#!/usr/local/bin/perl -w =head1 NAME cvs.t - testing of vcp cvs i/o =cut use strict ; use Carp ; use Cwd ; use File::Spec ; use Test ; use VCP::TestUtils ; # use eq_or_diff from Test::Differences if available, # else just use ok. eval "use Test::Differences"; sub ok_or_diff { goto &eq_or_diff if defined &eq_or_diff; goto &Test::ok; } my @vcp = vcp_cmd ; my $t = -d 't' ? 't/' : '' ; my $module = 'foo' ; ## Must match the rev_root in the testrevml files my @revml_out_spec = ( "revml:", "--sort-by=name,rev_id" ) ; my $p4d_borken = $ENV{P4DBORKEN} || p4d_borken ; sub check { croak "test failed and FATALTEST set" if ! $_[0]; } my $infile_0 = "${t}test-cvs-in-0.revml"; my $infile_1 = "${t}test-cvs-in-1.revml"; my $cvsroot_0 = "${t}cvsroot_0"; my $cvsroot_1 = "${t}cvsroot_1"; my $cvs_spec_0 = "cvs:$cvsroot_0:$module/" ; my $cvs_spec_1 = "cvs:$cvsroot_1:$module/" ; ## Where to put the destination repository my $p4root = tmpdir "p4root"; my $state_location = tmpdir "vcp_state"; my $p4_spec = "p4:p4_t_user\@$p4root:"; my $repo_id; my @tests = ( ## ## cvs to p4 ## sub { return skip $p4d_borken, 1, 1, $p4d_borken if $p4d_borken ; my $cvs_spec = $cvs_spec_0; eval { run [ @vcp, "vcp:-" ], \<<TOHERE; }; Source: $cvs_spec_0 --repo-id=cvs:test_repository Destination: $p4_spec//depot/... --init-p4d --state-location=$state_location --change-branch-rev-1 Map: (...)<> main/\$1 # Match files on main branch (only) (...)<(...)> \$2/\$1 # Match files on branches TOHERE ok $@ || '', ''; # next sub checks this better }, ## ## check previous sub by reading resulting p4 into revml, ## and comparing to the p4 version of the generated source revml. ## sub { my $out; eval { run [ @vcp, "$p4_spec//depot/...", "--repo-id=p4:test_repository", "--run-p4d", @revml_out_spec, "--state-location=$state_location", ], \undef, \$out; }; die $@ if $@; my $infile = $t . "test-p4-in-0.revml"; my $in = slurp $infile ; s_content qw( rep_desc time user_id rep_type ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot" ; rm_elts qw( p4_info ), \$in, \$out ; rm_elts qw( label ), qr/r_\w+|ch_\w+/, \$out ; # TODO: CVS only sees one branch_id where p4 sees one for each dir. # not sure what to do. rm_elts qw( branches ), \$in, \$out ; $in =~ s{(id="|id>)/ignored}{$1//depot}g; ok_or_diff $out, $in; }, ## ## Incremental cvs->p4->revml update (cvs to p4 part) ## sub { return skip $p4d_borken, 1, 1, $p4d_borken if $p4d_borken ; eval { run [ @vcp, "vcp:-" ], \<<TOHERE; }; Source: $cvs_spec_1 --repo-id=cvs:test_repository --continue Destination: $p4_spec//depot/... --run-p4d --state-location=$state_location --change-branch-rev-1 Map: (...)<> main/\$1 # Match files on main branch (only) (...)<(...)> \$2/\$1 # Match files on branches TOHERE ok $@ || '', ''; # next sub checks this better }, ## ## part 2 of Incremental cvs->p4->revml update (p4 to revml, check result) ## sub { return skip $p4d_borken, 1, 1, $p4d_borken if $p4d_borken ; return skip 'last test did not complete', 1 if $@; my $out ; eval { run [ @vcp, "$p4_spec//depot/...", "--repo-id=p4:test_repository", "--continue", "--run-p4d", @revml_out_spec, "--state-location=$state_location", ], \undef, \$out; }; die $@ if $@; my $infile = $t . "test-p4-in-1.revml"; my $in = slurp $infile ; s_content qw( rep_desc time user_id rep_type ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot" ; rm_elts qw( p4_info ), \$in, \$out ; rm_elts qw( label ), qr/r_\w+|ch_\w+/, \$out ; $in =~ s{(id="|id>)/ignored}{$1//depot}g; # We need to get VCP::Dest::p4 to build up branch specifications. Until # then, don't test branches. rm_elts qw( branches ), \$in, \$out ; ok_or_diff $out, $in; }, ## ## cvs->p4->revml, re-rooting a dir tree ## ## Do this after the above tests so that we can start with an empty repo. ## sub { return skip $p4d_borken, 1, 1, $p4d_borken if $p4d_borken ; ## Start anew rm_dir_tree $p4root; rm_dir_tree $state_location; eval { run [ @vcp, "$cvs_spec_0/a/deeply/...", "$p4_spec//depot/new/...", "--state-location=$state_location", "--init-p4d", "--change-branch-rev-1" ], \undef; }; ok $@ || '', ''; # next sub checks this better }, sub { my $out ; eval { run [ @vcp, "$p4_spec//depot/new/...", "--repo-id=p4:test_repository", "--run-p4d", @revml_out_spec, "--state-location=$state_location", ], \undef, \$out; }; die $@ if $@; my $infile = $t . "test-p4-in-0.revml"; my $in = slurp $infile ; s_content qw( rep_desc time user_id rep_type ), \$in, \$out ; s_content qw( rev_root ), \$in, "depot/new" ; rm_elts qw( p4_info ), \$in, \$out ; rm_elts qw( label ), qr/r_\w+|ch_\w+/, \$out ; ## Strip out all files from $in that shouldn't be there rm_elts qw( rev ), qr{(?:(?!a/deeply).)*?}s, \$in ; ## Adjust the $in paths to look like the result paths. $in is ## now the "expected" output. $in =~ s{<(name|source_name)>main/a/deeply/}{<$1>}g ; $in =~ s{(id="|id>)/ignored/main/a/deeply}{$1//depot/new}g; #"# cperl syntax highlight fix # TODO: CVS only sees one branch_id where p4 sees one for each dir. # not sure what to do. rm_elts qw( branches ), \$in, \$out ; ok_or_diff $out, $in; }, ) ; plan tests => scalar( @tests ) ; my $why_skip ; $why_skip .= "p4 command not found\n" unless ( `p4 -V` || 0 ) =~ /^Perforce/ ; $why_skip .= cvs_borken ; $why_skip ? skip( $why_skip, 0 ) : $_->() for @tests ;
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#31 | 5403 | Barrie Slaymaker | - Misc logging, maintainability & debugging improvements | ||
#30 | 4417 | Barrie Slaymaker |
- Adapt to "estimated values" messages - Adapt to more accurate test suite |
||
#29 | 3970 | Barrie Slaymaker |
- VCP::Source handles rev queing, uses disk to reduce RAM - Lots of other fixes |
||
#28 | 3800 | Barrie Slaymaker | - <branches> removed from all code | ||
#27 | 3689 | Barrie Slaymaker | - 95cvs2p4.t no longer fails if p4d missing | ||
#26 | 3500 | Barrie Slaymaker |
- Use -kb on cvs export to suppress carriage returns. |
||
#25 | 3496 | Barrie Slaymaker | - VSS branching | ||
#24 | 3115 | Barrie Slaymaker |
Move sorting function to the new VCP::Filter::sort; it's for testing and reporting only and the code was bloating VCP::Dest and limiting VCP::Rev and VCP::Dest optimizations. Breaks test suite in minor way. |
||
#23 | 2973 | Barrie Slaymaker | Fix handling of branched but unchanged files | ||
#22 | 2926 | John Fetkovich |
remove --state-location switch add --db-dir and --repo-id switches build state location from concatenation of those two. |
||
#21 | 2915 | Barrie Slaymaker |
Default to *not* changing the first rev of a branch, add --change-branch-rev-1 to enable the non-default behavior (which is what is used by most of the test suite). |
||
#20 | 2909 | Barrie Slaymaker | Update this test script to current | ||
#19 | 2896 | John Fetkovich |
updated to use --continue and --state-location. not entirely working yet. |
||
#18 | 2895 | Barrie Slaymaker |
Tweak to not delete branch_ids, add TODOs, make sure a stubbed out test gets run. |
||
#17 | 2859 | Barrie Slaymaker | Work on Source::p4 branching issues | ||
#16 | 2802 | John Fetkovich |
Added a source_repo_id to each revision, and repo_id to each Source and Dest. The repo_ids include repository type (cvs,p4,revml,vss,...) and the repo_server fields. Changed the $self->...->set() and $self->...->get() lines in VCP::Dest::* to pass in a conglomerated key value, by passing in the key as an ARRAY ref. Also various restructuring in VCP::DB.pm, VCP::DB_file.pm and VCP::DB_file::sdbm.pm related to this change. |
||
#15 | 2756 | John Fetkovich | check skips if cvs not present | ||
#14 | 2743 | John Fetkovich |
Add fields to vcp: source_name, source_filebranch_id, source_branch_id, source_rev_id, source_change_id 1. Alter revml.dtd to include the fields 2. Alter bin/gentrevml to emit legal RevML 3. Extend VCP::Rev to have the fields 4. Extend VCP::{Source,Dest}::revml to read/write the fields (VCP::Dest::revml should die() if VCP tries to emit illegal RevML) 5. Extend VCP::{Source,Dest}::{cvs,p4} to read the fields 7. Get all tests through t/91*.t to pass except those that rely on ch_4 labels |
||
#13 | 2714 | Barrie Slaymaker |
Simplify t/90*cvs.t tests, remove make_cvsroots for speed and simplicity. |
||
#12 | 2656 | Barrie Slaymaker |
Remove remainder of winged-eel workarounds now that IPC::Run is fixed (in IPC::Run 0.75). |
||
#11 | 2638 | Barrie Slaymaker | Require fixed IPC::Run, remove workaround for buggy IPC::Run | ||
#10 | 2624 | John Fetkovich | minor fixes, including workaround for broken IPC::Run (to be removed) | ||
#9 | 2344 | Barrie Slaymaker | Make the labelsync code more self-documenting | ||
#8 | 2328 | Barrie Slaymaker |
fix up minor bugs in VCP::Source::p4, get t/95cvs2p4.t passing |
||
#7 | 2326 | Barrie Slaymaker | remove debug statement | ||
#6 | 2325 | Barrie Slaymaker | Get most tests working | ||
#5 | 2319 | Barrie Slaymaker | make t/test-*.revml be consistent with cvs2p4 and p42cvs scenarios | ||
#4 | 2307 | Barrie Slaymaker | get VCP::Filter::map working, update docs | ||
#3 | 2297 | Barrie Slaymaker | Adapt cvs, revml to a more realistic branching structure | ||
#2 | 2267 | Barrie Slaymaker | factor out cvs2revml, test both --use-cvs and direct modes, with times | ||
#1 | 2265 | Barrie Slaymaker | factor out t/95cvs2p4.pm and allow it to reuse the cvs repo for speed. |