CHANGES for vcp - Version CoPy 0.901 - Corrections & improvements to MANIFEST, MANIFEST.SKIP, Makefile.PL (patch from autrijus). - VCP::Source::parse_time() handles undef intermediate values more gracefully by zeroing them out. (patch from autrijus) - VCP::Driver::_run3() keeps it's hands off STDERR unless its redirecting STDERR. (patch from autrijus) - VCP::Utils::cvs only attempts to "cvs login" when using :pserver: and no password is found in the spec (an empty password is ok). (caught by autrijus) - VCP::Source tells VCP::Rev to clear the source out of its cache in order to allow the source instance to be DESTROYed and thus free up its working files. - VCP::Driver chdir()s to start_dir before blowing away working dir in order to prevent File::Path from complaining about not being able to find the current working directory. (Reported by knewt). - sdbm files' rowsize limit has been worked around. - VCPDEBUG=1 can be used while running test suite. 0.5-0.9 - Upgraded to new STML - UI now prompts in multiple choice as appropriate - Added DefaultFilters.pm, which loads in default filters if vcp's interactive user interface is used. These filters typically will be map filters or maybe stringedit filters for allowable character set issues. - Added handling of VCPP4LICENSE environment variable in Dest::p4.pm. If that's present and pointing to a readable file when a p4 daemon is started, a symlink will be created in the (possibly newly created) p4root directory to point to the p4 license file pointed to by VCPP4LICENSE. The 'make' target test_all_p4_versions will cycle through each version of p4 and p4d contained in the 'p4versions' directory, in both unlicensed and (if VCPP4LICENSE present) licensed mode. - VCP::Source::cvs creates multiple revisions for each source revision when the CVS source repository has multiple tags for a branch; this facilititates the creation of multiple identical branches in VCP::Dest::p4 in this case but confuses VCP::Dest::cvs (IOW CVS->CVS trasfers will not transfer these tags properly). - added test_all_p4_versions and related files to test all p4 versions found in subdirectory of the main project dir, 'p4versions'. Each directory there should be named like a p4 version string, and should contain a both p4 and p4d executables for that version. - remove --state-location switch add --db-dir and --repo-id switches build state location from concatenation of those two. - p4 tweaks the change specification of each submitted change to get the timestamp (Date:) and user id (User:) correct. - vcp can now --continue for incremental transfers. This will also allow resumption of interrupted transfers in some cases, but is not designed for that and does not handle a number of cases gracefully. - vcp no longer labels/tags each revision of each file in the destination repository with the rev_id or change_id that revision had in the source repository - VCP::Dest::branch_diagram now reports the action on each revision or whether the revision is a placeholder or base revision. - The special debug keyword "all" has been added to make every possible debugging statement fire. - Added state files. VCP now stores the state of each transfer so - it can tell what revisions from the source repository ended up as what revisions in the destination repository - it can tell where a transfer left off and --continue from there - incremental imports can remember the state of each file in the destination to avoid double-deleting or double-adding files. - there are uninstalled bin/dump_ utilities to allow the state files to be examined; at some point the VCP command should have a report mode to do some of this. - branch handling is now fully functional for p4 and cvs - cvs now does a better job of underscorifying tags - p4 now does a better job of underscorifying filenames - command line options parsing is now inherited in VCP::{Source,Dest}::* and shared options are parsed by base classes. - Added a source_repo_id to each revision, and repo_id to each Source and Dest. The repo_ids include repository type (cvs, p4, revml, vss, ...) and the repo_server fields. This is used to identify the source and destination of each transfer in the state file. - Added option to output revml without leading blanks - Added options to handle compressed revml input and output files - Add fields to vcp: source_name, source_filebranch_id, source_branch_id, source_rev_id, source_change_id Alter dtd, gentrevml, VCP source code, and test suite to accommodate new fields. - .vcp files may now take an Options: section. This is acted on before any other sections are parsed. - VCP::Filter::addlabels is now used to allow the user to configure in the addition of "rev_###" or "change_###" style labels. This is no longer done automatically by VCP::Dest::* for performance and configurability reasons. - Added VCPPROFILETIME environemnt variable. Iff this is true, add unix 'time' elapsed times to profile log. - Added profiling via VCPPROFILE environment variable. Setting this will log timing info anytime the 'profile' sub is called, or anytime 'run' or 'run_safely' is used to execute a sub-process. - VCP::Utils::cvs now supports "real" RCS tag validity checking and underscorification - VCP::Dest::cvs modifies a file's mtime if it hasn't changed since the cvs update -r that came before it (this is used when branching files; we fire files at cvs so fast that the mtimes collide). - Temporary directory creation in VCP::TestUtils now uses File::Temp and has more useful defaults for names so that temp dirs for testing are easier to work with and naming collisions avoided. - VCP::{Source,Dest}::p4 now supports a --run-p4d option - VCP::{Source,Dest}::p4 now hunt for unused ports when launching a p4d (increasing reliability) - VCP::{Source,Dest}::p4 now use the p4 info command to detect when the p4d is running (increasing speed and reliability compared to "sleep 1"). - revml sources now let you use wildcards to select a subset of the files: revml:/path/to/file.revml:.../wild*card/... - The test suite is now factored in to smaller chunks that allow shorter, faster testing of specific conversions, like t/95cvs2p4.t. - VCP::Dest::p4 can now create a repository, useful for testing and for conversions. See the --init-p4d and --delete-p4d-dir options of VCP::Dest::p4. - Added .vcp file and vcp: scheme support (NEEDS DOCS) - Major sort optimizations - VCP now uses a chain of plugins instead of just a source and a dest. - VCP::Source::cvs reads local repositories directly (speed, accuracy opt) use the --use-cvs option to defeat this in case there's a bug. - cleanup output of branch_diagram.pm - Added VCP::{Source,Dest}::null - reduced number of modules loadef by vcp help, vcp null: null: to speed test suite and make the command feel more responsive. - VCP::Dest::cvs now supports an --init-cvsroot option that, for local CVSROOT dirs only, convinces it to create and run cvs init in that directory if it doesn't already have any non-hidden files in it. - VCP::*::cvs now allow relative paths in their specs (but not in $ENV{CVSROOT}, that's too dangerous, I believe). - Started to use Test::Verbose, the =for test_scripts POD directives are to support that. - Various POD formatting fixes - p4 form parsing is improved, still needs to be made completely identical to real p4(1) forms lexing and parsing. - An undocumented "hires" timestamp may now be enabled by debugging the "hires" target: VCPDEBUG=.*,hires vcp ... - new RevML DTD to support branch maps - $self->$cmd(...) now takes an in_dir option that allows temporary overriding of the $self->command_chdir value. - started refactoring of test suites for faster, easier usage - The test suite now logs the commands it runs and times them. The times may be removed later, not sure. 0.4 - Branch support has been added to the VCP core and to VCP::*::{revml,cvs} and VCP::Source::p4 - source and destination spec parsing has been tweaked: the rev_root parsing now assumes that a path containing no wildcards and ending in something other than '/' or '\' is not part of the root, it is part of what's being moved. This is experimental: most users don't expect trailing '/' to be necessary. This should probably be determined by scanning the revs collected to see whether the spec refers to a directory or to a file, and there should be an error if a '/' is present after a what turns out to be a file. - CVS specs "cvs::pserver:....:foo" are now split in to 3 pieces, the scheme ("cvs:", ":pserver:....", and "foo"), with the middle part being the CVSROOT and the last part being the path within the repository. This is triggered by the double colon after the scheme name, which is odd but logically consistent: the first colon is the scheme end delimiter, the second is the first character in any CVSROOT remote server spec. If no double colon, then the string is parsed as before and the server portion of the spec becomes CVSROOT (this is for access to a local repository), but note that user name and password are ignored - VCP::Dest::cvs can now be handed a destination directory that does not exist and will call "cvs import" to create it. This is only done for the directory specified in the third part of the destination specification from the command line. - VCP::*::cvs no longer checks out the entire top level directory indicated by the first name in the destination spec. This space and time when dealing with small portions of a repository. - VCP::*::cvs will log in to remote repositories. NOTE: it cannot script this on all platforms, Win32 version of cvs.exe probably use direct BIOS calls to get the password. So VCP::*::cvs ignore all passwords for now :(. Once IPC::Run syncs with the new IO::Pty, I'll at least script them on Unixian OSes. NOTE 2: cvs documents that it will not prompt for a password if CVSROOT contains a password, but it still prompts for one here, and consideres the "user:password" string to be the user name. - VCP::Dest::branch_diagram is a new EXPERIMENTAL module. - bin/vcp now acts as a Unix filter for RevML again and understands ommited specs and "-" as a source / dest to make manhandling RevML files easier. VCP::*::revml emits useful messages if they can't be loaded in order to steer hapless users towards the help system if the XML modules needed aren't there. XML::Parser, for instance, isn't shipped with vcp.pl (the all-in-one script) due to the need for a C compiler. - VCP::*::cvs now normalizes the filespec so runs of '/' or of '\' are squashed to be single chars; cvs does not seem to treat '/' as idempotent on Unix. - Removed warts from RevML parser logic - Removed rev_count from the spec: it's not needed or used - Added / to the test suite - "make clean_tmp" now does rm -rf on /tmp/vcp*. This is useful after debugging with VCPNODELETE=1 - There's a new "metadata_only" attribute on all destinations so that branch_diagram.pm can say "hey, don't bother giving me any data". hmmm, could add that as an option for VCP::Dest::revml. 0.3 Fri May 24 15:05:25 EDT 2002 - VSS Support added - bin/vcp now errors out sooner on command line errors to avoid misconstruing poorly typed parameters early in @ARGV as errors in later parameters. Unkown schemes were proving troublesome. - VCP::Dest - "presort" sort key added. This must be the first sort key. It is on by default, and enables two-phased presort & merge strategy by default. This is engaged by using the sort key "presort" first in the sort spec. - avgcommenttime revision sort key to allow revs with the same timestamp to be sorted by the agv timestamps for the comments they bear, so as to group them with other revisions with the same comment before or after the current timestamp value. - if a field is present in only some revisions, it will usually be ignored in the sort spec (otherwise unstable sorts can result). These are called "sporadic" fields. This only affects sorting, not payload data. - Missing (undef) comment fields are now treated as "" for base revisions (which never have comments), to keep base revisions from causing comment fields to be sporadic. This only affects sorting, not payload data. - Missing (undef) time fields are now treated as 0 for base revisions (which never have comments), to keep base revisions from causing comment fields to be sporadic. This only affects sorting, not payload data. - Sort keys are no longer stored in the VCP::Rev; they need to be manipulated by VCP::Dest and I don't want to complicate VCP::Rev's internal-use-only metadata, so I removed it. - VCP::Dest::p4 - Doesn't error out when asked to delete an already-deleted file. This was happening due to Source::vss's need to always flag deleted files for incremental exports because it can't tell if a file was deleted before or since the beginning of the export. - VCP::Dest::revml - Allows several more output fields to be not-present, since VSS provides scarce metadata at times (especially for Delete operations). - VCP::Patch - Ignores lineends when checking to see if a patch is being applied to the appropriate file. - Some (all too verbose) debugging removed. - VCP::Plugin - Emits Win32-friendlt quotes ("" instead of '') when debugging commands. This allows debugging output to be copy-n-pasted to the command line. - Nascent support for a "stderr_filter" option when running commands. This is to make it easier to have per-command custom stderr filters. A fair amount of VSS code and perhaps some CVS code should be upgraded to use this instead of the current "save in a temp, set new, run command, restore temp" process. - VCP::Rev - Doesn't complain about undeleted files if $ENV{VCPNODELETE} - The SORT_KEY field is deprecated, will be removed soon. - base_revify() added so that Source::vss can parse the log entry for a base revision, then notice that it is a base revision and remove extraneous fields. - as_string(), which is used in a lot of debugging output, now prints out the first 32 characters of the comment field. This is invaluable when debugging without change numbers and rational (IMHO) rev_ids (as with VSS). - $ENV{VCPNODELETE} now prevents individual file deletes, too. - VCP::Source - handle time strings with single digits (xx/y/z) - Remove a Win32ism (.exe no longer needed on filename, IPC::Run is better about this now). - VCP::Utils::p4 - protect program exit when running a subprocess in an END block. - Remove a Win32ism (.exe no longer needed on filename, IPC::Run is better about this now). - Workaround intermittant corrupted output from p4 - Failure to delete the working client from the p4 repository is no longer fatal (why die() out of an end block and cause other cleanup not to occur). - Remove stray file (throwaway script) "beatonit" from MANIFEST. - revml.dtd - Allow VSS' almost metadataless s. 0.28 Tue Apr 30 15:57:57 EDT 2002 - VCP::Source::cvs allows the "-kb" (or "-k b") option now so that you can check out binary files. May want to add a pattern for this. - VCP::Source::cvs is now Win32 linends aware when parsing cvs' stdout - VCP::Source::cvs --rev-root now requires a string parameter, patch by Thomas Quinot . - avoid ^Z in testing text files on Win32 - Really require Regexp::Shellish 0.93 - Require IPC::Run 0.7 on Win32 for massive performance boost - Hack in "-kb" on VCP::Dest::cvs backfill checkouts to preserve \n-only line-ends on Win32. This probably needs to be generalized so that it can detect whether \n or \r\n is in the original file; the problem is that line-endedness is throwing off the digest check in VCP::Source::revml, since gentrevml creates all the files with \n. Because this is a testing issue so far, I want to wait until a Win32 user can help me figure out what the right thing to do here is. I may just have Source::* try the backfill again with a "flip linends flag" if it fails the first time. - - The test suite and VCP are now more enlightening when VCPNODELETE is set (this convinces them to keep all working dirs around to post-mortem failures). - dist/vcp.pl. a fat script was added to the repository, but not the tarball 0.27 (unreleased) - Win32 fixes to - gentrevml - VCP::TestUtils (these break the Unix test suite in a really minor way; the t/90p4.t and t/90cvs.t test scripts exit with a non-zero result code; need to fix that) - VCP::*::cvs, VCP::*::p4. - added "vcp html" to allow html documentation to be built. - Rewrote 'vcp help' so it has a p4-like index and can get at all of the module documentation (though internal-only stuff is not listed in the index, it can be reached). - VCP::Source::cvs: ignore waiting for and obtained lock messages. Suggested by Thomas Quinot - Added the VCPNODELETE option - VCP::Patch now closes it's patch file (this matters on Win32). - Added hexdump.pl, quite useful for looking in to problems involving lineends, embedded ^Z, and embedded NULL (\000) chars. - Added lib/VCP/License.pod - Added lib/VCP/Maintenance.pod - Added lib/VCP/Newlines.pod - Added lib/VCP/Process.pod - Rewrote vcp's POD - cleaned up various other POD - Simplified the and parsing; we no longer allow a ' ' after the ':' in the scheme:foo syntax. - vcp will no longer die if it can't delete a working file. - VCP::Plugin now has an extra call to cwd() to get p4 to act right; this needs to be cleaned up a bit by directly setting the environment (I think) - the test suite now skips all cvs-related tests if it can't find cvs. - Require Regexp::Shellish 0.93 so that --bootstrap can accept the "..." wildcard and be consistent with other wildcards. - Updated copyrights in many POD files. 0.26 Tue Dec 18 05:21:09 EST 2001 - switched to use Text::Diff, no more Unix diff dependency. Added VCP::DiffFormat. - Added VCP:Patch. No more unix patch dependency 0.25 - Switched to an all-perl Diff::Unified instead of exec()ing the systems' diff. This is for NT as well as to avoid tripping over old, featureless diffs (which hasn't yet occurred, but...) - Built framework for VCP::Patch, including test suite. - VCP::Dest::*::handle_footer() now handle things ok when no revisions are transferred. - VCP::Dest::p4 now backfills the base rev when receiving an incremental update from a source other than VCP::Source::revml. VCP::Source::revml reaches out and does the backfill itself; other sources don't, so VCP::Dest::p4 now does a sync (like a CVS checkout) and compares it to the version the source provides. TODO: Do the same for V::D::cvs. Reported by Jerry Harmon . - VCP::Dest::p4 now inits itself properly when backfilling - Fix a few Perl nits ("$foo\_" => "${foo}_..."), patch submitted by Peter Prymmer . - VCP::Source::p4 now uses p4's -x option when getting all of the files in each label; no more huge command lines for that purpose. - VCP::Source::cvs tries to include revisions that -rTAG misses. If a file has been added (or re-added) since the tag, "cvs log" will report all of it's revisions. VCP::Source::cvs throws away any outside of the date range of the files that were tagged. This is not perfect, but it had a bug and is now a little less imperfect. - Totally rewrite the sorting code, add --sort-by option for the revml destination so that the test suites can get vcp to generate .revml files in a sorted order matching that now generated by gentrevml (see below). This may seem trivial, but it's the only way to assure consistent output in test suites, which is a prerequisite for distributing this package. Could add it to other repositories, but not sure if that's needed, leaving it out for now to keep complexity and documentation simple and to reduce the number of features that future version might need to support for backcompat. Can add it in as soon as a real world need shows up. - Added sort keys for (perldoc VCP::Dest for details): - change_id (happens to do a segment-wise compare just in case...) - time - comment - rev_id (using a segment-wise compare) - name (using a segment-wise relative path compare) - The rev_id and change_id sort keys both have several synonyms to make them mnemonic to people who happen to think of them differently. The defaul sort keys are change_id, time, comment. comment is useful for breaking apart mass commits in to changes. - Debug and optimize VCP::Dest::cvs. `cvs commit` is very slow if files have been added or altered, so VCP::Dest::cvs now waits as long as possible before doing one. It still needs to commit before (and after) deletes, among other things. The result is a big speedup even on the test suite, which has a more abusive (more adds and deletes than normal) sequence of operations. - VCP::Dest::cvs now does not prematurely delete working files. This hints that VCP::Rev needs to not delete any file that is pointed to by another VCP::Rev instance, since VCP::Rev objects may not be DESTROYed quickly enough and may be deleting a newer version of a file they point to. - Add File::Temp to PREREQ_PM in Makefile.PL. Older Perls don't come with it. - VCP::Source::cvs: beginnings of support for --cd to bypass the automatic workspace and use a user-supplied workspace. - Converted t/50revml.t to use VCP::TestUtils - Add revision number to the default sort comparison in VCP::Dest, remove name - gentrevml now produces the test .revml files in name,rev_id order to make it easier for test scripts to compare them with the revml output generated during testing. - added t/01sort.t to test sorting - revamped t/90* and tweaked VCP::TestUtils to have slightly simpler p4 and cvs mgmt apis - added VCP::TestUtils::get_vcp_output to encapsulate the task of extracting revml files in gentrevml order. - Improved VCP::TestUtils::launch_p4d so it will hunt for a random numbered free port up to three times so that multiple test suites can be run at once. - Added VCP::Debug::explicitly_debugging() predicate to allow for low-priority but noisy debugging statements. This predicate returns true only if the current package (or keywords passed in) exactly equal one of the debugging specs. The more general predicage debugging() lets debugging specs be regexps, this one doesn't, meaning that you can sometimes get more detail by spelling out debugging specs instead of using that old standby ".*". TODO: note on the list of possible specs that VCP::Debug can generate which words this is enabled for. - minor code consistency cleanups, include rename a few $r vars to $rev. 0.222 Tue Jul 31 08:49:00 EDT 2001 - VCP::Dest::cvs now properly handles $r->comment being undef. This can occur when there is no comment in the source repo (as opposed to a comment of ''). VCP::Source::p4 leaves $r->comment as undef when it can't parse some non-space chars out of the depot, which is a bit obnoxious, but VCP::Dest::cvs should handle it anyway. 0.221 Tue Jul 31 00:24:31 EDT 2001 - The test suite now sets uid, euid, and the LOGNAME env. var. when run logged in as (or "su -"ed to) root to avoid the dreaded cvs error "cannot commit files as 'root'". This imposes an unfortunate order on the non-cvs test suites in that cvs must be initted before any other repositories, since it changes uid and euid. If the other repos were initted before setting the uid and euid, then they might not have permission to access the files in question. NOTE: the only reason we have to set the uid is to keep perl from whining about -I when running setuid. I think cvs would be happy if we just tweaked euid, since that's all it checks. - The test suite now uses temporary dirs starting with "vcp$$\_" (eg "vcp2132_cvs_cvswork") to hold the repositories and workspaces needed. This makes it more obvious that they were created by vcp, in the event that something bombs out and they don't get cleaned up. - vcp now cleans up after itself a little better: the /tmp/vcp234 directories (which look like but are not related to the ones mentioned above used by the test suite) are now deleted when vcp exits normally. 0.22 - Sun Jul 22 23:52:46 EDT 2001 - VCP::Source::p4 now uses VCP::Utils::p4::parse_p4_repo_spec(). No functionality changes. - Created VCP::Utils::cvs to enable... - ...VCP::Source::cvs now checks out the appropriate module so the user does not need to have a checked-out version. - VCP::Dest::cvs no longer offers the --rev-root option, or any options at all for that matter. - The scheme and filespec are now stored in VCP::Plugin by VCP::Plugin::parse_repo_spec(), for ease of access and consistency. - Got rid of the overly funky VCP::Plugin::AUTOLOAD(). This used to emulate a class method that would run an external program of the same name as the method after that name was registered with the VCP::Plugin instance. Too baroque, now the VCP::Utils::foo classes provide however many invocation methods are needed to both VCP::Source::foo and VCP::Dest::foo. 0.21 - Fri Jul 20 23:08:43 EDT 2001 - Fixed VCP::Dest::p4; it was adding too many directories to a file, so files ended up with the first directory or two repeated. reported by david d zuhn - Cleaned up undefined var use in VCP::Utils::p4, reported by david d zuhn - Fixed VCP::Dest::revml's decision making so it will choose base64 encoding when faced with lots of NULs on input. Reported by david d zuhn . - Added a couple of compression thoughts for revml output to TODO. - Reworked VCP::Dest::revml's base64 encoding logic to be more efficient in time and in generated output. - Changed the test suite to use base64 for the "binary" file, and to use character codes from 0x00 to 0x07 in rotation to make sure binary data goes through ok. - refactored 90p4.t and 90cvs.t into VCP::TestUtils to make test maint. easier. Now you don't have to be clinically insane to work on the test suite. At least not all the time. - Added p4->revml, cvs->revml, cvs->p4->revml tests for the re-rooting feature. 0.2 - Thu Jul 19 00:18:34 EDT 2001 - *** VCP::Dest::p4 now uses a depot spec (//depot/...) instead of a file spec on the local filesystem. This differs from VCP::Source::p4 until I can upgrade it. The p4 where command is no longer used. - *** VCP::Dest::p4 now uses it's own client view pointing in to the temp directory. This should solve the link() failures when going from cvs to p4, since VCP::Source::cvs and VCP::Dest::p4 will both use the same temp dir. This should also make normal usage a bit easier, since the user need not create a client spec, etc. - Altered labelsync to use p4's "-x -", now the huge lists of labelled files that david d zuhn 's CVS repository has are passed to p4 on stdin instead of blowing up the command line. - VCP::Dest::p4 now passes absolute paths to the working files to p4 labelsync instead of paths relative to rev_root. Reported by david d zuhn . - Remove -f (force_missing) option from VCP::Source::cvs. It is now the default behavior. If need be, we can add an option to not force_missing in case extraneous files get brought along, but we'll wait for user demand. - Tweak deduce_rev_root algorithm to take the entire path given if no wildcards are present. - Added debug logging of command-line options, which is helpful when vcp is run by a script, such as our test scripts. Use the VCPDEBUG environment variable to enable this, set it to something like ".*" or "main". - Fixed documentation for --debug (the spec is required and it's not a shellish re, it's a perl5 re). - Fixed docs and comments for VCP::Source::cvs's -d options (was -D) - Deprecated the wacky VCP::Plugin::AUTOLOAD which was used to make things like $self->p4( [ options ], redirects ) work. So far, only VCP::Dest::p4 uses the new VCP::Plugin::run_safely() API, but the others will be upgraded. - Added a VCP::Utils::p4 to contain code that is used by VCP::Dest::p4 and which will soon be used by VCP::Source::p4. Expect a VCP::Utils::cvs to come along, too. 0.1 Wed Jul 4 00:27:35 EDT 2001 - Fix VCP::Dest::p4 to take the filespec from the p4: spec and use it as the rev_root. No --rev-root option at this time, not sure if it's needed. Reported by david d zuhn . 0.091 Thu Jun 7 08:32:15 EDT 2001 - Fix bug in CVS log file parsing that was causing it to think it was seeing all revisions as revisions of the first file it saw ("====... lines were being ignored) as the first file. Reported by Matthew Attaway. 0.09 Thu May 24 17:15:38 EDT 2001 - Debugged and beefed up the CVS log file parsing code. It can still be fooled by revision comments (the "message" field) things that mimic the output of `cvs log`, like a line beginning with the right number of "-" characters, but it's more robust. - Underscorify CVS tags. Reported by Matthew Attaway. - Only warn about undeleted files when in debugging mode, also reported by Matthew Attaway. The warning's there because we don't want to use too much disk space, but it gets in the way when an exception is thrown, since the END {...} handlers kick in before some (often many) the VCP::Rev objects are DESTROYed. 0.08 Wed May 23 10:18:28 EDT 2001 - Stop using p4 print -s, it puts a newline in every 4097 characters. Reported by Nick Ing-Simmons. - Require p4d >= 99.2 because we need filelog's -m option. Reported by Nick Ing-Simmons. Updated t/90cvs.t, t/90p4.t, and lib/VCP/TestUtils.pm to improve detection of stale p4ds. - Fix a "use strict" problem in lib/VCP/TestUtils.pm, reported by Nick Ing-Simmons. 0.07 Tue May 22 16:07:48 EDT 2001 - Minnor documentation changes. 0.066 Mon May 21 10:34:50 EDT 2001 - Remove PWD from the environment when calling the p4 command, so as to force it to use the cwd() - Improve logging of the directory the p4 command (and all commands) are being run in. - Many thanks to Matthew Attaway for help in finding and testing this one. 0.064 Tue May 8 11:26:11 EDT 2001 - Some versions of patch have problems handling embedded NUL (\0x00) characters. Fixed gentrevml and VCP::Dest::revml to not generate deltas for files containing them. If a file contains a NUL, it will sent in it's entirety, though it might or might not be base64 encoded. 0.063 Tue Apr 24 23:57:28 EDT 2001 - Fixed bug in parsing of repo specs (scheme:user:passwd@server:files) 0.062 Tue Apr 17 14:07:48 EDT 2001 - Added the requirement to install expat first to INSTALL - Commented out the call to "vcp help" to prevent perldoc from whining when run as root. Notified Brad Appleton, Pod::Usage's maintainer to see what might be done, but it's not a big deal for me unless an actual, real live user runs "vcp help" when logged in as root. - Converted shift to be CORE::shift in VCP::Revs, sinne perl 5.6.1 now complains that it had to resolve shift as CORE::shift due to the sub shift in there. 0.061 Sun Apr 15 15:56:32 EDT 2001 - Removed a couple of 5.6.0 dependancies - require perl 5.00503 in Makefile.PL, not sure how far back we could easily go. - Added logic to t/*.t to set -I more robustly by calling File::Spec->abs2rel on @INC and the path to bin/vcp and pass them on to child perls, so they could find their libraries. This fixed a nasty chicken-and-egg problem whereby you could only run the tests after installing. - t/90cvs.t and t/90p4.t use File::Spec->tmpdir for the repositories and workspaces they build. They also delete these temp dirs when done. - Made Makefile.PL require a minimum of XML::AutoWriter v.036 0.06 Wed Dec 20 23:19:15 EST 2000 - bin/vcp: Added --versions, which loads all modules and checks them for a $VERSION and print the results out. This should help with diagnosing out-of-sync modules. - Added $VERSION vars to a few modules :-). Forgot to increment any $VERSION strings. - VCP::Dest::cvs: The directory "deeply" was not being `cvs add`ed on paths like "a/deeply/nested/file", assuming "deeply" had no files in it. - VCP::Dest::revml: fixed a bug that was causing files with a lot of linefeeds to be emitted in base64 instead of deltaed. This means most text files. - Various minor cleanups of diagnostics and error messages, including exposing "Can't locate Foo.pm" when a VCP::Source or VCP::Dest module depends on a module that's not installed, as reported by Jeff Anton. 0.05 Mon Dec 18 07:27:53 EST 2000 - Use `p4 labels //...@label` command as per Rober Cowham's suggestion, with the '-s' flag recommended by Christopher Siewald and Amaury.FORGEOTDARC@atsm.fr. Though it's actually something like vcp: running /usr/bin/p4 -u safari -c safari -p localhost:5666 -s files //.../NtLkly //...@compiler_a3 //.../NtLkly //...@compiler_may3 and so //on //for 50 parameters to get the speed up. I use the //.../NtLkly "file" as //a separator between the lists of files in various //revisions. Hope nobody has any files named that :-). What I should do is choose a random label that doesn't occur in the labels list, I guess. - VCP::Source::revml and VCP::Dest::revml are now binary, control code, and "hibit ASCII" (I know, that's an oxymoron) clean. The , , and elements now escape anything other than tab, line feed, space, or printable chars (32 <= c <= ASCII 126) using a tag like ''. The test suite tests all this. Filenames should also be escaped this way, but I didn't get to that. - The decision whether to do deltas or encode the content in base64 is now based on how many characters would need to be escaped. - We now depend on the users' diff program to have a "-a" option to force it to diff even if the files look binary to it. I need to use Diff.pm and adapt it for use on binary data. - VCP::Dest::cvs now makes sure that no two consecutive revisions of the same file have the same mod_time. VCP::Source::p4 got so fast at pulling revisions from the repositories the test suite sets up that CVS was not noticing that files had changed. - VCP::Plugin now allows you to set a list of acceptable result codes, since we now use p4 in ways that make it return non-zero result codes. - VCP::Revs now croaks if you try to add two entries of the same VCP::Rev (ie matching filename and rev_id). - The tag is now limited to "text" or "binary", and is meant to pass that level of info between foreign repositories. - The on each file now carries the one line p4 description of the file so that p4->p4 transferes can pick out the more detailed info. VCP::Source::p4, VCP::Dest::p4 do this. - VCP::{Source,Dest}::{p4,cvs} now set binaryness on added files properly, I think. For p4->p4, the native p4 type is preserved. For CVS sources, seeing the keyword substitution flag 'o' or 'b' implies binaryness, for p4, seeing a filetype like qr/u?x?binary/ or qr/x?tempobj/ or "resource" implies binaryness (to non-p4 destinations). NOTE: Seeing a 'o' or 'b' in a CVS source only ends up setting the 'b' option on the destination. That should be ok for most uses, but we can make it smarter for cvs->cvs transfers if need be. 0.04 Tue Dec 12 00:15:57 EST 2000 - Reorg of VCP::Source::p4 - One large filelog command is run instead of many small ones. This takes advantage of the -m option to make sure enough changes are listed. Many extra revisions of most files are probably listed, but listing and ignoring them is quicker than spawning p4 over and over. Wish p4 filelog had a revision range... - it now doesn't suck the entire filelog output in to memory, it parses it line by line as it's emitted from the `p4 filelog` - `p4 print` is now used to print a bunch of files at once, using the header line to separate one file from the next, kind of like splitting a mime-encoded message. There's a very slight chance that it will misjudge the boundary between two files if a file happens to have a line that looks very much like the header line for the next file. This is pretty unlikely and I'll fix it if it crops up. I could batch them more, right now it never puts two revisions of the same filename in the same batch, for no really good reason. Another method might be to batch 25 or 50 revs each time. - it turns out there's a problem spawning multiple p4 commands at the same time against the same p4d (p4d is 99.2, FWIW). Or at least running large `p4 files ...` while there's a large `p4 filelog` still also running. - filelog lines beginning with "... ..." are now ignored. These are notifications of copy, branch, and integrate events that we don't yet do anything with. - deleted cur() and P4_CUR - deleted P4_IS_INCREMENTAL - Made an assertion in VCP::Dest::revml::handle_rev() a little clearer - Added some ok(1) calls to 90p4.t to make it easier to figure out which child process is whining or aborting - Made the message that's printed when a subcommand emits unexpected output say "stderr" instead of "stdout". - Cleaned up documentation for VC::Plugin::work_path(). 0.03 Sun Dec 10 13:14:07 EST 2000 - Cleaned up VCP::Source::p4 a bit. It doesn't whine as much now when it sees what it considers to be old news in the log file. - Added an easy way to monitor the commands being issued to a repository: simply add "::cmd" to the debug spec for that source: vcp -d Source::cvs::cvs vcp -d Dest::p4::p4 - The next step is to use the -m option to p4 filelog to speed things up. 0.02 Tue Dec 5 01:20:31 EST 2000 - VCP::Dest::p4 now does change number aggregation based on the comment field changing or whenever a new revision of a file with unsubmitted changes shows up on the input stream. Since revisions of files are normally sorted in time order, this should work in a number of cases. I'm sure we'll need to generalize it, perhaps with a time thresholding function. - t/90cvs.t now tests cvs->p4 replication. - VCP::Dest::p4 now doesn't try to `p4 submit` when no changes are pending. - VCP::Rev now prevents the same label from being applied twice to a revision. This was occuring because the "r_1"-style label that gets added to a target revision by VCP::Dest::p4 could duplicate a label "r_1" that happened to already be on a revision. - Added t/00rev.t, the beginnings of a test suite for VCP::Rev. - Tweaked bin/gentrevml to comment revisions with their change number instead of using a unique comment for every revision for non-p4 t/test-*-in-0.revml files. This was necessary to test cvs->p4 functionality. 0.01 Sat Dec 2 23:10:43 EST 2000 - First public release. Moderately functional alpha code. Supports p4, cvs, RevML. Expect APIs, UIs and enerthing else to change before things settle down.