#------------------------------------------------------------------------------ # Instance specific variables are set or calculated in this file. This file # is not intended to be sourced directly. It is sourced when the main SDP # environment file, /p4/common/bin/p4_vars, is sourced. This p4_N.vars file # is sourced as in the following example, where N is teh SDP instance name, # with a value of 1 by default: # # source /p4/common/bin/p4_vars N # # A line like the above can optionally be added in the ~/.bashrc file # of the perforce user on the Linux system. This is recommended so that # the SDP Environment is loaded properly during initial login. # #------------------------------------------------------------------------------ # When editing values in this file keep in mind the following: # # * Do not change values for which the comments say 'DO NOT CHANGE'. # * Do not add code or logic of any kind. # * Limit changes strictly to change the right-side of assignments (i.e. text # to the right of the '=' sign). # * Be careful not to introduce whitespace characters on either side of # the '=' sign. # # If custom logic is needed, e.g. to add host-specific behaviors or configure # multipe active brokers with different ports, add that custom logic in custom # local files that appear in the /p4/common/site directory. Files in the # 'site' directory will not be not affected by SDP upgrades. Also, files in the # 'site' directory are inherently custom and not officially supported by # Perforce Technical Support. # # If needed, custom logic goes into these files: # * /p4/common/site/config/p4_vars.local - Global/Common # * /p4/common/site/config/p4_N.vars.local - Instance-specifc (N=instance). # # This file contains comments of the form: # shellcheck disable=SCNNNN. # DO NOT CHANGE OR MOVE THESE COMMENT LINES. #------------------------------------------------------------------------------ # Disable shellcheck requirement for shebang line, as this file is sourced # in (from p4_vars) rather than executed as a script. # shellcheck disable=SC2148 #------------------------------------------------------------------------------ # shellcheck disable=SC2034 # SDP_INSTANCE_VARS_FORMAT defines the version of the format of this file, # used when the SDP is upgraded. DO NOT CHANGE SDP_INSTANCE_VARS_FORMAT. SDP_INSTANCE_VARS_FORMAT=1.13 # This file is processed by mkdirs.sh to update REPL_* values as appropriate. # It can subsequently be edited if required. # Various scripts send email to $MAILTO. This can contain comma-delimited list # of email addresses (no spaces). The addresses specified here are generally # those of individual Perforce Helix administrators, and/or to an email # distribution list of administrators. export MAILTO=REPL_MAILTO # Specify the email address from which emails are sent in $MAILFROM. # This must be exactly one email address. The value typically looks something # like P4Admin@example.com. # NOTE: Many modern email services, such as Office365 and Google Workspaces, # may require that the domain name in the email address from which emails are # sent be the correct domain for your company. For example, if your company's # domain for email is example.com, the email server may require that any emails # sent from that domain also end in @example.com. export MAILFROM=REPL_MAILFROM # This is the P4USER that is the super user. This user must have a unlimited # ticket valid on the master Perforce Helix server machine. export P4USER=REPL_ADMINUSER # Service user definition. DO NOT CHANGE P4SERVICEUSER. export P4SERVICEUSER=svc_${SERVERID} # P4MASTER_ID is server.id of Master for this instance export P4MASTER_ID=REPL_MASTER_ID # If this instance uses SSL, set SSL_PREFIX to ssl:, ssl4:, ssl6:, # ssl46:, or ssl64:. See: https://portal.perforce.com/s/article/1180 # The trailing colon is required. export SSL_PREFIX=REPL_SSLPREFIX # Set the numeric portion of the P4PORT value used for p4d. export P4PORTNUM=REPL_P4PORT # This P4PORT value is calculated. DO NOT CHANGE P4PORT. export P4PORT=${SSL_PREFIX}${P4PORTNUM} # Set the value for P4BROKERPORT to Unset if the broker is not # used. export P4BROKERPORTNUM=REPL_P4BROKERPORT # This is the broker port. To test broker connections, you # can use a command like: p4 -p $P4BROKERPORT info # DO NOT CHANGE P4BROKERPORT. export P4BROKERPORT=${SSL_PREFIX}${P4BROKERPORTNUM} # These $P4D_FLAGS show when using 'ps' to scan the process table. # Other environment variables and 'p4 configure' settings can affect # p4d even if not listed on the command line. # DO NOT CHANGE P4D_FLAGS. export P4D_FLAGS="-p $P4PORT -r $P4ROOT -J $P4JOURNAL -L $P4LOG -q -d --pid-file" # Default values of the following - may be overwritten below # P4MASTERHOST=DNS Name (or IP address) of the commit server # for this instance. If DNS is not available, /etc/hosts # entries may be used to simulate DNS. export P4MASTERHOST=REPL_P4MASTERHOST # The P4MASTERPORT is the P4PORT value of the commit server, used # by replicas, proxies, and standalone brokers. This incorporates # teh DNS name of the commit server. # DO NOT CHANGE P4MASTERPORT. export P4MASTERPORT=${SSL_PREFIX}${P4MASTERHOST}:${P4PORTNUM} # P4REPLICA is calculated. DO NOT CHANGE P4REPLICA. export P4REPLICA=FALSE # SHAREDDATA defaults FALSE, but is set to TRUE on replica servers that share their /hxdepots # volume with their P4TARGET server - as per lbr.replication configurable # DO NOT CHANGE SHAREDDATA. export SHAREDDATA=FALSE # SERVERID is defined in /p4/N/root/server.id. DO NOT CHANGE SERVERID. if [[ -n "$SERVERID" && "$SERVERID" != "$P4MASTER_ID" ]]; then export P4REPLICA=TRUE TmpP4ROOT= if [[ -f "$P4ROOT/db.config" && ! -f "$P4ROOT/P4ROOT_not_usable.txt" ]]; then TmpP4ROOT=$(mktemp -d "$P4TMP/tmp.p4root.XXXXXX") cp "$P4ROOT/db.config" "$TmpP4ROOT/." # Use egrep because it works where we need it to. Shellcheck suggests # using 'grep -E' instead. # shellcheck disable=SC2196 targetServerPort=$("$P4DBIN" -r "$TmpP4ROOT" -cshow | egrep "^$SERVERID: P4TARGET = ") targetServerPort=${targetServerPort##* = } # Use 'echo' w/o quotes to remove leading/trailing whitespace. # shellcheck disable=SC2116 disable=SC2086 targetServerPort=$(echo $targetServerPort) else targetServerPort= fi if [[ -n "$targetServerPort" ]]; then export P4MASTERPORT="$targetServerPort" if [[ "$targetServerPort" == *":"* ]]; then # strip off any trailing ':.....' element (e.g., ':1666') export P4MASTERHOST="${targetServerPort%:*}" # if P4TARGET includes ssl, also need to strip off ssl: from front export P4MASTERHOST="${P4MASTERHOST#*:}" fi fi repStyle="readonly" if [[ -f "$P4ROOT/db.config" && ! -f "$P4ROOT/P4ROOT_not_usable.txt" ]]; then repStyle=$("$P4DBIN" -r "$P4ROOT" -cshow|"$GREP" "^$SERVERID: lbr.replication = ") repStyle=${repStyle##* = } # Use 'echo' w/o quotes to remove leading/trailing whitespace. # shellcheck disable=SC2116 disable=SC2086 repStyle=$(echo $repStyle) fi if [[ $repStyle == "shared" ]]; then # Used by p4verify.sh among others export SHAREDDATA=TRUE fi [[ -n "$TmpP4ROOT" ]] && rm -rf "$TmpP4ROOT/" fi # Proxy settings export PROXY_TARGET=${SSL_PREFIX}${P4MASTERHOST}:${P4BROKERPORTNUM} export PROXY_PORT=${SSL_PREFIX}$((P4BROKERPORTNUM+1)) # Set Proxy monitoring level to 3 in order to monitor all traffic for all operations export PROXY_MON_LEVEL=3 # Add '-u $P4SERVICEUSER' to PROXY_V_FLAGS if required, i.e. if security >= 5. export PROXY_V_FLAGS="-e 3072 -v proxy.monitor.level=${PROXY_MON_LEVEL:-3} -v net.autotune=1" # P4DTG Settings: export P4DTG_CFG=$P4SERVER # If SNAPSHOT_SCRIPT is defined and set to the path of an executable # script, daily_checkpoint.sh will call the referenced scrip after # checkpoints are created. It is expected that the called custom script # will create a snapshot or perform some other backup activity. # The logic below allows for the called SNAPSHOT_SCRIPT to run only # on the master server. # # A sample script to enable snapshots on an AWS master # server is provided as: /p4/common/cloud/aws/bin/snapshot.sh # if [[ -n "$SERVERID" && "$SERVERID" == "$P4MASTER_ID" ]]; then # This snapshot script is exectued only on the master server. export SNAPSHOT_SCRIPT= else # Leave this value empty. export SNAPSHOT_SCRIPT= fi # Set VERIFY_SDP_SKIP_TEST_LIST as an alternative to passing in a lists of tests # using the '-skip' flag to the verify_sdp.sh script. The command line flag to # the script is more appropriate if a test is to be skipped temporarily, while # setting the VERIFY_SDP_SKIP_TEST_LIST variable is better for making a permanent # exception (e.g. skipping crontab checks if some other scheduler is used). # # The value is a comma-delimited list of tests to skip, as defined in the # documentation for verify_sdp.sh. For more info, run: verify_sdp.sh -man # # Valid test names are: # * cron|crontab: Skip crontab check. Use this if you do not expect crontab to # be configured, perhaps if you use a different scheduler. # * excess: Skip checks for excess copies of p4d/p4p/p4broker in PATH. # * init: Skip compare of init scripts w/templates in /p4/common/etc/init.d # * license: Skip license related checks. # * commitid: Skip check ensuring ServerID of commit starts with 'commit' or 'master'. # * masterid: Synonym for commitid. # * offline_db: Skip checks that require a healthy offline_db. # * p4root: Skip checks that require healthy P4ROOT db files. # * p4t_files: Skip checks for existence of P4TICKETS and P4TRUST files. # * passwd|password: Skip SDP password checks. # * version: Skip version checks. export VERIFY_SDP_SKIP_TEST_LIST= export SDP_ALWAYS_LOGIN=0 # The SDP_MAX_START_DELAY_* settings are numeric values that define the maximum # number of second to wait for services to start before considering the startup # a failure in various SDP scripts. Successful start is indicated by being # responsive to a 'p4 info' command and the appropriate port for each service. export SDP_MAX_START_DELAY_P4D=120 export SDP_MAX_START_DELAY_P4BROKER=60 export SDP_MAX_START_DELAY_P4P=60 # The SDP_MAX_STOP_DELAY_* settings are numeric values that define the maximum # number of second to wait for services to stop before considering the shutdown # a failure in various SDP scripts. Successful stop is indicated by removal of # the server.pid file for p4d, and lack of active pids for p4broker/p4p. These # values are typically never used. Note that 'p4d' does not have a max delay. export SDP_MAX_STOP_DELAY_P4BROKER=600 export SDP_MAX_STOP_DELAY_P4P=600 # Set SDP_AUTOMATION_USERS to a comma-delimited list of Perforce user accounts # to login when the 'p4login' script is used with the '-automation' flag. This # will normally be a list of users that operate trigger scripts, such as the # 'swarm' user if Helix Swarm is used. Typically such users will have long-term # tickets. For more info, run: p4login -man export SDP_AUTOMATION_USERS="swarm" # Set DO_PARALLEL_CHECKPOINTS=0 to disable parallel checkpoints. # # Set DO_PARALLEL_CHECKPOINTS=N to enable parallel checkpoints, where N # is a positive integer indicating the number of parallel threads to use. # As a special case, setting DO_PARALLEL_CHECKPOINTS=1 is the same as # setting DO_PARALLEL_CHECKPOINTS=4. The N value is passed to the p4d # with the '-N' parameter when doing checkpoint create, dump, and # replay options with 'p4d -jcp', 'p4d -jdp', and 'p4d -jrp', # respetively. # # If parallel checkpoints are enabled: # * The live_checkpoint.sh will create live checkpoints using 'p4d -jcp', and # replay using 'p4d -jrp'. # * The daily_checkpoint.sh will create offline checkpoints using 'p4d -jdp', # and replay using 'p4d -jrp'. # * The recover_offline_db.sh will look for checkpoint directories rather # than singular checkpoint files, and replay with 'p4d -jrp'. # * The refresh_P4ROOT_from_offline_db.sh replays using 'p4d -jrp'. # # The db.checkpoint.threads configurable is ignored with the scripts, as # the '-N' parameter overrides configurable. # # Parallel checkpoints became available in p4d 2022.2. This setting is # ignored if the server version is lower than that. export DO_PARALLEL_CHECKPOINTS=0 umask 0026 #------------------------------------------------------------------------------ # Custom Local Changes #------------------------------------------------------------------------------ # Any instance-specific local customizations should appear in the file sourced # below in the /p4/common/site structure, which contains site-specific that # are not part of the SDP package. if [[ -d "/p4/common/site/config/$P4SERVER.vars.local.d" ]]; then # shellcheck disable=SC1090 for f in /p4/common/site/config/$P4SERVER.vars.local.d/*; do source $f; done fi if [[ -r "/p4/common/site/config/$P4SERVER.vars.local" ]]; then # shellcheck disable=SC1090 source "/p4/common/site/config/$P4SERVER.vars.local" fi