $file, $first_rev ) = @_ ; my $bootstrap_mode = ( ( $first_rev =~ tr/.// ) == 1 && substr( $first_rev, -2 ) eq ".1" ) || ( $self->{CVS_BOOTSTRAP} && grep $file =~ $_, @{$self->{CVS_BOOTSTRAP}} ) ; return $bootstrap_mode ? 0 : "incremental" ; } sub rev_spec { my VCP::Source::cvs $self = shift ; $self->{CVS_REV_SPEC} = shift if @_ ; return $self->{CVS_REV_SPEC} ; } sub rev_spec_cvs_option { my VCP::Source::cvs $self = shift ; return defined $self->rev_spec? "-r" . $self->rev_spec : (), } sub date_spec { my VCP::Source::cvs $self = shift ; $self->{CVS_DATE_SPEC} = shift if @_ ; return $self->{CVS_DATE_SPEC} ; } sub date_spec_cvs_option { my VCP::Source::cvs $self = shift ; return defined $self->date_spec ? "-d" . $self->date_spec : (), } sub force_missing { my VCP::Source::cvs $self = shift ; $self->{CVS_FORCE_MISSING} = shift if @_ ; return $self->{CVS_FORCE_MISSING} ; } sub denormalize_name { my VCP::Source::cvs $self = shift ; ( my $n = '/' . $self->SUPER::denormalize_name( @_ ) ) =~ s{/+}{/}g; return $n; } sub handle_header { my VCP::Source::cvs $self = shift ; my ( $header ) = @_ ; $header->{rep_type} = 'cvs' ; $header->{rep_desc} = $self->{CVS_INFO} ; $header->{rev_root} = $self->rev_root ; $header->{branches} = $self->branches; $self->dest->handle_header( $header ) ; return ; } sub get_rev { my VCP::Source::cvs $self = shift ; my VCP::Rev $r ; ( $r ) = @_ ; my $wp = $self->work_path( "revs", $r->name, $r->rev_id ) ; $r->work_path( $wp ) ; $self->mkpdir( $wp ) ; $self->cvs( [ "checkout", "-r" . $r->rev_id, "-p", $r->source_name, ], undef, $wp, ) ; } sub _concoct_base_rev { my VCP::Source::cvs $self = shift; my ( $r ) = @_; Carp::confess "undefined \$r" unless defined $r; return if defined $r->previous_id; my $rev_id = $r->rev_id ; ## TODO: test for when the base revision is on a different branch? if ( $self->is_incremental( $r->source_name, $rev_id ) ) { $rev_id =~ s{(\d+)$}{$1-1}e ; Carp::confess "illegal rev concocted: $rev_id" if $rev_id =~ /\.0\z/; my $br = VCP::Rev->new( id => $self->denormalize_name( $r->name ) . "#$rev_id", source_name => $r->source_name, name => $r->name, branch_id => $r->branch_id, rev_id => $rev_id, type => $r->type, ); my $ok = eval { my $nr = $self->revs->get_last_added( $br ) ; $nr->previous_id( $br->id ) ; $nr->previous( $br ) ; 1 ; } ; die $@ unless $ok || 0 < index $@, "t find revision"; $self->revs->add( $br ); } } sub get_revs_from_log_file { my VCP::Source::cvs $self = shift; $self->{CVS_LOG_STATE} = '' ; $self->{CVS_LOG_CARRYOVER} = '' ; $self->revs( VCP::Revs->new ) ; ## We need to watch STDERR for messages like ## cvs log: warning: no revision `ch_3' in `/home/barries/src/revengine/tmp/cvsroot/foo/add/f4,v' ## Files that cause this warning need to have some revisions ignored because ## cvs log will emit the entire log for these files in addition to ## the warning, including revisions checked in before the first tag and ## after the last tag. my %ignore_files ; my $ignore_file = sub { exists $ignore_files{$self->{CVS_NAME_REP_NAME}->{$_[0]}} ; } ; $self->{CVS_LOG_FILE_DATA} = {} ; $self->{CVS_LOG_REV} = {} ; $self->{CVS_SAW_EQUALS} = 0 ; # The log command must be run in the directory above the work root, # since we pass in the name of the workroot dir as the first dir in # the filespec. my $tmpdir = $self->tmp_dir( "co" ) ; my $spec = $self->repo_filespec; $spec =~ s{/...\z}{}; ## hack, since cvs always recurses. my @log_parms = ( "log", $self->rev_spec_cvs_option, $self->date_spec_cvs_option, length $spec ? $spec : (), ); print STDERR "vcp: running cvs ", join( " ", @log_parms ), "\n"; $self->cvs( \@log_parms, undef, sub { $self->parse_log_file( @_ ) }, { in_dir => $tmpdir, stderr_filter => sub { my ( $err_text_ref ) = @_ ; $$err_text_ref =~ s@ ## This regexp needs to gobble newlines. ^cvs(?:\.exe)?\slog:\swarning:\sno\srevision\s.*?\sin\s[`"'](.*)[`"']\r?\n\r? @ $ignore_files{$1} = undef ; '' ; @gxmei ; }, }, ) ; #open L, "tmp/gnome/ChangeLog.log" or die $!; #$self->parse_log_file( join "", ); #close L; my $revs = $self->revs ; ## Figure out the time stamp range for force_missing calcs. my ( $min_rev_spec_time, $max_rev_spec_time ) ; if ( $self->force_missing ) { ## If the rev_spec is /:$/ || /^:/, we tweak the range ends. my $max_time = 0 ; $max_rev_spec_time = 0 ; $min_rev_spec_time = 0 if substr( $self->rev_spec, 0, 1 ) eq ':' ; for my $r ( @{$revs->as_array_ref} ) { next if $r->is_base_rev ; my $t = $r->time ; $max_time = $t if $t >= $max_rev_spec_time ; next if $ignore_file->( $r->source_name ) ; $min_rev_spec_time = $t if $t <= ( $min_rev_spec_time || $t ) ; $max_rev_spec_time = $t if $t >= $max_rev_spec_time ; } # $max_rev_spec_time = $max_time if substr( $self->rev_spec, -1 ) eq ':' ; $max_rev_spec_time = undef if substr( $self->rev_spec, -1 ) eq ':' ; debug( "vcp: including files in ['", localtime( $min_rev_spec_time ), "'..'", defined $max_rev_spec_time ? localtime( $max_rev_spec_time ) : "", "']" ) if debugging $self ; } ## Remove extra revs from queue by copying from $revs to $self->revs(). ## TODO: Debug simultaneous use of -r and -d, since we probably are ## blowing away revs that -d included that -r didn't. I haven't ## checked to see if we do or don't blow said revs away. my %oldest_revs ; $self->revs( VCP::Revs->new ) ; for my $r ( @{$revs->as_array_ref} ) { if ( $ignore_file->( $r->source_name ) ) { if ( (!defined $min_rev_spec_time || $r->time >= $min_rev_spec_time) && (!defined $max_rev_spec_time || $r->time <= $max_rev_spec_time) ) { debug( "vcp: including file ", $r->as_string ) if debugging $self ; } else { debug( "vcp: ignoring file ", $r->as_string, ": no revisions match -r" ) if debugging $self ; ## TODO: do a reverse index. for my $nr ( @{$revs->as_array_ref} ) { if ( ( $nr->previous_id || "" ) eq $r->id ) { $nr->previous_id( undef ); $nr->previous( undef ); } } next ; } } ## Because of the order of the log file, the last rev set is always ## the first rev in the range. $oldest_revs{$r->source_name} = $r ; $self->revs->add( $r ) ; } $self->_concoct_base_rev( $_ ) for values %oldest_revs; print STDERR "vcp: found ", 0+$self->revs->get, " revs\n"; } sub get_matching_files_direct { my VCP::Source::cvs $self = shift; require File::Find; require Cwd; my $root = $self->cvsroot; my $spec = $self->repo_filespec; my $cwd = Cwd::cwd; chdir $root or die "$!: $root\n"; $spec .= "/..." if $spec !~ m{\/...\z} && -d $spec; $spec =~ s{^/+}{}; local $| = 1; my $hash_count = 0; my $hash_time = 0; my @files; $File::Find::prune = 0; ## Suppress used only once warning. my %seen; # Jump as far down the directory hierarchy as we can. # Figure out if this is a specific file by adding ,v # and checking for it (here and in the Attic), but that's # not worth the hassle right now. It would save us some # work when pulling a file out of the top of a big dir tree, # though. ( my $start = $spec ) =~ s{(^|/+)[^/]*(\*|\?|\.\.\.).*}{}; if ( -f "$start,v" ) { push @files, $start; $self->parse_rcs_file( $start ); goto SKIP_FILE_FIND; } ( my $attic_start = $start ) =~ s{((?:[\\/]|\A))([^\\/]+)\z}{${1}Attic/$2}; if ( -f "$attic_start,v" ) { push @files, $attic_start; $self->parse_rcs_file( $attic_start ); goto SKIP_FILE_FIND; } while ( length $start && ! -d $start ) { last unless $start =~ s{/+[^/]*\z}{}; } $spec = substr( $spec, length $start ); $spec =~ s{^[\\/]+}{}g; my $pat = compile_shellish $spec, { star_star => 0 }; print STDERR "vcp: scanning $root/$start/...: "; $self->{CVS_PRINTING_HASHES} = 1; $start = "." unless length $start && -d $start; my $ok = eval { File::Find::find( { no_chdir => 1, wanted => sub { if ( /CVSROOT\z/ ) { $File::Find::prune = 1; return; } return if -d; s/^\.\///; return unless s/,v\z//; if ( -f _ && $_ =~ $pat ) { ( my $undeleted_path = $_ ) =~ s/(\/)Attic\//$1/; if ( $seen{$undeleted_path}++ ) { warn "\nvcp: scanner found $undeleted_path again\n"; return; } eval { $self->parse_rcs_file( $_ ); 1; } or do { print STDERR "\n" if $self->{CVS_PRINTING_HASHES}; $self->{CVS_PRINTING_HASHES} = 0; die "$@ for $_\n"; }; push @files, $_; } unless ( $hash_count++ % 50 ) { my $t = time; if ( $t > $hash_time + 5 ) { $hash_time = $t; print STDERR "#"; } } }, }, $start ); 1; }; my $x = $@; print STDERR "\n" if $self->{CVS_PRINTING_HASHES}; $self->{CVS_PRINTING_HASHES} = 0; die $x unless $ok; SKIP_FILE_FIND: print STDERR "vcp: found ", 0+@files, " file(s)\n"; $self->queue_parsed_revs; print STDERR "vcp: queued ", 0+$self->revs->get, " rev(s)\n"; chdir $cwd or die "$!: $cwd"; return \@files; } { my $special = "\$,.:;\@"; my $idchar = "[^\\s$special\\d\\.]"; # Differs from man rcsfile(1) my $num_re = "[0-9.]+"; my $id_re = "(?:(?:$num_re)?$idchar(?:$idchar|$num_re)*)"; my %id_map = ( # RCS file => "cvs log" (& its parser) field name changes "log" => "comment", "expand" => "keyword", ); sub _xdie { my VCP::Source::cvs $self = shift; my $buffer = $self->{CVS_RCS_FILE_BUFFER}; my $pos = pos( $$buffer ) || 0; my $line = $self->{CVS_RCS_FILE_LINES} + ( substr( $$buffer, 0, $pos ) =~ tr/\n// ); my $near = substr( $$buffer, $pos, 100 ); $near .= "..." if $pos + 100 > length $$buffer; $near =~ s/\n/\\n/g; $near =~ s/\r/\\r/g; die "vcp: ", @_, " in RCS file $self->{CVS_RCS_FILE_PATH}, near line $line: '$near'\n"; } sub _read_rcs_goodness { my VCP::Source::cvs $self = shift; my ( $fh ) = @_; $self->_xdie( "read beyond end of file" ) if $self->{CVS_RCS_FILE_EOF}; my $buffer = $self->{CVS_RCS_FILE_BUFFER}; my $pos = pos( $$buffer ) || 0; ## || 0 in case no matches yet. $self->{CVS_RCS_FILE_LINES} += substr( $$buffer, 0, $pos ) =~ tr/\n//; substr( $$buffer, 0, $pos ) = ""; my $c = 0; { my $little_buffer; $c = read $fh, $little_buffer, $self->{CVS_READ_SIZE}; ## Hmmm, sometimes $c comes bak undefined at end of file, ## with $! not TRUE. most odd. Tested with 5.6.1 and 5.8.0 $self->_xdie( "$! reading rcs file" ) if ! defined $c && $!; $$buffer .= $little_buffer if $c; }; pos( $$buffer ) = 0; ## Prevent undefs from tripping up code later $self->{CVS_RCS_FILE_EOF} ||= ! $c; 1; } # Read an RCS file in to $self->{CVS_FILE_DATA} sub parse_rcs_file { my VCP::Source::cvs $self = shift; my ( $file ) = @_; require File::Spec::Unix; my $path = $self->{CVS_RCS_FILE_PATH} = File::Spec::Unix->canonpath( $self->cvsroot . "/" . $file . ",v" ); debug "vcp: going to read $path" if debugging $self; open F, "<$path" or die "$!: $path\n"; binmode F; my $rev_id; $file =~ s{\A(.*?)[\\/]+Attic}{$1}; my $file_data = $self->{CVS_FILE_DATA}->{$file} = { rcs => $path, working => $file, revs => {}, }; $self->{CVS_RCS_FILE_EOF} = 0; $self->{CVS_RCS_FILE_LINES} = 0; $self->{CVS_RCS_FILE_BUFFER} = \(my $b = ""); local $_; *_ = $self->{CVS_RCS_FILE_BUFFER}; pos = 0; my $h; # the hash to stick the data in. my $id; # the name of the element to assign the next value to START: $self->_read_rcs_goodness( \*F ); if ( /\A($id_re)\s+(?=\S)/gc ) { $h = $file_data; $id = $1; $id = $id_map{$id} if exists $id_map{$id}; # had a buggy RE once... $self->_xdie( "$id should not have been parsed as an identifier" ) if $id =~ /\A$num_re\z/o; debug "vcp: parsing field ", $id if explicitly_debugging $self; goto VALUE; } else { ## ASSume first identifier < 100 chars if ( ! $self->{CVS_RCS_FILE_EOF} && length() < 100 ) { debug "vcp: reading more for START parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto START; } $self->_xdie( "RCS file should begin with an identifier" ); } PARAGRAPH_START: if ( /\G($num_re)\r?\n/gc ) { $rev_id = $1; if ( explicitly_debugging $self ) { my $is_new = ! exists $file_data->{revs}->{$rev_id}; debug "vcp: parsing", $is_new ? () : " MORE", " ", $rev_id, " fields" } ## Reuse the existing hash for this rev or create a new one. $file_data->{revs}->{$rev_id}->{rev_id} = $rev_id; $h = $file_data->{revs}->{$rev_id}; $id = undef; goto ID; } elsif ( /\Gdesc\s+(?=\@)/gc ) { $h = $file_data; $id = "desc"; $id = $id_map{$id} if exists $id_map{$id}; debug "vcp: parsing field ", $id if explicitly_debugging $self; goto VALUE; } else { ## ASSume no identifier or rev number is > approx 1000 chars long if ( ! $self->{CVS_RCS_FILE_EOF} && length() - pos() < 1000 ) { debug "vcp: reading more for PARAGRAPH_START parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto PARAGRAPH_START; } $self->_xdie( "expected an identifier or version string" ); } ID: #( my $s = substr( $_, pos ||0, 100 ) ) =~ s/\n/\\n/g; #warn pos, "'$s'"; if ( /\G($id_re)(?:\s+(?=\S)|\s*(?=;))/gc ) { # No ^, unlike PARAGRAPH_START's first RE $id = $1; $id = $id_map{$id} if exists $id_map{$id}; # had a buggy RE once... $self->_xdie( "$id should not have been parsed as an identifier" ) if $id =~ /\A$num_re\z/o; debug "vcp: parsing field ", $id if explicitly_debugging $self; goto VALUE; } else { ## ASSume no identifier > approx 1000 chars long if ( ! $self->{CVS_RCS_FILE_EOF} && length() - pos() < 1000 ) { debug "vcp: reading more for ID parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto ID; } $self->_xdie( "expected an identifier or version string" ); } VALUE: $self->_xdie( "already assigned to '$h->{$id}'" ) if exists $h->{$id}; VALUE_DATA: if ( /\G(?=;)/gc ) { $h->{$id} = ""; goto VALUE_END; } elsif ( /\G\@/gcs ) { # It's an RCS string (@...@) goto STRING unless $id eq "text"; TEXT: # Ignore the often veeeerry long text field for now. # # This line causes segfaults in perl5.6.1 and perl5.8.1 # under linux: # # if ( /\G(?:[^\@]|\@\@)*/gc ) { # # So, instead, we look bite off the chunks by looking for # all text up to an @ and eating it. if ( /\G[^\@]*/gc ) { goto TEXT if /\G\@\@/gc; unless ( /\G\@(?=[^\@])/gc ) { # NOTE: RCS files must end in a newline, so it's safe # to assume a non-@ after the @. debug "vcp: reading more for TEXT parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto TEXT; } } $h->{text} = "FILE TEXT NOT EXTRACTED FROM RCS FILE $path\n"; goto VALUE_END; STRING: if ( /\G((?:[^\@]|\@\@)*)/gc ) { $h->{$id} .= $1 unless $id eq "text"; unless ( /\G\@(?=[^\@])/gc ) { # NOTE: RCS files must end in a newline, so it's safe # to assume a non-@ after the @. debug "vcp: reading more for STRING parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto STRING; } } $self->_xdie( "odd number of '\@'s in RCS string for field '$id'" ) if ( $h->{$id} =~ tr/\@// ) % 2; $h->{$id} =~ s/\@\@/\@/g; goto VALUE_END; } elsif ( /\G(?!\@)/gc ) { # Not a string, so it's a semicolon delimited value NOT_STRING: if ( /\G([^;]+)/gc ) { $h->{$id} .= $1; unless ( /\G(?=;)/gc ) { debug "vcp: reading more for NOT_STRING parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto NOT_STRING; } } if ( $id eq "date" ) { ## The below seems to monkey with $_, so protect pos(). my $p = pos; $h->{time} = $self->parse_time( $h->{date} ); pos = $p; } goto VALUE_END; } else { # We only need one char. if ( ! $self->{CVS_RCS_FILE_EOF} && length() - pos() < 1 ) { debug "vcp: reading more for VALUE_DATA parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto VALUE_DATA; } $self->_xdie( "unable to parse value for $id" ); } VALUE_END: debug "vcp: $id='", substr( $h->{$id}, 0, 100 ), length $h->{$id} > 100 ? "..." : (), "'" if explicitly_debugging $self; if ( $id eq "symbols" ) { my %tags; for ( split /\s+/, $h->{symbols} ) { my ( $tag, $rev ) = split /:/, $_, 2; $tags{$tag} = $rev; push @{$h->{RTAGS}->{$rev}}, $tag; $self->branches->add( VCP::Branch->new( branch_id => $tag ) ) if $rev =~ /\.0\.\d+\z/; } delete $h->{symbols}; ## Figure out actual min/max rev_ids from rev_ids or tags. my $t = $self->{CVS_MIN_REV}; if ( defined $t ) { $t = exists $tags{$t} ? $tags{$t} : undef if $t =~ /[^\d.]/; if ( defined $t && length $t ) { $h->{min_rev_id} = [ VCP::Rev->split_id( $t ) ]; } else { # note that we only get here if a -r option was # passed, so later code can look at this to see if # it needs to cull old revs. push @{$self->{CVS_CULL_OLD_REVS_FROM}}, $h; } } $t = $self->{CVS_MAX_REV}; if ( defined $t ) { $t = exists $tags{$t} ? $tags{$t} : undef if $t =~ /[^\d.]/; if ( defined $t && length $t ) { $h->{max_rev_id} = [ VCP::Rev->split_id( $t ) ]; } else { push @{$self->{CVS_CULL_NEW_REVS_FROM}}, $h; } } } $id = undef; VALUE_END_DELIMETER: #( my $s = substr( $_, pos || 0, 100 ) ) =~ s/\n/\\n/g; #warn pos, "'$s'"; if ( /\G[ \t]*(?:\r?\n|;[ \t]*(?:\r?\n|(?=[^ \t;]))|(?=[^ \t;]))/gc ) { VALUE_END_WS: #( my $s = substr( $_, pos || 0, 100 ) ) =~ s/\n/\\n/g; #warn pos, "'$s'"; if ( /\G(?=\S)/gc ) { goto ID; } if ( /\G[ \t\r\n]*(\r?\n)+(?=\S)/gc ) { goto PARAGRAPH_START; } ## ASSume no runs of \v or \r\n of mroe than 1000 chars. if ( ! $self->{CVS_RCS_FILE_EOF} && length() - pos() < 1000 ) { debug "vcp: reading more for VALUE_END_WS parsing" if explicitly_debugging $self; $self->_read_rcs_goodness( \*F ); goto VALUE_END_WS; } goto FINISHED unless length; if ( ! /\G(\r?\n)/gc ) { $self->_xdie( "expected newline" ); } } # ASSume semi + whitespace + 1 more char is less than 1000 bytes if ( length() - pos() < 1000 ) { debug "vcp: reading more for VALUE_END_DELIMETER parsing" if explicitly_debugging $self; eval { $self->_read_rcs_goodness( \*F ); goto FINISHED if /\G(\r?\n)*\z/gc; goto VALUE_END_DELIMETER; }; if ( 0 == index $@, "vcp: read beyond end of file" ) { goto FINISHED if /\G(\r?\n)*\z/gc; } else { die $@; } } $self->_xdie( "expected optional semicolon and tabs or spaces" ); FINISHED: close F; ## Throw away unwanted revs to save space and so the part of ## the culling algorithm that estimates limits can find the ## oldest / newest wanted revs easily. my $min_rev_id = $file_data->{min_rev_id}; my $max_rev_id = $file_data->{max_rev_id}; if ( $min_rev_id || $max_rev_id ) { delete $file_data->{revs}->{$_} for grep( ( $min_rev_id && VCP::Rev->cmp_id( $_, $min_rev_id ) < 0 ) || ( $max_rev_id && VCP::Rev->cmp_id( $_, $max_rev_id ) > 0 ), keys %{$file_data->{revs}} ); } ## Convert the hashes in to revs to let VCP::Rev fold comments, ## especially, and names in to the global hashes, saving memory. for ( values %{$file_data->{revs}} ) { $_ = $self->_fill_in_rev( $file_data, $_ ); } delete $file_data->{RTAGS}; # conserve memory. $self->{CVS_RCS_FILE_BUFFER} = undef; } } # Importing is done after parsing so we can cull unwanted revs # if force_missing is set. sub queue_parsed_revs { my VCP::Source::cvs $self = shift; my $files = $self->{CVS_FILE_DATA}; if ( $self->{CVS_CULL_OLD_REVS_FROM} || $self->{CVS_CULL_NEW_REVS_FROM} ) { my ( $min_cull_time, $max_cull_time ) ; for my $file_data ( values %$files ) { for my $r ( values %{$file_data->{revs}} ) { my $t = $r->time; $min_cull_time = $t if $file_data->{min_rev_id} && ( ! defined $min_cull_time || $t < $min_cull_time ) ; $max_cull_time = $t if $file_data->{max_rev_id} && ( ! defined $max_cull_time || $t > $max_cull_time ) ; } } my %dead_uns; if ( defined $min_cull_time ) { for ( @{$self->{CVS_CULL_OLD_REVS_FROM}} ) { debug "vcp: ignoring revisions in ", $_->{working}, " before ", iso8601format $min_cull_time if debugging $self; my $revs = $_->{revs}; delete $revs->{$_->rev_id} for grep $_->time < $min_cull_time, values %$revs; } } $self->{CVS_CULL_OLD_REVS_FROM} = undef; if ( defined $max_cull_time ) { for ( @{$self->{CVS_CULL_NEW_REVS_FROM}} ) { debug "vcp: ignoring revisions in ", $_->{working}, " after ", iso8601format $max_cull_time if debugging $self; my $revs = $_->{revs}; delete $revs->{$_->{rev_id}} for grep $_->{time} > $max_cull_time, values %$revs; } } $self->{CVS_CULL_NEW_REVS_FROM} = undef; } ## NOTES: right now, force_missing is set whenever the -r option was ## passed. If $r wasn't passed, then it's ok to have all revs of all ## files, so we do no culling. If -r was passed, we assume force_missing, ## which throws away unwanted revisions. At some later time, we may ## need to implement an "ignore files without labels specified in -r" option ## and a "keep all revisions that would have been cut had a file had all ## labels specified in -r" option. By "all labels specified in -r", I mean ## that -r may specify none, one, or two labels; the force_missing ## logic kicks in unless ## the RCS file contains matching labels for all labels that happen ## to be specified in -r. for my $file_data ( values %{$self->{CVS_FILE_DATA}} ) { next unless keys %{$file_data->{revs}}; debug "vcp: checking revs in ", $file_data->{working} if debugging $self; $file_data->{keyword} = "" unless defined $file_data->{keyword}; my $oldest_rev; my @revs; { my $oldest_rev_id; for my $r ( values %{$file_data->{revs}} ) { my $rev_id = [ VCP::Rev->split_id( $r->rev_id ) ] ; # for when we reimplement -d # if ( defined $min_time && $_->{time} < $min_time ) { # debug "vcp: ignoring ", $file_data->{working}, "#", # $_->{rev_id}, # ": rev time ", # iso8601format $_->time, # " < min time ", # iso8601format $min_time, # if debugging $self; # next; # } # # if ( defined $max_time && $_->{time} > $max_time ) { # debug "vcp: ignoring ", $file_data->{working}, "#", # $_->{rev_id}, # ": rev time ", # iso8601format $_->time, # " > max time ", # iso8601format $max_time, # if debugging $self; # next; # } # This is now done when parsing # if ( $file_data->{min_rev_id} # && VCP::Rev->cmp_id( $rev_id, $file_data->{min_rev_id} ) < 0 # ) { # debug "vcp: ignoring ", $file_data->{working}, "#", $_->{rev_id}, # ": before #", VCP::Rev->join_id( $file_data->{min_rev_id} ) # if debugging $self; # next; # } # # if ( $file_data->{max_rev_id} # && VCP::Rev->cmp_id( $rev_id, $file_data->{max_rev_id} ) > 0 # ) { # debug "vcp: ignoring ", $file_data->{working}, "#", $_->{rev_id}, # ": after #", VCP::Rev->join_id( $file_data->{max_rev_id} ) # if debugging $self; # next; # } # my $r = $self->_fill_in_rev( $file_data, $_ ); $self->revs->add( $r ); push @revs, $r; if ( ! $oldest_rev_id || VCP::Rev->cmp_id( $rev_id, $oldest_rev_id ) < 0 ) { $oldest_rev_id = $rev_id; $oldest_rev = $r; } } } $self->_concoct_base_rev( $oldest_rev ); # Link all the revs to their predecessors for ( @revs ) { next if $_->is_base_rev || ( $_ == $oldest_rev && ! $self->is_incremental( $_->source_name, $_->rev_id ) ); $_->rev_id =~ /\A([\d.]+)\.(\d+)\z/ or die "can't parse $_->{rev_id}"; my $prev_id; my $file = $_->source_name; if ( $2 >= 2 ) { $prev_id = "/$file#$1." . ( $2 - 1 ); } elsif ( 0 <= index $1, "." and $2 == 1 ) { ( $prev_id = "/$file#$1" ) =~ s/\.[^.]+\z//; } if ( defined $prev_id ) { debug "vcp: previous id for ", $_->as_string, ": ", $prev_id if debugging $self; my $id = "/$file#" . $_->rev_id; my $r = $self->revs->get( $id ); my $pr = $self->revs->get( $prev_id ); $r->previous_id( $prev_id ); $r->previous( $pr ) ; } } delete $file_data->{revs}; } } sub get_revs_direct { my VCP::Source::cvs $self = shift; my $files = $self->get_matching_files_direct; } sub copy_revs { my VCP::Source::cvs $self = shift ; if ( $use_cache && -f "cvs.cache" ) { print STDERR "vcp: loading cvs.cache...\n"; my $old_revs = do "cvs.cache"; die $! unless defined $old_revs; die $VCP::Source::cvs::foo unless $VCP::Source::cvs::foo; $self->revs( $VCP::Source::cvs::foo ); print STDERR "vcp: read ", 0+$self->revs->get, " revs from cvs.cache\n"; } else { if ( $self->{CVS_DIRECT} ) { $self->{CVS_CULL_OLD_REVS_FROM} = undef; $self->{CVS_CULL_NEW_REVS_FROM} = undef; $self->get_revs_direct; } else { $self->get_revs_from_log_file; } } my $mem = `ps -o vsz -p $$ -h`; chomp $mem; if ( ( $use_cache && ! -f "cvs.cache" ) || $build_cache ) { open F, ">cvs.cache" or die $!; require Data::Dumper; no warnings "once"; $Data::Dumper::Purity = 1; print F Data::Dumper->Dump( [ $self->revs], [ "foo" ] ); close F; } warn "memory: $mem\n"; #use BFD q( $self ); #exit; print STDERR "vcp: sorting revisions\n"; my $start_time; if ( $time_sort ) { require Time::HiRes; $start_time = Time::HiRes::time() if $time_sort; enable_debug( "VCP::Dest" ); } $self->dest->sort_revs( $self->revs ) ; if ( $time_sort ) { my $diff = Time::HiRes::time() - $start_time; my $mins = int $diff / 60; printf STDERR "vcp: sort took %2d:%06.3f\n", $mins, $diff - $mins * 60; } my $metadata_only = $self->dest->metadata_only; my VCP::Rev $r ; print STDERR "vcp: copying revisions\n"; while ( $r = $self->revs->shift ) { $self->get_rev( $r ) unless $metadata_only || ( $r->action || "" ) eq "delete"; $self->dest->handle_rev( $r ) ; } } # Here's a typical file log entry. # ############################################################################### # #RCS file: /var/cvs/cvsroot/src/Eesh/Changes,v #Working file: src/Eesh/Changes #head: 1.3 #branch: #locks: strict #access list: #symbolic names: # Eesh_003_000: 1.3 # Eesh_002_000: 1.2 # Eesh_000_002: 1.1 #keyword substitution: kv #total revisions: 3; selected revisions: 3 #description: #---------------------------- #revision 1.3 #date: 2000/04/22 05:35:27; author: barries; state: Exp; lines: +5 -0 #*** empty log message *** #---------------------------- #revision 1.2 #date: 2000/04/21 17:32:14; author: barries; state: Exp; lines: +22 -0 #Moved a bunch of code from eesh, then deleted most of it. #---------------------------- #revision 1.1 #date: 2000/03/24 14:54:10; author: barries; state: Exp; #*** empty log message *** #============================================================================= ############################################################################### sub _store_rev { my VCP::Source::cvs $self = shift; return unless keys %{$self->{CVS_LOG_REV}} ; $self->{CVS_LOG_REV}->{comment} = '' if $self->{CVS_LOG_REV}->{comment} eq '*** empty log message ***' ; $self->{CVS_LOG_REV}->{comment} =~ s/\r\n|\n\r/\n/g ; #debug map "$_ => $self->{CVS_LOG_FILE_DATA}->{$_},", sort keys %{$self->{CVS_LOG_FILE_DATA}} ; my $r = $self->_fill_in_rev( $self->{CVS_LOG_FILE_DATA}, $self->{CVS_LOG_REV} ) ; $self->{CVS_LOG_REV} = {} ; my $ok = eval { my $nr = $self->revs->get_last_added( $r ) ; $nr->previous_id( $r->id ) ; $nr->previous( $r ) ; 1 ; } ; die $@ unless $ok || 0 < index $@, "t find revision"; $r->previous( $self->revs->get( $r->previous_id ) ) if defined $r->previous_id; $ok = eval { $self->revs->add( $r ) ; 1 ; } ; unless ( $ok ) { if ( $@ =~ /Can't add same revision twice/ ) { warn $@ ; } else { die $@ ; } } } sub parse_log_file { my ( $self, $input ) = @_ ; if ( defined $input ) { $self->{CVS_LOG_CARRYOVER} .= $input ; } else { ## There can only be leftovers if they don't end in a "\n". I've never ## seen that happen, but given large comments, I could be surprised... $self->{CVS_LOG_CARRYOVER} .= "\n" if length $self->{CVS_LOG_CARRYOVER} ; } local $_ ; ## DOS, Unix, Mac lineends spoken here. while ( $self->{CVS_LOG_CARRYOVER} =~ s/^(.*(?:\r\n|\n\r|\n))// ) { $_ = $1 ; ## [1] See bottom of file for a footnote explaining this delaying of ## clearing CVS_LOG_FILE_DATA and CVS_LOG_STATE until we see ## a ========= line followed by something other than a ----------- ## line. ## TODO: Move to a state machine design, hoping that all versions ## of CVS emit similar enough output to not trip it up. ## TODO: BUG: Turns out that some CVS-philes like to put text ## snippets in their revision messages that mimic the equals lines ## and dash lines that CVS uses for delimiters!! PLEASE_TRY_AGAIN: if ( /^===========================================================*$/ ) { $self->_store_rev;# "is oldest" ) ; $self->{CVS_SAW_EQUALS} = 1 ; next ; } if ( /^----------------------------*$/ ) { $self->_store_rev unless $self->{CVS_SAW_EQUALS} ; $self->{CVS_SAW_EQUALS} = 0 ; $self->{CVS_LOG_STATE} = 'rev' ; next ; } if ( $self->{CVS_SAW_EQUALS} ) { $self->{CVS_LOG_FILE_DATA} = {} ; $self->{CVS_LOG_STATE} = '' ; $self->{CVS_SAW_EQUALS} = 0 ; } unless ( $self->{CVS_LOG_STATE} ) { if ( /^(RCS file|Working file|head|branch|locks|access list|keyword substitution):\s*(.*)/i ) { #warn lc( (split /\s+/, $1 )[0] ), "/", $1, ": ", $2, "\n" ; $self->{CVS_LOG_FILE_DATA}->{lc( (split /\s+/, $1 )[0] )} = $2 ; #$DB::single = 1 if /keyword/ && $self->{CVS_LOG_FILE_DATA}->{working} =~ /Makefile/ ; } elsif ( /^total revisions:\s*([^;]*)/i ) { # $self->{CVS_LOG_FILE_DATA}->{TOTAL} = $1 ; # if ( /selected revisions:\s*(.*)/i ) { # $self->{CVS_LOG_FILE_DATA}->{SELECTED} = $1 ; # } } elsif ( /^symbolic names:/i ) { $self->{CVS_LOG_STATE} = 'tags' ; next ; } elsif ( /^description:/i ) { $self->{CVS_LOG_STATE} = 'desc' ; next ; } else { carp "Unhandled CVS log line '$_'" if /\S/ ; } } elsif ( $self->{CVS_LOG_STATE} eq 'tags' ) { if ( /^\S/ ) { $self->{CVS_LOG_STATE} = '' ; goto PLEASE_TRY_AGAIN ; } my ( $tag, $rev ) = m{(\S+):\s+(\S+)} ; unless ( defined $tag ) { carp "Can't parse tag from CVS log line '$_'" ; $self->{CVS_LOG_STATE} = '' ; next ; } # not actually needed # $self->{CVS_LOG_FILE_DATA}->{TAGS}->{$tag} = $rev ; push( @{$self->{CVS_LOG_FILE_DATA}->{RTAGS}->{$rev}}, $tag ) ; $self->branches->add( VCP::Branch->new( branch_id => $tag ) ) if $rev =~ /\.0\.\d+\z/; } elsif ( $self->{CVS_LOG_STATE} eq 'rev' ) { ( $self->{CVS_LOG_REV}->{rev_id} ) = m/([\d.]+)/ ; $self->{CVS_LOG_STATE} = 'rev_meta' ; next ; } elsif ( $self->{CVS_LOG_STATE} eq 'rev_meta' ) { for ( split /;\s*/ ) { my ( $key, $value ) = m/(\S+):\s+(.*?)\s*$/ ; $self->{CVS_LOG_REV}->{lc($key)} = $value ; } $self->{CVS_LOG_STATE} = 'rev_message' ; next ; } elsif ( $self->{CVS_LOG_STATE} eq 'rev_message' ) { $self->{CVS_LOG_REV}->{comment} .= $_ unless /\Abranches: .*;$/; } } ## Never, ever forget the last rev. "Wait for me! Wait for me!" ## Most of the time, this should not be a problem: cvs log puts a ## line of "=" at the end. But just in case I don't know of a ## funcky condition where that might not happen... unless ( defined $input ) { $self->_store_rev() ; $self->{CVS_LOG_REV} = undef ; $self->{CVS_LOG_FILE_DATA} = undef ; } } # Here's a (probably out-of-date by the time you read this) dump of the args # for _fill_in_rev: # ############################################################################### #$file = { # 'WORKING' => 'src/Eesh/eg/synopsis', ## 'SELECTED' => '2', # 'LOCKS' => 'strict', ## 'TOTAL' => '2', # 'ACCESS' => '', # 'RCS' => '/var/cvs/cvsroot/src/Eesh/eg/synopsis,v', # 'KEYWORD' => 'kv', # 'RTAGS' => { # '1.1' => [ # 'Eesh_003_000', # 'Eesh_002_000' # ] # }, # 'HEAD' => '1.2', ### 'TAGS' => { <== not used, so commented out. ### 'Eesh_002_000' => '1.1', ### 'Eesh_003_000' => '1.1' ### }, # 'BRANCH' => '' #}; #$rev = { # 'DATE' => '2000/04/21 17:32:16', # 'comment' => 'Moved a bunch of code from eesh, then deleted most of it. #', # 'STATE' => 'Exp', # 'AUTHOR' => 'barries', # 'REV' => '1.1' #}; ############################################################################### sub _fill_in_rev { my VCP::Source::cvs $self = shift ; my ( $file_data, $rev_data, $is_base_rev ) = @_ ; $file_data->{working} =~ s{([\\/])[\\/]+}{$1}g; my $norm_name = $self->normalize_name( $file_data->{working} ) ; my $action = $rev_data->{state} eq "dead" ? "delete" : "edit" ; my $type = defined $file_data->{keyword} && $file_data->{keyword} =~ /[o|b]/ ? "binary" : "text" ; #debug map "$_ => $rev_data->{$_}, ", sort keys %{$rev_data} if debugging $self; my $rev_id = $rev_data->{rev_id}; my $branch_id; my $previous_id; if ( $rev_id =~ /\A(\d+(?:\.\d+)+)\.(\d+)\.(\d+)\z/ ) { $previous_id = $self->denormalize_name( $norm_name ) . "#$1" if $3 eq "1"; my $magic_branch_number = "$1.0.$2"; $branch_id = exists $file_data->{RTAGS}->{$magic_branch_number} ? $file_data->{RTAGS}->{$magic_branch_number}->[0] : do { my $invented_tag = "_branch_$magic_branch_number"; # TODO: Consider what happens if two files brancehd # at the same revision number but aren't really in the # same branch. # # Also: consider doing invented branch consolidation # for files that branched around the same time. $self->branches->add( VCP::Branch->new( branch_id => $invented_tag ) ); $invented_tag; } } elsif ( ( $rev_id =~ tr/.// ) > 1 ) { die "Did not parse ${rev_id}'s branch number"; } my VCP::Rev $r = VCP::Rev->new( id => $self->denormalize_name( $norm_name ) . "#$rev_id", source_name => $file_data->{working}, name => $norm_name, rev_id => $rev_id, type => $type, action => $action, time => $self->parse_time( $rev_data->{date} ), user_id => $rev_data->{author}, comment => $rev_data->{comment}, state => $rev_data->{state}, labels => $file_data->{RTAGS}->{$rev_id}, branch_id => $branch_id, $action ne "delete" ? ( previous_id => $previous_id ) : (), ) ; $self->{CVS_NAME_REP_NAME}->{$file_data->{working}} = $file_data->{rcs} ; return $r; } ## FOOTNOTES: # [1] :pserver:guest@cvs.tigris.org:/cvs hass some goofiness like: #---------------------------- #revision 1.12 #date: 2000/09/05 22:37:42; author: thom; state: Exp; lines: +8 -4 # #merge revision history for cvspatches/root/log_accum.in #---------------------------- #revision 1.11 #date: 2000/08/30 01:29:38; author: kfogel; state: Exp; lines: +8 -4 #(derive_subject_from_changes_file): use \t to represent tab #characters, not the incorrect \i. #============================================================================= #---------------------------- #revision 1.11 #date: 2000/09/05 22:37:32; author: thom; state: Exp; lines: +3 -3 # #merge revision history for cvspatches/root/log_accum.in #---------------------------- #revision 1.10 #date: 2000/07/29 01:44:06; author: kfogel; state: Exp; lines: +3 -3 #Change all "Tigris" ==> "Helm" and "tigris" ==> helm", as per Daniel #Rall's email about how the tigris path is probably obsolete. #============================================================================= #---------------------------- #revision 1.10 #date: 2000/09/05 22:37:23; author: thom; state: Exp; lines: +22 -19 # #merge revision history for cvspatches/root/log_accum.in #---------------------------- #revision 1.9 #date: 2000/07/29 01:12:26; author: kfogel; state: Exp; lines: +22 -19 #tweak derive_subject_from_changes_file() #============================================================================= #---------------------------- #revision 1.9 #date: 2000/09/05 22:37:13; author: thom; state: Exp; lines: +33 -3 # #merge revision history for cvspatches/root/log_accum.in # =head1 SEE ALSO L, L, L. =head1 AUTHOR Barrie Slaymaker =head1 COPYRIGHT Copyright (c) 2000, 2001, 2002 Perforce Software, Inc. All rights reserved. See L (C) for the terms of use. =cut 1