<HTML>
<TITLE> Jam - Make(1) Redux </TITLE>
<BODY>
<CENTER>
<H1> Jam - Make(1) Redux </H1>
<P> The <a href=http://www.perforce.com/jam/jam.html>Jam</a> Executable
</CENTER>
<DL>
<DT> <P> <H2> USAGE </H2> <DD>
<PRE>
jam [ -a ] [ -g ] [ -n ] [ -q ] [ -v ]
[ -d <I>debug</I> ]
[ -f <I>jambase</I> ]
[ -j <I>jobs</I> ]
[ -o <I>actionsfile</I> ]
[ -s <I>var</I>=<I>value</I> ]
[ -t <I>target</I> ]
[ <I>target</I> ... ]
</PRE>
<DT> <P> <H2> DESCRIPTION </H2> <DD>
<P>
<B>Jam</B> is a program construction tool, like <B>make</B>(1).
<P>
<B>Jam</B> recursively builds target files from source files,
using dependency information and updating actions expressed in
the Jambase file, which is written in <B>jam</B>'s own interpreted
language. The default Jambase is compiled into <B>jam</B> and
provides a boilerplate for common use, relying on a user-provide
file "Jamfile" to enumerate actual targets and sources.
<P>
The Jambase is described in the <a href="Jambase.html">Jambase
Reference</a> and the document <a href="Jamfile.html">Using
Jamfiles and Jambase</A>.
<DT> <P> <H2> OPTIONS </H2> <DD>
<P>
If <I>target</I> is provided on the command line, <B>jam</B>
builds <I>target;</I> otherwise <B>jam</B> builds the target
'all'.
<P>
<B>Jam</b> may be invoked with the following options:
<P> <TABLE WIDTH=85% ALIGN=CENTER BORDER=1 CELLPADDING=2>
<TR><TD VALIGN=TOP WIDTH=20%><CODE> -a </CODE>
<TD> Build all targets anyway, even if they are up-to-date.
<TR><TD VALIGN=TOP><CODE> -d <I>c</I> </CODE>
<TD> Turn on display option <I>c</I> and off the default
display (summary info and actions):
<DL COMPACT>
<DT> a <DD> Show summary info, actions, quiet actions, and the
use of temporary targets
<DT> c <DD> Show the names of files that cause rebuilds, i.e.
new sources, missing targets, etc.
<DT> d <DD> Display a dependency graph (in <B>jam</B> syntax).
<DT> m <DD> Display the dependency analysis, and target/source
timestamps and paths
<DT> x <DD> Show shell arguments
</DL>
<TR><TD VALIGN=TOP><CODE> -d <I>n</I> </CODE>
<TD> Enable cummulative debugging levels from 1 to <I>n</I>.
Interesting values are:
<DL COMPACT>
<DT> 1 <DD> Show actions and summary info (the default)
<DT> 3 <DD> Old name for -dm (described above)
<DT> 5 <DD> Show rule invocations and variable expansions
<DT> 6 <DD> Show directory/header file/archive scans
<DT> 7 <DD> Show variable settings
<DT> 8 <DD> Show variable fetches
<DT> 9 <DD> Show variable manipulation, scanner tokens
</DL>
<TR><TD VALIGN=TOP><CODE> -d +<I>n</I> </CODE>
<TD> Enable debugging level <I>n</I>.
<TR><TD VALIGN=TOP><CODE> -d 0 </CODE>
<TD> Turn off all debugging levels. Only errors are emitted.
<TR><TD VALIGN=TOP><CODE> -f <I>jambase</I></CODE>
<TD>Read <I>jambase</I> instead of using the built-in Jambase.
Multiple -f flags are permitted.
<TR><TD VALIGN=TOP><CODE> -g </CODE>
<TD> Build targets with the newest sources first, rather than
in the order of appearance in the Jambase/Jamfiles.
<TR><TD VALIGN=TOP><CODE> -j <I>n</I></CODE>
<TD> Run up to <I>n</I> shell commands concurrently (UNIX
and NT only). The default is 1.
<TR><TD VALIGN=TOP><CODE> -n</CODE>
<TD> Don't actually execute the updating actions, but do
everything else. This changes the debug level to -dax.
<TR><TD VALIGN=TOP><CODE> -o <I>file</I></CODE>
<TD> Write the updating actions to the specified file instead
of running them (or outputting them, as on the Mac).
<TR><TD VALIGN=TOP><CODE> -q </CODE>
<TD> Quit quickly (as if an interrupt was received)
as soon as any target build fails.
<TR><TD VALIGN=TOP><CODE> -s <I>var</I>=<I>value</I></CODE>
<TD> Set the variable <I>var</I> to <I>value</I>, overriding
both internal variables and variables imported from the
environment.
<TR><TD VALIGN=TOP><CODE> -t <I>target</I></CODE>
<TD> Rebuild <I>target</I> and everything that depends on it,
even if it is up-to-date.
<TR><TD VALIGN=TOP><CODE> -v</CODE>
<TD> Print the version of <B>jam</B> and exit.
</TABLE>
<DT> <P> <H2> OPERATION </H2> <DD>
<P>
<b>Jam</b> has four phases of operation: start-up, parsing,
binding, and updating.
<DT> <P> <H3> Start-up </H3> <DD>
<P>
Upon start-up, <b>jam</b> imports environment variable settings
into <b>jam</b> variables. Environment variables are split at
blanks with each word becoming an element in the variable's list
of values. Environment variables whose names end in PATH are
split at $(SPLITPATH) characters (e.g., ":" for Unix).
<P>
To set a variable's value on the command line, overriding the
variable's environment value, use the -s option. To see variable
assignments made during <b>jam</b>'s execution, use the -d+7
option.
<DT> <P> <H3> Parsing </H3> <DD>
<P>
In the parsing phase, <b>jam</b> reads and executes the Jambase
file, by default the built-in one. It is written in the <b>jam</b>
language. See <a href="#language"> Language</a> below. The
last action of the Jambase is to read (via the "include" rule)
a user-provided file called "Jamfile".
<P>
Collectively, the purpose of the Jambase and the Jamfile is to
name built target and source files, construct the dependency
graph among them, and associate build actions with targets.
The Jambase defines boilerplate rules and variable assignments,
and the Jamfile uses these to specify the actual relationship
among the target and source files. See the <a
href="Jambase.html">Jambase Reference</a> and the document <a
href="Jamfile.html">Using Jamfiles and Jambase</A> for information.
<A NAME="binding">
<DT> <P> <H3> Binding </H3> <DD>
</A>
<P> <H5> Binding </H5>
After parsing, <B>jam</B> recursively descends the dependency
graph and binds every file target with a location in the
filesystem.
<P> <H5> Targets </H5> <DD>
Any string value in <b>jam</b> can represent a target, and it
does so if the DEPENDS or INCLUDES rules make it part of the
dependency graph. Build targets are files to be updated. Source
targets are the files used in updating build targets. Build
targets and source targets are collectively referred to as file
targets, and frequently build targets are source targets for
other build targets. Pseudotargets are symbols which represent
dependencies on other targets, but which are not themselves
associated with any real file.
<P>
A file target's identifier is generally the file's name, which can
be absolutely rooted, relative to the directory of <b>jam</b>'s
invocation, or simply local (no directory). Most often it is the
last case, and the actual file path is bound using the $(SEARCH)
and $(LOCATE) special variables. See <A HREF="#search"> SEARCH
and LOCATE Variables</A> below. A local filename is optionally
qualified with "grist," a string value used to assure uniqueness.
A file target with an identifier of the form <I>file(member)</I>
is a library member (usually an ar(1) archive on UNIX).
<P>
The use of $(SEARCH) and $(LOCATE) allows <b>jam</b> to separate
the the location of files from their names, so that Jamfiles can
refer to files locally (i.e. relative to the Jamfile's directory),
yet still be usable when <b>jam</b> is invoked from a distant
directory. The use of grist allows files with the same name
to be identified uniquely, so that <b>jam</b> can read a whole
directory tree of Jamfiles and not mix up same-named targets.
<P> <H5> Update Determination </H5>
After binding each target, <B>jam</B> determines whether the
target needs updating, and if so marks the target for the updating
phase. A target is normally so marked if it is missing, it is
older than any of its sources, or any of its sources are marked
for updating. This behavior can be modified by the application
of special built-in rules. See <A HREF="#bindingmods">Modifying
Binding</A> below.
<P> <H5> Header File Scanning </H5>
During the binding phase, <b>jam</b> also performs header file
scanning, where it looks inside source files for the implicit
dependencies on other files caused by C's #include syntax. This
is controlled by the special variables $(HDRSCAN) and $(HDRRULE).
The result of the scan is formed into a rule invocation, with
the scanned file as the target and the found included file names
as the sources. Note that this is the only case where rules
are invoked outside the parsing phase. See <A
HREF="#hdrscan">HDRSCAN and HDRRULE Variables</A> below.
<DT> <P> <H3> Updating </H3> <DD>
<P>
After binding, <B>jam</B> again recursively descends the dependency
graph, this time executing the update actions for each target
marked for update during the binding phase. If a target's
updating actions fail, then all other targets which depend on
that target are skipped.
<P>
The -j flag instructs <B>jam</B> to build more than one target
at a time. If there are multiple actions on a single target,
they are run sequentially. The -g flag reorders builds so that
targets with newest sources are built first. Normally, they are
built in the order of appearance in the Jamfiles.
<A NAME="language">
<DT> <P> <H2> LANGUAGE </H2> <DD>
</A>
<DT> <P> <H3> Overview </H3> <DD>
<B>Jam</b> has a interpreted, procedural language with a few
select features to effect program construction. Statements in
<b>jam</b> are rule (procedure) definitions, rule invocations,
updating action definitions, flow-of-control structures, variable
assignments, and sundry language support.
<DT> <P> <H3> Lexical Features </H3> <DD>
<P>
<B>Jam</b> treats its input files as whitespace-separated tokens,
with two exceptions: double quotes (") can enclose whitespace to
embed it into a token, and everything between the matching curly
braces ({}) in the definition of a updating actions is treated
as a single string. A backslash (\) can escape a double quote,
or any single whitespace character.
<P>
<B>Jam</b> requires whitespace (blanks, tabs, or newlines) to
surround all tokens, <b>including the colon (:) and semicolon
(;) tokens</b>.
<P>
<B>Jam</b> keywords (as mentioned in this document) are reserved
and generally must be quoted with double quotes (") to be used
as arbitrary tokens, such as variable or target names.
<DT> <P> <H3> Datatype </H3> <DD>
<P>
<B>Jam</B>'s only data type is a one-dimensional list of arbitrary
strings. They arise as literal (whitespace-separated) tokens in
the Jambase or included files, as the result of variable expansion
of those tokens, or as the return value from a rule invocation.
<DT> <P> <H3> Rules </H3> <DD>
<P>
The basic <B>jam</b> language entity is called a rule. A rule
is simply a procedure definition, with a body of <b>jam</b>
statements to be run when the rule is invoked. The syntax of
rule invocation make it possible to write Jamfiles that look
a bit like Makefiles.
<P>
Rules take up to 9 arguments ($(1) through $(9), each a list)
and can have a return value (a single list). A rule's return
value can be expanded in a list by enclosing the rule invocation
with <tt>[</tt> and <tt>]</tt>.
<DT> <P> <H3> Updating Actions </H3> <DD>
<P>
A rule may have updating actions associated with it, in which
case arguments $(1) and $(2) are treated as built targets and
sources, respectively. Updating actions are the OS shell commands
to execute when updating the built targets of the rule.
<P>
When an rule with updating actions is invoked, those actions are
added to those associated with its built targets ($(1)) before
the rule's procedure is run. Later, to build the targets in the
updating phase, the actions are passed to the OS command shell,
with $(1) and $(2) replaced by bound versions of the target names.
See <A HREF="#binding"> Binding</A> above.
<DT> <P> <H3> Statements </H3> <DD>
<P>
<b>Jam</b>'s langauge has the following statements:
<P><TABLE WIDTH=75% ALIGN=CENTER><TR><TD><DL>
<P> <DT> <CODE>
<I>rulename field1</I> : <I>field2</I> : <I>...</I>
: <I>fieldN</I> ;
</CODE>
<P><DD> Invoke a rule. A rule is invoked with values in
<I>field1</I> through <I>fieldN</I> (9 max). They may be
referenced in the procedure's <I>statements</I> as $(1)
through $(<9>N</I>). $(<) and $(>) are synonymous
with $(1) and $(2).
<P>
<i>rulename</i> undergoes <A HREF="#varexp"> variable
expansion</A>. If the resulting list is more than one value,
each rule is invoked with the same arguments, and the result
of the invocation is the concatenation of all the results.
<P> <DT> <CODE>
actions [ <I>modifiers</I> ] <I>rulename</I> { <I>commands</I> }
</CODE>
<P><DD> Define a rule's updating actions, replacing any previous
definition. The first two arguments may be referenced in
the action's <I>commands</I> as $(1) and $(2) or $(<)
and $(>).
<P>
The following action <i>modifiers</i> are understood:
<P><TABLE BORDER=1>
<TR><TD WIDTH=30%><CODE> actions bind <I>vars</I> </CODE></TD>
<TD> $(vars) will be replaced with bound values.</TD>
</TR>
<TR><TD><CODE> actions existing </CODE></TD>
<TD> $(>) includes only source targets currently existing.</TD>
</TR>
<TR><TD><CODE> actions ignore </CODE></TD>
<TD> The return status of the <I>commands</I> is ignored.</TD>
</TR>
<TR><TD><CODE> actions piecemeal </CODE></TD>
<TD> <I>commands</I> are repeatedly invoked with a subset
of $(>) small enough to fit in the command buffer on this
OS.</TD>
</TR>
<TR><TD><CODE> actions quietly </CODE></TD>
<TD> The action is not echoed to the standard output.</TD>
</TR>
<TR><TD><CODE> actions together </CODE></TD>
<TD> The $(>) from multiple invocations of the same action
on the same built target are glommed together.</TD>
</TR>
<TR><TD><CODE> actions updated </CODE></TD>
<TD> $(>) includes only source targets themselves marked
for updating.</TD>
</TR>
</TABLE>
<P><DT><CODE>
break
</CODE>
<P><DD> Breaks out of the closest enclosing <I>for</I>
or <I>while</I> loop.
<P><DT><CODE>
continue
</CODE>
<P><DD> Jumps to the end of the closest enclosing <I>for</I>
or <I>while</I> loop.
<P><DT><CODE>
for <I>var</I> in <I>list</I> { <I>statements</I> }
</CODE>
<P><DD> Executes <i>statements</i> for each element in
<i>list</i>, setting the variable <i>var</i> to the element
value.
<A name=if>
<P><DT><CODE>
</A>
if <I>cond</I> { <I>statements</I> } [ else <I>statement</I> ]
</CODE>
<P><DD> Does the obvious; the else clause is optional.
<i>cond</i> is built of:
<TABLE BORDER=1>
<TR><TD WIDTH=25%> <CODE><I>a</I></CODE></TD>
<TD> true if any <I>a</I> element is a non-zero-length
string</TD>
<TR><TD> <CODE><I>a</I> = <I>b</I></CODE> </TD>
<TD> list <I>a</I> matches list <I>b</I>
string-for-string</TD>
<TR><TD> <CODE><I>a</I> != <I>b</I> </CODE></TD>
<TD> list <I>a</I> does not match list <I>b</I></TD>
<TR><TD> <CODE><I>a</I> < <I>b</I> </CODE></TD>
<TD> <I>a[i]</I> string is less than <I>b[i]</I>
string, where <i>i</i> is first mismatched element
in lists <I>a</I> and <I>b</I></TD>
<TR><TD> <CODE><I>a</I> <= <I>b</I> </CODE></TD>
<TD> every <I>a</I> string is less than or equal to
its <I>b</I> counterpart</TD>
<TR><TD> <CODE><I>a</I> > <I>b</I> </CODE></TD>
<TD> <I>a[i]</I> string is greater than <I>b[i]</I>
string, where <i>i</i> is first mismatched element</TD>
<TR><TD> <CODE><I>a</I> >= <I>b</I> </CODE></TD>
<TD> every <I>a</I> string is greater than or equal to
its <I>b</I> counterpart</TD>
<TR><TD> <CODE><I>a</I> in <I>b</I> </CODE></TD>
<TD> true if all elements of <I>a</I> can be found
in <I>b</I>, or if <I>a</I> has no elements</TD>
<TR><TD> <CODE>! <I>cond</I> </CODE></TD>
<TD> condition not true</TD>
<TR><TD> <CODE><I>cond</I> && <I>cond</I> </CODE></TD>
<TD> conjunction</TD>
<TR><TD> <CODE><I>cond</I> || <I>cond</I> </CODE></TD>
<TD> disjunction</TD>
<TR><TD> <CODE>( <I>cond</I> ) </CODE></TD>
<TD> precedence grouping</TD>
</TABLE>
<P><DT> <CODE>
include <I>file</I> ;
</CODE>
<P><DD> Causes <b>jam</b> to read the named <i>file</i>.
The file is bound like a regular target (see <A
HREF="#binding"> Binding</A> above) but unlike a regular
target the include file cannot be built. Marking an include
file target with the <b>NOCARE</b> rule makes it optional:
if it is missing, it causes no error.
<P>
The include file is inserted into the input stream during
the parsing phase. The primary input file and all the included
file(s) are treated as a single file; that is, <b>jam</b>
infers no scope boundaries from included files.
<P><DT> <CODE>
local <i>vars</I> [ = <i>values</i> ] ;
</CODE>
<P><DD> Creates new <i>vars</i> inside to the enclosing {}
block, obscuring any previous values they might have. The
previous values for <i>vars</i> are restored when the current
block ends. Any rule called or file included will see the
local and not the previous value (this is sometimes called
Dynamic Scoping). The local statement may appear anywhere,
even outside of a block (in which case the previous value
is restored when the input ends). The <i>vars</i> are
initialized to <i>values</i> if present, or left uninitialized
otherwise.
<P> <DT> <CODE>
on <I>target</I> <I>statement</I> ;
</CODE>
<P><DD> Run <I>statement</I> under the influence of
<I>target</I>'s target-specific variables. These variables
become local copies during <I>statement</I>'s run, but they
may be updated as target-specific variables using the usual
"<I>variable</I> on <I>targets</I> =" syntax.
<P><DT> <CODE>
return <I>values</I> ;
</CODE>
<P><DD> Within a rule body, the return statement sets the return
value for an invocation of the rule and terminates the rule's
execution.
<P> <DT> <CODE>
rule <I>rulename</I> [ : <I>vars</I> ] { <I>statements</I> }
</CODE>
<P><DD> Define a rule's procedure, replacing any previous
definition. If <I>vars</I> are provided, they are assigned
the values of the parameters ($(1) to $(9)) when <I>statements</I>
are executed, as with the <B>local</B> statement.
<P><DT> <CODE>
<A NAME="switch">
switch <I>value</I>
</A>
<BR> {
<BR> case <I>pattern1</I> : <I>statements</I> ;
<BR> case <I>pattern2</I> : <I>statements</I> ;
<BR> ...
<BR> }
</CODE>
<P><DD> The switch statement executes zero or one of the
enclosed <i>statements</i>, depending on which, if any, is
the first case whose <i>pattern</I> matches <i>value</i>.
The <i>pattern</I> values are not variable-expanded. The
<i>pattern</I> values may include the following wildcards:
<TABLE>
<TR><TD><CODE> ? </CODE></TD>
<TD> match any single character </TD>
<TR><TD><CODE> * </CODE></TD>
<TD> match zero or more characters </TD>
<TR><TD><CODE> [<i>chars</i>] </CODE></TD>
<TD> match any single character in <i>chars</i> </TD>
<TR><TD><CODE> [^<i>chars</i>] </CODE></TD>
<TD> match any single character not in <i>chars</i> </TD>
<TR><TD><CODE> \<i>x</i> </CODE></TD>
<TD> match <i>x</i> (escapes the other wildcards)</i> </TD>
</TABLE>
<P><DT> <CODE>
while <I>cond</I> { <I>statements</I> }
</CODE>
<P><DD> Repeatedly execute <I>statements</I> while <I>cond</I>
remains true upon entry. (See the description of <I>cond</I>
expression syntax under <a href="#if">if</a>, above).
</DL></TABLE>
<DT> <P> <H3> Variables </H3> <DD>
<P>
<B>Jam</b> variables are lists of zero or more elements, with
each element being a string value. An undefined variable is
indistinguishable from a variable with an empty list, however,
a defined variable may have one more elements which are null
strings. All variables are referenced as $(<I>variable</I>).
<P>
Variables are either global or target-specific. In the latter
case, the variable takes on the given value only during the
target's binding, header file scanning, and updating; and during
the "on <I>target</I> <I>statement</I>" statement.
<P>
A variable is defined with:
<P> <TABLE WIDTH=75% ALIGN=CENTER> <TR><TD> <DL>
<DT><CODE>
<I>variable</I> = <I>elements</I> ; </CODE>
<DT><CODE>
<I>variable</I> += <I>elements</I> ; </CODE>
<DT><CODE>
<I>variable</I> ?= <I>elements</I> ; </CODE>
<DT><CODE>
<I>variable</I> on <I>targets</I> = <I>elements</I> ; </CODE>
<DT><CODE>
<I>variable</I> on <I>targets</I> += <I>elements</I> ; </CODE>
<DT><CODE>
<I>variable</I> on <I>targets</I> ?= <I>elements</I> ; </CODE>
</DL></TABLE>
<P>
The first three forms set <I>variable</I> globally. The last
three forms set a target-specific variable. The = operator
replaces any previous elements of <I>variable</I> with
<I>elements</I>; the += operation adds <I>elements</I> to
<I>variable</I>'s list of elements; the ?= operator sets
<I>variable</I> only if it was previously unset. The last form
"<I>variable</I> on <I>targets</I> ?= <I>elements</I>" checks
to see if the target-specific, not the global, variable is set.
(The ?= operator also has an old form "default =".)
<P>
Variables referenced in updating commands will be replaced with
their values; target-specific values take precedence over global
values. Variables passed as arguments ($(1) and $(2)) to actions
are replaced with their bound values; the "bind" modifier can
be used on actions to cause other variables to be replaced with
bound values. See <A HREF="#actionmods">Action Modifiers</A>
above.
<P>
<B>Jam</b> variables are not re-exported to the environment of
the shell that executes the updating actions, but the updating
actions can reference <b>jam</b> variables with $(<I>variable</I>).
<A NAME="varexp">
<DT> <P> <H3> Variable Expansion </H3> <DD>
</A>
<P>
During parsing, <b>jam</b> performs variable expansion on each
token that is not a keyword or rule name. Such tokens with
embedded variable references are replaced with zero or more
tokens. Variable references are of the form $(<I>v</I>) or
$(<I>vm</I>), where <i>v</i> is the variable name, and <I>m</I>
are optional modifiers.
<P>
Variable expansion in a rule's actions is similar to variable
expansion in statements, except that the action string is
tokenized at whitespace regardless of quoting.
<P>
The result of a token after variable expansion is the
<i>product</i> of the components of the token, where each
component is a literal substring or a list substituting a variable
reference. For example:
<P> <TABLE WIDTH=75% ALIGN=CENTER><TR><TD><CODE>
<BR>$(X) -> a b c
<BR>t$(X) -> ta tb tc
<BR>$(X)z -> az bz cz
<BR>$(X)-$(X) -> a-a a-b a-c b-a b-b b-c c-a c-b c-c
</CODE></TABLE>
<P>
The variable name and modifiers can themselves contain
a variable reference, and this partakes of the product
as well:
<P> <TABLE WIDTH=75% ALIGN=CENTER><TR><TD><CODE>
<BR>$(X) -> a b c
<BR>$(Y) -> 1 2
<BR>$(Z) -> X Y
<BR>$($(Z)) -> a b c 1 2
</CODE></TABLE>
<P>
Because of this product expansion, if any variable reference in
a token is undefined, the result of the expansion is an empty
list. If any variable element is a null string, the result
propagates the non-null elements:
<P> <TABLE WIDTH=75% ALIGN=CENTER><TR><TD><CODE>
<BR>$(X) -> a ""
<BR>$(Y) -> "" 1
<BR>$(Z) ->
<BR>*$(X)$(Y)* -> *a* *a1* ** *1*
<BR>*$(X)$(Z)* ->
</CODE></TABLE>
<P>
A variable element's string value can be parsed into grist and
filename-related components. Modifiers to a variable are used
to select elements, select components, and replace components.
The modifiers are:
<P> <TABLE WIDTH=75% BORDER=1 ALIGN=CENTER>
<TR><TD><CODE> [<I>n</I>] </CODE>
<TD>Select element number <I>n</I> (starting at 1). If
the variable contains fewer than <I>n</I> elements,
the result is a zero-element list.
<TR><TD><CODE> [<I>n</I>-<I>m</I>] </CODE>
<TD>Select elements number <I>n</I> through <I>m</I>.
<TR><TD><CODE> [<I>n</I>-] </CODE>
<TD>Select elements number <I>n</I> through the last.
<TR><TD><CODE> :B </CODE>
<TD>Select filename base.
<TR><TD><CODE> :S </CODE>
<TD>Select (last) filename suffix.
<TR><TD><CODE> :M </CODE>
<TD>Select archive member name.
<TR><TD><CODE> :D </CODE>
<TD>Select directory path.
<TR><TD><CODE> :P </CODE>
<TD>Select parent directory.
<TR><TD><CODE> :G </CODE>
<TD>Select grist.
<TR><TD><CODE> :U </CODE>
<TD>Replace lowercase characters with uppercase.
<TR><TD><CODE> :L </CODE>
<TD>Replace uppercase characters with lowercase.
<TR><TD><CODE> :<i>chars</I> </CODE>
<TD>Select the components listed in <i>chars</i>.
<TR><TD><CODE> :G=<I>grist</I> </CODE>
<TD>Replace grist with <I>grist</I>.
<TR><TD><CODE> :D=<I>path</I> </CODE>
<TD>Replace directory with <I>path</I>.
<TR><TD><CODE> :B=<I>base</I> </CODE>
<TD>Replace the base part of file name with <I>base</I>.
<TR><TD><CODE> :S=<I>suf</I> </CODE>
<TD>Replace the suffix of file name with <I>suf</I>.
<TR><TD><CODE> :M=<I>mem</I> </CODE>
<TD>Replace the archive member name with <I>mem</I>.
<TR><TD><CODE> :R=<I>root</I> </CODE>
<TD>Prepend <I>root</I> to the whole file name, if not
already rooted.
<TR><TD><CODE> :E=<I>value</I> </CODE>
<TD>Use <I>value</I> instead if the variable is unset.
<TR><TD><CODE> :J=<I>joinval</I> </CODE>
<TD>Concatentate list elements into single
element, separated by <I>joinval</I>.
</TABLE>
<P>
On VMS, $(var:P) is the parent directory of $(var:D); on Unix
and NT, $(var:P) and $(var:D) are the same.
<DT> <P> <H3> Built-in Rules </H3> <DD>
<P>
<B>Jam</b> has twelve built-in rules, all of which are pure
procedure rules without updating actions. They are in
three groups: the first builds the dependency graph;
the second modifies it; and the third are just utility
rules.
<P> <H5> Dependency Building </H5>
<P><TABLE WIDTH=75% ALIGN=CENTER><TR><TD><DL>
<P><DT><CODE>
DEPENDS <I>targets1</I> : <I>targets2</I> ;
</CODE>
<DD> Builds a direct dependency: makes each of <I>targets1</I>
depend on each of <I>targets2</I>. Generally, <I>targets1</I>
will be rebuilt if <I>targets2</I> are themselves rebuilt are
or are newer than <I>targets1</I>.
<P><DT><CODE>
INCLUDES <I>targets1</I> : <I>targets2</I> ;
</CODE>
<DD> Builds a sibling dependency: makes any target that depends
on any of <I>targets1</I> also depend on each of <I>targets2</I>.
This reflects the dependencies that arise when one source file
includes another: the object built from the source file depends
both on the original and included source file, but the two
sources files don't depend on each other. For example:
<CODE>
<P>DEPENDS foo.o : foo.c ;
<BR>INCLUDES foo.c : foo.h ;
</CODE>
<P>
"foo.o" depends on "foo.c" and "foo.h" in this example.
</DL></TABLE>
<A NAME="bindingmods">
<P> <H5> Modifying Binding </H5>
</A>
<P>
The six rules ALWAYS, LEAVES, NOCARE, NOTFILE, NOUPDATE, and
TEMPORARY modify the dependency graph so that <b>jam</b> treats
the targets differently during its target binding phase. See
<A HREF="#binding">Binding</A> above. Normally, <b>jam</b>
updates a target if it is missing, if its filesystem modification
time is older than any of its dependencies (recursively), or if
any of its dependencies are being updated. This basic behavior
can be changed by invoking the following rules:
<P><TABLE WIDTH=75% ALIGN=CENTER><TR><TD><DL>
<P><DT><CODE>
ALWAYS <I>targets</I> ;
</CODE>
<DD> Causes <I>targets</I> to be rebuilt regardless of whether
they are up-to-date (they must still be in the dependency graph).
This is used for the clean and uninstall targets, as they have
no dependencies and would otherwise appear never to need building.
It is best applied to targets that are also NOTFILE targets,
but it can also be used to force a real file to be updated as
well.
<P><DT><CODE>
LEAVES <I>targets</I> ;
</CODE>
<DD> Makes each of <I>targets</I> depend only on its leaf sources,
and not on any intermediate targets. This makes it immune to
its dependencies being updated, as the "leaf" dependencies are
those without their own dependencies and without updating actions.
This allows a target to be updated only if original source files
change.
<P><DT><CODE>
NOCARE <I>targets</I> ;
</CODE>
<DD> Causes <b>jam</b> to ignore <I>targets</I> that neither
can be found nor have updating actions to build them. Normally
for such targets <B>jam</B> issues a warning and then skips
other targets that depend on these missing targets. The HdrRule
in Jambase uses NOCARE on the header file names found during
header file scanning, to let <b>jam</b> know that the included
files may not exist. For example, if a #include is within an
#ifdef, the included file may not actually be around.
<P><DT><CODE>
NOTFILE <I>targets</I> ;
</CODE>
<DD> Marks <I>targets</I> as pseudotargets and not real files.
No timestamp is checked, and so the actions on such a target
are only executed if the target's dependencies are updated, or
if the target is also marked with ALWAYS. The default <b>jam</b>
target "all" is a pseudotarget. In Jambase, NOTFILE is used to
define several addition convenient pseudotargets.
<P><DT><CODE>
NOUPDATE <I>targets</I> ;
</CODE>
<DD> Causes the timestamps on <I>targets</I> to be ignored.
This has two effects: first, once the target has been created
it will never be updated; second, manually updating target will
not cause other targets to be updated. In Jambase, for example,
this rule is applied to directories by the MkDir rule, because
MkDir only cares that the target directory exists, not when it
has last been updated.
<P><DT><CODE>
TEMPORARY <I>targets</I> ;
</CODE>
<DD> Marks <I>targets</I> as temporary, allowing them to be
removed after other targets that depend upon them have been
updated. If a TEMPORARY target is missing, <b>jam</b> uses the
timestamp of the target's parent. Jambase uses TEMPORARY to
mark object files that are archived in a library after they are
built, so that they can be deleted after they are archived.
</DL></TABLE>
<P> <H5> Utility Rules </H5>
The remaining rules are utility rules.
<P><TABLE WIDTH=75% ALIGN=CENTER><TR><TD><DL>
<P><DT><CODE>
ECHO <i>args</I> ; <br>
Echo <i>args</I> ; <br>
echo <i>args</I> ;
</CODE>
<DD> Blurts out the message <i>args</I> to stdout.
<P><DT><CODE>
EXIT <i>args</I> ; <br>
Exit <i>args</I> ; <br>
exit <i>args</I> ;
</CODE>
<DD> Blurts out the message <i>args</I> to stdout and then exits
with a failure status.
<P><DT><CODE>
GLOB <i>directories</I> : <I>patterns</I> ;
</CODE>
<DD> Scans <i>directories</i> for files matching <i>patterns</i>,
returning the list of matching files (with directory prepended).
<i>patterns</i> uses the same syntax as in the <b>switch</b>
statement. Only useful within the <tt>[ ]</tt> construct, to
change the result into a list.
<P><DT><CODE>
MATCH <i>regexps</I> : <I>list</I> ;
</CODE>
<DD> Matches the <b>egrep</b>(1) style regular expressions
<I>regexps</I> against the strings in <I>list</I>. The result
is the concatenation of matching <tt>()</tt> subexpressions for
each string in <I>list</I>, and for each regular expression in
<I>regexps</I>. Only useful within the <tt>[ ]</tt> construct,
to change the result into a list.
</DL></TABLE>
<DT> <P> <H3> Built-in Variables </H3> <DD>
<P>
This section discusses variables that have special meaning to
<b>jam</b>.
<A NAME="search">
<P> <H4> SEARCH and LOCATE Variables </H4>
</A>
<P>
These two variables control the binding of file target names to
locations in the file system. Generally, $(SEARCH) is used to
find existing sources while $(LOCATE) is used to fix the location
for built targets.
<P>
Rooted (absolute path) file targets are bound as is. Unrooted
file target names are also normally bound as is, and thus relative
to the current directory, but the settings of $(LOCATE) and
$(SEARCH) alter this:
<P>
<UL>
<LI> If $(LOCATE) is set then the target is bound relative to
the first directory in $(LOCATE). Only the first element is
used for binding.
<LI> If $(SEARCH) is set then the target is bound to the first
directory in $(SEARCH) where the target file already exists.
<LI> If the $(SEARCH) search fails, the target is bound relative
to the current directory anyhow.
</UL>
<P>
Both $(SEARCH) and $(LOCATE) should be set target-specific and
not globally. If they were set globally, <b>jam</b> would use
the same paths for all file binding, which is not likely to
produce sane results. When writing your own rules, especially
ones not built upon those in Jambase, you may need to set
$(SEARCH) or $(LOCATE) directly. Almost all of the rules defined
in Jambase set $(SEARCH) and $(LOCATE) to sensible values for
sources they are looking for and targets they create, respectively.
<A NAME="hdrscan">
<P> <H4> HDRSCAN and HDRRULE Variables </H4>
</A>
<P>
These two variable control header file scanning. $(HDRSCAN) is
an <b>egrep</b>(1) pattern, with ()'s surrounding the file name,
used to find file inclusion statements in source files. Jambase
uses $(HDRPATTERN) as the pattern for $(HDRSCAN). $(HDRRULE)
is the name of a rule to invoke with the results of the scan:
the scanned file is the target, the found files are the sources.
$(HDRRULE) is run under the influence of the scanned file's
target-specific variables.
<P>
Both $(HDRSCAN) and $(HDRRULE) must be set for header file
scanning to take place, and they should be set target-specific
and not globally. If they were set globally, all files, including
executables and libraries, would be scanned for header file
include statements.
<P>
The scanning for header file inclusions is not exact, but it is
at least dynamic, so there is no need to run something like
<b>makedepend</b>(GNU) to create a static dependency file. The
scanning mechanism errs on the side of inclusion (i.e., it is
more likely to return filenames that are not actually used by
the compiler than to miss include files) because it can't tell
if #include lines are inside #ifdefs or other conditional logic.
In Jambase, HdrRule applies the NOCARE rule to each header file
found during scanning so that if the file isn't present yet
doesn't cause the compilation to fail, <b>jam</b> won't care.
<P>
Also, scanning for regular expressions only works where the
included file name is literally in the source file. It can't
handle languages that allow including files using variable names
(as the Jam language itself does).
<P> <H4> Platform Identifier Variables </H4>
<P>
A number of Jam built-in variables can be used to identify
runtime platform:
<P>
<TABLE WIDTH=75% ALIGN=CENTER>
<TR><TD>OS<TD>OS identifier string
<TR><TD>OSPLAT<TD>Underlying architecture, when applicable
<TR><TD>MAC<TD>true on MAC platform
<TR><TD>NT<TD>true on NT platform
<TR><TD>OS2<TD>true on OS2 platform
<TR><TD>UNIX<TD>true on Unix platforms
<TR><TD>VMS<TD>true on VMS platform
</TABLE>
<P> <H4> Jam Version Variables </H4>
<P>
<TABLE WIDTH=75% ALIGN=CENTER>
<TR><TD>JAMDATE<TD>Time and date at <b>jam</b> start-up.
<TR><TD>JAMUNAME<TD>Ouput of <b>uname</b>(1) command (Unix only)
<TR><TD>JAMVERSION<TD><b>jam</b> version, as reported by jam -v.
</TABLE>
<P> <H4> JAMSHELL Variable </H4>
<P>
When <b>jam</b> executes a rule's action block, it forks and
execs a shell, passing the action block as an argument to the
shell. The invocation of the shell can be controlled by
$(JAMSHELL). The default on Unix is, for example:
<P>
<CODE>JAMSHELL = /bin/sh -c % ;</CODE>
<P>
The % is replaced with the text of the action block.
<P>
<B>Jam</b> does not directly support building in parallel across
multiple hosts, since that is heavily dependent on the local
environment. To build in parallel across multiple hosts, you
need to write your own shell that provides access to the multiple
hosts. You then reset $(JAMSHELL) to reference it.
<P>
Just as <b>jam</b> expands a % to be the text of the rule's
action block, it expands a ! to be the multi-process slot number.
The slot number varies between 1 and the number of concurrent
jobs permitted by the -j flag given on the command line. Armed
with this, it is possible to write a multiple host shell. For
example:
<P>
<TABLE WIDTH=75% ALIGN=CENTER><TR><TD><CODE>
<BR>#!/bin/sh
<BR>
<BR># This sample JAMSHELL uses the SunOS on(1) command to execute a
<BR># command string with an identical environment on another host.
<BR>
<BR># Set JAMSHELL = jamshell ! %
<BR>#
<BR># where jamshell is the name of this shell file.
<BR>#
<BR># This version handles up to -j6; after that they get executed
<BR># locally.
<BR>
<BR>case $1 in
<BR>1|4) on winken sh -c "$2";;
<BR>2|5) on blinken sh -c "$2";;
<BR>3|6) on nod sh -c "$2";;
<BR>*) eval "$2";;
<BR>esac
</CODE></TABLE>
<DT> <P> <H2> DIAGNOSTICS </H2> <DD>
<P>
In addition to generic error messages, <B>jam</B> may emit one of
the following:
<P><TABLE WIDTH=75% ALIGN=CENTER><TR><TD><DL>
<P><DT><CODE> warning: unknown rule X </CODE> <DD>
A rule was invoked that has not been defined with
an "actions" or "rule" statement.
<P><DT><CODE> using N temp target(s) </CODE> <DD>
Targets marked as being temporary (but nonetheless
present) have been found.
<P><DT><CODE> updating N target(s) </CODE> <DD>
Targets are out-of-date and will be updated.
<P><DT><CODE> can't find N target(s) </CODE> <DD>
Source files can't be found and there are no
actions to create them.
<P><DT><CODE> can't make N target(s) </CODE> <DD>
Due to sources not being found, other targets cannot be made.
<P><DT><CODE> warning: X depends on itself </CODE> <DD>
A target depends on itself either directly or
through its sources.
<P><DT><CODE> don't know how to make X </CODE> <DD>
A target is not present and no actions have been
defined to create it.
<P><DT><CODE> X skipped for lack of Y </CODE> <DD>
A source failed to build, and thus a target cannot
be built.
<P><DT><CODE> warning: using independent target X </CODE> <DD>
A target that is not a dependency of any other
target is being referenced with $(<) or $(>).
<P><DT><CODE> X removed </CODE> <DD>
<b>Jam</b> removed a partially built target after being
interrupted.
</DL></TABLE>
<DT> <P> <H2> BUGS, LIMITATIONS </H2> <DD>
<P>
The -j flag can cause <B>jam</B> to get confused when single
actions update more than one target at a time. <B>jam</B> may
proceed as if the targets were built even though they are still
under construction.
<P>
For parallel building to be successful, the dependencies among
files must be properly spelled out, as targets tend to get built
in a quickest-first ordering. Also, beware of un-parallelizable
commands that drop fixed-named files into the current directory,
like <b>yacc</b>(1) does.
<P>
With the -j flag, errors from failed commands can get staggeringly
mixed up.
<P>
A poorly set $(JAMSHELL) is likely to result in silent failure.
<DT> <P> <H2> SEE ALSO </H2> <DD>
<P>
<UL>
<LI> <a href="Jambase.html">Jambase Reference</a>
<LI> <a href="Jamfile.html">Using Jamfiles and Jambase</a>
</UL>
<P>
Jam documentation and source are available from the <A
HREF="http://public.perforce.com/public/index.html">Perforce
Public Depot</a>.
<DT> <P> <H2> AUTHOR </H2> <DD>
<P>
Jam's author is Christopher Seiwald (<a
href="mailto:seiwald@perforce.com">seiwald@perforce.com</A>).
Documentation is provided by
<A HREF="http://www.perforce.com">Perforce Software, Inc.</A>
</DL>
<P> <HR>
<P>
Copyright 1993-2002 Christopher Seiwald and Perforce Software, Inc.
<BR>
Comments to <A HREF="mailto:info@perforce.com">info@perforce.com</A>
<BR>
Last updated: May, 2002
<BR>
$Id: //guest/arnt_gulbrandsen/jam/Jam.html#5 $
</BODY>
</HTML>