html.xsl #1

<?xml version="1.0" encoding="ASCII"?>
<!--This file was created automatically by html2xhtml-->
<!--from the HTML stylesheets.-->
<xsl:stylesheet exclude-result-prefixes="d"
                 xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:d="http://docbook.org/ns/docbook"
xmlns="http://www.w3.org/1999/xhtml" version="1.0">

<!-- ********************************************************************
     $Id: html.xsl 9306 2012-04-28 03:49:00Z bobstayton $
     ********************************************************************

     This file is part of the XSL DocBook Stylesheet distribution.
     See ../README or http://docbook.sf.net/release/xsl/current/ for
     copyright and other information.

     ******************************************************************** -->

<!-- These variables set the align attribute value for HTML output based on
     the writing-mode specified in the gentext file for the document's lang. -->

<xsl:variable name="direction.align.start">
  <xsl:choose>
    <xsl:when test="starts-with($writing.mode, 'lr')">left</xsl:when>
    <xsl:when test="starts-with($writing.mode, 'rl')">right</xsl:when>
    <xsl:otherwise>left</xsl:otherwise>
  </xsl:choose>
</xsl:variable>

<xsl:variable name="direction.align.end">
  <xsl:choose>
    <xsl:when test="starts-with($writing.mode, 'lr')">right</xsl:when>
    <xsl:when test="starts-with($writing.mode, 'rl')">left</xsl:when>
    <xsl:otherwise>right</xsl:otherwise>
  </xsl:choose>
</xsl:variable>

<xsl:variable name="direction.mode">
  <xsl:choose>
    <xsl:when test="starts-with($writing.mode, 'lr')">ltr</xsl:when>
    <xsl:when test="starts-with($writing.mode, 'rl')">rtl</xsl:when>
    <xsl:otherwise>ltr</xsl:otherwise>
  </xsl:choose>
</xsl:variable>

<!-- Support switching to <section> for HTML5 stylesheet -->
<!-- This is an internal variable that does not need to be set by a user -->
<xsl:variable name="div.element">div</xsl:variable>
<!-- Support turning off table  border with border="" for HTML5 -->
<xsl:variable name="table.border.off">0</xsl:variable>

<!-- The generate.html.title template is currently used for generating HTML -->
<!-- "title" attributes for some inline elements only, but not for any -->
<!-- block elements. It is called in eleven places in the inline.xsl -->
<!-- file. But it's called by all the inline.* templates (e.g., -->
<!-- inline.boldseq), which in turn are called by other (element) -->
<!-- templates, so it results, currently, in supporting generation of the -->
<!-- HTML "title" attribute for a total of about 92 elements. -->
<!-- You can use mode="html.title.attribute" to get a title for -->
<!-- an element specified by a param, including targets of cross references. -->
<xsl:template name="generate.html.title">
  <xsl:apply-templates select="." mode="html.title.attribute"/>
</xsl:template>

<xsl:template match="d:acronym|d:abbrev" mode="html.title.attribute">
  <xsl:if test="d:alt">
    <xsl:attribute name="title">
      <xsl:value-of select="normalize-space(d:alt)"/>
    </xsl:attribute>
  </xsl:if>
</xsl:template>

<!-- Generate a title attribute for the context node -->
<!-- This may be the target of an xref -->
<xsl:template match="*" mode="html.title.attribute">
  <xsl:variable name="is.title">
    <xsl:call-template name="gentext.template.exists">
      <xsl:with-param name="context" select="'title'"/>
      <xsl:with-param name="name" select="local-name(.)"/>
      <xsl:with-param name="lang">
        <xsl:call-template name="l10n.language"/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="is.title-numbered">
    <xsl:call-template name="gentext.template.exists">
      <xsl:with-param name="context" select="'title-numbered'"/>
      <xsl:with-param name="name" select="local-name(.)"/>
      <xsl:with-param name="lang">
        <xsl:call-template name="l10n.language"/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="is.title-unnumbered">
    <xsl:call-template name="gentext.template.exists">
      <xsl:with-param name="context" select="'title-unnumbered'"/>
      <xsl:with-param name="name" select="local-name(.)"/>
      <xsl:with-param name="lang">
        <xsl:call-template name="l10n.language"/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="has.title.markup">
    <xsl:apply-templates select="." mode="title.markup">
      <xsl:with-param name="verbose" select="0"/>
    </xsl:apply-templates>
  </xsl:variable>

  <xsl:variable name="gentext.title">
    <xsl:if test="$has.title.markup != '???TITLE???' and                   ($is.title != 0 or                   $is.title-numbered != 0 or                   $is.title-unnumbered != 0)">
      <xsl:apply-templates select="." mode="object.title.markup.textonly"/>
    </xsl:if>
  </xsl:variable>

  <xsl:choose>
    <xsl:when test="string-length($gentext.title) != 0">
      <xsl:attribute name="title">
        <xsl:value-of select="$gentext.title"/>
      </xsl:attribute>
    </xsl:when>
    <!-- Fall back to alt if available -->
    <xsl:when test="d:alt">
      <xsl:attribute name="title">
        <xsl:value-of select="normalize-space(d:alt)"/>
      </xsl:attribute>
    </xsl:when>
  </xsl:choose>
</xsl:template>

<xsl:template match="d:qandaentry" mode="html.title.attribute">
  <xsl:apply-templates select="d:question" mode="html.title.attribute"/>
</xsl:template>

<xsl:template match="d:question" mode="html.title.attribute">
  <xsl:variable name="label.text">
    <xsl:apply-templates select="." mode="qanda.label"/>
  </xsl:variable>

  <xsl:choose>
    <xsl:when test="string-length($label.text) != 0">
      <xsl:attribute name="title">
        <xsl:value-of select="$label.text"/>
      </xsl:attribute>
    </xsl:when>
    <!-- Fall back to alt if available -->
    <xsl:when test="d:alt">
      <xsl:attribute name="title">
        <xsl:value-of select="normalize-space(d:alt)"/>
      </xsl:attribute>
    </xsl:when>
  </xsl:choose>
</xsl:template>

<xsl:template name="dir">
  <xsl:param name="inherit" select="0"/>

  <xsl:variable name="dir">
    <xsl:choose>
      <xsl:when test="@dir">
        <xsl:value-of select="@dir"/>
      </xsl:when>
      <xsl:when test="$inherit != 0">
        <xsl:value-of select="ancestor::*/@dir[1]"/>
      </xsl:when>
    </xsl:choose>
  </xsl:variable>

  <xsl:if test="$dir != ''">
    <xsl:attribute name="dir">
      <xsl:value-of select="$dir"/>
    </xsl:attribute>
  </xsl:if>
</xsl:template>

<xsl:template name="anchor">
  <xsl:param name="node" select="."/>
  <xsl:param name="conditional" select="1"/>

  <xsl:choose>
    <xsl:when test="$generate.id.attributes != 0">
      <!-- No named anchors output when this param is set -->
    </xsl:when>
    <xsl:when test="$conditional = 0 or $node/@id or $node/@xml:id">
      <a>
        <xsl:attribute name="id">
          <xsl:call-template name="object.id">
            <xsl:with-param name="object" select="$node"/>
          </xsl:call-template>
        </xsl:attribute>
      </a>
    </xsl:when>
  </xsl:choose>
</xsl:template>

<xsl:template name="id.attribute">
  <xsl:param name="node" select="."/>
  <xsl:param name="conditional" select="1"/>
  <xsl:choose>
    <xsl:when test="$generate.id.attributes = 0">
      <!-- No id attributes when this param is zero -->
    </xsl:when>
    <xsl:when test="$conditional = 0 or $node/@id or $node/@xml:id">
      <xsl:attribute name="id">
        <xsl:call-template name="object.id">
          <xsl:with-param name="object" select="$node"/>
        </xsl:call-template>
      </xsl:attribute>
    </xsl:when>
  </xsl:choose>
</xsl:template>

<xsl:template name="href.target.uri">
  <xsl:param name="context" select="."/>
  <xsl:param name="object" select="."/>
  <xsl:text>#</xsl:text>
  <xsl:call-template name="object.id">
    <xsl:with-param name="object" select="$object"/>
  </xsl:call-template>
</xsl:template>

<xsl:template name="href.target">
  <xsl:param name="context" select="."/>
  <xsl:param name="object" select="."/>
  <xsl:text>#</xsl:text>
  <xsl:call-template name="object.id">
    <xsl:with-param name="object" select="$object"/>
  </xsl:call-template>
</xsl:template>

<xsl:template name="href.target.with.base.dir">
  <xsl:param name="context" select="."/>
  <xsl:param name="object" select="."/>
  <xsl:if test="$manifest.in.base.dir = 0">
    <xsl:value-of select="$chunk.base.dir"/>
  </xsl:if>
  <xsl:call-template name="href.target">
    <xsl:with-param name="context" select="$context"/>
    <xsl:with-param name="object" select="$object"/>
  </xsl:call-template>
</xsl:template>

<xsl:template name="dingbat">
  <xsl:param name="dingbat">bullet</xsl:param>
  <xsl:call-template name="dingbat.characters">
    <xsl:with-param name="dingbat" select="$dingbat"/>
  </xsl:call-template>
</xsl:template>

<xsl:template name="dingbat.characters">
  <!-- now that I'm using the real serializer, all that dingbat malarky -->
  <!-- isn't necessary anymore... -->
  <xsl:param name="dingbat">bullet</xsl:param>
  <xsl:choose>
    <xsl:when test="$dingbat='bullet'">&#8226;</xsl:when>
    <xsl:when test="$dingbat='copyright'">&#169;</xsl:when>
    <xsl:when test="$dingbat='trademark'">&#8482;</xsl:when>
    <xsl:when test="$dingbat='trade'">&#8482;</xsl:when>
    <xsl:when test="$dingbat='registered'">&#174;</xsl:when>
    <xsl:when test="$dingbat='service'">(SM)</xsl:when>
    <xsl:when test="$dingbat='nbsp'">&#160;</xsl:when>
    <xsl:when test="$dingbat='ldquo'">&#8220;</xsl:when>
    <xsl:when test="$dingbat='rdquo'">&#8221;</xsl:when>
    <xsl:when test="$dingbat='lsquo'">&#8216;</xsl:when>
    <xsl:when test="$dingbat='rsquo'">&#8217;</xsl:when>
    <xsl:when test="$dingbat='em-dash'">&#8212;</xsl:when>
    <xsl:when test="$dingbat='mdash'">&#8212;</xsl:when>
    <xsl:when test="$dingbat='en-dash'">&#8211;</xsl:when>
    <xsl:when test="$dingbat='ndash'">&#8211;</xsl:when>
    <xsl:otherwise>
      <xsl:text>&#8226;</xsl:text>
    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

<xsl:template name="id.warning">
  <xsl:if test="$id.warnings != 0 and not(@id) and not(@xml:id) and parent::*">
    <xsl:variable name="title">
      <xsl:choose>
        <xsl:when test="d:title">
          <xsl:value-of select="d:title[1]"/>
        </xsl:when>
        <xsl:when test="substring(local-name(*[1]),                                   string-length(local-name(*[1])-3) = 'info')                         and *[1]/d:title">
          <xsl:value-of select="*[1]/d:title[1]"/>
        </xsl:when>
        <xsl:when test="d:refmeta/d:refentrytitle">
          <xsl:value-of select="d:refmeta/d:refentrytitle"/>
        </xsl:when>
        <xsl:when test="d:refnamediv/d:refname">
          <xsl:value-of select="d:refnamediv/d:refname[1]"/>
        </xsl:when>
      </xsl:choose>
    </xsl:variable>

    <xsl:message>
      <xsl:text>ID recommended on </xsl:text>
      <xsl:value-of select="local-name(.)"/>
      <xsl:if test="$title != ''">
        <xsl:text>: </xsl:text>
        <xsl:choose>
          <xsl:when test="string-length($title) &gt; 40">
            <xsl:value-of select="substring($title,1,40)"/>
            <xsl:text>...</xsl:text>
          </xsl:when>
          <xsl:otherwise>
            <xsl:value-of select="$title"/>
          </xsl:otherwise>
        </xsl:choose>
      </xsl:if>
    </xsl:message>
  </xsl:if>
</xsl:template>

<xsl:template name="generate.class.attribute">
  <xsl:param name="class" select="local-name(.)"/>
  <xsl:apply-templates select="." mode="class.attribute">
    <xsl:with-param name="class" select="$class"/>
  </xsl:apply-templates>
</xsl:template>

<xsl:template match="*" mode="class.attribute">
  <xsl:param name="class" select="local-name(.)"/>
  <!-- permit customization of class attributes -->
  <!-- Use element name by default -->
  <xsl:variable name="class.value">
    <xsl:apply-templates select="." mode="class.value">
      <xsl:with-param name="class" select="$class"/>
    </xsl:apply-templates>
  </xsl:variable>

  <xsl:if test="string-length(normalize-space($class.value)) != 0">
    <xsl:attribute name="class">
      <xsl:value-of select="$class.value"/>
    </xsl:attribute>
  </xsl:if> 
</xsl:template>

<xsl:template match="*" mode="class.value">
  <xsl:param name="class" select="local-name(.)"/>
  <!-- permit customization of class value only -->
  <!-- Use element name by default -->
  <xsl:value-of select="$class"/>
</xsl:template>

<!-- Apply common attributes such as class, lang, dir -->
<xsl:template name="common.html.attributes">
  <xsl:param name="inherit" select="0"/>
  <xsl:param name="class" select="local-name(.)"/>
  <xsl:apply-templates select="." mode="common.html.attributes">
    <xsl:with-param name="class" select="$class"/>
    <xsl:with-param name="inherit" select="$inherit"/>
  </xsl:apply-templates>
</xsl:template>

<xsl:template match="*" mode="common.html.attributes">
  <xsl:param name="class" select="local-name(.)"/>
  <xsl:param name="inherit" select="0"/>
  <xsl:call-template name="generate.html.lang"/>
  <xsl:call-template name="dir">
    <xsl:with-param name="inherit" select="$inherit"/>
  </xsl:call-template>
  <xsl:apply-templates select="." mode="class.attribute">
    <xsl:with-param name="class" select="$class"/>
  </xsl:apply-templates>
</xsl:template>

<!-- Apply common attributes not including class -->
<xsl:template name="locale.html.attributes">
  <xsl:apply-templates select="." mode="locale.html.attributes"/>
</xsl:template>

<xsl:template match="*" mode="locale.html.attributes">
  <xsl:call-template name="generate.html.lang"/>
  <xsl:call-template name="dir"/>
</xsl:template>

<!-- Pass through any lang attributes -->
<xsl:template name="generate.html.lang">
  <xsl:apply-templates select="." mode="html.lang.attribute"/>
</xsl:template>

<xsl:template match="*" mode="html.lang.attribute">
  <!-- match the attribute name to the output type -->
  <xsl:choose>
    <xsl:when test="@lang and $stylesheet.result.type = 'html'">
      <xsl:attribute name="lang">
        <xsl:value-of select="@lang"/>
      </xsl:attribute>
    </xsl:when>
    <xsl:when test="@lang and $stylesheet.result.type = 'xhtml'">
      <xsl:attribute name="xml:lang">
        <xsl:value-of select="@lang"/>
      </xsl:attribute>
    </xsl:when>
    <xsl:when test="@xml:lang and $stylesheet.result.type = 'html'">
      <xsl:attribute name="lang">
        <xsl:value-of select="@xml:lang"/>
      </xsl:attribute>
    </xsl:when>
    <xsl:when test="@xml:lang and $stylesheet.result.type = 'xhtml'">
      <xsl:attribute name="xml:lang">
        <xsl:value-of select="@xml:lang"/>
      </xsl:attribute>
    </xsl:when>
  </xsl:choose>
</xsl:template>

<!-- ==================================================================== -->
<!-- Insert link to css or insert literal CSS in head element -->
<xsl:template name="generate.css">
  <xsl:choose>
    <xsl:when test="$generate.css.header = 0">
      <xsl:call-template name="generate.css.links"/>
    </xsl:when>
    <xsl:otherwise>
      <xsl:call-template name="generate.css.headers"/>
    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

<xsl:template name="generate.css.headers">
  <xsl:call-template name="generate.default.css.header"/>
  <xsl:call-template name="generate.custom.css.header"/>
</xsl:template>

<xsl:template name="generate.default.css.header">
  <xsl:if test="$make.clean.html != 0 and                  $docbook.css.source != ''">
    <!-- Select default file relative to stylesheet -->
    <xsl:variable name="css.node" select="document($docbook.css.source)/*[1]"/>

    <xsl:call-template name="output.css.header">
      <xsl:with-param name="css.node" select="$css.node"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<xsl:template name="generate.custom.css.header">
  <xsl:if test="$custom.css.source != ''">
    <!-- Select custom file relative to document -->
    <xsl:variable name="css.node" select="document($custom.css.source,.)/*[1]"/>

    <xsl:call-template name="output.css.header">
      <xsl:with-param name="css.node" select="$css.node"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<xsl:template name="output.css.header">
  <xsl:param name="css.node"/> 

  <xsl:choose>
    <xsl:when test="count($css.node) = 0">
    </xsl:when>
    <xsl:otherwise>
      <style type="text/css">
        <xsl:copy-of select="$css.node/text()"/>
      </style>
    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

<!-- ==================================================================== -->
<xsl:template name="generate.css.links">
  <xsl:call-template name="generate.default.css.link"/>
  <xsl:call-template name="generate.custom.css.link"/>
</xsl:template>

<xsl:template name="generate.default.css.link">
  <xsl:if test="$make.clean.html != 0 and                  $docbook.css.link != 0 and                 $docbook.css.source != ''">
    <xsl:variable name="filename">
      <xsl:call-template name="css.output.filename">
        <xsl:with-param name="src" select="$docbook.css.source"/>
      </xsl:call-template>
    </xsl:variable>

    <xsl:call-template name="make.css.link">
      <xsl:with-param name="css.filename" select="$filename"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<xsl:template name="generate.custom.css.link">
  <xsl:if test="$custom.css.source != ''">
    <xsl:variable name="filename">
      <xsl:call-template name="css.output.filename">
        <xsl:with-param name="src" select="$custom.css.source"/>
      </xsl:call-template>
    </xsl:variable>

    <xsl:call-template name="make.css.link">
      <xsl:with-param name="css.filename" select="$filename"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<!-- a CSS link reference must take into account the relative
     path to a CSS file when chunked HTML is output to more than one directory -->
<xsl:template name="make.css.link">
  <xsl:param name="css.filename" select="''"/>

  <xsl:variable name="href">
    <xsl:call-template name="relative.path.link">
      <xsl:with-param name="target.pathname" select="$css.filename"/>
    </xsl:call-template>
  </xsl:variable>

  <xsl:if test="string-length($css.filename) != 0">
    <link rel="stylesheet" type="text/css" href="{$href}"/>
  </xsl:if>
</xsl:template>

<!-- And the same applies to script links -->
<xsl:template name="make.script.link">
  <xsl:param name="script.filename" select="''"/>

  <xsl:variable name="src">
    <xsl:call-template name="relative.path.link">
      <xsl:with-param name="target.pathname" select="$script.filename"/>
    </xsl:call-template>
  </xsl:variable>

  <xsl:if test="string-length($script.filename) != 0">
    <script>
      <xsl:attribute name="src">
        <xsl:value-of select="$src"/>
      </xsl:attribute>
      <xsl:attribute name="type">
        <xsl:value-of select="$html.script.type"/>
      </xsl:attribute>
      <xsl:call-template name="other.script.attributes">
        <xsl:with-param name="script.filename" select="$script.filename"/>
      </xsl:call-template>
    </script>
  </xsl:if>
</xsl:template>

<xsl:template name="other.script.attributes">
  <xsl:param name="script.filename"/>
  <!-- Placeholder template to allow customization to 
       insert additional script element attributes if needed -->
</xsl:template>

<xsl:template name="relative.path.link">
  <xsl:param name="target.pathname"/>
  
  <xsl:variable name="href.to.uri" select="$target.pathname"/>

  <xsl:variable name="href.from.uri">
    <xsl:call-template name="href.target.uri">
      <xsl:with-param name="object" select="."/>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="href.to">
    <xsl:call-template name="trim.common.uri.paths">
      <xsl:with-param name="uriA" select="$href.to.uri"/>
      <xsl:with-param name="uriB" select="$href.from.uri"/>
      <xsl:with-param name="return" select="'A'"/>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="href.from">
    <xsl:call-template name="trim.common.uri.paths">
      <xsl:with-param name="uriA" select="$href.to.uri"/>
      <xsl:with-param name="uriB" select="$href.from.uri"/>
      <xsl:with-param name="return" select="'B'"/>
    </xsl:call-template>
  </xsl:variable>
  <xsl:variable name="depth">
    <xsl:call-template name="count.uri.path.depth">
      <xsl:with-param name="filename" select="$href.from"/>
    </xsl:call-template>
  </xsl:variable>
  <xsl:variable name="href">
    <xsl:call-template name="copy-string">
      <xsl:with-param name="string" select="'../'"/>
      <xsl:with-param name="count" select="$depth"/>
    </xsl:call-template>
    <xsl:value-of select="$href.to"/>
  </xsl:variable>

  <xsl:value-of select="$href"/>
</xsl:template>

<!-- ==================================================================== -->

<xsl:template name="generate.css.files">
  <xsl:call-template name="generate.default.css.file"/>
  <xsl:call-template name="generate.custom.css.file"/>
</xsl:template>

<xsl:template name="generate.default.css.file">
  <xsl:if test="$make.clean.html != 0 and                  $generate.css.header = 0 and                 $docbook.css.source != ''">
    <!-- Select default file relative to stylesheet -->
    <xsl:variable name="css.node" select="document($docbook.css.source)/*[1]"/>

    <xsl:call-template name="generate.css.file">
      <xsl:with-param name="src" select="$docbook.css.source"/>
      <xsl:with-param name="css.node" select="$css.node"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<xsl:template name="generate.custom.css.file">
  <xsl:if test="$custom.css.source != '' and                 $generate.css.header = 0">
    <!-- Select custom file relative to document -->
    <xsl:variable name="css.node" select="document($custom.css.source,.)/*[1]"/>

    <xsl:call-template name="generate.css.file">
      <xsl:with-param name="src" select="$custom.css.source"/>
      <xsl:with-param name="css.node" select="$css.node"/>
    </xsl:call-template>
  </xsl:if>
</xsl:template>

<xsl:template name="generate.css.file">
  <xsl:param name="css.node"/> 
  <xsl:param name="src" select="''"/> 

  <xsl:variable name="css.text" select="$css.node/text()"/>

  <xsl:choose>
    <xsl:when test="count($css.node) = 0">
      <xsl:message>
        <xsl:text>ERROR: no root element for CSS source file'</xsl:text>
        <xsl:value-of select="$src"/>
        <xsl:text>'.</xsl:text>
      </xsl:message>
    </xsl:when>
    <xsl:otherwise>
      <xsl:variable name="filename">
        <xsl:call-template name="css.output.pathname">
          <xsl:with-param name="src" select="$src"/>
          <xsl:with-param name="content" select="$css.node"/>
        </xsl:call-template>
      </xsl:variable>

      <xsl:call-template name="write.text.chunk">
        <xsl:with-param name="filename" select="$filename"/>
        <xsl:with-param name="content" select="$css.text"/>
      </xsl:call-template>

    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

<xsl:template name="css.output.filename">
  <xsl:param name="content"/>
  <xsl:param name="src" select="''"/>
  
  <xsl:variable name="candidate">
    <xsl:choose>
      <xsl:when test="string-length($src) = 0">
        <xsl:message>
          <xsl:text>ERROR: missing CSS input filename.</xsl:text>
        </xsl:message>
      </xsl:when>
      <xsl:when test="substring($src,string-length($src)-3) = '.xml'">
        <xsl:value-of select="substring($src, 1, string-length($src) - 4)"/>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$src"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:variable>
  <xsl:value-of select="$candidate"/>
</xsl:template>

<xsl:template name="css.output.pathname">
  <xsl:param name="content"/>
  <xsl:param name="src" select="''"/>

  <xsl:variable name="file">
    <xsl:call-template name="css.output.filename">
      <xsl:with-param name="content" select="$content"/>
      <xsl:with-param name="src" select="$src"/>
    </xsl:call-template>
  </xsl:variable>

  <xsl:variable name="path" select="concat($chunk.base.dir, $file)"/>
  <xsl:value-of select="$path"/>
  
</xsl:template>

</xsl:stylesheet>