= SDP Legacy Upgrade Guide (for Unix) Perforce Professional Services <email@example.com> :revnumber: v2020.1 :revdate: 2021-01-25 :doctype: book :icons: font :toc: :toclevels: 5 :sectnumlevels: 5 :xrefstyle: full // Attribute for ifdef usage :unix_doc: true == Preface This document provides an overview of the process to upgrade the SDP from any older version (dating back to 2007) to the SDP 2020.1 (aka "r20.1") release. If your SDP version is 2020.1 or newer, refer to the link:SDP_Guide.Unix.html[SDP Guide (Unix)] for instructions on how to upgrade from SDP 2020.1 to later version. Starting from SDP 2020.1, the upgrade procedure for the SDP is aided by automated and incremental upgrade mechanism similar to p4d itself, capable of upgrade SDP from the current release to any future version so long as the current release is SDP 2020.1 or newer. This document describes the process of upgrading to SDP r20.1. :sectnums: == Upgrading the SDP This section defines the procedure for ugprading the SDP itself. === Upgrade Order: SDP first, then Helix P4D The SDP should be upgraded prior to the upgrade of Helix Core (P4D). If you are upgrading P4D to or beyond P4D 2019.1 from a prior version of P4D, you __must__ upgrade the SDP first. If you run multiple instances of P4D on a given machine (potentially each running different versions of P4D), upgrade the SDP first before upgrading any of the instances. The SDP should also be upgraded before upgrading other Helix software on machines using the SDP, including p4d, p4p, p4broker, and p4 (the command line client). === Upgrading other Helix Software See the link:SDP_Guide.Unix.html[SDP Guide (Unix)] for instructions on how to upgrade Helix binaries in the SDP structure after the SDP has been upgraded to 2020.1. === SDP and P4D Version Compatibility The SDP is often forward- and backward-compatible with P4D versions, but for best results they should be kept in sync by upgrading SDP before P4D. This is partly becuase the SDP contains logic that helps upgrade P4D, which can change as P4D evolves. The SDP is aware of the P4D version, and has backward-compatibility logic to support older versions of P4D. This is guaranteed for supported versions of P4D. Backward compatiblity of SDP with older versions of P4D may extend farther back, though without the "offically supported" guarantee. === SDP Upgrade Methods There are several methods for upgrading to a new version of the SDP, summarized here: * *In-Place, Manual*: Manual upgrades of the SDP must be peformed to upgrade from versions older than r20.1 in-place on existing machines. This document provides details on how to do this. * *In-Place, Automated*: Automated in-place upgrades can be done if your current SDP version is r20.1 or later. Refer to documentation in link:SDP_Guide.Unix.html[SDP Guide (Unix)] for upgrading from SDP r20.1 onward. * *Migration-Style*: A migration-style upgrade is one in which the existing server machines (virtual or physical) are left in place, and brand new "green field" machines are installed fresh using the https://swarm.workshop.perforce.com/projects/perforce_software-helix-installer[Helix Installer] (which installs the latest SDP on a "green field" baseline operating system). Then the Helix Core data is migrated from the existing hardware to the new hardware. This approach is especially appealing when upgrading other aspects of the infrastructure, such as the hardware and/or operating system. * *Custom with HMS*: The https://swarm.workshop.perforce.com/projects/perforce_software-hms[Helix Management System] is used by some customers. == Planning Legacy SDP upgrades require some familiarization that should be done prior to scheduling an upgrade. === Mount Point Names You will need to be aware of your moint point names. While referred to as mount point names in this document, in any given installation any or all of the three SDP "mount points" may be simple directories on the root volume or some other volume. In some installations, creative liberties were taken to use fewer than three volumes, and in some cases the operating system root volume was used as one of the volumes. Investiage and be aware of how your installation was configured. In the examples below, the modern SDP mount point names are used: * `/hxdepots` - Volume for versioned files and rotated/numbered metadata journals. * `/hxmetadata`- Volume for active and offline metadata * `/hxlogs` - Volume for active journal and various logs. Depending on the version of the SDP, the above values may be used, or earlier defaults such as, `/depotdata`, `/metadata`, and `logs`. However, often customer sites changed from the defaults to custom values, such as `/depots`, `/p4db`, `/p4journal`, and others. In the sample steps in this document, adapt the steps to use your local values for mount point names to the new values. If your site uses two volumes for metadata, `/hxmetadata1` and `/hxmetadata2`, continue using the same names below. === Operating System User You will need to be aware of your operating system user that `p4d` runs as in your environment. The sample steps below assume that Perforce runs as the `peforce` operating system user, which is typical. Adapt if your user is something else, such as `p4admin`. In modern installations, the default home directory is `/home/perforce`, though in some installations the home directory is `/p4`. In either case, this does not need to be changed during the upgrade process. == Upgrade Procedure After <<Planning>>, the SDP procedure can be planned in detail. The procedure is broken into 3 phases, Preparation, Execution, and PostOp. Preparation steps can be done in a non-disruptive manner on a production server ahead of the Execution. Execution steps are generally performed in a scheduled maintenance window. PostOp steps are done some time after the upgrade is complete, perhaps days or weeks later. === Preparation Preparation steps are: 1. Acquire Downloads. 2. Deploy new SDP common files. 3. Generate new SDP config files. 4. Configure new SDP instance bin files and symlinks. 5. Determine Metadata Symlink Type (Fixed or Variable) 6. Account for customization (if any) ==== Acquire Downloads Download the latest SDP tarball release from this link: https://swarm.workshop.perforce.com/projects/perforce-software-sdp/download/downloads/sdp.Unix.tgz. Copy the downloaded tarball to the machine and put it in `/hxdepots/sdp.Unix.tgz`. (If a file with the same name exists from a previous upgrade, move it aside first.) ==== Deploy new SDP common files mkdir /hxdepots/new cd /hxdepots/new tar -xzf /hxdepots/sdp.Unix.tgz cat sdp/Version Verify that the contents of the `Version` file are as expected. ==== Generate new SDP config files __EDITME__ WARNING: The SDP config files sometimes contain local custom modifications made by administrators. Often the need for customization goes away with new SDP versions. However, when generating new config files, be sure to review old files for any custom values. ==== Configure new SDP instance bin files and symlinks. __EDITME__ ==== Determine Your Metadata Symlink Type (Fixed or Variable) Login as the `perforce` operating system user, and run this command: [source,bash] ---- ls -l /p4/1/root /p4/1/offline_db ---- The `root` and `offline_db` will be symlinks. Depending on how old the SDP is, the structure will either be _fixed_ or _variable_ metadata symlinks. Determine which you have. *Variable Metadata Symlink References* If one of the symlinks points to a directory ending in `db1`, and the other in `db2` (it doesn’t matter which is pointing to which), you have *variable metadata symlinks*. *Fixed Metadata Symlink References* If the target of the `root` and `offline_db` symlinks points to directories ending in the same names, i.e. `root` and `offline_db`, then you have *fixed metadata symlinks.* ==== Upgrade *_init scripts The format of SDP init scripts may have changed since your legacy version. Check them to see if they need to be modified. For each instance, look in the `/p4/N/bin` folder, and review the scripts. Compare them to templates in `/p4/common/etc/init.d`. For example, compare `/p4/1/bin/p4d_1_init` with `/p4/common/etc/init.d/p4d_instance_init.template`. If your current init scripts look _exactly_ like the templates, except for subsitutions of any `REPL_*` strings from the template, then they do not need to be updated. Older SDP versions had more complex `*_init` scripts. If they need to be replaced, plan to do so during your upgrade with steps like these samples: ``` cd /p4/N/bin mkdir OLD_DELETE_ME_LATER mv p4d_N_bin OLD_DELETE_ME_LATER/. sed s:REPL_SDP_INSTANCE:N:g /p4/common/etc/init.d/p4d_instance_init.template > p4d_N_init chmod +x p4d_N_init ``` If there are `p4broker_N_init`, `p4d_N_init`, and/or `p4dtg_N_init` scripts, follow the same procedure for those, generating new init scripts from the templates. These steps can only be executed after the `/p4/common` folder has been updated. ==== Review systemd service files The format of Systemd service files (sometimes referred to as 'Unit' files) changed with the SDP 2020.1 release. As part of planning, it is helpful to identify if systemd is already in use, and which Perforce Helix services are managing with systemd. You can get a list of such services with: ls -ld /etc/systemd/system ls -lrt /etc/systemd/system/p4*.service If the `/etc/systemd/system` directory exists, then the Systemd init mechanism is available. On systems that use the Systemd init mechanism, we recommend using it. Once systemd is configured for any given service, the SDP requires using the systemd mechanism (i.e. the `systemctl` command) to start/stop Perfore Helix services (for safety and consistency of management). Depending on your SDP version and how it was installed, there may or may not already be `p4*.service` files. In any case, in the Execution phase below, new systemd `p4*.service` files will be put in place, which may be new or replace existing files. ==== Account for customization (if any) __EDITME__ === Execution This section outlines sample steps for executing an actual upgrade after <<Planning>> and <<Preparation>> have been completed. The following is typically performed in a scheduled maintenance window. Execution steps are: 1. Stop Services 2. Move Old SDP aside. 3. Upgrade Physical Structure 4. Put new SDP common files in place. 5. Put new SDP config files in place. 6. Put new SDP instance bin files in place. ==== Stop Services Stop the `p4d` service for all instances on this machine. Also stop all p4broker services running on this machine (if any). For this short maintenance, the broker cannot be left running (e.g. to broadcast a "Down For Maintenance (DFM)" message) because the structure change cannot be started until _all_ processes launched from the SDP directory structure have stopped. Sample commands: [source,bash] ---- p4d_1_init status p4d_1_init stop p4d_1_init status p4broker_1_init status p4broker_1_init stop p4broker_1_init status ---- The extra `status` are for situational awareness; and are not strictly necessary. ==== Move old SDP Aside __EDITME__ ==== Upgrade Physical Structure In this step, the physical structure of the upgrade is done for pre-2019.1 SDP. The structure of the SDP changed in the 2019.1 release, to increase performance and reduce complexit in post-failover operations. The following notes describe how to do an in-place conversion to the new structure. First, become familar with the Pre-2019.1 and 2019.1+ structures. *SDP Pre-2019.1 Structure:* * `/p4` is a directory on the operating system root voume, `/`. * `/p4/__N__` is a symlink to a directory is typically the mount point for a storage volume (`/hxdepots` by default). * `/p4/__N__` contains symlinks for `/hxdepots`, `/hxmetadata`, and `hxlogs`, as well as tickets and trust files. *SDP 2019.1+ Structure:* * `/p4` is a directory on the operating system root volume, `/`, (same as Pre-2019.1 Structure). * `/p4/__N__` is local directory on the operating system root volume, * `/p4/__N__` contains symlinks for `/hxdepots`, `/hxmetadata`, and `hxlogs`, as well as tickets and trust files (same as the Pre-2019.1 structure) * `/p4/__N__/bin` is local directory on the operating system root volume. The `bin` directory is the only actual directory in `/p4/__N__`; other items are files or symlinks to directories. The `verify_sdp.sh` script (included in the SDP starting with SDP 2019.1) give errors if the 2019.1+ SDP structure is not in place. Converting the SDP structure in-place to the new style requires downtime on the edge/replica of interest. While the downtime can be brief if only the SDP structure is changed, commonly the P4D is upgraded in the same maintenance window. If the P4D is pre-2019.1, a longer maintenance window will be required, depending on duration of checkpoints. Following is the procedure to upgrade the structure in-place on a machine. WARNING: In the following sample procedure, the default SDP instance name of `1` is used, and default mount point names are used. Adapt this to your environment by applying this procedure to each instance on any given machine. If you have multiple instances, apply this procedure for each instance, one at a time. ==== Replace Instance Symlink with Directory Move the instance symlink aside, and replace it with a regular directory. Then copy the `.p4*` files (e.g. `.p4tickets` and `.p4trust`) into the new directory. Sample commands: [source,bash] ---- cd /p4 mv 1 1.old_symlink mkdir 1 cd 1 cp -p /p4/1.old_symlink/.p4t* . ---- ==== Convert Fixed to Variable Metadata Symlinks If you have Fixed Metadata Symlinks, first convert them to to Variable Metadata Symlinks. If you already have Varialbe Metadata Symlinks, proceed to <<Replace Instance Symlink with Directory>> In this step, move the underlying directories that will be pointed to by the `root` and `offline_db` sylmink names, and move them to their `db1` and `db2` names. [source,bash] ---- mv /hxmetadata/p4/1/root /hxmetadata/p4/1/db1 mv /hxmetadata/p4/1/offline_db /hxmetadata/p4/1/db2 ---- ==== Replace Instance Symlink with Directory Next, recreate the same symlinks you see reported by the `ls` command: [source,bash] ---- ls -l /p4/1.old_symlink/* cd /p4/1 ln -s /hxmetadata/p4/1/db1 root ln -s /hxmetadata/p4/1/db2 offline_db ---- WARNING: Do not just copy the sample commands above. Pay close attention to the `ls` output, and make sure the `root` points to whatever it was pointing to before, either a directory ending in `db1` or `db2` (unless you just converted from Fixed Metadata Symlinks in STEP 4). Also confirm that `offline_db` and `root` aren't both pointing to the same directory; one should be pointing to `db1` and the other to `db2`. Then, create additional symlinks akin to whatever else is in `/p4/1.old_symlink` That should look something like this: [source,bash] ---- cd /p4/1 ln -s /hxdepots/p4/1/depots ln -s /hxdepots/p4/1/checkpoints ln -s /hxdepots/p4/1/checkpoints.YourEdgeServerID ln -s /hxlogs/p4/1/logs ln -s /hxlogs/p4/1/tmp ls -l ---- Next, create the `bin` directory, as a local directory and copy files to it: [source,bash] ---- mkdir bin cd bin cp /p4/1.old_symlink/bin/p4d_1_init . cp /p4/1.old_symlink/bin/p4broker_1_init . ln -s /p4/common/bin/p4broker_1_bin p4broker_1 ln -s /p4/common/bin/p4_bin p4_1 ---- Last, take a look at `/p4/1.old_symlink/bin/p4d_1` - that `p4d_1` will be either a tiny script or a symlink (depending on whether your p4d is case sensitive or not). If you server is case sensitive, it will be a symlink. If your server is case-insensitive, it will be a tiny script. If your server is case sensitive, create the symlink like this: [source,bash] ---- ln -s /p4/common/bin/p4d_1_bin p4d_1 ---- OR, if your server is case-sensitive, that p4d_1 will be a tiny script, so just copy it: [source,bash] ---- cp /p4/1.old_symlink/bin/p4d_1 . ---- Then, start your server again, and run the `verify_sdp.sh` script and confirm that it’s happy now. ==== Put new SDP common files in place. __EDITME__ ==== Put new SDP instance bin files in place. __EDITME__ ==== Upgrade systemd service files The format of systemd unit files changed with the SDP 2020.1 release. The service must be down when these until files are added, or existing ones. The SDP r20.1 release includes templates for System unit files in `/p4/common/etc/systemd/system`. These should be deployed on each machine that uses SDP, and for each Helix service (e.g. `p4d`, `p4broker`, `p4p`) within each SDP instance. For example, the following installs or replaces system Unit files for `p4d` and `p4broker` for SDP instance 1. These must be executed as `root` First, stop the services if they are running. systemctl stop p4d_1 p4broker_1 /p4/1/bin/p4d_1_init stop /p4/1/bin/p4broker_1_init stop Next, add/replace the *.service files: cd /etc/systemd/system sed -e s:__INSTANCE__:1:g -e s:__OSUSER__:perforce:g /p4/common/etc/systemd/system/p4d_N.service.t > p4d_1.service sed -e s:__INSTANCE__:1:g -e s:__OSUSER__:perforce:g /p4/common/etc/systemd/system/p4broker_N.service.t > p4broker_1.service systemctl daemon-reload Enable and start the services. systemctl enable p4d_1 p4broker_1 systemctl start p4d_1 p4broker_1 Confirm that they are happy: systemctl status p4d_1 p4broker_1 === Post Operation Steps Cleanup steps can occur after the upgrade. In some cases cleanup is done immediately following the upgrade; in other cases it may be deferred by days or weeks. ==== Cleanup Temporary directories with DELETE_ME created durnig the upgrade procedure can now be deleted. [appendix] === Custom HMS Managed Installations If the Helix Management System (HMS) is used to manage this installation, you should have custom site-specific documentation for upgrading the SDP that supercedes this documentation. If the file `/p4/common/bin/hms` exists at your site, you have an HMS-managed site. Conact mailto:firstname.lastname@example.org[Perforce Consulting] for more information. Note that HMS solutions are inherently custom and not officially supported, but can be fully automated for global Helix Core topologies.
|#25||28837||tom_tyler||Updated docs for r22.1 release.|
Changed email address for Perforce Support.
#review-28772 @amo @robert_cowham
Updated :revnumber: and :revdate: fields for *.adoc files
|#22||28080||tom_tyler||Updated doc rev date for next release. Fixed a minor typo.|
|#21||27763||tom_tyler||Fix typo in SDP Legacy Upgrade Guide.|
Added Appendix C on Upgrades from the 2020.1 GA or earlier patches
to the current/latest release.
Refinements to @27712:
* Resolved one out-of-date file (verify_sdp.sh).
* Added missing adoc file for which HTML file had a change (WorkflowEnforcementTriggers.adoc).
* Updated revdate/revnumber in *.adoc files.
* Additional content updates in Server/Unix/p4/common/etc/cron.d/ReadMe.md.
* Bumped version numbers on scripts with Version= def'n.
* Generated HTML, PDF, and doc/gen files:
- Most HTML and all PDF are generated using Makefiles that call an AsciiDoc utility.
- HTML for Perl scripts is generated with pod2html.
- doc/gen/*.man.txt files are generated with .../tools/gen_script_man_pages.sh.
SDP Legacy Upgrade Guide doc updates:
* Customer feedback incorporated. THANK YOU!
* Added new 'Upgrade systemd service files' section.
* Cleaned up some incomplete text.
* Fixed typo 'MAILLOST' -> 'MAILLIST'.
* Added notes to crontab handling to deal with change from
daily_backup.sh to daily_checkpoint.sh and removal of
Updated SDP Legacy Upgrade Doc:
* Retitled 'Broker Config Files - Nothing to do' to drop the
'Nothing to do', since broker config files need to be moved from
/p4/N/bin for really old SDP installs. Added doc on what to do
* Fixed section numbering/indention level for sections
'Instance P4Review Scripts' and 'Broker Config Files'.
Updated SDP Legacy Upgrade Doc:
* Incorporated customer feedback and corrections. THANK YOU!
Updated SDP Legacy Upgrade Doc:
* Incorporated customer feedback and corrections. THANK YOU!
* Added Appendix B on using DFM brokers during the legacy upgrade process.
Updated SDP Legacy Upgrade Doc:
* Incorporated customer feedback and corrections. THANK YOU!
* Added section for moving password files from legacy location.
* Added section for dealing with configurables.
|#13||27674||tom_tyler||Fixed typo in bullet list.|
Legacy Upgrade Guide doc updates:
* Added 'Put New SDP in Place' section.
* Added 'Set SDP Counters' section to set SDP_VERSION and SDP_DATE counters.
* Covered updating depot spec Map fields.
* Covered adding server.id files.
* Added missing content on putting new SDP directory in place.
SDP_Guide.Unix doc updates:
* Added Legacy Upgrade Scripts section w/clear_depot_Map_fields.sh.
Updated Makefile with new doc build dependencies.
Various updates to SDP Legacy Upgrade Guide for Unix, including
better organization, better coverage of procedures, and spell
|#10||27519||tom_tyler||Added warning about risk of human error while workikng on production servers.|
|#9||27498||tom_tyler||Legacy upgrade doc updates.|
|#8||27486||tom_tyler||Doc updates, WIP.|
|#7||27484||tom_tyler||More Legacy Upgrade doc refinements. WIP, skipping HTML/PDF gen.|
Refined legacy upgrade documentation, corrected typos.
Skipping doc regeneration as more updates are expected.
|#5||27320||tom_tyler||Updated Legacy Upgrade Guide doc.|
|#4||27279||tom_tyler||Refined Legacy Upgrade doc.|
Legacy Upgrade guide incremental improvement; added details for
replacing systemd unti files for SDP r20.1 upgrades.
|#2||27231||tom_tyler||WIP updates of SDP Legacy Upgrade Guide doc.|
Refactored SDP Legacy Upgrade content into a separate doc. The SDP
Guide will be remain comprehensive and cover how to upgrade the SDP
itself forwardm from the current version (2020.1) using the new,
p4d-like incremental upgrade mechanism.
The content for manual upgrade procedures needed to get older
SDP installations to 2020.1 is only useful until sites are on
2020.1. This content is extensive, narrowly focused, and of value
only once per installation, and thus the legacy upgrade content
is separated into its own document.
Regenerated work-in-progress HTML files for easier review.