package VCP::TestUtils ; =head1 NAME VCP::TestUtils - support routines for VCP testing =cut use Exporter ; @EXPORT = qw( assert_eq slurp mk_tmp_dir perl_cmd vcp_cmd get_vcp_output p4d_borken launch_p4d cvs_borken cvs_options init_cvs s_content rm_elts ) ; @ISA = qw( Exporter ) ; use strict ; use Carp ; use Cwd ; use File::Path ; use File::Spec ; use IPC::Run qw( run start kill_kill ) ; use POSIX ':sys_wait_h' ; use Text::Diff ; =head1 General utility functions =over =item mk_tmp_dir Creates one or more temporary directories, which will be removed upon exit in an END block =cut { my @tmp_dirs ; END { rmtree \@tmp_dirs unless $ENV{VCPNODELETE} } sub mk_tmp_dir { confess "undef!!!" if grep !defined, @_ ; rmtree \@_ ; mkpath \@_, 0, 0770 ; push @tmp_dirs, @_ ; } } =item assert_eq assert_eq $test_name, $in, $out ; dies with a useful diff in $@ is $in ne $out. Returns nothing. Requires a diff that knows about the -d and -U options. =cut sub assert_eq { my ( $name, $in, $out ) = @_ ; ## Doint this because Test::Differences isn't quite "real" yet... die diff \$in, \$out, { CONTEXT => 10 } if $in ne $out ; } =item slurp $guts = slurp $filename ; =cut sub slurp { my ( $fn ) = @_ ; open F, "<$fn" or die "$!: $fn" ; binmode F ; local $/ ; return ; } =item perl_cmd @perl = perl_cmd Returns a list containing the Perl executable and some options to reproduce the current Perl options , like -I. =cut sub perl_cmd { my %seen ; return ( $^X, ( map { my $s = $_ ; $s = File::Spec->rel2abs( $_ ) ; "-I$s" ; } grep ! $seen{$_}++, @INC ) ) ; } =item vcp_cmd @vcp = vcp_cmd Returns a list containing the Perl executable and some options to reproduce the current Perl options , like -I. vcp_cmd assumes it is called from within the main distro directory or one subdir under it, since it looks for "bin/vcp" and "../bin/vcp". This should be adequate for almost all uses. vcp_cmd caches it's results to allow it to be run from other directories after the first time it's called. (this is not a significant performance improvement; running the vcp process takes several orders of magnitude longer than the quick checks vcp_cmd does). =cut my @vcp_cmd ; sub vcp_cmd { unless ( @vcp_cmd ) { ## We always run vcp by doing a @perl, vcp, to make sure that vcp runs under ## the same version of perl that we are running under. my $vcp = 'vcp' ; $vcp = "bin/$vcp" if -e "bin/$vcp" ; $vcp = "../bin/$vcp" if -e "../bin/$vcp" ; $vcp = File::Spec->rel2abs( $vcp ) ; @vcp_cmd = ( perl_cmd, $vcp ) ; } return @vcp_cmd ; } =item get_vcp_output @vcp = get_vcp_output "foo:", "-bar" ; Does a: run [ vcp_cmd, @_, "revml:", ... ], \undef, \$out or croak "`vcp blahdy blah` returned $?"; and returns $out. The "..." refers to whatever output options are needed to make the test output agree with C's test files (t/test-*.revml). =cut sub get_vcp_output { my $out ; my @args = ( @_, "revml:", "--sort-by=name,rev_id" ) ; run [ vcp_cmd, @args ], \undef, \$out or croak "`vcp ", join( " ", @_ ), " returned $?\n" ; return $out ; } =cut sub vcp_cmd { ## We always run vcp by doing a @perl, vcp, to make sure that vcp runs under ## the same version of perl that we are running under. my $vcp = 'vcp' ; $vcp = "bin/$vcp" if -x "bin/$vcp" ; $vcp = "../bin/$vcp" if -x "../bin/$vcp" ; $vcp = File::Spec->rel2abs( $vcp ) ; return ( perl_cmd, $vcp ) ; } =back =head1 XML "cleanup" functions These are used to get rid of content or elements that are known to differ when comparing the revml fed in to a repository with the revml that comes out. =over =item s_content s_content $elt_type1, $elt_type2, ..., \$string1, \$string2, ..., $new_content ; Changes the contents of the elements, since some things, like suer id or mod_time can't be the same after going through a repository. If $new_val is not supplied, a constant string is used. =cut sub s_content { my $new_val = pop if @_ && ! ref $_[-1] ; $new_val = "" unless defined $new_val ; my $elt_type_re = do { my @a ; push @a, quotemeta shift while @_ && ! ref $_[0] ; join "|", @a ; } ; $$_ =~ s{(<($elt_type_re)[^>]*?>).*?()} {$1$new_val$3}sg for @_ ; $$_ =~ s{(<($elt_type_re)[^>]*?>).*?()}{$1$new_val$3}sg for @_ ; } =item rm_elts rm_elts $elt_type1, $elt_type2, ..., \$string1, \$string2 rm_elts $elt_type1, $elt_type2, ..., qr/$content_re/, \$string1, \$string2 Removes the specified elements from the strings, including leading whitespace and trailing line separators. If the optional $content_re regular expression is provided, then only elements containing that pattern will be removed. =cut sub rm_elts { my $elt_type_re = do { my @a ; push @a, quotemeta shift while @_ && ! ref $_[0] ; join "|", @a ; } ; my $content_re = @_ && ref $_[0] eq "Regexp" ? shift : qr/.*?/s ; my $re = qr{^\s*<($elt_type_re)[^>]*?>$content_re\r?\n}sm ; $$_ =~ s{$re}{}g for @_ ; } =head1 p4 repository mgmt functions =over =item p4_borken Returns true if the p4 is missing or too old (< 99.2). =cut sub p4d_borken { my $p4dV = `p4d -V` || 0 ; return "p4d not found" unless $p4dV ; my ( $p4d_version ) = $p4dV =~ m{^Rev[^/]*/[^/]*/([^/]*)}m ; my $min_version = 99.2 ; return "p4d version too old, need at least $min_version" unless $p4d_version >= $min_version ; return "" ; } =item launch_p4d launch_p4d "prefix_" ; Creates an empty repository and launches a p4d for it. The p4d will be killed and it's repository deleted on exit. Returns the options needed to access the repository. =cut #sub launch_p4d { # my $prefix = shift || "" ; # # { # my $borken = p4d_borken ; # croak $borken if $borken ; # } # # my $tmp = File::Spec->tmpdir ; # my $repo = File::Spec->catdir( $tmp, "vcp${$}_${prefix}p4repo" ) ; # mk_tmp_dir $repo ; # # ## Ok, this is wierd: we need to fork & run p4d in foreground mode so that # ## we can capture it's PID and kill it later. There doesn't seem to be # ## the equivalent of a 'p4d.pid' file. If we let it daemonize, then I # ## don't know how to get it's PID. # # my $port ; # my $p4d_pid ; # my $tries ; # while () { # ## 30_000 is because I vaguely recall some TCP stack that had problems # ## with listening on really high ports. 2048 is because I vaguely recall # ## that some OS required root privs up to 2047 instead of 1023. # $port = ( rand( 65536 ) % 30_000 ) + 2048 ; # my @p4d = ( 'p4d', '-f', '-r', $repo, '-p', $port ) ; # print "# Running ", join( " ", @p4d ), "\n" ; # $p4d_pid = fork ; # unless ( $p4d_pid ) { # ## Ok, there's a tiny chance that this will fail due to a port # ## collision. Oh, well. # exec @p4d ; # die "$!: p4d" ; # } # sleep 1 ; # ## Wait for p4d to start. 'twould be better to wait for P4PORT to # ## be seen. # select( undef, undef, undef, 0.250 ) ; # # last if kill 0, $p4d_pid ; # die "p4d failed to start after $tries tries, aborting\n" # if ++$tries >= 3 ; # warn "p4d failed to start, retrying\n" ; # } # # END { # return unless defined $p4d_pid ; # kill 'INT', $p4d_pid or die "$! $p4d_pid" ; # my $t0 = time ; # my $dead_child ; # while ( $t0 + 15 > time ) { # select undef, undef, undef, 0.250 ; # $dead_child = waitpid $p4d_pid, WNOHANG ; # warn "$!: $p4d_pid" if $dead_child == -1 ; # last if $dead_child ; # } # unless ( defined $dead_child && $dead_child > 0 ) { # print "terminating $p4d_pid\n" ; # kill 'TERM', $p4d_pid or die "$! $p4d_pid" ; # $t0 = time ; # while ( $t0 + 15 > time ) { # select undef, undef, undef, 0.250 ; # $dead_child = waitpid $p4d_pid, WNOHANG ; # warn "$!: $p4d_pid" if $dead_child == -1 ; # last if $dead_child ; # } # } # unless ( defined $dead_child && $dead_child > 0 ) { # print "killing $p4d_pid\n" ; # kill 'KILL', $p4d_pid or die "$! $p4d_pid" ; # } # } # # return { # user => "${prefix}t_user", # port => $port, # } ; #} sub launch_p4d { my $prefix = shift || "" ; { my $borken = p4d_borken ; croak $borken if $borken ; } my $tmp = File::Spec->tmpdir ; my $repo = File::Spec->catdir( $tmp, "vcp${$}_${prefix}p4repo" ) ; mk_tmp_dir $repo ; ## Ok, this is wierd: we need to fork & run p4d in foreground mode so that ## we can capture it's PID and kill it later. There doesn't seem to be ## the equivalent of a 'p4d.pid' file. If we let it daemonize, then I ## don't know how to get it's PID. my $port ; my $tries ; my $h ; while () { ## 30_000 is because I vaguely recall some TCP stack that had problems ## with listening on really high ports. 2048 is because I vaguely recall ## that some OS required root privs up to 2047 instead of 1023. $port = ( rand( 65536 ) % 30_000 ) + 2048 ; my @p4d = ( $^O !~ /Win32/ ? "p4d" : "p4d.exe", "-f", "-r", $repo, "-p", $port ) ; print "# Running ", join( " ", @p4d ), "\n" ; $h = start \@p4d ; ## Wait for p4d to start. 'twould be better to wait for P4PORT to ## be seen. sleep 1 ; ## The child process will have died if the port is taken or due ## to other errors. last if $h->pumpable; finish $h; die "p4d failed to start after $tries tries, aborting\n" if ++$tries >= 3 ; warn "p4d failed to start, retrying\n" ; } END { return unless $h; $h->kill_kill; $? = 0; ## p4d exits with a "15", which becomes our exit code ## if we don't clear this. } return { user => "${prefix}t_user", port => $port, } ; } =back =head1 CVS mgmt functions =over =item cvs_borken Returns true if the cvs is missing or too old (< 99.2). =cut sub cvs_borken { my $cvsV = `cvs -v` || 0 ; return "cvs command not found" unless $cvsV ; return "cvs command does not appear to be for CVS: '$cvsV'" unless $cvsV =~ /Concurrent Versions System/; return "" ; } =item init_cvs my $cvs_options = init_cvs $prefix, $module_name ; Creates a CVS repository containing an empty module. Also sets $ENV{LOGNAME} if it notices that we're running as root, so CVS won't give a "cannot commit files as 'root'" error. Tries "nobody", then "guest". Returns the options needed to access the cvs repository. =cut sub init_cvs { my ( $prefix , $module ) = @_ ; my $tmp = File::Spec->tmpdir ; my $options = { repo => File::Spec->catdir( $tmp, "vcp${$}_${prefix}cvsroot" ), work => File::Spec->catdir( $tmp, "vcp${$}_${prefix}cvswork" ), } ; my $cwd = cwd ; ## Give vcp ... cvs:... a repository to work with. Note that it does not ## use $cvswork, just this test script does. $ENV{CVSROOT} = $options->{repo} ; ## CVS does not like root to commit files. So, try to fool it. ## CVS calls geteuid() to determine rootness (so does perl's $>). ## If root, CVS calls getlogin() first, then checks the LOGNAME and USER ## environment vars. ## ## What this means is: if the user is actually logged in on a physical ## terminal as 'root', getlogin() will return "root" to cvs and we can't ## fool CVS. ## ## However, if they've used "su", a very common occurence, then getlogin() ## will return failure (NULL in C, undef in Perl) and we can spoof CVS ## using $ENV{LOGNAME}. if ( ! $> && $^O !~ /Win32/ ) { my $login = getlogin ; if ( ( ! defined $login || ! getpwnam $login ) && ( ! exists $ENV{LOGNAME} || ! getpwnam $ENV{LOGNAME} ) ) { for ( qw( nobody guest ) ) { my $uid = getpwnam $_ ; next unless defined $uid ; ( $ENV{LOGNAME}, $> ) = ( $_, $uid ) ; last ; } ## Must set uid, too, to keep perl (and thus vcp) from bombing ## out when running setuid and given a -I option. This happens ## a lot in the test suite, since the tests often call vcp ## using "perl", "-Iblib/lib", "bin/vcp", ... to recreate the ## appropriate operating environment for Perl. If this becomes ## a problem, perhaps we can hack in a "run as user" option to ## VCP::Utils::cvs so that only the cvs subcommands are run ## setuid, or perhaps we can avoid passing "-I" to the perls. $< = $> ; warn "# Setting real & eff. uids=", $>, "(", $ENV{LOGNAME}, qq{) to quell "cvs: cannot commit files as 'root'"\n} ; } } mk_tmp_dir $options->{repo} ; run [ qw( cvs init ) ] or die "cvs init failed" ; mk_tmp_dir $options->{work} ; chdir $options->{work} or die "$!: $options->{work}" ; mkdir $module, 0770 or die "$!: $module" ; chdir $module or die "$!: $module" ; run [ qw( cvs import -m ), "$module import", $module, "${module}_vendor", "${module}_release" ] or die "cvs import failed" ; chdir $cwd or die "$!: $cwd" ; delete $ENV{CVSROOT} ; # chdir ".." or die "$! .." ; # # system qw( cvs checkout CVSROOT/modules ) and die "cvs checkout failed" ; # # open MODULES, ">>CVSROOT/modules" or die "$!: CVSROOT/modules" ; # print MODULES "\n$module $module/\n" or die "$!: CVSROOT/modules" ; # close MODULES or die "$!: CVSROOT/modules" ; # # system qw( cvs commit -m foo CVSROOT/modules ) # and die "cvs commit failed" ; return $options ; } =head1 COPYRIGHT Copyright 2000, Perforce Software, Inc. All Rights Reserved. This module and the VCP package are licensed according to the terms given in the file LICENSE accompanying this distribution, a copy of which is included in L. =cut 1 ;