/* * regcomp and regexec -- regsub and regerror are elsewhere * * Copyright (c) 1986 by University of Toronto. * Written by Henry Spencer. Not derived from licensed software. * * Permission is granted to anyone to use this software for any * purpose on any computer system, and to redistribute it freely, * subject to the following restrictions: * * 1. The author is not responsible for the consequences of use of * this software, no matter how awful, even if they arise * from defects in it. * * 2. The origin of this software must not be misrepresented, either * by explicit claim or by omission. * * 3. Altered versions must be plainly marked as such, and must not * be misrepresented as being the original software. *** THIS IS AN ALTERED VERSION. It was altered by John Gilmore, *** hoptoad!gnu, on 27 Dec 1986, to add \n as an alternative to | *** to assist in implementing egrep. *** THIS IS AN ALTERED VERSION. It was altered by John Gilmore, *** hoptoad!gnu, on 27 Dec 1986, to add \< and \> for word-matching *** as in BSD grep and ex. *** THIS IS AN ALTERED VERSION. It was altered by John Gilmore, *** hoptoad!gnu, on 28 Dec 1986, to optimize characters quoted with \. *** THIS IS AN ALTERED VERSION. It was altered by James A. Woods, *** ames!jaw, on 19 June 1987, to quash a regcomp() redundancy. *** THIS IS AN ALTERED VERSION. It was altered by Christopher Seiwald *** seiwald@vix.com, on 28 August 1993, for use in jam. Regmagic.h *** was moved into regexp.h, and the include of regexp.h now uses "'s *** to avoid conflicting with the system regexp.h. Const, bless its *** soul, was removed so it can compile everywhere. The declaration *** of strchr() was in conflict on AIX, so it was removed (as it is *** happily defined in string.h). *** THIS IS AN ALTERED VERSION. It was altered by Christopher Seiwald *** seiwald@perforce.com, on 20 January 2000, to use function prototypes. * * Beware that some of this code is subtly aware of the way operator * precedence is structured in regular expressions. Serious changes in * regular-expression syntax might require a total rethink. */ #include "regexp.h" #include <stdio.h> #include <ctype.h> #ifndef ultrix #include <stdlib.h> #endif #include <string.h> /* * The "internal use only" fields in regexp.h are present to pass info from * compile to execute that permits the execute phase to run lots faster on * simple cases. They are: * * regstart char that must begin a match; '\0' if none obvious * reganch is the match anchored (at beginning-of-line only)? * regmust string (pointer into program) that match must include, or NULL * regmlen length of regmust string * * Regstart and reganch permit very fast decisions on suitable starting points * for a match, cutting down the work a lot. Regmust permits fast rejection * of lines that cannot possibly match. The regmust tests are costly enough * that regcomp() supplies a regmust only if the r.e. contains something * potentially expensive (at present, the only such thing detected is * or + * at the start of the r.e., which can involve a lot of backup). Regmlen is * supplied because the test in regexec() needs it and regcomp() is computing * it anyway. */ /* * Structure for regexp "program". This is essentially a linear encoding * of a nondeterministic finite-state machine (aka syntax charts or * "railroad normal form" in parsing technology). Each node is an opcode * plus a "next" pointer, possibly plus an operand. "Next" pointers of * all nodes except BRANCH implement concatenation; a "next" pointer with * a BRANCH on both ends of it is connecting two alternatives. (Here we * have one of the subtle syntax dependencies: an individual BRANCH (as * opposed to a collection of them) is never concatenated with anything * because of operator precedence.) The operand of some types of node is * a literal string; for others, it is a node leading into a sub-FSM. In * particular, the operand of a BRANCH node is the first node of the branch. * (NB this is *not* a tree structure: the tail of the branch connects * to the thing following the set of BRANCHes.) The opcodes are: */ /* definition number opnd? meaning */ #define END 0 /* no End of program. */ #define BOL 1 /* no Match "" at beginning of line. */ #define EOL 2 /* no Match "" at end of line. */ #define ANY 3 /* no Match any one character. */ #define ANYOF 4 /* str Match any character in this string. */ #define ANYBUT 5 /* str Match any character not in this string. */ #define BRANCH 6 /* node Match this alternative, or the next... */ #define BACK 7 /* no Match "", "next" ptr points backward. */ #define EXACTLY 8 /* str Match this string. */ #define NOTHING 9 /* no Match empty string. */ #define STAR 10 /* node Match this (simple) thing 0 or more times. */ #define PLUS 11 /* node Match this (simple) thing 1 or more times. */ #define WORDA 12 /* no Match "" at wordchar, where prev is nonword */ #define WORDZ 13 /* no Match "" at nonwordchar, where prev is word */ #define OPEN 20 /* no Mark this point in input as start of #n. */ /* OPEN+1 is number 1, etc. */ #define CLOSE 30 /* no Analogous to OPEN. */ /* * Opcode notes: * * BRANCH The set of branches constituting a single choice are hooked * together with their "next" pointers, since precedence prevents * anything being concatenated to any individual branch. The * "next" pointer of the last BRANCH in a choice points to the * thing following the whole choice. This is also where the * final "next" pointer of each individual branch points; each * branch starts with the operand node of a BRANCH node. * * BACK Normal "next" pointers all implicitly point forward; BACK * exists to make loop structures possible. * * STAR,PLUS '?', and complex '*' and '+', are implemented as circular * BRANCH structures using BACK. Simple cases (one character * per match) are implemented with STAR and PLUS for speed * and to minimize recursive plunges. * * OPEN,CLOSE ...are numbered at compile time. */ /* * A node is one char of opcode followed by two chars of "next" pointer. * "Next" pointers are stored as two 8-bit pieces, high order first. The * value is a positive offset from the opcode of the node containing it. * An operand, if any, simply follows the node. (Note that much of the * code generation knows about this implicit relationship.) * * Using two bytes for the "next" pointer is vast overkill for most things, * but allows patterns to get big without disasters. */ #define OP(p) (*(p)) #define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377)) #define OPERAND(p) ((p) + 3) /* * See regmagic.h for one further detail of program structure. */ /* * Utility definitions. */ #ifndef CHARBITS #define UCHARAT(p) ((int)*(unsigned char *)(p)) #else #define UCHARAT(p) ((int)*(p)&CHARBITS) #endif #define FAIL(m) { regerror(m); return(NULL); } #define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?') /* * Flags to be passed up and down. */ #define HASWIDTH 01 /* Known never to match null string. */ #define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */ #define SPSTART 04 /* Starts with * or +. */ #define WORST 0 /* Worst case. */ /* * Global work variables for regcomp(). */ static char *regparse; /* Input-scan pointer. */ static int regnpar; /* () count. */ static char regdummy; static char *regcode; /* Code-emit pointer; ®dummy = don't. */ static long regsize; /* Code size. */ /* * Forward declarations for regcomp()'s friends. */ #ifndef STATIC #define STATIC static #endif STATIC char *reg( int paren, int *flagp ); STATIC char *regbranch( int *flagp ); STATIC char *regpiece( int *flagp ); STATIC char *regatom( int *flagp ); STATIC char *regnode( int op ); STATIC char *regnext( register char *p ); STATIC void regc( int b ); STATIC void reginsert( char op, char *opnd ); STATIC void regtail( char *p, char *val ); STATIC void regoptail( char *p, char *val ); #ifdef STRCSPN STATIC int strcspn(); #endif /* - regcomp - compile a regular expression into internal code * * We can't allocate space until we know how big the compiled form will be, * but we can't compile it (and thus know how big it is) until we've got a * place to put the code. So we cheat: we compile it twice, once with code * generation turned off and size counting turned on, and once "for real". * This also means that we don't allocate space until we are sure that the * thing really will compile successfully, and we never have to move the * code and thus invalidate pointers into it. (Note that it has to be in * one piece because free() must be able to free it all.) * * Beware that the optimization-preparation code in here knows about some * of the structure of the compiled regexp. */ regexp * regcomp( char *exp ) { register regexp *r; register char *scan; register char *longest; register unsigned len; int flags; if (exp == NULL) FAIL("NULL argument"); /* First pass: determine size, legality. */ #ifdef notdef if (exp[0] == '.' && exp[1] == '*') exp += 2; /* aid grep */ #endif regparse = (char *)exp; regnpar = 1; regsize = 0L; regcode = ®dummy; regc(MAGIC); if (reg(0, &flags) == NULL) return(NULL); /* Small enough for pointer-storage convention? */ if (regsize >= 32767L) /* Probably could be 65535L. */ FAIL("regexp too big"); /* Allocate space. */ r = (regexp *)malloc(sizeof(regexp) + (unsigned)regsize); if (r == NULL) FAIL("out of space"); /* Second pass: emit code. */ regparse = (char *)exp; regnpar = 1; regcode = r->program; regc(MAGIC); if (reg(0, &flags) == NULL) return(NULL); /* Dig out information for optimizations. */ r->regstart = '\0'; /* Worst-case defaults. */ r->reganch = 0; r->regmust = NULL; r->regmlen = 0; scan = r->program+1; /* First BRANCH. */ if (OP(regnext(scan)) == END) { /* Only one top-level choice. */ scan = OPERAND(scan); /* Starting-point info. */ if (OP(scan) == EXACTLY) r->regstart = *OPERAND(scan); else if (OP(scan) == BOL) r->reganch++; /* * If there's something expensive in the r.e., find the * longest literal string that must appear and make it the * regmust. Resolve ties in favor of later strings, since * the regstart check works with the beginning of the r.e. * and avoiding duplication strengthens checking. Not a * strong reason, but sufficient in the absence of others. */ if (flags&SPSTART) { longest = NULL; len = 0; for (; scan != NULL; scan = regnext(scan)) if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) { longest = OPERAND(scan); len = strlen(OPERAND(scan)); } r->regmust = longest; r->regmlen = len; } } return(r); } /* - reg - regular expression, i.e. main body or parenthesized thing * * Caller must absorb opening parenthesis. * * Combining parenthesis handling with the base level of regular expression * is a trifle forced, but the need to tie the tails of the branches to what * follows makes it hard to avoid. */ static char * reg( int paren, /* Parenthesized? */ int *flagp ) { register char *ret; register char *br; register char *ender; register int parno; int flags; *flagp = HASWIDTH; /* Tentatively. */ /* Make an OPEN node, if parenthesized. */ if (paren) { if (regnpar >= NSUBEXP) FAIL("too many ()"); parno = regnpar; regnpar++; ret = regnode(OPEN+parno); } else ret = NULL; /* Pick up the branches, linking them together. */ br = regbranch(&flags); if (br == NULL) return(NULL); if (ret != NULL) regtail(ret, br); /* OPEN -> first. */ else ret = br; if (!(flags&HASWIDTH)) *flagp &= ~HASWIDTH; *flagp |= flags&SPSTART; while (*regparse == '|' || *regparse == '\n') { regparse++; br = regbranch(&flags); if (br == NULL) return(NULL); regtail(ret, br); /* BRANCH -> BRANCH. */ if (!(flags&HASWIDTH)) *flagp &= ~HASWIDTH; *flagp |= flags&SPSTART; } /* Make a closing node, and hook it on the end. */ ender = regnode((paren) ? CLOSE+parno : END); regtail(ret, ender); /* Hook the tails of the branches to the closing node. */ for (br = ret; br != NULL; br = regnext(br)) regoptail(br, ender); /* Check for proper termination. */ if (paren && *regparse++ != ')') { FAIL("unmatched ()"); } else if (!paren && *regparse != '\0') { if (*regparse == ')') { FAIL("unmatched ()"); } else FAIL("junk on end"); /* "Can't happen". */ /* NOTREACHED */ } return(ret); } /* - regbranch - one alternative of an | operator * * Implements the concatenation operator. */ static char * regbranch( int *flagp ) { register char *ret; register char *chain; register char *latest; int flags; *flagp = WORST; /* Tentatively. */ ret = regnode(BRANCH); chain = NULL; while (*regparse != '\0' && *regparse != ')' && *regparse != '\n' && *regparse != '|') { latest = regpiece(&flags); if (latest == NULL) return(NULL); *flagp |= flags&HASWIDTH; if (chain == NULL) /* First piece. */ *flagp |= flags&SPSTART; else regtail(chain, latest); chain = latest; } if (chain == NULL) /* Loop ran zero times. */ (void) regnode(NOTHING); return(ret); } /* - regpiece - something followed by possible [*+?] * * Note that the branching code sequences used for ? and the general cases * of * and + are somewhat optimized: they use the same NOTHING node as * both the endmarker for their branch list and the body of the last branch. * It might seem that this node could be dispensed with entirely, but the * endmarker role is not redundant. */ static char * regpiece( int *flagp ) { register char *ret; register char op; register char *next; int flags; ret = regatom(&flags); if (ret == NULL) return(NULL); op = *regparse; if (!ISMULT(op)) { *flagp = flags; return(ret); } if (!(flags&HASWIDTH) && op != '?') FAIL("*+ operand could be empty"); *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH); if (op == '*' && (flags&SIMPLE)) reginsert(STAR, ret); else if (op == '*') { /* Emit x* as (x&|), where & means "self". */ reginsert(BRANCH, ret); /* Either x */ regoptail(ret, regnode(BACK)); /* and loop */ regoptail(ret, ret); /* back */ regtail(ret, regnode(BRANCH)); /* or */ regtail(ret, regnode(NOTHING)); /* null. */ } else if (op == '+' && (flags&SIMPLE)) reginsert(PLUS, ret); else if (op == '+') { /* Emit x+ as x(&|), where & means "self". */ next = regnode(BRANCH); /* Either */ regtail(ret, next); regtail(regnode(BACK), ret); /* loop back */ regtail(next, regnode(BRANCH)); /* or */ regtail(ret, regnode(NOTHING)); /* null. */ } else if (op == '?') { /* Emit x? as (x|) */ reginsert(BRANCH, ret); /* Either x */ regtail(ret, regnode(BRANCH)); /* or */ next = regnode(NOTHING); /* null. */ regtail(ret, next); regoptail(ret, next); } regparse++; if (ISMULT(*regparse)) FAIL("nested *?+"); return(ret); } /* - regatom - the lowest level * * Optimization: gobbles an entire sequence of ordinary characters so that * it can turn them into a single node, which is smaller to store and * faster to run. Backslashed characters are exceptions, each becoming a * separate node; the code is simpler that way and it's not worth fixing. */ static char * regatom( int *flagp ) { register char *ret; int flags; *flagp = WORST; /* Tentatively. */ switch (*regparse++) { /* FIXME: these chars only have meaning at beg/end of pat? */ case '^': ret = regnode(BOL); break; case '$': ret = regnode(EOL); break; case '.': ret = regnode(ANY); *flagp |= HASWIDTH|SIMPLE; break; case '[': { register int classr; register int classend; if (*regparse == '^') { /* Complement of range. */ ret = regnode(ANYBUT); regparse++; } else ret = regnode(ANYOF); if (*regparse == ']' || *regparse == '-') regc(*regparse++); while (*regparse != '\0' && *regparse != ']') { if (*regparse == '-') { regparse++; if (*regparse == ']' || *regparse == '\0') regc('-'); else { classr = UCHARAT(regparse-2)+1; classend = UCHARAT(regparse); if (classr > classend+1) FAIL("invalid [] range"); for (; classr <= classend; classr++) regc(classr); regparse++; } } else regc(*regparse++); } regc('\0'); if (*regparse != ']') FAIL("unmatched []"); regparse++; *flagp |= HASWIDTH|SIMPLE; } break; case '(': ret = reg(1, &flags); if (ret == NULL) return(NULL); *flagp |= flags&(HASWIDTH|SPSTART); break; case '\0': case '|': case '\n': case ')': FAIL("internal urp"); /* Supposed to be caught earlier. */ break; case '?': case '+': case '*': FAIL("?+* follows nothing"); break; case '\\': switch (*regparse++) { case '\0': FAIL("trailing \\"); break; case '<': ret = regnode(WORDA); break; case '>': ret = regnode(WORDZ); break; /* FIXME: Someday handle \1, \2, ... */ default: /* Handle general quoted chars in exact-match routine */ goto de_fault; } break; de_fault: default: /* * Encode a string of characters to be matched exactly. * * This is a bit tricky due to quoted chars and due to * '*', '+', and '?' taking the SINGLE char previous * as their operand. * * On entry, the char at regparse[-1] is going to go * into the string, no matter what it is. (It could be * following a \ if we are entered from the '\' case.) * * Basic idea is to pick up a good char in ch and * examine the next char. If it's *+? then we twiddle. * If it's \ then we frozzle. If it's other magic char * we push ch and terminate the string. If none of the * above, we push ch on the string and go around again. * * regprev is used to remember where "the current char" * starts in the string, if due to a *+? we need to back * up and put the current char in a separate, 1-char, string. * When regprev is NULL, ch is the only char in the * string; this is used in *+? handling, and in setting * flags |= SIMPLE at the end. */ { char *regprev; register char ch; regparse--; /* Look at cur char */ ret = regnode(EXACTLY); for ( regprev = 0 ; ; ) { ch = *regparse++; /* Get current char */ switch (*regparse) { /* look at next one */ default: regc(ch); /* Add cur to string */ break; case '.': case '[': case '(': case ')': case '|': case '\n': case '$': case '^': case '\0': /* FIXME, $ and ^ should not always be magic */ magic: regc(ch); /* dump cur char */ goto done; /* and we are done */ case '?': case '+': case '*': if (!regprev) /* If just ch in str, */ goto magic; /* use it */ /* End mult-char string one early */ regparse = regprev; /* Back up parse */ goto done; case '\\': regc(ch); /* Cur char OK */ switch (regparse[1]){ /* Look after \ */ case '\0': case '<': case '>': /* FIXME: Someday handle \1, \2, ... */ goto done; /* Not quoted */ default: /* Backup point is \, scan * point is after it. */ regprev = regparse; regparse++; continue; /* NOT break; */ } } regprev = regparse; /* Set backup point */ } done: regc('\0'); *flagp |= HASWIDTH; if (!regprev) /* One char? */ *flagp |= SIMPLE; } break; } return(ret); } /* - regnode - emit a node */ static char * /* Location. */ regnode( int op ) { register char *ret; register char *ptr; ret = regcode; if (ret == ®dummy) { regsize += 3; return(ret); } ptr = ret; *ptr++ = op; *ptr++ = '\0'; /* Null "next" pointer. */ *ptr++ = '\0'; regcode = ptr; return(ret); } /* - regc - emit (if appropriate) a byte of code */ static void regc( int b ) { if (regcode != ®dummy) *regcode++ = b; else regsize++; } /* - reginsert - insert an operator in front of already-emitted operand * * Means relocating the operand. */ static void reginsert( char op, char *opnd ) { register char *src; register char *dst; register char *place; if (regcode == ®dummy) { regsize += 3; return; } src = regcode; regcode += 3; dst = regcode; while (src > opnd) *--dst = *--src; place = opnd; /* Op node, where operand used to be. */ *place++ = op; *place++ = '\0'; *place++ = '\0'; } /* - regtail - set the next-pointer at the end of a node chain */ static void regtail( char *p, char *val ) { register char *scan; register char *temp; register int offset; if (p == ®dummy) return; /* Find last node. */ scan = p; for (;;) { temp = regnext(scan); if (temp == NULL) break; scan = temp; } if (OP(scan) == BACK) offset = scan - val; else offset = val - scan; *(scan+1) = (offset>>8)&0377; *(scan+2) = offset&0377; } /* - regoptail - regtail on operand of first argument; nop if operandless */ static void regoptail( char *p, char *val ) { /* "Operandless" and "op != BRANCH" are synonymous in practice. */ if (p == NULL || p == ®dummy || OP(p) != BRANCH) return; regtail(OPERAND(p), val); } /* * regexec and friends */ /* * Global work variables for regexec(). */ static char *reginput; /* String-input pointer. */ static char *regbol; /* Beginning of input, for ^ check. */ static char **regstartp; /* Pointer to startp array. */ static char **regendp; /* Ditto for endp. */ /* * Forwards. */ STATIC int regtry( regexp *prog, char *string ); STATIC int regmatch( char *prog ); STATIC int regrepeat( char *p ); #ifdef DEBUG int regnarrate = 0; void regdump(); STATIC char *regprop(); #endif /* - regexec - match a regexp against a string */ int regexec( register regexp *prog, register char *string ) { register char *s; /* Be paranoid... */ if (prog == NULL || string == NULL) { regerror("NULL parameter"); return(0); } /* Check validity of program. */ if (UCHARAT(prog->program) != MAGIC) { regerror("corrupted program"); return(0); } /* If there is a "must appear" string, look for it. */ if (prog->regmust != NULL) { s = (char *)string; while ((s = strchr(s, prog->regmust[0])) != NULL) { if (strncmp(s, prog->regmust, prog->regmlen) == 0) break; /* Found it. */ s++; } if (s == NULL) /* Not present. */ return(0); } /* Mark beginning of line for ^ . */ regbol = (char *)string; /* Simplest case: anchored match need be tried only once. */ if (prog->reganch) return(regtry(prog, string)); /* Messy cases: unanchored match. */ s = (char *)string; if (prog->regstart != '\0') /* We know what char it must start with. */ while ((s = strchr(s, prog->regstart)) != NULL) { if (regtry(prog, s)) return(1); s++; } else /* We don't -- general case. */ do { if (regtry(prog, s)) return(1); } while (*s++ != '\0'); /* Failure. */ return(0); } /* - regtry - try match at specific point */ static int /* 0 failure, 1 success */ regtry( regexp *prog, char *string ) { register int i; register char **sp; register char **ep; reginput = string; regstartp = prog->startp; regendp = prog->endp; sp = prog->startp; ep = prog->endp; for (i = NSUBEXP; i > 0; i--) { *sp++ = NULL; *ep++ = NULL; } if (regmatch(prog->program + 1)) { prog->startp[0] = string; prog->endp[0] = reginput; return(1); } else return(0); } /* - regmatch - main matching routine * * Conceptually the strategy is simple: check to see whether the current * node matches, call self recursively to see whether the rest matches, * and then act accordingly. In practice we make some effort to avoid * recursion, in particular by going through "ordinary" nodes (that don't * need to know whether the rest of the match failed) by a loop instead of * by recursion. */ static int /* 0 failure, 1 success */ regmatch( char *prog ) { register char *scan; /* Current node. */ char *next; /* Next node. */ scan = prog; #ifdef DEBUG if (scan != NULL && regnarrate) fprintf(stderr, "%s(\n", regprop(scan)); #endif while (scan != NULL) { #ifdef DEBUG if (regnarrate) fprintf(stderr, "%s...\n", regprop(scan)); #endif next = regnext(scan); switch (OP(scan)) { case BOL: if (reginput != regbol) return(0); break; case EOL: if (*reginput != '\0') return(0); break; case WORDA: /* Must be looking at a letter, digit, or _ */ if ((!isalnum(*reginput)) && *reginput != '_') return(0); /* Prev must be BOL or nonword */ if (reginput > regbol && (isalnum(reginput[-1]) || reginput[-1] == '_')) return(0); break; case WORDZ: /* Must be looking at non letter, digit, or _ */ if (isalnum(*reginput) || *reginput == '_') return(0); /* We don't care what the previous char was */ break; case ANY: if (*reginput == '\0') return(0); reginput++; break; case EXACTLY: { register int len; register char *opnd; opnd = OPERAND(scan); /* Inline the first character, for speed. */ if (*opnd != *reginput) return(0); len = strlen(opnd); if (len > 1 && strncmp(opnd, reginput, len) != 0) return(0); reginput += len; } break; case ANYOF: if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) == NULL) return(0); reginput++; break; case ANYBUT: if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) != NULL) return(0); reginput++; break; case NOTHING: break; case BACK: break; case OPEN+1: case OPEN+2: case OPEN+3: case OPEN+4: case OPEN+5: case OPEN+6: case OPEN+7: case OPEN+8: case OPEN+9: { register int no; register char *save; no = OP(scan) - OPEN; save = reginput; if (regmatch(next)) { /* * Don't set startp if some later * invocation of the same parentheses * already has. */ if (regstartp[no] == NULL) regstartp[no] = save; return(1); } else return(0); } break; case CLOSE+1: case CLOSE+2: case CLOSE+3: case CLOSE+4: case CLOSE+5: case CLOSE+6: case CLOSE+7: case CLOSE+8: case CLOSE+9: { register int no; register char *save; no = OP(scan) - CLOSE; save = reginput; if (regmatch(next)) { /* * Don't set endp if some later * invocation of the same parentheses * already has. */ if (regendp[no] == NULL) regendp[no] = save; return(1); } else return(0); } break; case BRANCH: { register char *save; if (OP(next) != BRANCH) /* No choice. */ next = OPERAND(scan); /* Avoid recursion. */ else { do { save = reginput; if (regmatch(OPERAND(scan))) return(1); reginput = save; scan = regnext(scan); } while (scan != NULL && OP(scan) == BRANCH); return(0); /* NOTREACHED */ } } break; case STAR: case PLUS: { register char nextch; register int no; register char *save; register int min; /* * Lookahead to avoid useless match attempts * when we know what character comes next. */ nextch = '\0'; if (OP(next) == EXACTLY) nextch = *OPERAND(next); min = (OP(scan) == STAR) ? 0 : 1; save = reginput; no = regrepeat(OPERAND(scan)); while (no >= min) { /* If it could work, try it. */ if (nextch == '\0' || *reginput == nextch) if (regmatch(next)) return(1); /* Couldn't or didn't -- back up. */ no--; reginput = save + no; } return(0); } break; case END: return(1); /* Success! */ break; default: regerror("memory corruption"); return(0); break; } scan = next; } /* * We get here only if there's trouble -- normally "case END" is * the terminating point. */ regerror("corrupted pointers"); return(0); } /* - regrepeat - repeatedly match something simple, report how many */ static int regrepeat( char *p ) { register int count = 0; register char *scan; register char *opnd; scan = reginput; opnd = OPERAND(p); switch (OP(p)) { case ANY: count = strlen(scan); scan += count; break; case EXACTLY: while (*opnd == *scan) { count++; scan++; } break; case ANYOF: while (*scan != '\0' && strchr(opnd, *scan) != NULL) { count++; scan++; } break; case ANYBUT: while (*scan != '\0' && strchr(opnd, *scan) == NULL) { count++; scan++; } break; default: /* Oh dear. Called inappropriately. */ regerror("internal foulup"); count = 0; /* Best compromise. */ break; } reginput = scan; return(count); } /* - regnext - dig the "next" pointer out of a node */ static char * regnext( register char *p ) { register int offset; if (p == ®dummy) return(NULL); offset = NEXT(p); if (offset == 0) return(NULL); if (OP(p) == BACK) return(p-offset); else return(p+offset); } #ifdef DEBUG STATIC char *regprop(); /* - regdump - dump a regexp onto stdout in vaguely comprehensible form */ void regdump( regexp *r ) { register char *s; register char op = EXACTLY; /* Arbitrary non-END op. */ register char *next; s = r->program + 1; while (op != END) { /* While that wasn't END last time... */ op = OP(s); printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */ next = regnext(s); if (next == NULL) /* Next ptr. */ printf("(0)"); else printf("(%d)", (s-r->program)+(next-s)); s += 3; if (op == ANYOF || op == ANYBUT || op == EXACTLY) { /* Literal string, where present. */ while (*s != '\0') { putchar(*s); s++; } s++; } putchar('\n'); } /* Header fields of interest. */ if (r->regstart != '\0') printf("start `%c' ", r->regstart); if (r->reganch) printf("anchored "); if (r->regmust != NULL) printf("must have \"%s\"", r->regmust); printf("\n"); } /* - regprop - printable representation of opcode */ static char * regprop( char *op ) { register char *p; static char buf[50]; (void) strcpy(buf, ":"); switch (OP(op)) { case BOL: p = "BOL"; break; case EOL: p = "EOL"; break; case ANY: p = "ANY"; break; case ANYOF: p = "ANYOF"; break; case ANYBUT: p = "ANYBUT"; break; case BRANCH: p = "BRANCH"; break; case EXACTLY: p = "EXACTLY"; break; case NOTHING: p = "NOTHING"; break; case BACK: p = "BACK"; break; case END: p = "END"; break; case OPEN+1: case OPEN+2: case OPEN+3: case OPEN+4: case OPEN+5: case OPEN+6: case OPEN+7: case OPEN+8: case OPEN+9: sprintf(buf+strlen(buf), "OPEN%d", OP(op)-OPEN); p = NULL; break; case CLOSE+1: case CLOSE+2: case CLOSE+3: case CLOSE+4: case CLOSE+5: case CLOSE+6: case CLOSE+7: case CLOSE+8: case CLOSE+9: sprintf(buf+strlen(buf), "CLOSE%d", OP(op)-CLOSE); p = NULL; break; case STAR: p = "STAR"; break; case PLUS: p = "PLUS"; break; case WORDA: p = "WORDA"; break; case WORDZ: p = "WORDZ"; break; default: regerror("corrupted opcode"); break; } if (p != NULL) (void) strcat(buf, p); return(buf); } #endif /* * The following is provided for those people who do not have strcspn() in * their C libraries. They should get off their butts and do something * about it; at least one public-domain implementation of those (highly * useful) string routines has been published on Usenet. */ #ifdef STRCSPN /* * strcspn - find length of initial segment of s1 consisting entirely * of characters not from s2 */ static int strcspn( char *s1, char *s2 ) { register char *scan1; register char *scan2; register int count; count = 0; for (scan1 = s1; *scan1 != '\0'; scan1++) { for (scan2 = s2; *scan2 != '\0';) /* ++ moved down. */ if (*scan1 == *scan2++) return(count); count++; } return(count); } #endif
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#4 | 2493 | rmg |
Rewrite the past: update all jam's source with comments to reflect changes since about 2.3, very early 2001. Whitespace only change. === computer:1666: Change 37660 by seiwald@play-seiwald on 2002/11/06 22:41:35 Note: I regenerated jamgram.c on my linux 7.3 system prior to the submit, since patch was so unhappy trying to lay down the changes from Christopher's change. Presumably this is just due to different yacc/bison/whatever particulars on the system where Christopher made the changes originally. - rmg |
||
#3 | 2491 | rmg |
Some consting in jam to make it more compilable by C++ compilers. No functional change. === computer:1666: Change 37433 by perforce@perforce on 2002/10/30 16:08:51 Recreational const-ing of jam, for compilers that don't allow "string" to be passed as a non-const char *. This included a few places where we were modifying what could possibly have been read-only storage, oddly enough. No functional change. === computer:1666: Change 37602 by seiwald@play-seiwald on 2002/11/04 17:25:40 |
||
#2 | 486 | Perforce staff |
Jam 2.3. See RELNOTES for a list of changes from 2.2.x. Just about every source file was touched when jam got ANSI-fied. |
||
#1 | 2 | laura | Add Jam/MR 2.2 source |