USAGE for mkdirs.sh v4.8.4: mkdirs.sh <instance> [-s <ServerID>] [-t <ServerType>] [-tp <TargetPort>] [-lp <ListenPort>] [-I <svc>[,<svc2>]] [-MDD /bigdisk] [-MLG /jnl] [-MDB1 /db1] [-MDB2 /db2] [-f] [-p] [-test [-clean]] [-n] [-L <log>] [-d|-D] or mkdirs.sh [-h|-man] DESCRIPTION: == Overview == This script initializes an SDP instance on a single machine. This script is intended to support two scenarios: * First time SDP installation on a given machine. * Adding new SDP instances (separate Helix Core data sets) to an existing SDP installation on a given machine. And SDP instance is a single Helix Core data set, with its own unique set of one set of users, changelist numbers, jobs, labels, versioned files, etc. An organization may run a single instance or multiple instances. This is intended to be run either as root or as the operating system user account (OSUSER) that p4d is configured to run as, typically 'perforce'. It should be run as root for the initial install. Subsequent additions of new instances do not require root. == Directory Structure == If an initial install as done by a user other than root, various directories must exist and be writable and owned by 'perforce' before starting: * /p4 * /hxdepots * /hxlogs * /hxmetadata The directories starting with '/hx' are configurable. This script creates an init script in the /p4/N/bin directory. == Crontab == Crontabs are generated for all server types except p4broker. After running this script, set up the crontab based on templates generated as /p4/common/etc/cron.d. For convenience, a sample crontab is generated for the current machine as /p4/p4.crontab.<SDPInstance> (or /p4/p4.crontab.<SDPInstance>.new if the former name exists). These files should be copied or merged into any existing files named with this convention: /p4/common/etc/cron.d/crontab.<osuser>.<host> where <osuser> is the user that services run as (typically 'perforce'), and <host> is the short hostname (as returned by a 'hostname -s' command). REQUIRED PARAMETERS: <instance> Specify the SDP instance name to add. This is a reference to the Perforce Helix Core data set. OPTIONS: -s <ServerID> Specify the ServerID, overriding the REPLICA_ID setting in the configuration file. -S <TargetServerID> Specify the ServerID of the P4TARGET of the server being installed. Use this only when setting up an HA replica of an edge server. -t <ServerType> Specify the server type, overriding the SERVER_TYPE setting in the config file. Valid values are: * p4d_master - A master/commit server. * p4d_replica - A replica with all metadata from the master (not filtered in any way). * p4d_filtered_replica - A filtered replica or filtered forwarding replica. * p4d_edge - An edge server. * p4d_edge_replica - Replica of an edge server. If used, '-S <TargetServerID>' is required. * p4broker - An SDP host running only a standalone p4broker, with no p4d. * p4proxy - An SDP host running only a standalone p4p with no p4d. -tp <TargetPort> Specify the target port. Use only if ServerType is p4proxy and p4broker. -lp <ListenPort> Specify the listen port. Use only if ServerType is p4proxy and p4broker. -I [<svc>[,<svc2>]] Specify additional init scripts to be added to /p4/<instance>/bin for the instance. By default, the p4p service is installed only if '-t p4proxy' is specified, and p4dtg is never installed by default. Valid values to specify are 'p4p' and 'dtg' (for the P4DTG init script). If services are not installed by default, they can be added later using templates in /p4/common/etc/init.d. Also, templates for systemd service files are supplied in /p4/common/etc/systemd/system. -MDD /bigdisk -MLG /jnl -MDB1 /db1 -MDB2 /db2 Specify the '-M*' to specify mount points, overriding DD/LG/DB1/DB2 settings in the config file. Sample: -MDD /bigdisk -MLG /jnl -MDB1 /fast If -MDB2 is not specified, it is set the the same value as -MDB1 if that is set, or else it defaults to the same default value as DB1. -f Specify -f 'fast mode' to skip chown/chmod commands on depot files. This should only be used when you are certain the ownership and permissions are correct, and if you have large amounts of existing data for which the chown/chmod of the directory tree would be slow. -p Specify '-p' to halt processing after preflight checks are complete, and before actual processing starts. By default, processing starts immediately upon successful completion of preflight checks. -L <log> Specify the path to a log file, or the special value 'off' to disable logging. By default, all output (stdout and stderr) goes to this file in the current directory: mkdirs.<instance>.<datestamp>.log NOTE: This script is self-logging. That is, output displayed on the screen is simultaneously captured in the log file. Do not run this script with redirection operators like '> log' or '2>&1', and do not use 'tee'. DEBUGGING OPTIONS: -test Specify '-test' to execute a simulated install to /tmp/p4 as the install root (rather than /p4), and with the mount point directories specified in the configuration file prefixed with /tmp/hxmounts, defaulting to: * /tmp/hxmounts/hxdepots * /tmp/hxmounts/hxlogs * /tmp/hxmounts/hxmetadata -clean Specify '-clean' with '-test' to clean up from prior test installs, which will result in removal of files/folders installed under /tmp/hxmounts and /tmp/p4. Do not specify '-clean' if you want to test a series of installs. -n No-Op. In No-Op mode, no actions that affect data or structures are taken. Instead, commands that would be run are displayed. This is an alternative to -test. Unlike '-p' which stops after the preflight checks, with '-n' more processing logic can be exercised, with greater detail about what commands that would be executed without '-n'. -d Increase verbosity for debugging. -D Set extreme debugging verbosity, using bash '-x' mode. Also implies -d. HELP OPTIONS: -h Display short help message -man Display man-style help message FILES: The mkdirs.sh script uses a configuration file for many settings. A sample file, mkdirs.cfg, is included with the SDP. After determining your SDP instance name (e.g. '1' or 'abc'), create a configuration file for it named mkdirs.<N>.cfg, replacing 'N' with your instance. Running 'mkdirs.sh N' will load configuration settings from mkdirs.N.cfg. UPGRADING SDP: This script can be useful in testing and upgrading to new versions of the SDP, when the '-test' flag is used. EXAMPLES: Example 1: Setup of first instance Setup of the first instance on a machine using the default instance name, '1', executed after using sudo to become root: $ sudo su - $ cd /hxdepots/sdp/Server/Unix/setup $ vi mkdirs.cfg # Adjust settings as desired, e.g P4PORT, P4BROKERPORT, etc. $ ./mkdirs.sh 1 A log will be generated, mkdirs.1.<timestamp>.log Example 2: Setup of additional instance named 'abc'. Setup a second instance on the machine, which will be a separate Helix Core instance with its own P4ROOT, its own set of users and changelists, and its own license file (copied from the master instance). Note that while the first run of mkdirs.sh on a given machine should be done as root, but subsequent instance additions should be done as the 'perforce' user (or whatever operating system user accounts Perforce Helix services run as). $ sudo su - perforce $ cd /hxdepots/sdp/Server/Unix/setup $ cp -p mkdirs.cfg mkdirs.abc.cfg $ vi mkdirs.abc.cfg # Adjust settings in mkdirs.abc.cfg as desired, e.g P4PORT, P4BROKERPORT, etc. $ ./mkdirs.sh abc A log will be generated, mkdirs.abc.<timestamp>.log Example 3: Setup of additional instance named 'alpha' to run a standalone p4p: $ ./mkdirs.sh alpha -t p4proxy Example 4: Setup of a stand instance named '1' to run a standalone p4broker: $ ./mkdirs.sh 1 -t p4broker
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#14 | 30915 | C. Thomas Tyler |
Released SDP 2024.1.30913 (2024/11/20). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#13 | 30388 | C. Thomas Tyler |
Released SDP 2024.1.30385 (2024/06/11). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#12 | 30043 | C. Thomas Tyler |
Released SDP 2023.2.30041 (2023/12/22). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#11 | 29701 | C. Thomas Tyler |
Released SDP 2023.1.29699 (2023/07/11). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#10 | 29623 | C. Thomas Tyler |
Released SDP 2023.1.29621 (2023/05/25). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#9 | 29401 | C. Thomas Tyler |
Released SDP 2022.2.29399 (2023/02/06). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#8 | 29205 | C. Thomas Tyler |
Released SDP 2022.1.29203 (2022/11/22). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#7 | 28412 | C. Thomas Tyler |
Released SDP 2021.2.28410 (2021/11/24). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#6 | 28240 | C. Thomas Tyler |
Released SDP 2021.1.28238 (2021/11/12). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#5 | 27901 | C. Thomas Tyler |
Released SDP 2020.1.27899 (2021/07/13). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#4 | 27822 | C. Thomas Tyler |
Released SDP 2020.1.27820 (2021/06/19). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#3 | 27761 | C. Thomas Tyler |
Released SDP 2020.1.27759 (2021/05/07). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#2 | 27400 | C. Thomas Tyler |
Released SDP 2020.1.27398 (2021/02/06). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
#1 | 27331 | C. Thomas Tyler |
Released SDP 2020.1.27325 (2021/01/29). Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'. |
||
//guest/perforce_software/sdp/dev/doc/gen/mkdirs.sh.man.txt | |||||
#7 | 27317 | C. Thomas Tyler | Updated generated script man pages. | ||
#6 | 27252 | C. Thomas Tyler | Updated generated script man pages. | ||
#5 | 27155 | C. Thomas Tyler | Updated generated script man pages. | ||
#4 | 27073 | C. Thomas Tyler | Updated generated script man pages. | ||
#3 | 27032 | C. Thomas Tyler | Updated generated script man pages. | ||
#2 | 27009 | C. Thomas Tyler | chmod +w | ||
#1 | 27006 | C. Thomas Tyler | Updated generated docs. |