# This is a master configuration ini file for SDP - Server Deployment Package # It is parsed by a python script and used to write the basic sdp_config.ini files # which can be parsed by parse_config_ini.bat (called by p4env.bat) # # See below for naming conventions regarding Section names. # The default section contains global values which are used in other sections (unless overridden # in those sections) [DEFAULT] # This is the Perforce superuser for this instance SDP_P4SUPERUSER=perforce # This is the Perforce superuser password - will be written to the adminpass.txt file SDP_P4SUPERUSER_PASSWORD=perforce # The following file should contain the password for the perforce user - it is stored in scripts dir ADMIN_PASS_FILENAME=adminpass.txt # The following define email addresses for sending of automated reports via SMTP mailfrom=perforce@example.com # maillist specifies who emails are sent to, and can take multiple comma separated values maillist=p4ra@example.com # mailhost is typically in the local network to avoid open relay issues mailhost=mail.example.com # mailhostport will default to 25. For use with gmail value is 587 (in which case SSL will be turned on) mailhostport=25 # The following file should contain the password for loggin in to the mailhost - if required - can be left blank if not needed EMAIL_PASS_FILENAME=emailpass.txt # python used for trigger and other scripts - make sure appropriate version specified here. PYTHON=C:\Python27\python.exe # Set KEEPCKPS to the number of checkpoint & journal files and their # corresponding log files to keep. Checkpoints and their log file are # numbered with the same journal counter number. Checkpoints/journals # and their logs are removed when daily_backup.bat or weekly_backup.bat # are run. The live_checkpoint.bat script does not remove. # Set KEEPCKPS=0 to avoid automated cleanup of checkpoints and logs. KEEPCKPS=10 # Set KEEPLOGS to the number of server logs to keep, counting back from # the most recent. Server logs are numbered with their corresponding # journal counter number, since server logs are rotated when checkpoint # logs are rotated. Keep in mind that if scripts are set to run # more than once per day, this will not correspond to the number # of days, just the number of iterations of script calls. # KEEPLOGS affects all log files other than checkpoint logs, which are # governed by KEEPCKPS. # Set KEEPLOGS=0 to avoid automated cleanup of old server logs. KEEPLOGS=20 # If LIMIT_ONE_DAILY_CHECKPOINT is set, daily_backup.bat will create # no more than one offline checkpoint per day, regardless of the # number of times it is called. It may be desirable to run the # daily_backup.bat script multiple times per day to get the benefit # of doing 'p4d -jj', creating more frequent journal files for the # DR site, without unduly taxing the primary server hardware by making # more than one full offline checkpoint per day. Setting # LIMIT_ONE_DAILY_CHECKPOINT does *not* affect live_checkpoint.bat; it # will always create a full checkpoint. However, if live_checkpoint.bat # is run, setting LIMIT_ONE_DAILY_CHECKPOINT will prevent subsequent # runs of daily_backup.bat from creating additional checkpoints. LIMIT_ONE_DAILY_CHECKPOINT=false # Global root drive/directory - this directory will contain links (using 'mklink') to # other drives/directories on the machine (e.g. under METADATA_ROOT). # The default value is "c:" and implies c:\p4 is used as standard root. # Don't change without good reason - for consistency between sites! # Use the METADATA_ROOT and other variables to put real directories (not links) on different disks. SDP_GLOBAL_ROOT=c: # ------------------------------------------------------------------------------ # Note that the name of the section is of the format [<sdp_instance>:<hostname>] # Use the output of "hostname" command (not IP address) for the hostname part. # Each SDP_INSTANCE must be unique on a particular host machine # This allows for the same instance number to be used on different hosts (e.g. a master and # a replica). You may also wish to use alphabetic values for sdp_instance, e.g. MASTER and REPLICA1 # The SDP_INSTANCE will become part of the service name and also directory structure # E.g. p4_<SDP_INSTANCE> so p4_1 or p4_Master # c:\p4\<SDP_INSTANCE> so c:\p4\1 or c:\p4\Master [1:__OUTPUT_OF_HOSTNAME_COMMAND_ON_SERVER_PLEASE_UPDATE__] # The name of this instance also used as the serverid - it can be the same as SDP_INSTANCE, though typically # isn't if SDP_INSTANCE is just numeric. # SDP_SERVERID must be unique for all servers with the same master (standard) server. SDP_SERVERID=Master # The value of the Services field in "p4 server", one of: standard, replica, forwarding-replica, build-server SDP_SERVICE_TYPE=standard # The port number - must be numeric SDP_P4PORT_NUMBER=1777 # Service user not required on a Master (standard) server SDP_P4SERVICEUSER= # These next 3 are the root drive/directory values # Often these are separate drives, but they can be on the same drive and all be the # same value (note that the first directory underneath with be "p4". # Examples: # METADATA_ROOT=E: # METADATA_ROOT=C:\p4assets METADATA_ROOT=E: DEPOTDATA_ROOT=F: LOGDATA_ROOT=G: # The following are not required for master servers or where there is no replica. # This is used by replicas to access the root directory of DEPOTDATA_ROOT above. REMOTE_DEPOTDATA_ROOT= # ------------------------------------------------------------------ # Remove this section if no replica is used. # Note that the name of the section is of the format [<sdp_instance>:<hostname>] # Use the output of "hostname" command (not IP address) for the hostname part. # Each SDP_INSTANCE must be unique on a particular host machine # This allows for the same instance number to be used on different hosts (e.g. a master and # a replica). You may also wish to use alphabetic values for sdp_instance, e.g. MASTER and REPLICA1 # The SDP_INSTANCE will become part of the service name and also directory structure # E.g. p4_<SDP_INSTANCE> so p4_1 or p4_Master # c:\p4\<SDP_INSTANCE> so c:\p4\1 or c:\p4\Master [Replica1:__OUTPUT_OF_HOSTNAME_COMMAND_ON_SERVER_PLEASE_UPDATE__] # The name of this instance also used as the serverid - it can be the same as SDP_INSTANCE, though typically # isn't if SDP_INSTANCE is just numeric. # SDP_SERVERID must be unique for all servers with the same master (standard) server. SDP_SERVERID=Replica1 # The value of the Services field in "p4 server", e.g. standard, replica, forwarding-replica, build-server SDP_SERVICE_TYPE=forwarding-replica # The port number - must be numeric (and unique on the machine) SDP_P4PORT_NUMBER=1888 # Service user not required on a Master (standard) server. Typically the same as the SDP_INSTANCE or SDP_SERVERID SDP_P4SERVICEUSER=Replica1 # These next 3 are the root drive/directory values # Often these are separate drives, but they can be on the same drive and all be the # same value. # Examples: # METADATA_ROOT=E: # METADATA_ROOT=C:\p4assets METADATA_ROOT=E: DEPOTDATA_ROOT=F: LOGDATA_ROOT=G: # The following are not required for master servers or where there is no replica. # This is used by replicas to access the root directory of DEPOTDATA_ROOT above. REMOTE_DEPOTDATA_ROOT=\\MasterHostname\f$
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#1 | 24292 | gmc | "Forking branch Dev of perforce-software-sdp to gmc-sdp." | ||
//guest/perforce_software/sdp/dev/Server/Windows/setup/sdp_master_config.ini | |||||
#5 | 20541 | Robert Cowham | Add new values for sending email: mailhostport and email_pass_filename | ||
#4 | 16373 | C. Thomas Tyler |
Routine Merge Down to dev from main using: p4 merge -b perforce_software-sdp-dev |
||
#3 | 16335 | C. Thomas Tyler |
Routine Merge Down to dev from main using: p4 merge -b perforce_software-sdp-dev |
||
#2 | 15701 | C. Thomas Tyler | Routine merge down using 'p4 merge -b perforce_software-sdp-dev'. | ||
#1 | 10961 | C. Thomas Tyler | Merge down from main. | ||
//guest/perforce_software/sdp/main/Server/Windows/setup/sdp_master_config.ini | |||||
#1 | 10872 | C. Thomas Tyler |
Added Windows SDP into The Workshop: * Combined (back) into Unix SDP structure. * Avoided adding duplicate files p4verify.pl, p4review.(py,cfg). * Upgraded 'dist.sh' utility to produce both Unix and Windows packages (*.tgz and *.zip), adjusting line endings on text files to be appropriate for Windows prior to packaging. To Do: * Resolve duplication of [template_]configure_new_server.bat. * Merge test suites for Windows and Unix into a cohesive set. |