#------------------------------------------------------------------------------ # Config file for reset_sdp.sh v3.16.1. #------------------------------------------------------------------------------ # This file is in bash shell script syntax. # Note: Avoid spaces before and after the '=' sign. # For demo and training installations, usually all defaults in this file # are fine. # For Proof of Concept (PoC) installation, Section 1 (Localization) settings # should all be changed to local values. Some settings in Section 2 (Data # Specific) might also be changed. # Changing settings in Section 3 (Deep Customization) is generally # discouraged unless necessary when bootsraping a prodction installation or # a high-realism PoC. #------------------------------------------------------------------------------ # Section 1: Localization #------------------------------------------------------------------------------ # Changing all these is typical and expected, even for PoC installations. # Specify email server for the p4review script. Ignore if Helix Swarm is used. SMTPServer=smtp.p4demo.com # Specify an email address to receive updates from admin scripts. This may be # a distribution list or comma-separated list of addresses (with no spaces). P4AdminList=P4AdminList@p4demo.com # Specify an email address from which emails from admin scripts are sent. # This must be a single email address. MailFrom=P4Admin@p4demo.com # Specify the DNS alias to refer to he master server, e.g. by end # users. This might be 'perforce' but probably not an actual host name # like 'perforce01', which would be known only to admins. DNS_name_of_master_server=helix # Specify a geographic site tag for the master server location, # e.g. 'bos' for Boston, MA, USA. SiteTag=bos #------------------------------------------------------------------------------ # Section 2: Data Specific #------------------------------------------------------------------------------ # These settings can be changed to desired values, though default values are # preferred for demo installations. # Specify the TCP port for p4d to listen on. Typically this is 1999 if # p4broker is used, or 1666 if only p4d is used. P4_PORT=1999 # Specify the TCP port for p4broker to listen on. Must be different # from the P4_PORT. P4BROKER_PORT=1666 # Specify SDP instance name, e.g. '1' for /p4/1. Instance=1 # Helix Core case sensitivity, '1' (sensitive) or '0' (insensitive). If # data from a checkpoint is to be migrated into this instance, set this # CaseSensitive value to match the case handling of the incoming data set # (as shown with 'p4 info'). CaseSensitive=1 # Set the P4USER value for the Perforce super user. P4USER=perforce # Set the password for the super user (see P4USER). If using this Helix Installer to # bootstrap a production installation, replace this default password with your own. Password=F@stSCM! # Specify '1' to avoid sending email from admin scripts, or 0 to send # email from admin scripts. SimulateEmail=1 #------------------------------------------------------------------------------ # Section 3: Deep Customization #------------------------------------------------------------------------------ # Changing these settings is gently discouraged, but may be necessary for # bootstrapping some production environments with hard-to-change default # values for settings such as OSUSER, OSGROUP, etc. # Specify the Linux Operating System account under which p4d and other Helix # services will run as. This user will be created if it does not exist. If # created, the password will match that of the P4USER. OSUSER=perforce # Specify the primary group for the Linux Operating System account specified # as OSUSER. OSGROUP=perforce #Specify a comma-delimited list of any additional groups the OSUSER to be # created should be in. This is passed to the 'useradd' command the '-G' # flag. These groups must already exist. OSUSER_ADDITIONAL_GROUPS= # Specify home directory of the Linux account under which p4d and other Helix # services will run as, and the group, in the form <user>:<group>. This user # and group will be created if they do not exist. OSUSER_HOME=/home/perforce # The version Helix executables to be downloaded: p4, p4d, p4broker, and p4p. P4ExeRel=r20.1 # The version of the C++ API to be downloaded, for building dervied APIs such # as P4Perl and P4Python. This is typically the same as P4ExeRel, but # sometimes behind as P4Perl and P4Python can lag behind Helix Core releases. P4APIRel=r20.1
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#26 | 30496 | C. Thomas Tyler | Updated Version, README.md, Release Notes, and doc files Release. | ||
#25 | 30459 | C. Thomas Tyler |
Change URLs in curl calls in docs and code to avoid Apache redirects. Also removed '-s' option from curl calls. |
||
#24 | 30412 | C. Thomas Tyler | Updated docs. | ||
#23 | 30399 | C. Thomas Tyler | Adapted to SDP default value of 'localhost' for DNS name of commit server. | ||
#22 | 30398 | C. Thomas Tyler | Add '-no_enable' option to avoid enabling installed services. | ||
#21 | 30397 | C. Thomas Tyler |
Adjust location of generated crontab file to: /p4/common/etc/cron.d/crontab.<user>.<short_hostname>.<instance>. |
||
#20 | 30393 | C. Thomas Tyler | Updated docs for release. | ||
#19 | 30299 | C. Thomas Tyler | Updated docs. | ||
#18 | 30213 | C. Thomas Tyler |
Added '-si <SDPInstance>' as a command line option, so there is one less reason to need to do the more complex 'Configured' installation, especially for a proxy or stand-alone broker. #review-30214 |
||
#17 | 29698 | C. Thomas Tyler |
Changed 'curl' commands referencing Workshop to use '-L'. Updated stable version numbers in README.md to use new versions with corrected URLs. |
||
#16 | 29661 | C. Thomas Tyler | Updated doc and sample to match latest version of reset_sdp.sh. | ||
#15 | 29362 | C. Thomas Tyler | Updated default Helix Core version from r22.1 -> r22.2. | ||
#14 | 28662 | C. Thomas Tyler |
Added support for SELinux in enforcing mode. Enhanced documentation, including notes about SELinux handling. |
||
#13 | 28656 | C. Thomas Tyler | Updated docs to latest. | ||
#12 | 28266 | C. Thomas Tyler |
Improved support for proxy-only hosts. #review-28267 @rwillyoung |
||
#11 | 28126 | C. Thomas Tyler | Rengerated docs. | ||
#10 | 27989 | C. Thomas Tyler | Updated sample settings.cfg file to latest version. | ||
#9 | 27553 | C. Thomas Tyler |
Spell check only. Non-functional changes. Docs udpated. Fixed typos in comments and messages, including generated settings.cfg files. |
||
#8 | 27389 | C. Thomas Tyler | Updated. | ||
#7 | 27305 | C. Thomas Tyler | Added rsync package to all platforms. | ||
#6 | 27301 | C. Thomas Tyler | Updated generated settings.cfg. | ||
#5 | 26784 | C. Thomas Tyler |
reset_sdp.sh v3.17.0: Made /hx* mount points configurable in settings.cfg, and updated documentation accordingly. Added support for configuring /hxmetadata1 and /hxmetadata2 with different values. Added test coverage for changing /hxdepots from the default. Enhanced test suite. TEST FAIL NOTE: As of this change, tests are succeeding on all platforms except CentOS 6. Failures are in the test suite infrastructure, not related to this change. |
||
#4 | 26607 | C. Thomas Tyler | Non-functional changes to maintain shellcheck compliance. | ||
#3 | 26576 | C. Thomas Tyler |
Fixed order-of-operations issue due to recent changes in SDP; the logic to implement 'sudo' as required to call 'systemd' wrappers now requires the sudo to be called before the call to configure_sample_depot.sh. Refined firewall handling logic. |
||
#2 | 26566 | C. Thomas Tyler | Updated sample settings.cfg to match latest script. | ||
#1 | 26030 | C. Thomas Tyler | Documentation enhancements, including adding sample generated settings.cfg file. |