/************************************************************ ** $Id: milter.c,v 0.7 2003/11/24 18:38:35 bcx Exp $ ** ** Copyright Bryan Costales and Perforce Software, Inc. 2003 ** ** This code is "open source" as defined by version 1.9 of ** the Open Source Definition from: ** ** http://www.opensource.org/docs/definition.php. ** ** Entry points defined in this file: ** ** All the milter entry points and: ** main(): ** Process command line an launch the milter. *************************************************************/ # define EXTERN extern # include "slow.h" void free_priv(SMFICTX *ctx) { PRIV *priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) return; if (priv->iptxt != NULL) (void) free(priv->iptxt); if (priv->midstr != NULL) (void) free(priv->midstr); if (priv->hdrrcpts != NULL) (void) free_list(priv->hdrrcpts); (void) free((char *)priv); return; } /* ** Process Connect: ** ** This is after sendmail has accepted the connection, ** but before sendmail has sent its initial greeting. ** ** For the {client_resolv} test to work, you need to add the following ** to your sendmail mc configuration file: ** ** define(`confMILTER_MACROS_CONNECT', confMILTER_MACROS_CONNECT``,{client_resolve}'') ** */ sfsistat xxfi_connect(SMFICTX *ctx, char *hostname, _SOCK_ADDR *ha) { PRIV *priv; struct in_addr in; char *sym; bool badfamily; /* * Set up the private (thread specific) data that will persist * throughout the connection. A connection may * contain multiple envelopes. */ priv = (PRIV *)try_alloc(__FILE__, __LINE__, sizeof(PRIV), TRUE); if (priv == NULL) return SMFIS_TEMPFAIL; (void) memset((char *)priv, 0, sizeof(PRIV)); priv->hdrrcpts = NULL; priv->midstr = NULL; if (smfi_setpriv(ctx, (void *)priv) == MI_FAILURE) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Register private data"); return SMFIS_TEMPFAIL; } /* * Gather the IP number of the connecting host and * record it in the private data. */ badfamily = FALSE; if (ha == NULL || ha->sa_family != AF_INET) { /* * This is not an IPv4 address (sendmail may have * been run with the -bs command-line switch. * Since we cannot record it, we accept * the whole connection. */ badfamily = TRUE; set_bit(BIT_NOTINET, priv->bits); /* XXX log what happened? */ } else { (void) memcpy(&(priv->ip), ha->sa_data, sizeof(PRIMARY_DATUM)); (void) memcpy(&in.s_addr, ha->sa_data, sizeof(in.s_addr)); # ifndef WORDS_BIGENDIAN in.s_addr = revbytes(in.s_addr); # endif priv->iptxt = try_strdup(__FILE__, __LINE__, inet_ntoa(in), TRUE); if (priv->iptxt == NULL) return SMFIS_TEMPFAIL; /* * If we are allowed to check RBL hosts, * we do it here. We can check multiple * RBL hosts, but beware: each takes time. */ if (RBLList != NULL) { char **p; for (p = RBLList; *p != NULL; ++p) { if (rbl_lookup(*p, priv->iptxt, TRUE) != 0) continue; set_bit(BIT_RBL_BAD, priv->bits); break; } } /* * If this connection is from one of our MX hosts * save that information for future use, and * clear the saved ip data. */ if (is_in_list(priv->iptxt, MxHosts) == TRUE || is_in_list(hostname, MxHosts) == TRUE) { /* * Yes, from our MX server, so clear the IP * information. It will be later snarfed * from a Received: header. * Note this will only happen if the config * allows it. */ if (LookBackOne == TRUE) { priv->ip = (PRIMARY_DATUM)0; if (priv->iptxt != NULL) (void) free(priv->iptxt); priv->iptxt = NULL; set_bit(BIT_FROMMX, priv->bits); } } } /* * sendmail looks up the real host name, to get its * IP number. It then reverse looks up the IP number * to get the host name. If the two don't match, sendmail * consider the hostname forged. * * If the milter configuration file allows this * test, perform it. */ if (CheckForged == TRUE) { sym = smfi_getsymval(ctx, "{client_resolve}"); if (sym != NULL && strcasecmp(sym, "forged") == 0) set_bit(BIT_FORGED, priv->bits); } /* * Hook for regression testing. If you change this * output, change test.c too. */ if (isdebug(BUG_CONNECT)) { (void)printf("%s [%s]: flags=%s%s%s\n", hostname==NULL?"":hostname, priv->iptxt==NULL?"":priv->iptxt, isbitset(BIT_FROMMX, priv->bits)?"[MMX]":"", isbitset(BIT_NOTINET, priv->bits)?"[NET]":"", isbitset(BIT_FORGED, priv->bits)?"[FOR]":""); } /* * If this is a connection on standard input or some * other non-IPv4 network. Accept it, because we cannot * associate an IP number with it. */ if (badfamily == TRUE) return SMFIS_ACCEPT; return SMFIS_CONTINUE; } /* ** Process the HELO/EHLO command ** ** The argument contains the host name give in the ** HELO/EHLO command. This is the literal argument ** and cannot be trusted. ** ** Note to get the "advanced write" test to work, you need to patch ** V8.13 sendmail with the "patchs/sendmail.patch" file. Then paste ** the following define into your sendmail mc configuration file. ** define(`confMILTER_MACROS_HELO', confMILTER_MACROS_HELO``, {illegalpipe}'') ** */ sfsistat xxfi_helo(SMFICTX *ctx, char *host) { PRIV *priv; char *sym; /* we ignore the passed argument "host" */ priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } /* * If the milter configuration file allow it, check for * an illegal advance write. */ if(AdvanceWrite == TRUE) { sym = smfi_getsymval(ctx, "{illegalpipe}"); if (sym != NULL && strcasecmp(sym, "true") == 0) set_bit(BIT_ADVANCEWRITE, priv->bits); } /* * Hook for regression testing. If you change this * output, change test.c too. */ if (isdebug(BUG_HELO)) { (void)printf("%s: flags=%s\n", host==NULL?"":host, isbitset(BIT_ADVANCEWRITE, priv->bits)?"[PIP]":""); } return SMFIS_CONTINUE; } /* ** Process MAIL FROM: ** ** argv contains a single recipient address in argv[0] ** the rest of argv is the MAIL FROM: arguments. These are ** also captured in the macros passed by sendmail. ** ** This function is usually called only once. */ sfsistat xxfi_envfrom(SMFICTX *ctx, char **argv) { char *cp, *ep; PRIV *priv; if (argv == NULL) return SMFIS_CONTINUE; /* * If the milter configuration file prevents this * test, skip it. */ if (CheckFromHeader == FALSE) return SMFIS_CONTINUE; priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } /* * Check the envelope sender's host. */ cp = strchr(argv[0], '@'); /* * Missing @ means either a local address (user) * or an empty angle brace pair (<>),which * is legal for bounced email. */ if (cp == NULL) { if (isdebug(BUG_MAILFROM)) { if (strcmp("<>", argv[0]) == 0) (void) printf("%s: okay bounce sender\n", argv[0]); else (void) printf("%s: okay local\n", argv[0]); } return SMFIS_CONTINUE; } ++cp; ep = strchr(cp, '>'); if (ep != NULL) { *ep = '\0'; --ep; } else ep = cp+strlen(cp); /* * A missing host part after the @ (i.e. "user@") is bad. */ if (cp >= ep) { set_bit(BIT_BAD_FROM_HEAD, priv->bits); } else { /* * We don't count it an error if the lookup returns * a temporary error. */ if (gethostbyname(cp) == NULL) { if (h_errno != TRY_AGAIN) set_bit(BIT_BAD_FROM_HEAD, priv->bits); } } if (isdebug(BUG_MAILFROM)) (void) printf("%s: flags=%s\n", argv[0], isbitset(BIT_BAD_FROM_HEAD, priv->bits)?"[FRM]":"" ); return SMFIS_CONTINUE; } /* ** Process the RCPT TO: recipient address. This may be called ** multiple times, once for each RCPT TO: command. ** Each envelope recipient is in argv[0]. */ sfsistat xxfi_envto(SMFICTX *ctx, char **argv) { PRIV *priv; char *cp, *ep; priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } cp = argv[0]; /* * Strip surrounding angle braces if any. */ if (*cp == '<') { ++cp; if ((ep = strchr(cp, '>')) != NULL) *ep ='0'; } /* * We reject any honeypot address, but count it. * Note that since sendmail will count it as a bad recipient, * we decrement the bad recipient count ahead of time. */ if (is_in_list(cp, HoneyHosts) == TRUE) { char buf[BUFSIZ]; set_bit(BIT_GOT_HONEYPOT, priv->bits); if (isdebug(BUG_RCPTTO)) (void)printf("%s: flags=%s\n", argv[0], isbitset(BIT_GOT_HONEYPOT,priv->bits)?"[HON]":""); ++(priv->honeyrcpts); --(priv->badrcpts); (void) snprintf(buf, BUFSIZ, "%s... User unknown", argv[0]); smfi_setreply(ctx, "550", "5.1.1", buf); return SMFIS_REJECT; } /* * If it is not a honey pot address, we count it as * good, with the caveat that a later milter or sendmail * may yet reject it. */ ++(priv->envrcpts); if (isdebug(BUG_RCPTTO)) (void)printf("%s: count=%d\n", argv[0], priv->envrcpts); return SMFIS_CONTINUE; } /* ** End of the envlope recipient list is marked by ** the start of the DATA phase with the collection ** of headers. Note that if there are no good recipients ** left in the recipeint list, sendmail will jump right ** to the xxfi_abort() routine instead. */ /* ** Process a header ** ** This routine is called once per header. ** This routine is usually called many times. ** In this routine we screen: ** XTrackHeader: to see if we already saw this message. ** To:, Cc:, and Bcc: to count header recipients ** Received (if BIT_FROMMX is set, see xxfi_connect) ** Message-Id: to detect bad Message-Ids */ sfsistat xxfi_header(SMFICTX *ctx, char *field, char *value) { PRIV *priv; char *cp; priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } /* * If the XTrackHeader appears, accept the message, * because this means it was already screened. */ if (XTrackHeader != NULL && strcasecmp(field, XTrackHeader) == 0) { if (isdebug(BUG_HEADER)) printf("%s: %s accepted\n", field, value); /* XXX log what happened? */ return SMFIS_ACCEPT; } /* * If this is a Received: header, and if we got this * message from one of our MX servers, try to snarf * the sending IP number. */ if (priv->ip == 0 && LookBackOne == TRUE && strcasecmp(field, "Received") == 0) { struct in_addr in; priv->ip = header_received(value); if (priv->ip == 0) { if (isdebug(BUG_HEADER)) printf("Received: not from our MX\n"); return SMFIS_CONTINUE; } /* * Got the sending IP number, so save it to * the text form too. */ (void) memcpy(&in.s_addr, &priv->ip, sizeof(in.s_addr)); # ifndef WORDS_BIGENDIAN in.s_addr = revbytes(in.s_addr); # endif priv->iptxt = try_strdup(__FILE__, __LINE__, inet_ntoa(in), TRUE); if (priv->iptxt == NULL) return SMFIS_TEMPFAIL; if (isdebug(BUG_HEADER)) printf("Received: our MX said %s\n", priv->iptxt); return SMFIS_CONTINUE; } /* * Is the header one that contains recipients? */ if (strcasecmp(field, "To") == 0 || strcasecmp(field, "Cc") == 0 || strcasecmp(field, "Bcc") == 0) { /* * Yes, so add to the list of header recipients. */ priv->hdrrcpts = header_recipient(priv->hdrrcpts, value); if (isdebug(BUG_HEADER)) { if (strcasecmp(field, "To") == 0) (void)print_list("To", priv->hdrrcpts, stdout); else (void) printf("%s: %s\n", field, (priv->hdrrcpts)[0]); } return SMFIS_CONTINUE; } if (strcasecmp(field, "Message-Id") == 0) { priv->midstr = try_strdup(__FILE__, __LINE__, field, TRUE); if (priv->iptxt == NULL) return SMFIS_TEMPFAIL; if (CheckMessageId == TRUE) { if (header_messageid(value) == FALSE) set_bit(BIT_BAD_MSG_ID, priv->bits); } if (isdebug(BUG_HEADER)) (void) printf("%s: %s flags=%s\n", field, value, isbitset(BIT_BAD_MSG_ID, priv->bits)?"[MID]":""); } if (CheckFromHeader == TRUE && strcasecmp(field, "From") == 0) { /* * Strip away the RFC 822 cruft from the address * and move the pointer to the first char following * the @ so that we can look up the host name. */ cp = deRFC822(value); if (cp != NULL && (cp = strchr(cp, '@')) != NULL && *(++cp) != '\0') { /* * We don't count it an error if the lookup returns * a temporary error. * Note that we cannot check if it is addressed to * the local host because we may be relaying to * other hosts or domains (perhaps as MX servers). * So we only check to see if it exists. */ if (gethostbyname(cp) == NULL) { if (h_errno != TRY_AGAIN) set_bit(BIT_BAD_FROM_HEAD, priv->bits); } } if (isdebug(BUG_HEADER)) (void) printf("%s: %s flags=%s\n", field, value, isbitset(BIT_BAD_FROM_HEAD, priv->bits)?"[FRM]":""); } return SMFIS_CONTINUE; } /* ** After all headers have been processed, we can check ** to see if any were missing. ** Also we can count the header recipients here. */ sfsistat xxfi_eoh(SMFICTX *ctx) { PRIV *priv; char **rp; priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } /* * If there was no Message-ID header, we count this as bad too. */ if (CheckMessageId == TRUE && priv->midstr == NULL) set_bit(BIT_BAD_MSG_ID, priv->bits); { if (isdebug(BUG_EOH)) (void) printf("eoh: flags=%s\n", isbitset(BIT_BAD_MSG_ID, priv->bits)?"[MID]":""); } /* * Here we count up the number of header recipients. */ priv->nhdrrcpts = 0; if (priv->hdrrcpts != NULL) { for (rp = priv->hdrrcpts; *rp != NULL; ++rp) ++(priv->nhdrrcpts); priv->hdrrcpts = free_list(priv->hdrrcpts); } if (isdebug(BUG_EOH)) (void) printf("eoh: nhdrrcpts=%d\n", priv->nhdrrcpts); return SMFIS_CONTINUE; } /* ** Gather up the information needed to write to the database. ** Do the database writes, and return what to do next. ** This is called from xxfi_eom and xxfi_abort. */ sfsistat push_to_db(SMFICTX *ctx, PRIV *priv, int log) { SECONDARY_KEY k; SECONDARY_DATUM event; PRIMARY_DATUM t; if (isdebug(BUG_DB) || isdebug(BUG_ADD) || isdebug(BUG_DELETE)) t = 1234000000; else (void)time(&t); event.eventmap = priv->bits; event.envrcpts = priv->envrcpts; event.headrcpts = priv->nhdrrcpts; event.honeyrcpts = priv->honeyrcpts; event.badrcpts = priv->badrcpts; (void) memset(event.msgid, '\0', MAX_MESSAGE_ID); if (priv->midstr != NULL) (void) memcpy(event.msgid, priv->midstr, MAX_MESSAGE_ID -1); if (event.headrcpts > MaxHeaderRcpts) set_bit(BIT_TOO_MANY_HDR_RCPTS, event.eventmap); if (event.envrcpts > MaxRcptsPerEnvelope) set_bit(BIT_TOO_MANY_ENV_RCPTS, event.eventmap); if (put_ip_database(Dp1, priv->ip, t, FALSE, log) != 0) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "Primary database write", PrimaryDatabaseLoc); return SMFIS_TEMPFAIL; } k.ip = priv->ip; k.date = t; if (put_event_database(Dp2, &k, &event) != 0) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "Secondary database write", SecondaryDatabaseLoc); return SMFIS_TEMPFAIL; } # if HAVE_SYSLOG if (DoLog == TRUE && LogEvents == TRUE) syslog(LOG_INFO, "%s%s", LogPrefix, event_to_str(priv->iptxt, t, &event, TRUE)); # endif (void) free_priv(ctx); (void) smfi_setpriv(ctx, NULL); return SMFIS_CONTINUE; } /* ** Process the end-of-envelope. Here we summarize everything and ** update the database. Note that we update the database here, ** because an earlier Milter may have rejected the message based ** on the body contents. ** ** Note to get the ${nbadrcpts} value, you need be running V8.13 sendmail ** and you need to paste the following define into your sendmail ** mc configuration file. ** define(`confMILTER_MACROS_ENVRCPT', confMILTER_MACROS_ENVRCPT``, {nbadrcpts}'') ** */ sfsistat xxfi_eom(SMFICTX *ctx) { PRIV *priv; char *sym; priv = (PRIV *)smfi_getpriv(ctx); if (priv == NULL) { milterr(Prog, __FILE__, __LINE__, TRUE, errno, "ABORTED", "Private data is NULL"); return SMFIS_TEMPFAIL; } priv->badrcpts = 0; sym = smfi_getsymval(ctx, "{nbadrcpts}"); if (sym != NULL) priv->badrcpts = atoi(sym); if (isdebug(BUG_EOM)) { return SMFIS_ACCEPT; } return push_to_db(ctx, priv, TRUE); } sfsistat xxfi_close(SMFICTX *ctx) { PRIV *priv; priv = (PRIV *)smfi_getpriv(ctx); if (priv != NULL) { (void) free_priv(ctx); (void) smfi_setpriv(ctx, NULL); } return SMFIS_ACCEPT; } sfsistat xxfi_abort(SMFICTX *ctx) { PRIV *priv; priv = (PRIV *)smfi_getpriv(ctx); if (priv != NULL) { set_bit(BIT_MILTER_ABORTED, priv->bits); if (! isdebug(BUG_ABORT)) return push_to_db(ctx, priv, TRUE); } return SMFIS_ACCEPT; } struct smfiDesc SmfiDesc = { NULL, /* filter name */ SMFI_VERSION, /* version code -- do not change */ SMFIF_NONE, /* flags */ xxfi_connect, /* connection info filter */ xxfi_helo, /* SMTP HELO command filter */ xxfi_envfrom, /* envelope sender filter */ xxfi_envto, /* envelope recipient filter */ xxfi_header, /* header filter */ xxfi_eoh, /* end of header */ NULL, /* This milter ignores the body */ xxfi_eom, /* end of message */ xxfi_abort, /* message aborted */ xxfi_close /* connection cleanup */ }; int main(argc, argv) int argc; char *argv[]; { int c; char *cf = NULL; bool force; int ret; int mode; char *xtest; char buf[BUFSIZ]; extern int errno; Prog = try_strdup(__FILE__, __LINE__, basename(argv[0]), FALSE); SmfiDesc.xxfi_name = Prog; /* * The run-by-hand interface is by name only. */ mode = MODE_RUN_AS_MILTER; if (strcmp(Prog, "slowedit") == 0) mode = MODE_ADD_BY_HAND; # if HAVE_SYSLOG openlog(Prog, LOG_NDELAY, LOG_MAIL); # endif /* Process command line options */ xtest = NULL; force = FALSE; Debugbits = 0L; Verbose = FALSE; while ((c = getopt(argc, argv, "EdX:D:fC:Vv")) != -1) { switch (c) { /* Verbose let's you see what is happening */ /* Note that verbose is not debug */ case 'v': Verbose = TRUE; break; /* Edit mode, break and let slowedit() handle it. */ case 'E': if (Verbose == TRUE) (void) printf("Reset Mode to EDIT\n"); mode = MODE_ADD_BY_HAND; goto skip; /* Specify configuration file */ case 'C': cf = optarg; break; /* Dump the database to stdout */ case 'd': if (Verbose == TRUE) (void) printf("Reset Mode to DBDUMP\n"); mode = MODE_DUMP_DATABASE; break; /* Print the program's version and exit */ case 'V': printf("%s: %s\n", Prog, VERSION); exit(0); break; /* * To bootstrap the system, use -f to * force the databases to be created if * they do not already exists. */ case 'f': if (Verbose == TRUE) (void) printf("Reset Mode to FORCE\n"); mode = MODE_BOOTSTRAP; force = TRUE; break; /* * Debugging is by catagory. e.g. -Dmx prints * the mx records found for the LocalHostName. */ case 'D': (void) set_debug(optarg); break; case 'X': xtest = optarg; break; } } /* * If slowedit mode, leave the rest of argc, argv available. */ skip: /* Read the configuration file */ if (cf == NULL) cf = CFFILE; (void) setdefaults(); (void) readconf(Prog, cf); /* * Regression testing. */ if (isdebug(BUG_CONNECT)) test_connect(xtest); if (isdebug(BUG_HELO)) test_helo(xtest); if (isdebug(BUG_MAILFROM)) test_mailfrom(xtest); if (isdebug(BUG_MAILFROM)) test_mailfrom(xtest); if (isdebug(BUG_RCPTTO)) test_rcptto(xtest); if (isdebug(BUG_HEADER)) test_header(xtest); if (isdebug(BUG_EOH)) test_eoh(xtest); if (isdebug(BUG_EOM)) test_eom(xtest); if (isdebug(BUG_CLOSE)) test_close(xtest); if (isdebug(BUG_ABORT)) test_abort(xtest); if (isdebug(BUG_DB)) test_db(xtest); if (isdebug(BUG_ADD)) test_add(xtest); if (isdebug(BUG_DELETE)) test_delete(xtest); if (isdebug(BUG_RBL)) test_rbl(xtest); /* * Open both databases. The db flags used are in * database.c. Here we only supply the file name. */ Dp1 = open_database(PrimaryDatabaseLoc, force); if (Dp1 == NULL) { milterr(Prog, __FILE__, __LINE__, FALSE, errno, "Primary database open", PrimaryDatabaseLoc); } Dp2 = open_database(SecondaryDatabaseLoc, force); if (Dp2 == NULL) { milterr(Prog, __FILE__, __LINE__, FALSE, errno, "Secondary database open", SecondaryDatabaseLoc); } if (mode == MODE_BOOTSTRAP) { if (Verbose == TRUE) { printf("%s: successfully created.\n", PrimaryDatabaseLoc); printf("%s: successfully created.\n", SecondaryDatabaseLoc); } # if HAVE_SYSLOG if (DoLog == TRUE) syslog(LOG_INFO, "%s%s created, %s created", LogPrefix, PrimaryDatabaseLoc, SecondaryDatabaseLoc); # endif return EX_OK; } if (mode == MODE_DUMP_DATABASE) { if (Verbose == TRUE) { printf("Dumping %s and %s\n", PrimaryDatabaseLoc, SecondaryDatabaseLoc); } ret = dump_database(Dp1, Dp2, stdout); exit(ret); } /* * Read into memory, a list of the honeypot addresses. * Use -Dhoney to print what was read. */ (void) read_honey(); if (isdebug(BUG_HONEY)) { (void) print_list("Honey Pot Addresses", HoneyHosts, stdout); return EX_OK; } /* * ??? Should the mx list be empty on our MX servers? */ if(mode != MODE_ADD_BY_HAND) { if (LocalHostName == NULL) { if (gethostname(buf, BUFSIZ) <0) milterr(Prog, __FILE__, __LINE__, FALSE, errno, "Define LocalHostName", "Get Host Name"); if (strchr(buf, '.') == NULL) milterr(Prog, __FILE__, __LINE__, FALSE, EINVAL, buf, "Not fully qualified"); MxHosts = getmx(buf, MxHosts); } else MxHosts = getmx(LocalHostName, MxHosts); } /* * This cannot be used for regression testing. But it * is a handy way to see how mx lookups are being done. */ if (isdebug(BUG_MX)) { if (xtest == NULL) { (void) print_list(LocalHostName, MxHosts, stdout); return EX_OK; } MxHosts = NULL; MxHosts = getmx(xtest, MxHosts); (void) print_list(xtest, MxHosts, stdout); return EX_OK; } if (mode == MODE_RUN_AS_MILTER) { if (smfi_register(SmfiDesc) == MI_FAILURE) { milterr(Prog, __FILE__, __LINE__, FALSE, errno, "ABORT", "Milter Listen failed"); } if (smfi_setconn(ListenPort) == MI_FAILURE) { milterr(Prog, __FILE__, __LINE__, FALSE, errno, "Start to listen", ListenPort); } /* * TODO -- add code to put into the background */ # if HAVE_SYSLOG if (DoLog == TRUE) syslog(LOG_INFO, "Version %s: starting up on socket %s", VERSION, ListenPort); # endif (void) smfi_main(); } else if(mode == MODE_ADD_BY_HAND) { slowedit(optind, argc, argv); } return EX_OK; }