#!/bin/bash #------------------------------------------------------------------------------ # Copyright (c) Perforce Software, Inc., 2007-2014. All rights reserved # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # 1 Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL PERFORCE # SOFTWARE, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON # ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR # TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH # DAMAGE. #------------------------------------------------------------------------------ #============================================================================== # Declarations and Environment # Allow override of P4U_HOME, which is set only when testing P4U scripts. export P4CBIN=${P4CBIN:-/p4/common/bin} export P4U_HOME=${P4U_HOME:-/p4/common/bin} export P4U_LIB=${P4U_LIB:-/p4/common/lib} export P4U_ENV=$P4U_LIB/p4u_env.sh export P4U_LOG="/p4/1/tmp/install_sdp_python.sh.$(date +'%Y%m%d-%H%M%S').log" export VERBOSITY=${VERBOSITY:-3} export PATH=.:$PATH # Environment isolation. For stability and security reasons, prepend # PATH to include dirs where known-good scripts exist. # known/tested PATH and, by implication, executables on the PATH. export PATH=$P4U_HOME:$PATH:~/bin:. export P4CONFIG=${P4CONFIG:-.p4config} [[ -r "$P4U_ENV" ]] || { echo -e "\nError: Cannot load environment from: $P4U_ENV\n\n" exit 1 } source $P4U_ENV source $P4U_LIB/libcore.sh source $P4U_LIB/libp4u.sh declare Version=1.3.5 declare -i SilentMode=0 #============================================================================== # Local Functions #------------------------------------------------------------------------------ # Function: terminate function terminate { # Disable signal trapping. trap - EXIT SIGINT SIGTERM # Don't litter. cleanTrash vvmsg "$THISSCRIPT: EXITCODE: $OverallReturnStatus" # Stop logging. [[ "${P4U_LOG}" == off ]] || stoplog # With the trap removed, exit. exit $OverallReturnStatus } #------------------------------------------------------------------------------ # Function: usage (required function) # # Input: # $1 - style, either -h (for short form) or -man (for man-page like format). #------------------------------------------------------------------------------ function usage { declare style=${1:--h} echo "USAGE for $THISSCRIPT v$Version: $THISSCRIPT [-R rel] [-P python_rel] [-r python_root] [-f] [-d downloads_dir] [-w work_dir] [-L <log>] [-si] [-v<n>] [-n] [-D] or $THISSCRIPT [-h|-man] " if [[ $style == -man ]]; then echo -e " DESCRIPTION: This builds installs and compiles Python, the Perforce API, and P4Python. PLATFORM SUPPORT: This works on Red Hat Linux and CentOS platforms. It works on CentOS 6.4 and 6.5 and likely on other Linux derivatives with no modification. It currently supports only the bin.linux26_64 (Linux) and bin.darwin90x86_64 (Mac OSX/Darwin) architectures. REQUIREMENTS: The Perforce Server Deployment Packge (Rev SDP/Unix/2014.2+) must be installed and configured. In particular the SDP Environment file [$SDPEnvFile] must define a value for OSUSER. Development utilities such as 'make' and the 'gcc' compiler must be installed and available in the PATH. The 'wget' utility must be installed and available in the PATH. (Note that 'wget' is not installed with OSX by default, at least not os of OSX 10.9/Mavericks. However, it can be acquired and compiled using XCode). OPTIONS: -R rel Specify the Perforce release, e.g. r14.2. The default is r14.1. This is used for both the Perforce API and P4Python. -P python_rel Specify the Python release, e.g. 3.4.1. The default is 3.3.5. -r python_root Specify the python root. The default is $PythonRoot This can be used doing a dry run of an an installation. It should not be used for a production install, since the SDP environment file, /p4/common/bin/p4_vars, defines the default Python root in the PATH. -f Specify -f (force) to re-install the SDP pythin if it is already installed. By default, in will be installed only if the Python root dir (see -r) does not exist. -w work_dir Specify the working dir. By default, a temporary working directory is created under $Tmp, with a random name. This temporary working directory can be removed upon successful completion. -d downloads_dir Specify a directory to use to find downloads. The default is: $DownloadsDir The downloads directory is checked for these needed tarfiles: $PythonTarFile $P4APITarFile $P4PythonTarFile -v<n> Set verbosity 1-5 (-v1 = quiet, -v5 = highest). -L <log> Specify the path to a log file, or the special value 'off' to disable logging. By default, all output (stdout and stderr) goes to: $(dirname ${P4U_LOG}). NOTE: This script is self-logging. That is, output displayed on the screen is simultaneously captured in the log file. Do not run this script with redirection operators like '> log' or '2>&1', and do not use 'tee.' -si Operate silently. All output (stdout and stderr) is redirected to the log only; no output appears on the terminal. This cannot be used with '-L off'. -n No-Op. Prints commands instead of running them. -D Set extreme debugging verbosity. HELP OPTIONS: -h Display short help message -man Display man-style help message FILES: EXAMPLES: SEE ALSO: " fi exit 1 } #============================================================================== # Command Line Processing declare -i shiftArgs=0 declare -i Force=0 #declare -i KeepWorkingDir=0 declare -i KeepWorkingDir=1 declare PythonRoot=/p4/common/python declare Tmp=${P4TMP:-/p4/1/tmp} declare WorkingDir=$Tmp/isp.$$.$RANDOM declare DownloadsDir=$Tmp/downloads declare PerforceRel=r14.2 declare PythonRel=3.4.2 declare PythonTarFile= declare P4APITarFile=p4api.tgz declare P4PythonTarFile=p4python.tgz declare BuildDir= declare APIDir= declare ApiArch= declare RunUser= declare RunArch=x86_64 declare SDPEnvFile=/p4/common/bin/p4_vars declare ThisArch= declare ThisOS= set +u while [[ $# -gt 0 ]]; do case $1 in (-R) PerforceRel=$2; shiftArgs=1;; (-R) PythonRel=$2; shiftArgs=1;; (-r) PythonRoot=$2; shiftArgs=1;; (-f) Force=1;; (-w) if [[ ${2^^} == KEEP ]]; then KeepWorkingDir=1 else WorkingDir=$2 KeepWorkingDir=1 fi ;; (-d) DownloadsDir=$2; shiftArgs=1;; (-h) usage -h;; (-man) usage -man;; (-v1) export VERBOSITY=1;; (-v2) export VERBOSITY=2;; (-v3) export VERBOSITY=3;; (-v4) export VERBOSITY=4;; (-v5) export VERBOSITY=5;; (-L) export P4U_LOG=$2; shiftArgs=1;; (-si) SilentMode=1;; (-n) export NO_OP=1;; (-D) set -x;; # Debug; use 'set -x' mode. (*) usageError "Unknown arg ($1).";; esac # Shift (modify $#) the appropriate number of times. shift; while [[ $shiftArgs -gt 0 ]]; do [[ $# -eq 0 ]] && usageError "Bad usage." shiftArgs=$shiftArgs-1 shift done done set -u [[ $KeepWorkingDir -eq 0 ]] && GARBAGE+="$WorkingDir" PythonTarFile=Python-$PythonRel.tgz #============================================================================== # Command Line Verification [[ $SilentMode -eq 1 && $P4U_LOG == off ]] && \ usageError "Cannot use '-si' with '-L off'." #============================================================================== # Main Program trap terminate EXIT SIGINT SIGTERM declare -i OverallReturnStatus=0 [[ ! -d $Tmp ]] && bail "Missing SDP tmp dir [$Tmp]. Aborting." if [[ "${P4U_LOG}" != off ]]; then touch ${P4U_LOG} || bail "Couldn't touch log file [${P4U_LOG}]." # Redirect stdout and stderr to a log file. if [[ $SilentMode -eq 0 ]]; then exec > >(tee ${P4U_LOG}) exec 2>&1 else exec >${P4U_LOG} exec 2>&1 fi initlog fi if [[ ! -r "$SDPEnvFile" ]]; then bail "Missing or unreadable SDP Environment File [$SDPEnvFile]. Aborting." fi RunUser=$(grep '^export OSUSER=' /p4/common/bin/p4_vars |\ tail -1 | cut -d '=' -f 2) RunUser=$(echo $RunUser) if [[ -n "$RunUser" ]]; then msg "The OSUSER defined in the SDP environment file is $RunUser." else bail "Could not detect OSUSER in SDP environment file [$SDPEnvFile]. Aborting." fi if [[ $USER == $RunUser ]]; then msg "Verified: Running as $USER." else bail "Running as $USER. Run this only as the OSUSER [$RunUser] defined in the SDP Environment File [$SDPEnvFile]. Aborting." fi msg "Starting $THISSCRIPT v$Version at $(date) with command line:\n\t$CMDLINE\n\n" msg "Verifying dependencies." [[ -z "$(which gcc 2>/dev/null)" || -z "$(which g++ 2>/dev/null)" ]] && \ bail "No gcc found in the path. You may need to install it. Please\n check that the gcc.x86_64 and gcc-c++.x86_64 packages are\n installed, e.g. with:\n\tyum install -y gcc.x86_64 gcc-c++.x86_64\n\n" [[ -z "$(which wget 2>/dev/null)" ]] && \ bail "No wget found in the path. You may need to install it. Please check that the wget.x86_64 packages is installed, e.g. with:\n\tyum install -y wget.x86_64\n\n" ThisArch=$(uname -m) if [[ $ThisArch == $RunArch ]]; then msg "Verified: Running on a supported architecture [$ThisArch]." ThisOS=$(uname -s) ApiArch=UNDEFINED_API_ARCH case $ThisOS in (Darwin) ApiArch="darwin90x86_64";; (Linux) ApiArch="linux26x86_64";; (*) bail "Unsupported value returned by 'uname -m': $ThisOS. Aborting.";; esac else bail "Running on architecture $ThisArch. Run this only on hosts with '$RunArch' architecture. Aborting." fi if [[ -d $PythonRoot ]]; then if [[ $Force -eq 0 ]]; then bail "The SDP Python root directory exists: [$PythonRoot]. Aborting." else runCmd "/bin/rm -rf $PythonRoot" || bail "Could not remove SDP Python root dir [$PythonRoot]. Aborting." runCmd "/bin/mkdir -p $PythonRoot" || bail "Could not recreate SDP Python Root [$PythonRoot]. Aborting." fi fi if [[ ! -d $WorkingDir ]]; then runCmd "/bin/mkdir -p $WorkingDir" || bail "Could not create working dir [$WorkingDir]." fi if [[ ! -d $DownloadsDir ]]; then runCmd "/bin/mkdir -p $DownloadsDir" || bail "Could not create downloads dir [$DownloadsDir]." fi cd "$DownloadsDir" || bail "Could not cd to [$DownloadsDir]." msg "Downloading dependencies to $DownloadsDir." if [[ ! -r $PythonTarFile ]]; then runCmd "wget -q --no-check-certificate http://www.python.org/ftp/python/$PythonRel/$PythonTarFile" ||\ bail "Could not get $PythonTarFile." else msg "Skipping download of existing $PythonTarFile file." fi if [[ ! -r $P4APITarFile ]]; then runCmd "wget -q ftp://ftp.perforce.com/perforce/$PerforceRel/bin.$ApiArch/$P4APITarFile" ||\ bail "Could not get file '$P4APITarFile' $Rel" else msg "Skipping download of existing $P4APITarFile file." fi if [[ ! -r $P4PythonTarFile ]]; then runCmd "wget -q ftp://ftp.perforce.com/perforce/$PerforceRel/bin.tools/$P4PythonTarFile" ||\ bail "Could not get file '$P4PythonTarFile'" else msg "Skipping download of existing p4python.tgz file." fi cd "$WorkingDir" || bail "Could not cd to working dir [$WorkingDir]." BuildDir=$(tar -tzf $DownloadsDir/$PythonTarFile|head -1|cut -d '/' -f1) runCmd "tar -xzpf $DownloadsDir/$PythonTarFile" cd "$BuildDir" || bail "Could not cd to build dir [$BuildDir]." configureScript=$PWD/tmp.configure.python.sh echo -e "#\!/bin/bash\n\n$PWD/configure --prefix=$PythonRoot < /dev/null > $PWD/configure_with_prefix.log 2>&1\n\nexit $?\n" > $configureScript chmod +x $configureScript echo -e "Running this configure script:\n$(cat $configureScript)\n" $configureScript || bail "Failed to configure Python." echo "Building and installing python to $PythonRoot." echo "make install, logging to $PWD/make_install.log." make install > make_install.log 2>&1 cd "$WorkingDir" || bail "Could not cd to working dir [$WorkingDir]." APIDir=$PWD/$(tar -tf $DownloadsDir/$P4APITarFile|head -1|cut -d '/' -f1) runCmd "tar -xzpf $DownloadsDir/$P4APITarFile" BuildDir=$(tar -tzf $DownloadsDir/$P4PythonTarFile|head -1|cut -d '/' -f1) runCmd "tar -xzpf $DownloadsDir/$P4PythonTarFile" cd "$BuildDir" || bail "Could not cd to build dir [$BuildDir]." echo "Building P4Python, logging to $PWD/build.log" echo $PythonRoot/bin/python3 setup.py build --apidir $APIDir $PythonRoot/bin/python3 setup.py build --apidir $APIDir > build.log 2>&1 ||\ bail "Failed to build P4Python. Review the log: $PWD/build.log." echo "Installing P4Python, logging to $PWD/install.log" echo $PythonRoot/bin/python3 setup.py install --apidir $APIDir $PythonRoot/bin/python3 setup.py install --apidir $APIDir > install.log 2>&1 ||\ bail "Failed to install P4Python. Review the log: $PWD/install.log." msg "Add this to your PATH: $PythonRoot/bin" if [[ $OverallReturnStatus -eq 0 ]]; then msg "${H}\nSuccess. P4Python is ready.\n" else msg "${H}\nProcessing completed, but with errors. Scan above output carefully.\n" fi # Illustrate using $SECONDS to display runtime of a script. msg "That took about $(($SECONDS/3600)) hours $(($SECONDS%3600/60)) minutes $(($SECONDS%60)) seconds.\n" # See the terminate() function, which is really where this script exits. exit $OverallReturnStatus
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#20 | 27331 | C. Thomas Tyler |
Released SDP 2020.1.27325 (2021/01/29). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#19 | 25245 | C. Thomas Tyler |
Released SDP 2019.1.25238 (2019/03/02). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#18 | 22685 | Russell C. Jackson (Rusty) | Update main with current changes from dev. | ||
#17 | 22185 | C. Thomas Tyler |
Released SDP 2017.2.22177 (2017/05/17). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#16 | 21483 | C. Thomas Tyler |
Released SDP 2016.2.21480 (2017/01/11). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#15 | 21467 | C. Thomas Tyler |
Changed direction with regard to building P4Python with SSL due to enhancements in P4Python itself. We no longer need to do anything special to enabled SSL support in P4Python; we just build with available directories. By-passing pre-commit review for this. #review-21468 |
||
#14 | 21244 | C. Thomas Tyler |
Released SDP 2016.2.21239 (2016/12/06). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#13 | 21176 | C. Thomas Tyler |
Enhanced SDP Python installer to 'http:' protocol in place of 'ftp:' in URL references. This works around a problem I encountered with outbound 'ftp' being blocked by some corporate firewall (not the local machine firewall). Using 'http:' in the URL works just as well for the purposes of this script. Enhanced SDP Perl installer in the same way, but the SDP Perl is broken now for unrelated reasons. |
||
#12 | 20767 | C. Thomas Tyler |
Released SDP 2016.2.20755 (2016/09/29). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#11 | 20353 | C. Thomas Tyler |
Released SDP 2016.1.20348. Copy Up using 'p4 copy -r -b perforce_software-sdp-dev', with selective removal of changes related to work-in-progress changes. |
||
#10 | 18961 | C. Thomas Tyler | Released: SDP/MultiArch/2016.1/18958 (2016/04/08). | ||
#9 | 16526 | C. Thomas Tyler | Upgraded Python version from 3.3.6 to 3.5.0. | ||
#8 | 16524 | C. Thomas Tyler | Updated to support new standard -V (show version innfo) flag. | ||
#7 | 15843 | C. Thomas Tyler | Fixed typos in copyright message. | ||
#6 | 15833 | C. Thomas Tyler |
Replaced the big license comment block with a shortened form referencing the LICENSE file included with the SDP package. Doc and Copyright/LICENSE updates for install_sdp_(perl|python).sh. Update copyright year in the LICENSE file. #review |
||
#5 | 13937 | C. Thomas Tyler | Pushing SDP 2015.1.13934. | ||
#4 | 13908 | C. Thomas Tyler | Pushing SDP 2015.1.13906. | ||
#3 | 10962 | C. Thomas Tyler |
Copy-up from dev to main. install_sdp_python.sh v1.3.5: * Updated P4API, P4Python, and Python versions. * Cosmetic fixes. |
||
#2 | 10643 | C. Thomas Tyler |
Promoted install_sdp_python.sh v1.3.2 from dev branch. Very minor typo fixes; no functional changes. |
||
#1 | 10639 | C. Thomas Tyler |
Added script to install Python and P4Python in a standard SDP locations, /p4/common/python. Installation to this location requires only access by the 'perforce' user; 'root' access is not required. |