#!/usr/local/bin/perl -w =head1 NAME 91p42revml.t - testing of vcp p4 i/o =cut use strict ; use Carp ; use Test ; use VCP::TestUtils ; my $t = -d 't' ? 't/' : '' ; my $p4root_0 = "${t}p4root_0"; my $p4root_1 = "${t}p4root_1"; my $p4root_2 = "${t}p4root_2"; my $p4root_3 = "${t}p4root_3"; my $p4spec_0 = "p4:revml2p4\@$p4root_0:"; my $p4spec_1 = "p4:revml2p4\@$p4root_1:"; my $p4spec_2 = "p4:revml2p4\@$p4root_2:"; my $p4spec_3 = "p4:revml2p4\@$p4root_3:"; my $deepdir = "one/two/three/four/five"; # what change number to start incremental export at ## my $first_import_1_change; # was called $incr_change #sub clean_p4_branch_spec { ## mutates ( $in, $out ) in place # my $options = $_[2]; # # $_[0] =~ s{(<p4_branch_spec.*?>)(.*)(</p4_branch_spec>)}{ ## $in # my ( $stag, $etag ) = ( $1, $3 ); # local $_ = $2; # s{//ignored/}{//depot/foo/}g; # s{^Options:.*}{}m; # "$stag$_$etag"; # }sge; # # $_[1] =~ s{(<p4_branch_spec.*?>)(.*)(</p4_branch_spec>)}{ ## $out # my ( $stag, $etag ) = ( $1, $3 ); # local $_ = $2; # s/^#.*\r?\n\r?\n?//mg; # s/^Access:.*\r?\n\r?\n//mg; # s{^Options:.*}{}m; # s{(//depot/foo/)${deepdir}/}{$1}mg if $options->{reroot}; # "$stag$_$etag"; # }sge; # #} # # my @tests = ( ## ## revml -> p4 -> revml, bootstrap export ## sub { my $infile = $t . "test-p4-in-0.revml" ; ## ## Idempotency test ## ## These depend on the "test-foo-in-0.revml" files built in the makefile. ## See MakeMaker.PL for how those are generated. ## ## We are also testing to see if we can re-root the files under foo/... ## my $state = "${t}91p42revml_state_A"; rm_dir_tree $state; my $in = slurp $infile ; my $out = get_vcp_output( "$p4spec_0//depot/foo/...", "--repo-id=p4:test_repository", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] } ); s_content qw( rep_desc time p4_info ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot/foo" ; $in =~ s{(id="|_id>)/+ignored}{$1//depot/foo}g; $in =~ s{(id="|_id>)ignored}{$1depot/foo}g; ## We don't know what client name was used. $out =~ s{(user_id>.*)\@.*</user_id>}{$1</user_id>}g; ok_or_diff $out, $in; }, ## Test a single file extraction from a p4 repo. This file exists in ## change 1. sub { my $state = "${t}91p42revml_state_B"; rm_dir_tree $state; ok( get_vcp_output( "$p4spec_0//depot/foo/main/add/f1", "--repo-id=p4:test_repository", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] }, ), qr{<rev_root>depot/foo/main/add</.+<name>f1<.+<rev_id>1<.+<rev_id>2<.+</revml>}s ) ; }, ## Test a single file extraction from a p4 repo. This file does not exist ## in change 1. sub { my $state = "${t}91p42revml_state_C"; rm_dir_tree $state; ok( get_vcp_output( "$p4spec_0//depot/foo/main/add/f2", "--repo-id=p4:test_repository", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] }, ), qr{<rev_root>depot/foo/main/add</.+<name>f2<.+<change_id>2<.+<change_id>3<.+</revml>}s ) ; }, ## ## p4->revml, re-rooting a dir tree ## copies //depot/foo/main/a/deeply/ as if it was a whole repo ## into a target dir as if it were a complete repository. ## sub { my $state = "${t}91p42revml_state_D"; rm_dir_tree $state; my $infile = $t . "test-p4-in-0.revml" ; my $in = slurp $infile ; my $out = get_vcp_output( "$p4spec_0//depot/foo/main/a/deeply/...", "--repo-id=p4:test_repository", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] } ); s_content qw( rep_desc time ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot/foo/main/a/deeply" ; rm_elts qw( mod_time change_id p4_info ), \$in, \$out ; ## We know this changes, let's ASSume it's ok rm_elts qw( branches ), \$in, \$out; ## Strip out all files from $in that shouldn't be there rm_elts qw( rev ), qr{(?:(?!a/deeply).)*?}s, \$in ; ## Adjust the $in paths to look like the result paths. $in is ## now the "expected" output. $in =~ s{<(name|source_name)>main/a/deeply/}{<$1>}g ; $in =~ s{(id="|_id>)/+ignored}{$1//depot/foo}g; $in =~ s{(id="|_id>)ignored}{$1depot/foo}g; ## We don't know what client name was used. $out =~ s{(user_id>.*)\@.*</user_id>}{$1</user_id>}g; ok_or_diff $out, $in; }, ## ## revml -> p4 -> revml, incremental export ## sub { my $infile = $t . "test-p4-in-1.revml" ; my $state = "${t}91p42revml_state_E"; rm_dir_tree $state; copy_dir_tree "${t}91p42revml_state_A" => $state; # see if got the right # of files, changes # p42revml will do detailed checking (the following code) my $in = slurp $infile ; my $out = get_vcp_output( "$p4spec_1//depot/foo/...", "--repo-id=p4:test_repository", "--continue", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] } ); $in =~ s{</rev_root>}{/foo</rev_root>} ; s_content qw( rep_desc time p4_info ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot/foo" ; $in =~ s{(id="|_id>)/+ignored}{$1//depot/foo}g; $in =~ s{(id="|_id>)ignored}{$1depot/foo}g; ## We don't know what client name was used. $out =~ s{(user_id>.*)\@.*</user_id>}{$1</user_id>}g; ok_or_diff $out, $in; }, ## ## p4 -> revml, incremental export in bootstrap mode ## sub { my $infile = $t . "test-p4-in-1-bootstrap.revml" ; my $state = "${t}91p42revml_state_F"; rm_dir_tree $state; copy_dir_tree "${t}91p42revml_state_A" => $state; my $in = slurp $infile ; my $out = get_vcp_output( "$p4spec_1//depot/foo/...", "--repo-id=p4:test_repository", "--continue", "--bootstrap=...", "--run-p4d", { revml_out_spec => [ "--db-dir=$state", "--repo-id=revml:test_repository" ] } ); $in =~ s{</rev_root>}{/foo</rev_root>} ; s_content qw( rep_desc time p4_info ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot/foo" ; $in =~ s{(id="|_id>)/+ignored}{$1//depot/foo}g; $in =~ s{(id="|_id>)ignored}{$1depot/foo}g; ## We don't know what client name was used. $out =~ s{(user_id>.*)\@.*</user_id>}{$1</user_id>}g; ok_or_diff $out, $in; }, ## Check contents of t/p4root_2 ## extract p4 to revml ## build expected from revml ## ## p4->revml, re-rooting a dir tree ## sub { my $infile = $t . "test-p4-in-0.revml" ; my $in = slurp $infile; my $out = get_vcp_output( "$p4spec_2//depot/foo/...", "--repo-id=p4:test_repository", "--run-p4d" ); s_content qw( rep_desc time ), \$in, \$out ; rm_elts qw( p4_info ), \$in, \$out ; ## Adjust the $in paths to look like the result paths. $in is ## now the "expected" output. s_content qw( rev_root ), \$in, "depot/foo" ; $in =~ s{(<(?:source_)?name>)}{${1}${deepdir}/}g; $in =~ s{(id="|id>)/ignored}{$1//depot/foo/${deepdir}}g; $in =~ s{(_id>)ignored}{$1//depot/foo/${deepdir}}g; ## We don't know what client name was used. $out =~ s{(user_id>.*)\@.*</user_id>}{$1</user_id>}g; ok_or_diff $out, $in; }, ## We don't check the contents of t/p4root_3 because that's hard and ## not incredibly necessary. ) ; plan tests => scalar @tests ; my $p4d_borken = p4d_borken ; my $why_skip ; $why_skip .= "p4 command not found\n" unless ( `p4 -V` || 0 ) =~ /^Perforce/ ; $why_skip .= "$p4d_borken\n" if $p4d_borken ; $why_skip ? skip( $why_skip, '' ) : $_->() for @tests ;
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#21 | 5403 | Barrie Slaymaker | - Misc logging, maintainability & debugging improvements | ||
#20 | 3800 | Barrie Slaymaker | - <branches> removed from all code | ||
#19 | 3719 | Barrie Slaymaker | - p4 username is now parsed correctly (but client is lost) | ||
#18 | 3717 | Barrie Slaymaker | - Minor docco cleanup | ||
#17 | 3428 | Barrie Slaymaker | - Test suite cleanup | ||
#16 | 2926 | John Fetkovich |
remove --state-location switch add --db-dir and --repo-id switches build state location from concatenation of those two. |
||
#15 | 2915 | Barrie Slaymaker |
Default to *not* changing the first rev of a branch, add --change-branch-rev-1 to enable the non-default behavior (which is what is used by most of the test suite). |
||
#14 | 2914 | Barrie Slaymaker | Remove need for launch_p4d and general cleanup. | ||
#13 | 2913 | Barrie Slaymaker | Put a user id on each change | ||
#12 | 2863 | Barrie Slaymaker |
Use the absolute path to a file's directory as its branch_id for SCMs that branch in file path space. |
||
#11 | 2854 | John Fetkovich | fixed hard-coded "t/" to be ${t} in state file locations. | ||
#10 | 2843 | John Fetkovich |
remove old comments, add --state-location switch to the tests that didn't have it. |
||
#9 | 2842 | Barrie Slaymaker | Get --continue working in VCP::Source::p4 | ||
#8 | 2840 | John Fetkovich | oops, left a debugging 'die' in the test suite. | ||
#7 | 2836 | John Fetkovich |
Make Source::p4 use --continue and --bootstrap options (partial) update test suite appropriately |
||
#6 | 2763 | John Fetkovich |
test a rerooted revml->p4 to someplace deep in the p4 tree, to make sure that VCP is configuring p4 to map the files to the right place. |
||
#5 | 2743 | John Fetkovich |
Add fields to vcp: source_name, source_filebranch_id, source_branch_id, source_rev_id, source_change_id 1. Alter revml.dtd to include the fields 2. Alter bin/gentrevml to emit legal RevML 3. Extend VCP::Rev to have the fields 4. Extend VCP::{Source,Dest}::revml to read/write the fields (VCP::Dest::revml should die() if VCP tries to emit illegal RevML) 5. Extend VCP::{Source,Dest}::{cvs,p4} to read the fields 7. Get all tests through t/91*.t to pass except those that rely on ch_4 labels |
||
#4 | 2714 | Barrie Slaymaker |
Simplify t/90*cvs.t tests, remove make_cvsroots for speed and simplicity. |
||
#3 | 2650 | John Fetkovich |
Change clean_p4_branch_spec to remove Options: lines. We can't always expect this to be the same. |
||
#2 | 2600 | John Fetkovich | Minor clean-ups. | ||
#1 | 2589 | John Fetkovich |
Split 90p4.t into 90revml2p4_0.t, 90revml2p4_1.t, 91p42revml.t, 95p42cvs.t. Added some utilities to the library files listed. |