eval '(exit $?0)' && eval 'exec perl -S $0 ${1+"$@"}'
& eval 'exec perl -S $0 $argv:q'
if 0;
# THE PRECEEDING STUFF EXECS perl via $PATH
# -*-Fundamental-*-
require 5.000;
# $Id: //guest/michael_marks/perforce/utils/cvs2p4/bin/dochanges#1 $
#
# Richard Geiger
#
# These re's specify the set of expected messages from various p4
# operations which are successful. I.e., if a message is seen that
# doe *not* match one of these, it's considered an error.
#
# ... for "p4 submit"s:
#
$check_submits = <<MSGS;
Change [0-9]+ created with [0-9]+ open file\\(s\\).
^Change [0-9]+ submitted.\$
^Locking [0-9]+ files ...\$
^Submitting change [0-9]+.\$
^(add|branch|edit|delete) //.+#[0-9]+\$
^//.+ - refreshing\$
MSGS
@check_submits = split(/\n/, $check_submits);
#
# ... for "p4 change -f"s:
#
$check_changefs = <<MSGS;
Change [0-9]+ updated.\$
MSGS
@check_changefs = split(/\n/, $check_changefs);
#print "\@check_submits:\n";
#foreach $c (@check_submits) { print "$c\n"; }
#obs##print "\n\@check_changes:\n";
#obs##foreach $c (@check_changes) { print "$c\n"; }
#print "\n\@check_changefs:\n";
#foreach $c (@check_changefs) { print "$c\n"; }
#exit 1;
sub dirname
{
local($dir) = @_;
$dir =~ s%^$%.%; $dir = "$dir/";
if ($dir =~ m%^/[^/]*//*$%) { return "/"; }
if ($dir =~ m%^.*[^/]//*[^/][^/]*//*$%)
{ $dir =~ s%^(.*[^/])//*[^/][^/]*//*$%$1%; { return $dir; } }
return ".";
}
use Carp; # ...or flounder. (This will fail unless 'perl' is a perl5!)
$| = 1;
($Myname = $0) =~ s%^.*/%%;
$Mydir = &dirname($0);
$Here = `/bin/pwd`; chop $Here;
if ($Mydir ne ".") { chdir "$Mydir" || die "$Myname: can't chdir \"$Mydir\": $!"; }
chdir ".." || die "$Myname: can't chdir \"..\": $!";
$Mydir = `/bin/pwd`; chop $Mydir;
chdir $Here || die "$Myname: can't chdir \"$Here\": $!";
#obs#use IPC::Open2;
require "$Mydir/lib/util.pl";
$Convclient = "cvs2p4";
$Usage = <<LIT;
$Myname: usage: $Myname [-v <n>] [-s <start_change_group>] <conversiondir>
LIT
sub usage
{
print STDERR $Usage;
exit 1;
}
sub help
{
print STDERR <<LIT;
$Usage
$Myname <to be written>
LIT
exit 1;
}
# Guarantee that the name directory (may be multiple levels deep)
# exists; create intermediate directories as needed (like mkdir -p)
#
sub insuredir
{
my($d) = @_;
if (! -d $d)
{
my($p) = &dirname($d);
&insuredir($p);
mkdir $d, 0755;
}
}
sub path
{
my($prefix, $file_dir, $file_name) = @_;
my($path);
$path = "$prefix";
if ($file_dir) { $path .= "$file_dir/"; }
$path .= "$file_name";
return $path;
}
# Check a message; if it matches any of the expected ones on @res,
# it's OK; otherwise, declare a problem and rithlessly exit. We
# demand perfection!
#
sub checkmsg
{
my($msg, $from, @res) = @_;
chop $msg;
foreach $re (@res)
{ if ($msg =~ /$re/) { return; } }
print "$Myname: checkmsg: *** $from *** $msg\n";
exit 1;
}
# A temp file used to hold p4 command output
#
$tmpout = "/tmp/p4_submit_out.$$";
# A convenient switch for disabling actual exection of commands.
#
$Do = 1;
# Submit the current default change.
# $msg is the log message to use.
# $who is the original author of the RCS revision(s)
# $time is the original time of the RCS revsision(s)
# $files is the file list for the change.
# @change is the change set; required for building revmap
# (Used to construct the map of RCS revisions -> p4 changes.
#
sub p4submit
{
my($msg, $who, $time, $files, @change) = @_;
my $changenum;
# This bit is to allow us to pass multiple arrays.
# Hipper folks would use refs to arrays, I know.
# I must be as old as Larry Wall's Mom.
#
my (@files) = split(/\001/, $files);
# Start the submit...
#
$p4submit = "$P4 submit -i >$tmpout 2>&1";
if ($V > 0) { print "$Myname: ...| $p4submit\n"; }
if (! open(SUBMITW, "| $p4submit"))
{
print "$Myname: open \"| $p4submit\" failed: $!.\n";
exit 1;
}
$P1 = <<P1;
Change:\tnew
Client:\t$Convclient
User:\t$Username
Status:\tnew
Description:
P1
if ($V > 1) { my $vl; foreach $vl (split(/\n/, $P1)) { print "->SUBMITW: $vl\n"; } }
print SUBMITW $P1;
# Insert the log message...
#
if ($LOGNOTE)
{
my($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time);
my($ts) = sprintf("%04d/%02d/%02d %02d:%02d:%02d",
$year+1900, $mon+1, $mday, $hour, $min, $sec);
$msg .= "\n[imported from CVS by $Convclient at $ts]\n";
}
@msg = split(/\n/, $msg);
foreach $line (@msg)
{
if ($V > 1) { print "->SUBMITW:\t$line\n"; }
print SUBMITW "\t$line\n";
}
$P2 = <<P2;
Files:
P2
if ($V > 1) { my $vl; foreach $vl (split(/\n/, $P2)) { print "->SUBMITW: $vl\n"; } }
print SUBMITW $P2;
# Insert the files list...
#
foreach $file (@files)
{
if ($V > 1) { print "->SUBMITW:\t$file\n"; }
print SUBMITW "$file\n";
}
close SUBMITW;
# OK, now we inspect the output from "p4 submit". (Hey, we used to
# use open2, but it kept leaving zombies around, and I got tired of
# trying to understand why...)
#
if (! open(SUBMITR, "<$tmpout"))
{
print "$Myname: open \"<$tmpout\" failed: $!.\n";
exit 1;
}
# Build %chrevs - the whole first field of the change line, indexed
# by the file path part.
#
foreach $chrev (@change)
{
($revinfo = $chrev) =~ s/ .*//; chop $revinfo;
$revinfo =~ m%^$CVS_MODULE/(.*)/([0-9\.]+)%;
$chrev{$1} = $revinfo;
}
while (<SUBMITR>)
{
if ($V > 0) { print "SUBMITR->:$_"; }
&checkmsg($_, "p4 submit", @check_submits);
# Now update the rev map for each Perforce rev we see...
#
if (/^(add|branch|delete|edit) $P4_DEPOT\/[^\/]+\/(.*)#([0-9]+)$/)
{
$chpath = $2;
$p4rev = $_; chop $p4rev; $p4rev =~ s/^.* //;
$cvsrev = $chrev{$chpath};
$REVMAP{$p4rev} = $cvsrev;
}
if ($_ =~ /^Change ([0-9]+) submitted\.$/) { $changenum = $1; }
}
close SUBMITR;
# Now we spoof the change to appear as done by $who at $time:
#
if ($changenum !~ /[0-9]+/)
{ print "$Myname: assert: didn't see change number <$changenum>.\n"; exit 1; }
# Start "p4 change -i -f"
#
$p4changef = "$P4 change -i -f >$tmpout 2>&1";
if ($V > 0) { print "$Myname: ...| $p4changef\n"; }
if (! open(CHANGEW, "| $p4changef"))
{
print "$Myname: open \"| $p4submit\" failed: $!.\n";
exit 1;
}
my($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime($time);
$Date = sprintf("%4d/%02d/%02d %02d:%02d:%02d", $year+1900, $mon+1, $mday, $hour, $min, $sec);
$C1 = <<C1;
Change:\t$changenum
Date:\t$Date
Client:\t$Convclient
User:\t$who
Status:\tsubmitted
Description:
C1
if ($V > 1) { my $vl; foreach $vl (split(/\n/, $C1)) { print "->CHANGEW: $vl\n"; } }
print CHANGEW $C1;
# Insert the log message. Again.
#
foreach $line (@msg)
{
if ($V > 1) { print "->CHANGEW:\t$line\n"; }
print CHANGEW "\t$line\n";
}
close CHANGEW;
# Now inspect the p4 output for errors...
#
if (! open(CHANGER, "<$tmpout"))
{
print "$Myname: open \"<$tmpout\" failed: $!.\n";
exit 1;
}
while (<CHANGER>)
{
if ($V > 0) { print "SUBMITR->:$_"; }
&checkmsg($_, "p4 change -f", @check_changefs);
}
close CHANGER;
unlink $tmpout;
}
$ext = <<EXTS;
a
bin
bmp
class
coff
com
dll
doc
dvi
dwarf
exe
fm
gif
gz
ico
jar
jpg
lib
o
obj
pdf
ps
tar
xbm
xls
zip
z
EXTS
@ext = split(/\n/, $ext); foreach $ext (@ext) { $ext{$ext} = 1; }
sub is_binary_file
{
my ($path) = @_;
my ($filename) = $path;
$filename =~ s/^.*\///;
my $fileext;
$filename =~ m/\.([^\.]+)$/;
$fileext = $1;
$fileext =~ tr/A-Z/a-z/;
if (defined($ext{$fileext})) { return 1; }
return 0;
}
#if (&is_binary_file($ARGV[0]))
# { print "BINARY\n"; } else { print "TEXT\n"; }
#exit 1;
# Determine whether the depot already has this file on this code line.
# (Used to determine when we need to branch).
#
sub depot_has
{
my($clientfile) = @_;
my($line);
$p4files = "$P4 files '$clientfile' 2>&1";
print "$Myname: $p4files |...\n";
if (! open(FILES, "$p4files |"))
{
print "$Myname: open \"$p4files |\" failed: $!.\n";
exit 1;
}
$line = <FILES>;
#print $line; while(<FILES>) { print $_; }
close FILES;
if ($line =~ /- no such file\(s\)\./
|| $line =~ / - file\(s\) not in client view./
|| $line =~ / - delete change /)
{ return 0; }
else
{ return 1; }
}
# Process one "change" from RCS.
# Called with the set of RCS files/revs to process in @change
#
sub dochange
{
my @map;
print "\n========== change group $do_change_num\n";
if ($V > 0)
{
foreach $c (@change)
{
($filerev, $time, $who, $state, $line, $branches, $prevrev, $options) = split(/$S/, $c);
@filerev = split(/\//, $filerev);
$rev = pop(@filerev);
$file = join("/", @filerev);
print "$who $time $filerev $state $line $branches\n";
}
}
# Get the
#
# Do the revisions...
#
print "=== deletes\n";
$nc = 0; undef $files;
foreach $c (@change)
{
($filerev, $time, $who, $state, $line, $branches, $prevrev, $options) = split(/$S/, $c);
if ($line eq "$TRUNKLINE") { $line = "main"; }
@filerev = split(/\//, $filerev);
$rev = pop(@filerev);
$file = join("/", @filerev);
($file_dir = &dirname($file)) =~ s/^$CVS_MODULE//;
$file_dir =~ s/^\///;
($file_name = $file) =~ s%^.*/%%;
$Depotfile = &path("$P4_DEPOT/$line/", $file_dir, $file_name);
$Clientfile = &path("$Client/$line/", $file_dir, $file_name);
&insuredir(&dirname($Clientfile));
if ($state eq "dead")
{
$Exists_in_depot = &depot_has($Clientfile);
if ($Exists_in_depot)
{
if (! -e $Clientfile)
{
# Create a dummy one to remove (p4/ must be stateless)
#
if (! open(C, ">$Clientfile"))
{
print "$Myname: can't create \"$Clientfile\": $!.\n";
exit 1;
}
close C;
}
if ($sts = &s("$P4 delete '$Clientfile'", $Do)) { exit $sts; } $nc++;
if ($files) { $files .= "\001"; }
$files .= "\t$Depotfile\t# Delete";
}
}
}
if ($nc > 0) { &p4submit("Deleting\n", $who, $time, $files, @change); }
print "===adds/edits===\n";
$nc = 0; undef $files;
foreach $c (@change)
{
($filerev, $time, $who, $state, $line, $branches, $prevrev, $options) = split(/$S/, $c);
if ($line eq "$TRUNKLINE") { $line = "main"; }
@filerev = split(/\//, $filerev);
$rev = pop(@filerev);
$file = join("/", @filerev);
($file_dir = &dirname($file)) =~ s/^$CVS_MODULE//;
$file_dir =~ s/^\///;
($file_name = $file) =~ s%^.*/%%;
$Depotfile = &path("$P4_DEPOT/$line/", $file_dir, $file_name);
$Clientfile = &path("$Client/$line/", $file_dir, $file_name);
$Rcsfile = "$file,v";
if (! -f $Rcsfile)
{
$Rcsfile = &path("$CVS_MODULE/", $file_dir, "Attic/$file_name,v");
if (! -f $Rcsfile)
{ print "$Myname: can't find RCS ,v file for \"$file\".\n"; exit 1; }
}
&insuredir(&dirname($Clientfile));
# Note: we assume binary files never become text files or vice versa
#
if ($state ne "dead")
{
$Exists_in_depot = &depot_has($Clientfile);
if ($Exists_in_depot)
{
if (($sts = &rm($Clientfile)) || ($sts = &s("$CO -p$rev '$Rcsfile' >'$Clientfile'", $Do)))
{ exit $sts; }
if ($sts = &s("$P4 edit '$Clientfile'", $Do)) { exit $sts; } $nc++;
if ($files) { $files .= "\001"; }
$files .= "\t$Depotfile\t# Edit";
}
else
{
if (($sts = &rm($Clientfile)) || ($sts = &s("$CO -p$rev '$Rcsfile' >'$Clientfile'", $Do)))
{ exit $sts; }
# This is where we decide if this pup is a text or a binary file.
#
# We used to just trust the CVS options to tell us when we have
# a binary... but many times binary files get checked in to CVS
# and nobody remembers to tell CVS! So.... we now try to be more
# clever.
if ($options =~ /[ob]/ || -B $Clientfile || &is_binary_file($Clientfile))
{ $type = "binary" }
else
{ $type = "text"; }
if ($options =~ /x/) { $type = "x$type"; }
if ($type =~ /text/) { $type = "k$type"; }
if ($sts = &s("$P4 add -t $type '$Clientfile'", $Do)) { exit $sts; } $nc++;
if ($files) { $files .= "\001"; }
$files .= "\t$Depotfile\t# Add";
}
}
}
if ($nc > 0) { &p4submit($MSGS{$filerev}, $who, $time, $files, @change); }
print "===branches===\n";
$nc = 0; undef $files;
foreach $c (@change)
{
($filerev, $time, $who, $state, $line, $branches, $prevrev, $options) = split(/$S/, $c);
if ($line eq "$TRUNKLINE") { $line = "main"; }
if ($state ne "dead" && $branches ne "-")
{
@filerev = split(/\//, $filerev);
$rev = pop(@filerev);
$file = join("/", @filerev);
($file_dir = &dirname($file)) =~ s/^$CVS_MODULE//;
$file_dir =~ s/^\///;
($file_name = $file) =~ s%^.*/%%;
$Depotfile = &path("$P4_DEPOT/$line/", $file_dir, $file_name);
$Clientfile = &path("$Client/$line/", $file_dir, $file_name);
foreach $branch (split(/:/, $branches))
{
$Depot_branchfile = &path("$P4_DEPOT/$branch/", $file_dir, $file_name);
if ($sts = &s("$P4 integrate '$Depotfile' '$Depot_branchfile'", $Do)) { exit $sts; } $nc++;
if ($files) { $files .= "\001"; }
$files .= "\t$Depot_branchfile\t# Branch";
$Client_branchfile = &path("$Client/$branch/", $file_dir, $file_name);
}
}
}
if ($nc > 0) { &p4submit("Branching\n", $who, $time, $files, @change); }
}
# Expect messages from "p4d checkpoint"
#
$check_checkpoints = <<MSGS;
^command "checkpoint"\$
^p4d_admin>
^: Checkpointing to
^: Saving journal to
^: Truncating
MSGS
@check_checkpoints = split(/\n/, $check_checkpoints);
sub docheckpoint
{
my($cmd) = "rsh $P4HOST -l $P4USER /u/p4/bin/p4d_admin port $P4PORTNUM rsh checkpoint 2>&1 </dev/null |";
print "\n=== checkpoint after $do_change_num\n";
if (! open(RSH, $cmd))
{
print "$Myname: can't open \"$cmd\": $!.\n";
exit 1;
}
print "$Myname: $cmd\n";
while (<RSH>)
{
&checkmsg($_, "p4d_admin rsh checkpoint", @check_checkpoints);
print "$Myname: CHECKPOINT: $_";
}
close RSH;
}
###### main starts here
#
(@pwent) = getpwuid($<);
if ($#pwent < 7)
{
print STDERR "$Myname: can't get your passwd file entry.\n";
exit 1;
}
$Username = $pwent[0];
if ($CHECKPOINT_INTERVAL &&
-x "/bin/domainname" &&
`/bin/domainname` =~ /^netapp.com$/)
{ $Docheckpointing = 1; }
else
{ $Docheckpointing = 0; }
# option switch variables get defaults here...
$Metadata = "metadata";
# option switch variables get defaults here...
$Boolopt = 0;
$V = 1;
$Start_at_ch = 1;
while ($#ARGV >= 0)
{
if ($ARGV[0] eq "-boolopt") { $Boolopt = 1; shift; next; }
elsif ($ARGV[0] eq "-v")
{
shift; if ($ARGV[0] < 0) { &usage; }
$V = $ARGV[0]; shift; next;
}
elsif ($ARGV[0] eq "-s")
{
shift; if ($ARGV[0] < 0) { &usage; }
$Start_at_ch = $ARGV[0]; shift; next;
}
elsif ($ARGV[0] eq "-help")
{ &help; }
elsif ($ARGV[0] =~ /^-/) { &usage; }
if ($Args ne "") { $Args .= " "; }
push(@Args, $ARGV[0]);
shift;
}
if ($#Args ne 0) { &usage; }
$Convdir = $Args[0];
chdir $Convdir || die "$Myname: can't chdir \"$Convdir\": $!";
$Convdir = `/bin/pwd`; chop $Convdir;
chdir $Here || die "$Myname: can't chdir \"$Here\": $!";
$Metadata = "$Convdir/metadata";
$Logmsgs = "$Convdir/logmsgs";
$Changes = "$Convdir/changes";
$Revmap = "$Convdir/revmap";
$Client = "$Convdir/p4";
$LOGNOTE = 1;
require "$Convdir/config";
if (! defined($P4PORT))
{ print "$Myname: no P4PORT in \"$Convdir/config\".\n"; exit 1; }
else
{ $ENV{"P4PORT"} = $P4PORT; }
($P4HOST = $P4PORT) =~ s/:.*//;
($P4PORTNUM = $P4PORT) =~ s/^.*://;
$P4USER = "p4";
$ENV{"P4CLIENT"} = $Convclient;
# These defaults can be overriden in the config file
#
# Path the the RCS co command
#
if (! defined($CO)) { $CO = "/usr/local/bin/co"; }
if (! -x ($CO))
{ print "$Myname: No executable \"co\" command at \"$CO\".\n"; exit 1; }
# Path the the p4 client command
#
if (! defined($P4)) { $P4 = "/usr/local/bin/p4"; }
if (! -x ($P4))
{ print "$Myname: No executable \"p4\" command at \"$P4\".\n"; exit 1; }
if ($Start_at_ch == 1)
{
# We only do this to start (not when restarting from a chackpoint)
#
$P4CMD = "$P4 client -i";
# Remove $Convdir/p4 if it already exists...
# (This is where the client tree gets build)
#
&s("/bin/rm -rf '$Convdir/p4'");
# Remove any revmap files...
#
&s("/bin/rm -f $Revmap.dir $Revmap.pag");
# Remove any existing client defined with this name.
#
&s("$P4 client -d $Convclient");
if (! open(P4, "| $P4CMD"))
{
print "$Myname: open \"/usr/local/bin/p4 client -i\" failed: $!.\n";
exit 1;
}
print P4 <<CLI;
Client: $Convclient
Root: $Client
View:
$P4_DEPOT/... //$Convclient/...
CLI
close P4;
if ($?) { print "$Myname: \"$P4CMD\" failed to create client.\n"; exit 1; }
}
# Open the changes file (this is the genchamges output file)
#
if (! open(CHGS, "<$Changes"))
{ print "$Myname: can't open \"$Changes\": $!\n"; exit 1; }
# Open the REVMAP database...
#
if (! dbmopen(REVMAP, $Revmap, 0666))
{ print "$Myname: can't dbmopen \"$Revmap\": $!\n"; exit 1; }
# Open the log messages database
#
if (! dbmopen(MSGS, $Logmsgs, 0444))
{ print "$Myname: can't dbmopen \"$Logmsgs\": $!\n"; exit 1; }
$gather_change_num = $do_change_num = 0;
while (<CHGS>)
{
if (/^# ([0-9]+)$/)
{
$gather_change_num = $1;
if ($do_change_num)
{
&dochange(@change);
if (($CHECKPOINT_INTERVAL > 0) && (($do_change_num % $CHECKPOINT_INTERVAL) == 0))
{ if ($Docheckpointing) { &docheckpoint; } }
$do_change_num = 0;
}
if ($gather_change_num < $Start_at_ch) { $gather_change_num = 0; next; }
# Clear the change
#
undef @change;
}
elsif ($gather_change_num)
{ push(@change, $_); $do_change_num = $gather_change_num; }
}
if ($do_change_num) { &dochange(@change); }
# I like closure...
#
dbmclose MSGS;
close CHGS;
dbmclose REVMAP;
if ($Docheckpointing) { &docheckpoint; }
# This is the pre- -s capable version...
# keeping it around a few revs for reference.
#
# # Eat the first line of CHGS; it should be a change number...
# #
# $_ = <CHGS>;
# if (/^# ([0-9]+)$/)
# { $change_num = $1; }
# else
# { die "first input line !~ /^# ([0-9]+)\$/...?"; }
#
# $n_changes_done = 0;
# while (! eof CHGS)
# {
# # Clear the change
# #
# undef @change;
#
# # Gather all the revs for this change...
# #
# while (<CHGS>)
# {
# if (/^# ([0-9]+)/) { $change_num = $1; last; }
# chop;
# push(@change, $_);
# }
#
# # And make it so...
# #
# &dochange(@change);
# $n_changes_done++;
#
# # Time to checkpoint?
# #
# if (($CHECKPOINT_INTERVAL > 0) && (($n_changes_done % $CHECKPOINT_INTERVAL) == 0))
# { if ($Docheckpointing) { &docheckpoint; } }
# }