#!/usr/bin/python # # CaseCheckTrigger.py # # # Copyright (c) 2008, Perforce Software, Inc. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL PERFORCE SOFTWARE, INC. BE LIABLE FOR ANY # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # $Id: //guest/robert_cowham/perforce/utils/triggers/CheckCaseTrigger.py#7 $ # # Example Usage: # CheckCaseTrigger change-submit //... "python CheckCaseTrigger.py %changelist% myuser=%user%" # assume user "perforce" has appropriate permissions and is logged in: # # checkcase change-submit //... "python c:\perforce\scripts\CheckCaseTrigger.py %changelist% port=%serverport% user=perforce" # # NOTE: 'mysuser' is only used to exclude the 'git-fusion-user' from this check. # Even if you are not using Git Fusion we recomend setting the trigger up this # way just in case you install Git Fusion in future. # # Sample output: # # Submit validation failed -- fix problems then use 'p4 submit -c 1234'. # 'CheckCaseTrigger' validation failed: # # Your submission has been rejected because the following files # are inconsistent in their use of case with respect to existing # directories # # Your file: '//depot/dir/test' # existing file/dir: '//depot/DIR' # # Note: This trigger requires P4Triggers.py and the P4Python API. # # from __future__ import print_function import P4 import P4Triggers import sys class CheckCaseTrigger(P4Triggers.P4Trigger): """CaseCheckTrigger is a subclass of P4Trigger. Use this trigger to ensure that your depot does not contain two filenames or directories that only differ in case. Having files with different case spelling will cause problems in mixed environments where both case-insensitive clients like Windows and case- sensitive clients like UNIX access the same server. """ def __init__(self, maxErrors, **kargs): kargs['charset'] = 'none' kargs['api_level'] = 71 fileFilter = None if 'filefilter' in kargs: fileFilter = kargs['filefilter'] del kargs['filefilter'] P4Triggers.P4Trigger.__init__(self, **kargs) # need to reset the args in case a p4config file overwrote them for (k,v) in kargs.items(): if k != "log": setattr(self.p4, k, v) self.map = None if fileFilter: try: with open(fileFilter) as f: self.map = P4.Map() for line in f: self.map.insert(line.strip()) except IOError: print >> self.log, "Could not open filter file %s" % fileFilter self.maxErrors = maxErrors self.depotCache = {} self.dirCache = {} self.fileCache = {} def setUp(self): info = self.p4.run_info()[0] if "unicode" in info and info["unicode"] == "enabled": self.p4.charset = "utf8" self.p4.exception_level = 1 # ignore WARNINGS like "no such file" self.p4.prog = "CheckCaseTrigger" self.USER_MESSAGE=""" Your submission has been rejected because the following files are inconsistent in their use of case with respect to existing directories """ self.BADFILE_FORMAT=""" Your file: '%s' existing file/dir: '%s' """ def validate(self): """Here the fun begins. This method overrides P4Trigger.validate()""" badlist = {} files = self.change.files self.filterRenames(files) for file in files: action = file.revisions[0].action if self.map and self.map.includes(file.depotFile): continue if not (action == "add" or action == "branch"): continue mismatch = self.findMismatch(file.depotFile) if mismatch: badlist[file.depotFile] = mismatch # end for if len(badlist) > 0: self.report(badlist) return len(badlist) == 0 # Method canonical # IN: string, utf8 compatible # OUT: unicode string, all lower case def canonical(self, aString): if self.p4.charset == "utf8": return unicode(aString, "utf8").lower() else: return aString.lower() # Method filterRenames: # Removes pairs of files that only differ in case # where one action is branch, and the other delete def filterRenames(self, files): branches = [x for x in files if x.revisions[0].action == 'branch'] deletes = [x.depotFile.lower() for x in files if x.revisions[0].action == 'delete'] for f in branches: if f.depotFile.lower() in deletes: files.remove(f) # This method returns either a depot or directory that differs from # the supplied path only in case, or None if no mismatch is found def findMismatch(self, path): path = path[2:] # cut the // at the beginning of the depot off dirs = path.split('/') depot = dirs.pop(0) file = dirs.pop() depotMismatch = self.findDepotMismatch(depot) if (depotMismatch): return depotMismatch oldDirs = dirs[:] dirMismatch = self.findDirMismatch('//' + depot, dirs) if (dirMismatch): return dirMismatch fileMismatch = self.findFileMismatch(depot, oldDirs, file) if (fileMismatch): return fileMismatch return None # This method looks for a depot mismatch # It caches the depots as it found them # IN: depot name (as provided by the change list # OUT: None if (no mismatch found) else (stored depot name) def findDepotMismatch(self, depot): canonicalDepot = self.canonical(depot) # if the depot is in the cache, the cached version is authorative if canonicalDepot in self.depotCache: if self.depotCache[canonicalDepot] == depot: return None else: return '//' + self.depotCache[canonicalDepot] # depot not found in cache. Populate the cache mismatch = None for d in self.p4.run_depots(): dname = d["name"] cd = self.canonical(dname) self.depotCache[cd] = dname if canonicalDepot == cd and depot != dname: mismatch = '//' + dname return mismatch # end findDepotMismatch # Look for matching or mismatching directories # Recursive algorithm, descending down the directory paths # Caching directories as we find them # def findDirMismatch(self, top, dirs): if len(dirs) == 0: return None aDir = dirs.pop(0) path = top + '/' + aDir cpath = self.canonical(path) if cpath in self.dirCache : # negative lookups are cached with the value set to False if (self.dirCache[cpath] == path) or (self.dirCache[cpath] == False): return self.findDirMismatch(path, dirs) else: # it is a mismatch, either with a previously stored name, or, worse # with a previous file in the same change list return self.dirCache [cpath] # end if # end if # so, it is not in the cache. Let's populate the cache and check # while we are at it mismatch = None for d in self.p4.run_dirs(top + "/*"): d = d["dir"] # result is in tagged mode, single entry "dir"=>directory name cd = self.canonical (d) self.dirCache[cd] = d if cd == cpath: # we found the dir entry. Is it the right case? if d == path: # so far so good, lets step one directory level down mismatch = self.findDirMismatch(path, dirs) else: # oh-ho, we found a mismatch mismatch = d # end if d == path # end if cd == cpath # end for if not mismatch: # enter as a negative match self.dirCache [cpath] = False return mismatch def findFileMismatch(self, depot, dirs, file): base = '//' + depot + '/' if (len(dirs) > 0): base += '/'.join(dirs) base += '/' name = base + file cname = self.canonical(name) if cname in self.fileCache: if (self.fileCache[cname] == name): return None # all is well, but cannot happen, add would fail else: return self.fileCache[cname] # so the file is not in the cache. Let's load the cache for f in self.p4.run_files(base + "*"): if "delete" not in f["action"]: f = f["depotFile"] cf = self.canonical(f) self.fileCache[cf] = f if (cf == cname and f != name): return f # so it is not in the file cache self.fileCache[cname] = name return None def report(self, badfiles): msg = self.USER_MESSAGE for (n, (file, mismatch)) in enumerate(badfiles.items()): if n >= self.maxErrors: break msg += self.BADFILE_FORMAT % (file, mismatch) self.message(msg) # main routine. # If called from the command line, go in here if __name__ == "__main__": kargs = {} try: for arg in sys.argv[2:]: (key, value) = arg.split("=") kargs[key] = value except Exception as e : print("Error, expecting arguments in form key=value. Bailing out ...") print(e) sys.exit(0) # Example of how to exclude the 'git-fusion-user' # Note: Need to remove 'mysuser' after test as it's not a valid P4 argument. if 'myuser' in kargs: if kargs['myuser'] == 'git-fusion-user': sys.exit(0) else: del kargs['myuser'] ct = CheckCaseTrigger(10, **kargs) sys.exit(ct.parseChange(sys.argv[1]))
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#7 | 19940 | Robert Cowham | Tabs->spaces, adjust some other whitespace | ||
#6 | 19939 | Robert Cowham | Update with latest changes by Sven etc. | ||
#5 | 8050 | Robert Cowham | P4Python 2009.1 | ||
#4 | 8049 | Robert Cowham |
Whitespace only change and comments. Made indents standard and removed tabs |
||
#3 | 8048 | Robert Cowham | Add comment about installing | ||
#2 | 8046 | Robert Cowham | Latest change from Sven | ||
#1 | 7531 | Robert Cowham | Personal branch | ||
//guest/sven_erik_knop/P4Pythonlib/triggers/CheckCaseTrigger.py | |||||
#4 | 7379 | Sven Erik Knop |
Added output to a log file. The default is the send output to p4triggers.log in the P4ROOT directory, this can be overridden with the parameter log=<path> Also, errors now cause the trigger to fail with sensible output first. |
||
#3 | 7372 | Sven Erik Knop |
Rollback Rename/move file(s). To folder "perforce" is needed. |
||
#2 | 7370 | Sven Erik Knop | Rename/move file(s) again - this time to the right location inside a perforce directory. | ||
#1 | 7367 | Sven Erik Knop | New locations for the Python triggers. | ||
//guest/sven_erik_knop/perforce/P4Pythonlib/triggers/CheckCaseTrigger.py | |||||
#1 | 7370 | Sven Erik Knop | Rename/move file(s) again - this time to the right location inside a perforce directory. | ||
//guest/sven_erik_knop/P4Pythonlib/triggers/CheckCaseTrigger.py | |||||
#1 | 7367 | Sven Erik Knop | New locations for the Python triggers. | ||
//guest/sven_erik_knop/triggers/CheckCaseTrigger.py | |||||
#3 | 7219 | Sven Erik Knop | First attempt for renamer support, not finished yet, therefore disabled. | ||
#2 | 7218 | Sven Erik Knop |
Updated CheckCaseTrigger.py to fix problems with files within directories. The trigger would not detect case problems for files that are located in subdirectories. Unintentional side effect of modifying the dirs list recursively when checking for mismatched directories. The solution was simple: make a copy of the directory list for the file check. |
||
#1 | 6413 | Sven Erik Knop |
Added some P4Python-based Perforce triggers. P4Triggers.py is the based class for change trigger in Python modelled on Tony Smith's Ruby trigger with the same name. CheckCaseTrigger.py is a trigger that ensures that no-one enters a file or directory with a name only differing by case from an existing file. This trigger is Unicode aware and uses Unicode-comparison of file names, so it can be used on nocase-Unicode based Perforce servers, which cannot catch the difference between, say, "�re" and "�re" at the moment. clienttrigger.py is a simple trigger that modifies the option "normdir" to "rmdir" for new client specs only. It is meant as a template to create more complex default settings like standard views. |