#!/usr/bin/perl
######################################################################
# #
# Code2HTML #
# --------- #
# #
# Code2Html, version 0.6.4, May 1999, ppalfrad@cosy.sbg.ac.at #
# #
# AUTHOR #
# Peter Palfrader, computer science student at the #
# University of Salzburg/Austria. Written in 1999. #
# #
# DESCRIPTION #
# code2html.pl is a perlscript which converts a program #
# source code to syntax highlighted HTML by applying a set #
# of regular expressions depending on the language #
# the source code is written. #
# #
# LICENSE #
# Copyright (c) 1999 by Peter Palfrader. #
# Not derived from licensed software. #
# #
# Permission is granted to anyone to use this software for #
# any purpose on any computer system, and to redistribute it #
# in any way, subject to the following restrictions: #
# #
# 1. The author is not responsible for the consequences of #
# use of this software, no matter how awful, even if they #
# arise from defects in it. #
# 2. The origin of this software must not be misrepresented, #
# either by explicit claim or by omission. #
# 3. Altered versions must be plainly marked as such, and #
# must not be misrepresented (by explicit claim or #
# omission) as being the original software. #
# 3a. It would be nice if I got a copy of your improved #
# version sent to ppalfrad@cosy.sbg.ac.at. However this #
# is not obligatory. #
# 4. This notice must not be removed or altered. #
# #
# Thanks to Henry Spencer for this wonderful license :). #
# #
# #
# The regular expressions found in the default database are #
# are not subject to this license. They have been taken #
# from NEdit and were then slightly modified by me. #
# #
# According to Mark Edel <edel@ltx.com> who does the support #
# of NEdit they are public domain and so you may do with #
# them whatever you want. #
# #
######################################################################
# #
# HISTORY #
# #
# 0.6.4 - May 1999 #
# * the name attribute in the line numbers was wrong. there should #
# be no # in it. TNX to stifle33@hotmail.com #
# * linking to line numbers now works from the command line too #
# #
# 0.6.3 - May 1999 #
# * fixed C character constant regex. TNX to jesse@lmscadsi.com #
# * line numbers now can link to themselves #
# * line numbers now have a constant width #
# #
# 0.6.2 - May 1999 #
# * fixed something in HTML lang #
# #
# 0.6.1 - May 1999 #
# * added 'plain' language mode #
# * cgi support improoved. should now also handle #
# enctype="multipart/form-data" forms #
# #
# 0.6.0 - May 1999 #
# * fixed Substitution loop at ./code2html.pl (5.2) line 627 #
# * changed string regular expressions: \" is no longer a problem #
# * default locations for the language files have changed: #
# first all the files listed in the enviroment variable #
# CODE2HTML_CONFIG (seperated by colons (:)) will be checked, #
# then, if HOME set, $HOME/.code2html.config and finally #
# /etc/code2html.config #
# * new: --no_header does not print the <html><head>... stuff #
# * new: --content_type prints Content-Type: text/html; #
# * C/C++: in preprocessor lines: strings are highlighted now #
# * -n now also names the lines with <a name="line<nr>">..</a> #
# * script may now be run as a CGI script. see the CGI section #
# in the help #
# * get_config_file was rewritten because it was _ugly_ #
# #
# 0.5.2 - May 1999 #
# * fixed Makefile dependency line bug. (a * in regexp instead a +) #
# #
# 0.5.1 - May 1999 #
# * clarified copyright questions on regular expressions #
# * changed -dumb_default_lang to -dump_default_lang :) #
# #
# 0.5.0 - Apr 1999 #
# * changed find_all_matches__create_taglist__insert_placeholders #
# so that it works around a bug in earlier perl versions, in which #
# pos() is not set if the return value of m//g is not used. #
# * changed a regex in get_config_file #
# #
# 0.4.1 - Mar 1999 #
# * changed JavaScript regexps slightly #
# * changed find_all_matches_.. slightly #
# #
# 0.4.0 - Mar 1999 #
# * script no longer needs $' and $` thus beeing faster. $& is still #
# needed #
# * regexps for perl changed slightly #
# * find_all_matches has been completly rewritten. verify is no #
# longer needed. taglist is built while searching. #
# May take a bit longer now, but otherwhise a bug could not have #
# been fixed. #
# * changed (fixed?) start of language_def_block pos evaluation #
# #
# 0.3.3 - Feb 1999 #
# * fixed STDIN/STDOUT parameters when passed a - the scrpit though #
# options would follow and didn't tread this as a handle for STDIN #
# * added -V as shortcut to --version #
# #
# 0.3.2 - Feb 1999 #
# * removed -T from 1st line so activePerl will run the script #
# without any modifications #
# * changed perl string regexps. run now faster and better #
# (and run at all under win) #
# * added --replace_tabs #
# #
# 0.3.1 - Feb 1999 #
# * fixed language files bug (<space>lang_mode<space> no longer #
# starts langmode) #
# * fixed empty html tag bug when reading lang specs #
# * added languages: Makefile, Java, JavaScript, Perl #
# * added --modes #
# #
# 0.3.0 - Feb 1999 #
# * added linenumbers #
# * added <head> and <title> tag in html output #
# * fixed crlf switch works now #
# #
# 0.2.0 - Feb 1999 #
# * first official release #
# #
######################################################################
use strict;
#$\ = "\n";
$/ = "\n";
my $FILES_DISALLOWED_IN_CGI = 0;
# you may set this to true to disallow file reading from your hd in
# cgi mode. This may be good if your httpd runs as 'root' (yes, I've
# seen this!) and so any user could with some knowledge easily read
# your /etc/shadow for example!
&main;
sub main {
my $vernr = "0.6.4";
my $monthshort = "May";
my $monthlong = "May";
my $pure_version_message = "\nCode2Html, version $vernr, $monthshort 1999, ppalfrad\@cosy.sbg.ac.at\n\n";
my $version_message = "\n$pure_version_message\n\n";
my $help_message = "
$pure_version_message
NAME
code2html.pl - Converts a program source code to HTML
SYNOPSIS
code2html.pl [options] language_mode [input_file
[output_file]]
code2html.pl (as a CGI script: see CGI section below)
DESCRIPTION
code2html.pl is a perlscript which converts a program
source code to syntax highlighted HTML by applying a set
of regular expressions depending on the language
the source code is written.
EXAMPLE USAGE
assuming code2html.pl is in the current directory, you may
type
code2html.pl perl code2html.pl code2html.html
to convert the script into a html file.
OPTIONS
language_mode
Specify the set of regular expressions to use.
These have to be defined in a langugage file
(see FILES below). To find out which language modes
are defined, issue a code2html.pl --modes.
This input is treated case-insensitive.
input_file
Is the file which contains the program source code
to be formatted. If not specified or a minus (-) is
given, the code will be read from STDIN.
output_file
Is the file ro write the formatted code to. If not
specified or a minus (-) is given, the code will be
written to STDOUT.
-v, --verbose
Prints progress information to STDERR. You will not
need this.
-r, --crlf
Usually the program output is print with a newline
(\\n) only as a line delimiter. However if you want
to use carrige return/line feed (\\r\\n or crlf) as a
line delimiter, so be it.
-n, --linenumbers
Print out the source code with line numbers.
-N, --linknumbers
Print out the source code with line numbers.
The linenumbers will link to themselves, which
makes it easy to send links to lines.
-t, --replace_tabs [SPACE_COUNT]
Replace each occurence of a <TAB> character with
spaces. The default number of spaces is 4 but this
can be changed by an optional argument.
-l, --language_file FILE
Specify an alternate languages file to take the
regular expressions from (see FILES below).
-m, --modes
Print all defined modes currently defined to STDOUT
and exit succesfully. Also prints modes from a
given language_file if applicable.
--dump_default_lang
Write default language file to STDOUT and exit
succesfully.
-h, -? --help
Print this text and exit succesfully.
-V --version
Print the program version and exit succesfully.
-c --content_type
Prints \"Content-Type: text/html\\n\\n\" prior to the
html file. Usefull if the script is ivoked as a
cgi script.
-H --no_header
do not print the <html>, <head>, <body> stuff. Use-
full if this script is only a part in a bigger
program.
CGI
CGI is in early beta!
If the the script is used as a CGI script
(GATEWAY_INTERFACE envoriment set) code2html ignores all
command line parameters and reads them either from the
query string or from stdin. (methods POST and GET).
--content_type is switched on automatically and the output
always goes to STDOUT.
The following parameters/options are accepted:
language_mode - required
'c', 'cc', 'pas', etc.
input_selector - optional
either 'file', 'cgi_input1', or 'cgi_input2'
default: file
filename
file to read from if input_selector is 'file'
cgi_input1
the source code to syntax highlight
see input_selector
cgi_input2
the source code to syntax highlight
see input_selector
line_numbers - optional
'yes', 'no' or 'link'
default: no
replace_tabs - optional
if -1 then tabs are not replaced, if larger then each
tab is replaced by that many spaces.
default: -1
Why two cgi_inputs you may ask: This is to allow your
users to choose vie a <form> interface whether they want
to insert their file into a <textarea> or user a <browse>
button to select their file. See the example on my home-
page.
Note that by default it is possbile for your users to read
all the files the httpd can read (if you don't run a cgi-
wrapper or something like this . You may disallow file
reading via cgi with setting FILES_DISALLOWED_IN_CGI to 1
at the top of the script.
BUGS
If the input file contains all 256 possible characters
then all character values of 255 will be changed to values
of 254. I don't think this is a problem and so I will not
try to find a other way to code this stuff. If however
this is a problem for you, let me know and I will rethink
my strategy.
Please report bugs to ppalfrad\@cosy.sbg.ac.at. This
program is still in beta so you might find some. Also have
a look at my web-site, perhaps a new version is available
already: http://www.cosy.sbg.ac.at/~ppalfrad/
FILES
file specified by -l or --language_file if any
files specified in \$CODE2HTML_CONFIG, seperated by colons
\$HOME/.code2html.config
/etc/code2html.config
built in default languages
These databases will be searched in that order for the set
of regular expressions specified by the language_mode
parameter. The first set of regular expression which is
found will be taken.
The files must have the following structure:
Empty lines are ignored.
Every line beginning with a pound sign (#) is a comment.
Note that a line actually must start with this character
(apart from tabs and spaces) in order to be a comment.
A language starts with the name of it's section in
brackets. Aliases may be defined withing the same brackets
seperated by a comma (,).
Examples: [c]
[c++,cpp,cc]
Then the default background and text colours may be set.
If not defined they default to #ffffff (white) for the
background and #000000 (black) for the text.
bgcolor=#ffffff
textcolor=#000000
Spaces and Tabs before and after the equals-sign (=) are
allowed. The first non whitespace after the = sign until
the end of line will then be copied to the bgcolor and
the text options in the HTMLs body tag.
As a third step the regular expressions must be defined:
A line defining this consist of three parts:
The html tag to insert at the start of the pattern's
occurance, one to insert at the end and the pattern
itself. All three parts must be enclosed in double
quotes(\") and are seperated by commas (,). If one of
those parts contains a double quote, this must be escaped
with a backshlash (\\).
Example:
\"<i>\", \"</i>\", \"\\\".*?\\\"\"
This line prints all strings enclosed by double
quotes italic.
If a line starts with a minus (-) then this pattern is
applied to the matched part of the previos line that had
no minus in front. So you can highlight for example escape
characters in strings.
- \"<strong>\", \"</strong>\", \"\\\\.\"
If you ever write languages files yourself, I'ld be happy
if you could send be them, so I put them on my homepage
with full credits of course.
Before you do so you might also have a look at my site to
check wheter someone has written the file for your
language already.
web-site: http://www.cosy.sbg.ac.at/~ppalfrad/
AUTHOR
Peter Palfrader, computer science student at the
University of Salzburg/Austria. Written in $monthlong 1999.
LICENSE
Copyright (c) 1999 by Peter Palfrader.
Not derived from licensed software.
Permission is granted to anyone to use this software for
any purpose on any computer system, and to redistribute it
in any way, subject to the following restrictions:
1. The author is not responsible for the consequences of
use of this software, no matter how awful, even if they
arise from defects in it.
2. The origin of this software must not be misrepresented,
either by explicit claim or by omission.
3. Altered versions must be plainly marked as such, and
must not be misrepresented (by explicit claim or
omission) as being the original software.
3a. It would be nice if I got a copy of your improved
version sent to ppalfrad\@cosy.sbg.ac.at. However this
is not obligatory.
4. This notice must not be removed or altered.
Thanks to Henry Spencer for this wonderful license :).
The regular expressions found in the default database are
are not subject to this license. They have been taken
from NEdit and were then slightly modified by me.
According to Mark Edel <edel\@ltx.com> who does the support
of NEdit they are public domain and so you may do with
them whatever you want.
";
my $short_help = "
$pure_version_message
NAME
code2html.pl - Converts a program source code to HTML
SYNOPSIS
code2html.pl language_mode [input_file [output_file]]
[options]
DESCRIPTION
code2html.pl is a perlscript which converts a program
source code to syntax highlighted HTML by applying a set
of regular expressions depending on the language
the source code is written.
";
my @config_files;
if ($ENV{'CODE2HTML_CONFIG'})
{
@config_files = split(/:/,$ENV{'CODE2HTML_CONFIG'});
};
if ($ENV{'HOME'})
{
push @config_files, $ENV{'HOME'}."/.code2html.config";
};
push @config_files, "/etc/code2html.config";
my $langmode = ""; # language mode
my $verbose = 0;
my $infile = "";
my $outfile = "";
my $language_file = "";
my $crlf = 0;
my $linenumbers = 0;
my $linknumbers = 0;
my $modes = 0;
my $tabs = -1;
my $no_header = 0;
my $content_type = 0;
my $cgiinput = 0;
my $usecgi = 0;
&parse_params($verbose, $langmode, $infile, $outfile, $language_file, $crlf, $linenumbers, $linknumbers, $modes, $tabs, $no_header, $content_type, $cgiinput, $usecgi, $help_message, $version_message, $short_help);
my $hidechar = ""; # a character that must not exist in the code and which is used as a placeholder
# will be set in $code;
my $bgcolor = "#ffffff"; #default value only. will be set in parse_config_part
my $textcolor = "#000000"; #default value only. will be set in parse_config_part
print STDERR "parsing config file...\n" if ($verbose);
my @regexps = &parse_config_part(&get_config_file(\@config_files, $langmode, $language_file, $modes, $usecgi), $bgcolor, $textcolor);print STDERR "loading input file...\n" if ($verbose);
my $code = &get_input_file($hidechar, $infile, $tabs, $usecgi, $cgiinput); print STDERR "finding all matches, inserting placeholders, creating taglist...\n" if ($verbose);
my @taglist = &find_all_matches__create_taglist__insert_placeholders(\@regexps, $code, $hidechar); print STDERR "converting source code to HTML...\n" if ($verbose);
$code = &convert_code_2_html($code); print STDERR "replacing placeholders with appropriate HTML tags...\n" if ($verbose);
$code = &insert_tags(\@taglist, $code, $hidechar); print STDERR "outputting file...\n" if ($verbose);
&put_output($code, $bgcolor, $textcolor, $outfile, $crlf, (($infile eq "-")?"STDIN":$infile), $linenumbers, $linknumbers, $no_header, $content_type);
}
sub fatalerror
{
if ($_[1])
{
print "content-type: text/plain\n\n$_[0]\n";
exit;
}
else
{
print STDERR $_[0];
exit 1;
};
};
sub get_input_data
{
#in : none
my $input_data;
my %f;
if($ENV{'REQUEST_METHOD'} eq 'GET')
{
$input_data = $ENV{'QUERY_STRING'}
}
else
{
read(STDIN, $input_data, $ENV{'CONTENT_LENGTH'});
};
if ($ENV{'CONTENT_TYPE'} =~ m/^multipart\/form-data; boundary=(.*)$/i)
{
my $boundary = quotemeta($1);
my @blocks = split(/$boundary/, $input_data);
for (@blocks)
{
if (my $dummy = m/name="(.*?)"/i)
{
my $name = $1;
$_ =~ s/\r\n/\n/g;
m/\n\n(.*)\n/s;
my $value = $1;
$f{$name}=$value;
};
};
}
else
{
my @form_fields = split(/&/, $input_data);
for (@form_fields)
{
my ($name, $value) = split(/=/, $_);
$value =~ tr/+/ /;
$value =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg;
$f{$name} = $value;
}
};
return %f;
};
################################################################################
####################### parse_params ###########################################
################################################################################
sub parse_params
{
# 0 out : verbose
# 1 out : $langmode
# 2 out : $infile
# 3 out : $outfile
# 4 out : $language_file
# 5 out : $crlf
# 6 out : $linenumbers
# 7 out : linknumbers
# 8 out : $modes
# 9 out : $tabs
# 10 out : $no_header
# 11 out : $content_type
# 12 out : $cgiinput
# 13 out : $usecgi
# 14 in : $help_message
# 15 in : $version_message
# 16 in : $short_help
my $verbose = 0;
my $langmode = "";
my $infile = "-";
my $outfile = "-";
my $language_file = "";
my $crlf = 0;
my $linenumbers = 0;
my $linknumbers = 0;
my $modes = 0;
my $tabs = -1;
my $no_header = 0;
my $content_type = 0;
my $cgiinput = "";
my $usecgi = 0;
my $help_message = $_[14];
my $version_message = $_[15];
my $short_help = $_[16];
my $this_one_is_the_language_file = 0;
my $tab_value_may_follow = 0;
my $paramcount = 0;
my $wrong_parameters = 0;
if (defined($ENV{'GATEWAY_INTERFACE'}))
{
$usecgi = 1;
$content_type = 1;
my %input = &get_input_data;
if (!defined($input{'language_mode'})) {&fatalerror('CGI parse error: language mode not given!', 1)};
$langmode = $input{'language_mode'};
if ($input{'input_selector'} eq "cgi_input1")
{
$infile = "-";
if (!defined($input{'cgi_input1'})) {&fatalerror('CGI parse error: cgi_input1 does not exist!', 1)};
$cgiinput = $input{'cgi_input1'};
}
elsif ($input{'input_selector'} eq "cgi_input2")
{
$infile = "-";
if (!defined($input{'cgi_input2'})) {&fatalerror('CGI parse error: cgi_input2 does not exist!', 1)};
$cgiinput = $input{'cgi_input2'};
}
elsif ($input{'input_selector'} eq "file")
{
if ($FILES_DISALLOWED_IN_CGI) {&fatalerror('CGI parse error: option not supported due to security reasons!', 1)};
if (!defined($input{'filename'})) {&fatalerror('CGI parse error: filename does not exist!', 1)};
$infile = $input{'filename'};
}
else
{
&fatalerror('CGI parse error: input selector not given!, 1');
};
if ($input{'line_numbers'} eq "yes") { $linenumbers = 1 };
if ($input{'line_numbers'} eq "link") { $linknumbers = 1 };
if (defined($input{'replace_tabs'})) { $tabs = $input{'replace_tabs'} };
}
else
{
for (@ARGV)
{
if ($this_one_is_the_language_file)
{
$language_file = $_;
$this_one_is_the_language_file = 0;
}
elsif (($tab_value_may_follow)&&(!($_ =~ /[^\d]/)))
{
$tabs = $_;
}
else
{
if ((length($_) > 1) && (substr($_, 0, 1) eq "-")) {
if (substr($_, 1, 1) eq "-") {
if ($_ eq "--verbose") { $verbose = 1 }
elsif ($_ eq "--crlf") { $crlf = 1 }
elsif ($_ eq "--linenumbers") { $linenumbers = 1 }
elsif ($_ eq "--linknumbers") { $linknumbers = 1 }
elsif ($_ eq "--modes") { $modes = 1; }
elsif ($_ eq "--no_header") { $no_header = 1; }
elsif ($_ eq "--content_type") { $content_type = 1; }
elsif ($_ eq "--help") { print $help_message; exit 0 }
elsif ($_ eq "--version") { print $version_message; exit 0 }
elsif ($_ eq "--dump_default_lang") { print &get_default_database; exit 0 }
elsif ($_ eq "--language_file") { $this_one_is_the_language_file = 1; }
elsif ($_ eq "--replace_tabs") { $tabs = 4; $tab_value_may_follow = 1}
else {$wrong_parameters = 1;}
}
else
{
$modes += s/m//g;
$verbose += s/v//g;
$crlf += s/r//g;
$content_type += s/c//g;
$no_header += s/H//g;
$linenumbers += s/n//g;
$linknumbers += s/N//g;
if (s/h//g + s/\?//g) { print $help_message; exit 0 };
if (s/V//g + s/\?//g) { print $version_message; exit 0 };
if (s/l//) { $this_one_is_the_language_file = 1};
if (s/t//) { $tabs = 4; $tab_value_may_follow = 1};
if ($_ ne "-") {$wrong_parameters = 1;}
}
}
else
{
if ($paramcount == 2) {$paramcount++; $_ =~ /(^.*$)/; $outfile = $1;} # I hate taint mode
elsif ($paramcount == 1) {$paramcount++; $infile = $_}
elsif ($paramcount == 0) {$paramcount++; $langmode = $_}
else
{
print STDERR "\nToo many parameters.\n\n";
print STDERR $short_help;
print STDERR "\n\nrun code2html --help for furhter help\n";
exit 1;
}
}
}}
if ((($this_one_is_the_language_file) || ($langmode eq "")) && (!$modes) || $wrong_parameters)
{
print STDERR "\nwrong parameters.\n\n";
print STDERR $short_help;
print STDERR "\n\nrun code2html --help for furhter help\n";
exit 1;
}
};
if ($linknumbers) {$linenumbers=1};
$_[0] = $verbose;
$_[1] = $langmode;
$_[2] = $infile;
$_[3] = $outfile;
$_[4] = $language_file;
$_[5] = $crlf;
$_[6] = $linenumbers;
$_[7] = $linknumbers;
$_[8] = $modes;
$_[9] = $tabs;
$_[10] = $no_header;
$_[11] = $content_type;
$_[12] = $cgiinput;
$_[13] = $usecgi;
};
################################################################################
####################### get_config_lines #######################################
################################################################################
sub get_config_lines
{
#in : $modes
#in : \@lines
#in : metaquoted $langmode
#returns config file as string
my ($modes, $linesptr, $lm) = @_;
my @lines = @$linesptr;
my $result = "";
if ($modes)
{
for (@lines)
{
$_ =~ s/\n|\r//g;
$_ =~ s/^[ \t]*(.*)[ \t]*/$1/; #remove beginning and trailing spaces / tabs
if (substr($_,0,1) eq "[")
{
print " ".$_."\n";
}
}
} else {
my $waiting = 1;
for (@lines)
{
if ($waiting)
{
$_ =~ s/\n|\r//g;
$_ =~ s/^[ \t]*(.*)[ \t]*/$1/; #remove beginning and trailing spaces / tabs
if ($_ =~ m/^\[(.*?[, ])?$lm([, ].*?)?\]/i)
{$waiting = 0;};
}
else
{
$_ =~ s/\n|\r//g;
$_ =~ s/^[ \t]*(.*)[ \t]*/$1/; #remove beginning and trailing spaces / tabs
last if (substr($_,0,1) eq "["); #new language mode
if (($_ ne "")&&(substr($_, 0, 1) ne "#"))
{
$_ =~ /^.*$/; # untaint input
$result .= $&."\n";
}
}
};
};
return $result;
};
################################################################################
####################### get_one_config_file ####################################
################################################################################
sub get_one_config_file
{
#in: filename
#in: langmode already meta quoted.
#in: modes;
#returns config file as string
if (!open FILEHANDLE, "<$_[0]") {return ""};
my @lines = <FILEHANDLE>;
my $result = get_config_lines($_[2], \@lines, $_[1]);
close FILEHANDLE;
return $result;
};
################################################################################
####################### get_config_file ########################################
################################################################################
sub get_config_file
{
#in : @config_files
#in : $langmode;
#in : $language_file;
#in : $modes;
#in : $incgi
#returns config file as string
#Apply language mode
my $result = "";
my $lm = quotemeta($_[1]);
my $langfile = $_[2];
my $modes = $_[3];
my $incgi = $_[4];
if ($modes)
{
print "\n\nDefined language modes:\n";
print "-----------------------\n";
print "(You may use any of the names seperated\n";
print "by commas to refer to a certain mode.)\n\n";
};
if ($langfile ne "")
{
if ($modes)
{
print "in specified langfile:\n";
};
$result = &get_one_config_file($langfile, $lm, $modes);
};
if ($result eq "")
{
for (@{$_[0]})
{
if ($modes)
{
print "in file $_:\n";
};
$result = &get_one_config_file($_, $lm, $modes);
if ($result ne "") {last;};
};
};
if ($result eq "")
{
if ($modes)
{
print "in default database:\n";
};
my @lines = split(/\n/,&get_default_database);
$result = &get_config_lines($modes, \@lines, $lm);
}
if ($modes)
{
print "-----------------------\n";
print "That's it\n\n\n";
exit;
};
if ($result eq "")
{
fatalerror("Given language mode '$_[1]' was not found in config files.\n", $incgi);
}
return $result;
}
################################################################################
####################### parse_config_part ######################################
################################################################################
sub parse_config_part
{
#in: string: config data
#in: string: bgcolor
#in: string: textcolor
#returns @regexps
my @regexps = ();
while ($_[0] =~ /(^[^\-].*?$)/gms)
{
my $us = $1;
my $after = substr($_[0], pos($_[0]));
if ($us =~ /^"/) #"# xemacs :)
{
my %t = ();
my $tmp = "";
my @child = ();
$us =~ s/([ \t]*("([^"]|\\")*")[ \t]*,)//m; $tmp = $1; $tmp =~ m/("(.*[^\\])?")/; $tmp = $1; $tmp =~ s/"(.*)"/$1/g; $tmp =~ s/\\"/"/g; $t{"html1"} = $tmp;
$us =~ s/([ \t]*("([^"]|\\")*")[ \t]*,)//m; $tmp = $1; $tmp =~ m/("(.*[^\\])?")/; $tmp = $1; $tmp =~ s/"(.*)"/$1/g; $tmp =~ s/\\"/"/g; $t{"html2"} = $tmp;
$us =~ s/([ \t]*("([^"]|\\")*")[ \t]*$)//m; $tmp = $1; $tmp =~ m/("(.*[^\\])?")/; $tmp = $1; $tmp =~ s/"(.*)"/$1/g; $tmp =~ s/\\"/"/g; $t{"regex"} = $tmp;
if ($after =~ /(^\n\-.*?($|\n[^\-]))/s)
{
$tmp = $1;
$tmp =~ s/^\n//;
$tmp =~ s/\n.$//;
$tmp =~ s/^-[ \t]*//mg;
@child = &parse_config_part($tmp."\n");
};
$t{"childregex"} = \@child;
push @regexps, \%t;
}
else
{
if ($us =~ s/^bgcolor[ \t]*=[ \t]*//i)
{
$_[1] = $us;
}
elsif ($us =~ s/^textcolor[ \t]*=[ \t]*//i)
{
$_[2] = $us;
}
};
};
return @regexps;
};
################################################################################
####################### get_input_file #########################################
################################################################################
sub get_input_file
{
# out: hidechar
# in : infile;
# in : tabs;
# in : use_cgi;
# in : cgiinput
#returns input file
my $code = "";
my $infile = $_[1];
my $tabs = $_[2];
my $usecgi = $_[3];
my $cgiinput = $_[4];
$_[0] = "";
if ($infile eq "-")
{
if ($usecgi){ $code = $cgiinput; $code =~ s/\r//g;}
else{ while (<STDIN>) { $_ =~ s/\n|\r//g; $code = $code.$_."\n"; };}
}
else
{
if (!open(FILEHANDLE, "<$infile"))
{
&fatalerror("Error while opening inputfile.\n", $usecgi);
};
while (<FILEHANDLE>) { $_ =~ s/\n|\r//g; $code = $code.$_."\n"; };
close(FILEHANDLE);
}
if ($tabs != -1)
{
my $replacewith = "";
for (1..$tabs) # create a string with the correct length
{
$replacewith .= " ";
};
$code =~ s/\t/$replacewith/g;
};
#find a character that does not exist in $code
foreach $a (0..255) {
my $n = quotemeta(chr($a));
if (!($code =~ s/$n/$n/g))
{
$_[0] = chr($a);
last;
};
};
if ($_[0] eq "") # if no character - which does not exist in $code - was found then be brute
{
$code =~ s/\xff/\xfe/g;
$_[0] = "\xff";
}
return $code;
};
################################################################################
####################### find_all_matches__create_taglist__insert_placeholders ##
################################################################################
sub find_all_matches__create_taglist__insert_placeholders
{
# in: regexps
# in/out: code
# in : hidechar
# returns: @taglist;
my @regexps = @{$_[0]};
my @taglist;
if (!@regexps) {return @taglist}; #if there are no regexps, then there are not hits.
my $code = $_[1];
my $hidechar= $_[2];
my $over_length = length($code)+1;
my $index=0;
my @regexps_occurence;
for (@regexps)
{
my %t;
$t{"index"} = $index;
$t{"regex"} = $$_{"regex"};
$t{"html1"} = $$_{"html1"};
$t{"html2"} = $$_{"html2"};
pos($code) = 0;
if ($code =~ /$t{"regex"}/gms) { $t{"first_occurence"} = pos($code) - length($&) }
else { $t{"first_occurence"} = $over_length; };
push @regexps_occurence, \%t;
$index++;
};
@regexps_occurence = sort {
$$a{"first_occurence"} <=> $$b{"first_occurence"} ||
$$a{"index"} <=> $$b{"index"}
} @regexps_occurence;
while (${$regexps_occurence[0]}{"first_occurence"} < $over_length)
{
my %t;
pos($code) = ${$regexps_occurence[0]}{"first_occurence"} + scalar(@taglist);
my $dummy = $code =~ /${$regexps_occurence[0]}{"regex"}/gms;
my $match = $&;
my $matchend = pos($code);
my $matchlength = length($match);
my $delta_offset = 0;
push @taglist, ${$regexps_occurence[0]}{"html1"}; #push beginning html tag
my @m = @{ ${ %{$regexps[${$regexps_occurence[0]}{"index"}]} }{"childregex"} };
if (@m)
{
my @newtaglist = &find_all_matches__create_taglist__insert_placeholders(
\@m,
$match,
$hidechar);
$delta_offset = scalar(@newtaglist);
push @taglist, @newtaglist;
};
$code = substr($code, 0, $matchend-$matchlength) .
$hidechar .
$match .
$hidechar .
substr($code, $matchend);
push @taglist, ${$regexps_occurence[0]}{"html2"}; #push ending html tag
for (@regexps_occurence)
{
if (${$_}{"first_occurence"} < $matchend+2+$delta_offset - scalar(@taglist))
{
pos($code) = $matchend+2+$delta_offset;
if ($code =~ /${$_}{"regex"}/gms) { ${$_}{"first_occurence"} = pos($code) - length($&) - scalar(@taglist); }
else { ${$_}{"first_occurence"} = $over_length; };
} else {
last;
}
}
@regexps_occurence = sort {
$$a{"first_occurence"} <=> $$b{"first_occurence"} ||
$$a{"index"} <=> $$b{"index"}
} @regexps_occurence;
};
$_[1] = $code;
return @taglist;
};
################################################################################
####################### convert_code_2_html ####################################
################################################################################
sub convert_code_2_html
{
# in: code
# returns: code
my $code = $_[0];
$code =~ s/&/&/g;
$code =~ s/>/>/g;
$code =~ s/</</g;
$code =~ s/"/"/g; # "# just because xemacs syntax highlighting messes things up
return $code;
};
################################################################################
####################### insert_tags ############################################
################################################################################
sub insert_tags
{
# in: taglist
# in: code
# in: hidechar
# returns: code
my @taglist = @{$_[0]};
my $tmp = $_[1];
my $hidechar = $_[2];
my $newcode = "";
for (@taglist) # go for all tags
{
# This goes must faster than
# $code =~ s/$hidechar/$_/;
$tmp =~ m/(^.*?)$hidechar(.*)/s;
$newcode .= $1.$_;
$tmp = $2;
};
return $newcode.$tmp;
};
################################################################################
####################### put_output #############################################
################################################################################
sub prettyprint
{
# don't ask me what happens if $nr does not fit into $lengthofnr chars!
my ($nr, $lengthofnr) = @_;
my $result = " " x $lengthofnr;
substr($result, -length($nr)) = $nr;
return $result;
}
sub put_output
{
#0 in: code
#1 in: bgcolor
#2 in: textcolor
#3 in: outfile;
#4 in: crlf
#5 in: name_of_input
#6 in: linenumbers
#7 in: linknumers
#8 in: no_header
#9 in: content_type
my ($code, $bgcolor, $textcolor, $outfile, $crlf, $name_of_input, $linenumbers, $linknumbers, $no_header, $content_type) = @_;
if ($crlf) { $code =~ s/\n/\r\n/g; };
if (!open (FILEHANDLE, ">$outfile" )) {
print STDERR "Error while opening outputfile.\n";
exit 1;
};
if ($content_type) {print FILEHANDLE "Content-Type: text/html;\n\n";};
if (!($no_header)) {print FILEHANDLE "<html><head><title>$name_of_input</title></head><body bgcolor=\"$bgcolor\" text=\"$textcolor\"><pre>\n";};
if ($linenumbers)
{
my @lines = split(/\n/,$code);
my $nr = 1;
my $nr_of_lines = scalar(@lines);
my $lengthofnr = 0;
while ($nr_of_lines>1)
{
$lengthofnr++;
$nr_of_lines = $nr_of_lines / 10;
};
for (@lines)
{
if ($linknumbers)
{
print FILEHANDLE "<a name=\"line$nr\" href=\"#line$nr\">".&prettyprint($nr, $lengthofnr)."</a> ".$_."\n";
}
else
{
print FILEHANDLE "<a name=\"line$nr\">".&prettyprint($nr, $lengthofnr)."</a> ".$_."\n";
};
$nr++;
}
}
else
{
print FILEHANDLE $_[0];
};
if (!($no_header)) {print FILEHANDLE "</pre></body></html>\n";};
close (FILEHANDLE);
};
################################################################################
####################### get_default_database ###################################
################################################################################
sub get_default_database
{
# last evaluated value will be returned
my $tmp = <<EODB
######################################################################
################################# Plain ##############################
######################################################################
[plain]
bgcolor=#ffffff
textcolor=#000000
######################################################################
################################# Ada 95 #############################
######################################################################
[ada,ada95]
bgcolor=#ffffff
textcolor=#000000
#Comments
"<font color=\\"#444444\\">", "</font>", "--.*?\$"
#String Literals
"<font color=\\"#008000\\">", "</font>", "\\".*?(\\"|\$)"
#Character Literals
"<font color=\\"#008000\\">", "</font>", "'.'"
#Ada Attibutes
"<strong>", "</strong>", "'[a-zA-Z][a-zA-Z_]+\\b"
#Numeric Literals
"<font color=\\"#FF0000\\">", "</font>", "(((2|8|10|16)#[_0-9a-fA-F]*#)|[0-9.]+)"
#Withs Pragmas Use
"<font color=\\"#0000FF\\"><strong>", "</strong></font>", "\\b(([wW]ith|WITH|[pP]ragma|PRAGMA|[uU]se|USE)[ \\t\\n\\f\\r]+[a-zA-Z0-9_.]+;)+\\b"
#Predefined Types
"<font color=\\"#800000\\"><strong>", "</strong></font>", "\\b([bB]oolean|BOOLEAN|[cC]haracter|CHARACTER|[cC]ount|COUNT|[dD]uration|DURATION|[fF]loat|FLOAT|[iI]nteger|INTEGER|[lL]ong_[fF]loat|LONG_FLOAT|[lL]ong_[iI]nteger|LONG_INTEGER|[pP]riority|PRIORITY|[sS]hort_[fF]loat|SHORT_FLOAT|[sS]hort_[iI]nteger|SHORT_INTEGER|[sS]tring|STRING)\\b"
#Predefined Subtypes
"<font color=\\"#800000\\"><strong>", "</strong></font>", "\\b([fF]ield|FIELD|[nN]atural|NATURAL|[nN]umber_[bB]ase|NUMBER_BASE|[pP]ositive|POSITIVE|[pP]riority|PRIORITY)\\b"
#Reserved Words
"<strong>", "</strong>", "\\b([aA]bort|ABORT|[aA]bs|ABS|[aA]ccept|ACCEPT|[aA]ccess|ACCESS|[aA]nd|AND|[aA]rray|ARRAY|[aA][tT]|[bB]egin|BEGIN|[bB]ody|BODY|[cC]ase|CASE|[cC]onstant|CONSTANT|[dD]eclare|DECLARE|[dD]elay|DELAY|[dD]elta|DELTA|[dD]igits|DIGITS|[dD][oO]|[eE]lse|ELSE|[eE]lsif|ELSIF|[eE]nd|END|[eE]ntry|ENTRY|[eE]xception|EXCEPTION|[eE]xit|EXIT|[fF]or|FOR|[fF]unction|FUNCTION|[gG]eneric|GENERIC|[gG]oto|GOTO|[iI][fF]|[iI][nN]|[iI][sS]|[lL]imited|LIMITED|[lL]oop|LOOP|[mM]od|MOD|[nN]ew|NEW|[nN]ot|NOT|[nN]ull|NULL|[oO][fF]|[oO][rR]|[oO]thers|OTHERS|[oO]ut|OUT|[pP]ackage|PACKAGE|[pP]ragma|PRAGMA|[pP]rivate|PRIVATE|[pP]rocedure|PROCEDURE|[rR]aise|RAISE|[rR]ange|RANGE|[rR]ecord|RECORD|[rR]em|REM|[rR]enames|RENAMES|[rR]eturn|RETURN|[rR]everse|REVERSE|[sS]elect|SELECT|[sS]eparate|SEPARATE|[sS]ubtype|SUBTYPE|[tT]ask|TASK|[tT]erminate|TERMINATE|[tT]hen|THEN|[tT]ype|TYPE|[uU]se|USE|[wW]hen|WHEN|[wW]hile|WHILE|[wW]ith|WITH|[xX]or|XOR)\\b"
#Ada 95 Only
"<strong>", "</strong>", "\\b([aA]bstract|ABSTRACT|[tT]agged|TAGGED|[aA]ll|ALL|[pP]rotected|PROTECTED|[aA]liased|ALIASED|[rR]equeue|REQUEUE|[uU]ntil|UNTIL)\\b"
#Identifiers
"<font color=\\"#800000\\">", "</font>", "\\b[a-zA-Z][a-zA-Z0-9_]*\\b"
#Dot All
"<font color=\\"#800000\\"><strong>", "</strong></font>", "\\.[aA][lL][lL]\\b"
######################################################################
################################# C ##################################
######################################################################
[c]
bgcolor=#ffffff
textcolor=#000000
#comment
"<font color=\\"#444444\\">", "</font>", "/\\*.*?\\*/"
#string
"<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#preprocessor line
"<font color=\\"#0000FF\\">", "</font>", "^[ \\t]*#.*?\$"
#string
- "<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
-- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#<files>
- "<font color=\\"#008000\\">", "</font>", "<.*?>"
#comment
- "<font color=\\"#444444\\">", "</font>", "[^/]/\\*.*?\\*/"
#character constant
"<font color=\\"#008000\\">", "</font>", "'(\\\\)?.'"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#numeric constant
"<font color=\\"#FF0000\\">", "</font>", "\\b((0(x|X)[0-9a-fA-F]*)|(([0-9]+\\.?[0-9]*)|(\\.[0-9]+))((e|E)(\\+|-)?[0-9]+)?)(L|l|UL|ul|u|U|F|f)?\\b"
#storage keyword
"<strong>", "</strong>", "\\b(const|extern|auto|register|static|unsigned|signed|volatile|char|double|float|int|long|short|void|typedef|struct|union|enum)\\b"
#keyword
"<strong>", "</strong>", "\\b(return|goto|if|else|case|default|switch|break|continue|while|do|for|sizeof)\\b"
#braces
"<font color=\\"#4444FF\\"><strong>", "</strong></font>", "[\\{\\}]"
#symbols
"<font color=\\"#4444FF\\">", "</font>", "([\\*\\-\\+=:;\%&\\|<>\\(\\)\\[\\]!])"
#identifiers
"<font color=\\"#993333\\">", "</font>", "([a-zA-Z_][a-zA-Z_0-9]*)"
######################################################################
################################# C ++ ###############################
######################################################################
[c++,cpp,cc]
#comment
"<font color=\\"#444444\\">", "</font>", "/\\*.*?\\*/"
#cplus comment
"<font color=\\"#444444\\">", "</font>", "//.*?\$"
#string
"<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#preprocessor line
"<font color=\\"#0000FF\\">", "</font>", "^[ \\t]*#.*?\$"
#string
- "<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
-- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#<files>
- "<font color=\\"#008000\\">", "</font>", "<.*?>"
#comment
- "<font color=\\"#444444\\">", "</font>", "[^/]/\\*.*?\\*/"
#cplus comment
- "<font color=\\"#444444\\">", "</font>", "//.*?\$"
#character constant
"<font color=\\"#008000\\">", "</font>", "'(\\\\)?.'"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#numeric constant
"<font color=\\"#FF0000\\">", "</font>", "\\b((0(x|X)[0-9a-fA-F]*)|(([0-9]+\\.?[0-9]*)|(\\.[0-9]+))((e|E)(\\+|-)?[0-9]+)?)(L|l|UL|ul|u|U|F|f)?\\b"
#storage keyword
"<strong>", "</strong>", "\\b(class|typename|typeid|template|friend|virtual|inline|explicit|operator|overload|public|private|protected|const|extern|auto|register|static|mutable|unsigned|signed|volatile|char|double|float|int|long|short|bool|wchar_t|void|typedef|struct|union|enum)\\b"
#keyword
"<strong>", "</strong>", "\\b(new|delete|this|return|goto|if|else|case|default|switch|break|continue|while|do|for|catch|throw|sizeof|true|false|namespace|using|dynamic_cast|static_cast|reinterpret_cast)\\b"
#braces
"<font color=\\"#4444FF\\"><strong>", "</strong></font>", "[\\{\\}]"
#symbols
"<font color=\\"#4444FF\\">", "</font>", "([\\*\\-\\+=:;\%&\\|<>\\(\\)\\[\\]!])"
#identifiers
"<font color=\\"#993333\\">", "</font>", "([a-zA-Z_][a-zA-Z_0-9]*)"
######################################################################
################################# HTML ###############################
######################################################################
[html]
bgcolor=#ffffff
textcolor=#000000
#comment
"<font color=\\"#444444\\">", "</font>", "<!--.*?-->"
#special chars
"<font color=\\"#FF0000\\">", "</font>", "\\&[-.a-zA-Z0-9#]*;?"
#tag
"<font color=\\"#993333\\">", "</font>", "<(/|!)?[-.a-zA-Z0-9]*.*?>"
#double quote string
- "<font color=\\"#008000\\">", "</font>", "\\".*?\\""
#single quote string
- "<font color=\\"#008000\\">", "</font>", "'.*?'"
#brackets
- "<font color=\\"#0000aa\\"><strong>", "</strong></font>", "[<>]"
#attribute
- "<font color=\\"#0000ff\\">", "</font>", "[^'\\"]+?"
######################################################################
################################# Java ###############################
######################################################################
[java]
#doc comment
"<font color=\\"#444444\\"><i>", "</i></font>", "/\\*\\*.*?\\*/"
#comment
"<font color=\\"#444444\\">", "</font>", "/\\*.*?\\*/"
#cplus comment
"<font color=\\"#444444\\">", "</font>", "//.*?\$"
#string
"<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#single quoted
"<font color=\\"#008000\\">", "</font>", "'([^\\\\]|\\\\[^'])*?'"
#numeric constant
"<font color=\\"#FF0000\\">", "</font>", "\\b((0(x|X)[0-9a-fA-F]*)|(([0-9]+\\.?[0-9]*)|(\\.[0-9]+))((e|E)(\\+|-)?[0-9]+)?)(L|l|UL|ul|u|U|F|f)?\\b"
#include
"<font color=\\"#0000FF\\">", "</font>", "\\b(import|package)\\b.*?\$"
#esc character
- "<font color=\\"#3333FF\\">", "</font>", "\\\\(.|\\n)"
#comment
- "<font color=\\"#444444\\">", "</font>", "[^/]/\\*.*?\\*/"
#storage keyword
"<strong>", "</strong>", "\\b(abstract|boolean|byte|char|class|double|extends|final|float|int|interface|long|native|private|protected|public|short|static|transient|synchronized|void|volatile|implements)\\b"
#keyword
"<strong>", "</strong>", "\\b(break|case|catch|continue|default|do|else|false|finally|for|if|instanceof|new|null|return|super|switch|this|throw|throws|true|try|while)\\b"
#braces and parens
"<strong>", "</strong>", "[\\{\\}\\(\\)\\[\\]]"
#Identifiers
"<font color=\\"#800000\\">", "</font>", "\\b[a-zA-Z_][a-zA-Z0-9_]*\\b"
#symbols
"<font color=\\"#4444FF\\">", "</font>", "([\\*\\-\\+=:;\%&\\|<>!])"
######################################################################
################################# JavaScript #########################
######################################################################
[js,javascipt]
#comment
"<font color=\\"#444444\\">", "</font>", "/\\*.*?\\*/"
#cplus comment
"<font color=\\"#444444\\">", "</font>", "//.*?\$"
#numeric constant
"<font color=\\"#FF0000\\">", "</font>", "\\b((0(x|X)[0-9a-fA-F]*)|(([0-9]+\\.?[0-9]*)|(\\.[0-9]+))((e|E)(\\+|-)?[0-9]+)?)(L|l|UL|ul|u|U|F|f)?\\b"
#events
"<strong>", "</strong>", "\\b(onAbort|onBlur|onClick|onChange|onDblClick|onDragDrop|onError|onFocus|onKeyDown|onKeyPress|onLoad|onMouseDown|onMouseMove|onMouseOut|onMouseOver|onMouseUp|onMove|onResize|onSelect|onSubmit|onUnload)\\b"
#braces
"<font color=\\"#4444FF\\"><strong>", "</strong></font>", "[\\{\\}]"
#statements
"<strong>", "</strong>", "\\b(break|continue|else|for|if|in|new|return|this|typeof|var|while|with)\\b"
#function
"<strong>", "</strong>", "function[\\t ]+([a-zA-Z0-9_]+)[\\t \\(]+.*?[\\n{]"
#function args
- "<font color=\\"#2040a0\\">", "</font>", "\\(.*?\\)"
#function name
- "<font color=\\"#a52a2a\\">", "</font>", "[\\t ][a-zA-Z0-9_]+"
#built in object type
"<font color=\\"#a52a2a\\"><strong>", "</strong></font>", "\\b(anchor|Applet|Area|Array|button|checkbox|Date|document|elements|FileUpload|form|frame|Function|hidden|history|Image|link|location|Math|navigator|Option|password|Plugin|radio|reset|select|string|submit|text|textarea|window)\\b"
#string
"<font color=\\"#008000\\">", "</font>", "\\".*?(\\"|\$)"
#Colors
- "<font color=\\"#4682B4\\">", "</font>", "(aliceblue|antiquewhite|aqua|aquamarine|azure|beige|bisque|black|blanchedalmond|blue|blueviolet|brown|burlywood|cadetblue|chartreuse|chocolate|coral|cornflowerblue|cornsilk|crimson|cyan|darkblue|darkcyan|darkgoldenrod|darkgray|darkgreen|darkkhaki|darkmagenta|darkolivegreen|darkorange|darkorchid|darkred|darksalmon|darkseagreen|darkslateblue|darkslategray|darkturquoise|darkviolet|deeppink|deepskyblue|dimgray|dodgerblue|firebrick|floralwhite|forestgreen|fuchsia|gainsboro|ghostwhite|gold|goldenrod|gray|green|greenyellow|honeydew|hotpink|indianred|indigo|ivory|khaki|lavender|lavenderblush|lawngreen|lemonchiffon|lightblue|lightcoral|lightcyan|lightgoldenrodyellow|lightgreen|lightgrey|lightpink|lightsalmon|lightseagreen|lightskyblue|lightslategray|lightsteelblue|lightyellow|lime|limegreen|linen|magenta|#008000|mediumaquamarine|mediumblue|mediumorchid|mediumpurple|mediumseagreen|mediumslateblue|mediumspringgreen|mediumturquoise|mediumvioletred|midnightblue|mintcream|mistyrose|moccasin|navajowhite|navy|oldlace|olive|olivedrab|orange|orangered|orchid|palegoldenrod|palegreen|paleturquoise|palevioletred|papayawhip|peachpuff|peru|pink|plum|powderblue|purple|red|rosybrown|royalblue|saddlebrown|salmon|sandybrown|seagreen|seashell|sienna|silver|skyblue|slateblue|slategray|snow|springgreen|steelblue|tan|teal|thistle|tomato|turquoise|violet|wheat|white|whitesmoke|yellow|yellowgreen|#[A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9])"
#string
"<font color=\\"#008000\\">", "</font>", "'.*?('|\$)"
#Colors
- "<font color=\\"#4682B4\\">", "</font>", "(aliceblue|antiquewhite|aqua|aquamarine|azure|beige|bisque|black|blanchedalmond|blue|blueviolet|brown|burlywood|cadetblue|chartreuse|chocolate|coral|cornflowerblue|cornsilk|crimson|cyan|darkblue|darkcyan|darkgoldenrod|darkgray|darkgreen|darkkhaki|darkmagenta|darkolivegreen|darkorange|darkorchid|darkred|darksalmon|darkseagreen|darkslateblue|darkslategray|darkturquoise|darkviolet|deeppink|deepskyblue|dimgray|dodgerblue|firebrick|floralwhite|forestgreen|fuchsia|gainsboro|ghostwhite|gold|goldenrod|gray|green|greenyellow|honeydew|hotpink|indianred|indigo|ivory|khaki|lavender|lavenderblush|lawngreen|lemonchiffon|lightblue|lightcoral|lightcyan|lightgoldenrodyellow|lightgreen|lightgrey|lightpink|lightsalmon|lightseagreen|lightskyblue|lightslategray|lightsteelblue|lightyellow|lime|limegreen|linen|magenta|#008000|mediumaquamarine|mediumblue|mediumorchid|mediumpurple|mediumseagreen|mediumslateblue|mediumspringgreen|mediumturquoise|mediumvioletred|midnightblue|mintcream|mistyrose|moccasin|navajowhite|navy|oldlace|olive|olivedrab|orange|orangered|orchid|palegoldenrod|palegreen|paleturquoise|palevioletred|papayawhip|peachpuff|peru|pink|plum|powderblue|purple|red|rosybrown|royalblue|saddlebrown|salmon|sandybrown|seagreen|seashell|sienna|silver|skyblue|slateblue|slategray|snow|springgreen|steelblue|tan|teal|thistle|tomato|turquoise|violet|wheat|white|whitesmoke|yellow|yellowgreen|#[A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9][A-Fa-f0-9])"
#event capturing
"<strong>", "</strong>", "\\b(captureEvents|releaseEvents|routeEvent|handleEvent)\\b.*?(\\)|\$)"
#predefined methods
"<strong>", "</strong>", "\\b(abs|acos|alert|anchor|asin|atan|atan2|back|big|blink|blur|bold|ceil|charAt|clear|clearTimeout|click|close|confirm|cos|escape|eval|exp|fixed|floor|focus|fontcolor|fontsize|forward|getDate|getDay|getHours|getMinutes|getMonth|getSeconds|getTime|getTimezoneOffset|getYear|go|indexOf|isNaN|italics|javaEnabled|join|lastIndexOf|link|log|max|min|open|parse|parseFloat|parseInt|pow|prompt|random|reload|replace|reset|reverse|round|scroll|select|setDate|setHours|setMinutes|setMonth|setSeconds|setTimeout|setTime|setYear|sin|small|sort|split|sqrt|strike|sub|submit|substring|sup|taint|tan|toGMTString|toLocaleString|toLowerCase|toString|toUpperCase|unescape|untaint|UTC|write|writeln)\\b"
#properties
"<font color=\\"#a52a2a\\"><strong>", "</strong></font>", "\\b(action|alinkColor|anchors|appCodeName|appName|appVersion|bgColor|border|checked|complete|cookie|defaultChecked|defaultSelected|defaultStatus|defaultValue|description|E|elements|enabledPlugin|encoding|fgColor|filename|forms|frames|hash|height|host|hostname|href|hspace|index|lastModified|length|linkColor|links|LN2|LN10|LOG2E|LOG10E|lowsrc|method|name|opener|options|parent|pathname|PI|port|protocol|prototype|referrer|search|selected|selectedIndex|self|SQRT1_2|SQRT2|src|status|target|text|title|top|type|URL|userAgent|value|vlinkColor|vspace|width|window)\\b"
#operators
"<font color=\\"#4444FF\\">", "</font>", "([=;->/&|])"
######################################################################
################################# Makefile ###########################
######################################################################
[make,makefile]
#comment
"<font color=\\"#444444\\">", "</font>", "#.*?\$"
#Assignment
"<font color=\\"#2040a0\\">", "</font>", "^( *| [ \\t]*)[A-Za-z0-9_+]*[ \\t]*(\\+|:)?="
#Dependency Line
"<font color=\\"#8b2252\\">", "</font>", "^ *([A-Za-z0-9./\$(){} _\%+-]|\\n)*::?"
#Dependency Target
- "<strong>", "</strong>", "[A-Za-z0-9./\$(){} _\%+-]+"
#Dependency continuation
- "<font color="#000000"><strong>", "</strong></font>", "\\\\\\n"
#comment
- "<font color=\\"#444444\\">", "</font>", "#.*?\$"
#macro
- "<font color=\\"#2040a0\\">", "</font>", "\\\$([A-Za-z0-9_]|\\([^)]*\\)|{[^}]*})"
#int macro
- "<font color=\\"#4080ff\\">", "</font>", "\\\$([<\@*?\%]|\\\$\@)"
#Continuation
"<strong>", "</strong>", "\\\\\$"
#Macro
"<font color=\\"#2040a0\\">", "</font>", "\\\$([A-Za-z0-9_]|\\([^)]*\\)|{[^}]*})"
#Internal Macro
"<font color=\\"#4080FF\\">", "</font>", "\\\$([<\@*?\%]|\\\$\@)"
#Escaped Dollar
"<font color=\\"#444444\\">", "</font>", "\\\$\\\$"
#Include
"<strong>", "</strong>", "^include[ \\t]"
######################################################################
################################# Pascal #############################
######################################################################
[pas,pascal]
bgcolor=#ffffff
textcolor=#000000
#comment1 (* *)
"<font color=\\"#444444\\">", "</font>", "\\(\\*.*?\\*\\)"
#comment1 { }
"<font color=\\"#444444\\">", "</font>", "\\{.*?\\}"
#string
"<font color=\\"#008000\\">", "</font>", "'.*?('|\$)"
#preprocessor line
"<font color=\\"#0000FF\\">", "</font>", "^[ \\t]*#.*?\$"
#comment1 (* *)
- "<font color=\\"#444444\\">", "</font>", "\\(\\*.*?\\*\\)"
#comment1 { }
- "<font color=\\"#444444\\">", "</font>", "\\{.*?\\}"
#character constant
"<font color=\\"#008000\\">", "</font>", "'.'"
#numeric constant
"<font color=\\"#FF0000\\">", "</font>", "\\b((0(x|X)[0-9a-fA-F]*)|[0-9.]+((e|E)(\\+|-)?)?[0-9]*)(L|l|UL|ul|u|U|F|f)?\\b"
#storage and ops
"<strong>", "</strong>", "\\b(and|AND|array|const|div|export|file|function|import|in|IN|label|mod|module|nil|not|NOT|only|or|OR|packed|pow|pragma|procedure|program|protected|qualified|record|restricted|set|type|var)\\b"
#keywords
"<strong>", "</strong>", "\\b(begin|case|do|downto|else|end|for|goto|if|of|otherwise|then|to|until|while|with)\\b"
#symbols
"<font color=\\"#4444FF\\">", "</font>", "([\\*\\-\\+=:;<>\\(\\)\\[\\]!]|[^/]/[^/])"
#identifiers
"<font color=\\"#993333\\">", "</font>", "([a-zA-Z_][a-zA-Z_0-9]*)"
######################################################################
################################# Perl ###############################
######################################################################
[perl]
#comment
"<font color=\\"#444444\\">", "</font>", "#.*?\$"
#variables
"<font color=\\"2040a0\\">", "</font>", "[\$\@\%]\\\$?({[^}]*}|[^a-zA-Z0-9_/\\t\\n\\.,\\\\[\\\\{\\\\(]|[0-9]+|[a-zA-Z_][a-zA-Z0-9_]*)?"
#string; so this part realy is weird, but it works!
"<font color=\\"#008000\\">", "</font>", "((\\"\\")|(\\"[^\\"\\\\]\\")|(\\"[^\\"].*?[^\\\\]\\"))"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#variables
- "<font color=\\"2040a0\\">", "</font>", "[\$\@\%]\\\$?({[^}]*}|[^a-zA-Z0-9_/\\t\\n\\.,\\\\[\\\\{\\\\(]|[0-9]+|[a-zA-Z_][a-zA-Z0-9_]*)?"
#string; so this part realy is weird, but it works!
"<font color=\\"#008000\\">", "</font>", "(('')|('[^'\\\\]')|('[^'].*?[^\\\\]'))"
#esc character
- "<font color=\\"#77dd77\\">", "</font>", "\\\\."
#subroutine header
"<strong>", "</strong>", "sub[\\t ]+([a-zA-Z0-9_]+)[\\t \\n]*(\\{|\\n)"
#subr header coloring
- "<font color=\\"#ff0000\\">", "</font>", "[\\t ]([a-zA-Z0-9_]+)"
#ignore escaped chars
# "", "", "\\\\[#"'\\\$msytq]"
#regex matching
"<font color=\\"#b000d0\\">", "</font>", "(\\b| )((m|q|qq)?/)(\\\\/|[^/\\n])*(/[gimsox]*)"
#regex substitution
"<font color=\\"#b000d0\\">", "</font>", "(\\b| )((s|y|tr)/)(\\\\/|[^/\\n])*(/)[^/\\n]*(/[gimsox]*)"
#keywords
"<strong>", "</strong>", "\\b(my|local|new|if|until|while|elsif|else|eval|unless|for|foreach|continue|exit|die|last|goto|next|redo|return|local|exec|do|use|require|package|eval|BEGIN|END|eq|ne|not|\\|\\||\\&\\&|and|or)\\b"
#library fns
"<font color=\\"a52a2a\\"><strong>", "</strong></font>", "\\b(abs|accept|alarm|atan2|bind|binmode|bless|caller|chdir|chmod|chomp|chop|chr|chroot|chown|closedir|close|connect|cos|crypt|dbmclose|dbmopen|defined|delete|die|dump|each|endgrent|endhostent|endnetent|endprotoent|endpwent|endservent|eof|exec|exists|exp|fctnl|fileno|flock|fork|format|formline|getc|getgrent|getgrgid|getgrnam|gethostbyaddr|gethostbyname|gethostent|getlogin|getnetbyaddr|getnetbyname|getnetent|getpeername|getpgrp|getppid|getpriority|getprotobyname|getprotobynumber|getprotoent|getpwent|getpwnam|getpwuid|getservbyname|getservbyport|getservent|getsockname|getsockopt|glob|gmtime|grep|hex|import|index|int|ioctl|join|keys|kill|lcfirst|lc|length|link|listen|log|localtime|lstat|map|mkdir|msgctl|msgget|msgrcv|no|oct|opendir|open|ord|pack|pipe|pop|pos|printf|print|push|quotemeta|rand|readdir|read|readlink|recv|ref|rename|reset|reverse|rewinddir|rindex|rmdir|scalar|seekdir|seek|select|semctl|semget|semop|send|setgrent|sethostent|setnetent|setpgrp|setpriority|setprotoent|setpwent|setsockopt|shift|shmctl|shmget|shmread|shmwrite|shutdown|sin|sleep|socket|socketpair|sort|splice|split|sprintf|sqrt|srand|stat|study|substr|symlink|syscall|sysopen|sysread|system|syswrite|telldir|tell|tie|tied|time|times|truncate|uc|ucfirst|umask|undef|unlink|unpack|unshift|untie|utime|values|vec|wait|waitpid|wantarray|warn|write|qw|-[rwxoRWXOezsfdlpSbctugkTBMAC])\\b"
#braces and parens
"<strong>", "</strong>", "[\\[\\]\\{\\}\\(\\)]"
#<< stuff
"<i>", "</i>", "<<([^\\n]*).*?^\\1\$"
######################################################################
################################# Plain text #########################
######################################################################
[text]
"", "", "NoTvErYlIkeLyToOCCurInRealLIFE"
######################################################################
EODB
};