vcp #1

#!/usr/local/bin/perl -w

=head1 NAME

vcp - Copy versions of files between repositories and/or RevML

=head1 SYNOPSIS

   # interactive mode:

   vcp [vcp_opts]

   # scriptable command line mode:

   vcp [vcp_opts] <source> <dest>

   # getting options from a file:

   vcp vcp:config.vcp

   # help output:

   vcp help [topic]

   # documentation generation:

   vcp html <destination dir>

=head1 DESCRIPTION

C<vcp> ('version copy') copies versions of files from one repository to another,
translating as much metadata as possible along the way.  This allows you to
copy and translate files and their histories between revision storage systems.

Supported source and destination types are C<cvs:>, C<p4:>, and C<revml:>.

=head2 Copying Versions

The general syntax of the vcp command line is:

   vcp [<vcp options>] <source> <dest>

The three portions of the command line are:

=over

=item C<E<lt>vcp optionsE<gt>>

Command line options that control the operation of the C<vcp> command, like
C<-d> for debugging or C<-h> for help.  There are very few global options,
these are covered below. Note that they must come before the
C<E<lt>sourceE<gt>> specification.

=item C<E<lt>sourceE<gt>>

Were to extract versions from, including any command line options needed to
control what is extracted and how.  See the next section.

=item C<E<lt>destE<gt>>

Where to insert versions, including any command line options needed to control
how files are stored.  See the next section.

=back

=head2 Specifying Repositories

The C<E<lt>sourceE<gt>> and C<E<lt>destE<gt>> specifications specify a
repository and provide any options needed for accessing that repository.

These spefications may be a simple filename for reading or writing RevML
files (if the requisite XML handling modules are installed). or a full
repository specification like C<cvs:/home/cvs/root:module> or
C<p4:user:password@server:port://depot/dir>.

When using the long form to access a repository, C<E<lt>sourceE<gt>> and
C<E<lt>destE<gt>> specification have several fields delimited by C<:>
and C<@>, and may have trailing command line options.  The full (rarely
used) syntax is:

   scheme:user(view):password@repository:filespec [<options>]

where

=over

=item C<scheme:>

The repository type (C<p4:>, C<cvs:>, C<revml:>).

=item C<user>, C<view>, and C<password>

Optional values for authenticating with the repository and identifying which
view to use.  C<cvs> does not use C<view>.  For C<p4>, C<view> is the client
setting (equibalent to setting C<P4CLIENT> or using C<p4>'s C<-c> option).

=item C<repository>

The repository spec, CVSROOT for CVS or P4PORT for p4.

=item C<filespec>

Which versions of what files to move.  As much as possible, this spec is
similar to the native filespecs used by the repository indicated by the scheme.

=item C<E<lt>optionsE<gt>>

Command line options that usually mimic the options provided by the underlying
repositories' command line tools (C<cvs>, C<p4>, etc).

=back

Most of these fields are omitted in practice, only the C<scheme> field is
required, though (in most cases) the C<repository> field is also needed unless
you set the appropriate environment variables (C<CVSROOT>, C<P4PORT>, etc).

The a bit confusing, here are some examples specs:

   cvs:server:/foo
   p4:user@server://depot/foo/...
   p4:user:password@public.perforce.com:1666://depot/foo/...

Options and formats for of individual schemes can be found in the relevant
help topics, for instance:

   vcp help source::cvs

See C<vcp help> for a list of source and destination topics.

When reading and writing RevML files, a simple filename will do
(although the long form may also be used).  The special value "-" means
to read/write stdin and stdout when used as a source or destination
name, respectively.  "-" is assumed if a specification is not provided,
so these invocations all accomplish the same thing, reading and writing
RevML:

   vcp
   vcp -
   vcp revml:-
   vcp revml:
   vcp - -
   vcp - revml:-
   vcp - revml:
   vcp revml:- revml:-
   vcp revml: revml:

=head2 C<vcp> Options

All general options to vcp must precede the C<E<lt>sourceE<gt>>.
Scheme-specific options must be placed immediately after the
C<E<lt>sourceE<gt>> or C<E<lt>destE<gt>> spec and before the next one.

=over

=item --debug, -d

Enables logging of debugging information.

=item --help, -h, -?

These are all equivalent to C<vcp help>.

=item --output-config-file=$filename

Write the settings (parsed from the UI, the command line, or a config
file to a file.  Useful for capturing settings or user interface output.
Does not affect running.  Use "-" to emit to STDOUT.

B<NOTE 1>: This does I<not> emit an "Options:" section containing global
options (those listed here).  Almost all of these options are not useful
to emit; we can add an option to force their emission if need be.

B<NOTE 2>: When using the interactive user interface, this option takes
effect after the last interactive portion and, if vcp goes on to run a
conversion, before any conversion is run.  This occurs in addition to
any configuration files the user may ask the interactive interface to
write.  This may change in the future (for instance, if the interactive
dialog includes an option to extract and analyze metadata).  

=item --dont-convert

Do not run a conversion.  Useful when you just want to emit a .vcp file.

=item --terse, -t

Suppress verbose explanations when running the interactive UI.  Has
no effect on operation if all settings are read from the command line
or a .vcp file.

=back

=head2 Getting help

(See also L<Generating HTML Documentation|/Generating HTML Documentation>,
below).

There is a slightly different command line format for requesting help:

   vcp help [<topic>]

where C<E<lt>topicE<gt>> is the optional name of a topic.  C<vcp help> without
a C<E<lt>>topicC<E<gt>> prints out a list of topics, and C<vcp help vcp>
emits this page.

All help documents are also available as Unix C<man> pages and using the
C<perldoc> command, although the names are slightly different:

   with vcp               via perldoc        
   ================       ===========
   vcp help vcp           perldoc vcp
   vcp help source::cvs   perldoc VCP::Source::cvs
   vcp help source::cvs   perldoc VCP::Dest::p4

C<vcp help> is case insensitive, C<perldoc> and C<man> may or may not be
depending on your filesystem.  The C<man> commands look just like the example
C<perldoc> commands except for the command name.  Both have the advantage that
they use your system's configured pager if possible.

=head2 Environment Variables

The environment is often used to set context for the source and
destination by way of variables like P4USER, P4CLIENT, CVSROOT, etc.

=over

=item VCPDEBUG

The VCPDEBUG variable acts just like C<-d=$VCPDEBUG> was present on the
command line:

   VCPDEBUG=1

(see L<"--debug, -d"> for more info).  This is useful when VCP is
embedded in another application, like a makefile or a test suite.

=back

=head2 Generating HTML Documentation

All of the help pages in C<vcp> can be built in to an HTML tree with the
command:

   vcp html <dest_dir>

The index file will be C<E<lt>dest_dirE<gt>/index.html>.

=for test_scripts t/10vcp.t t/50revml.t

=for comment
t/50revml.t is used too so that we actually make sure that filenames get
passed through to the source (at least) properly.

=cut

use strict ;

BEGIN {
   $ENV{VCPDEBUG}   ||= grep /\A(-d|--debug)\z/, @ARGV;
   $ENV{VCPPROFILE} ||= grep /\A(--profile)\z/, @ARGV;
   if ( grep /\A(--diestack)\z/, @ARGV ) {
      $SIG{__DIE__} = sub {
         local $SIG{__DIE__} = 'DEFAULT';
         require Carp;
         Carp::confess( @_ );
      };
      @ARGV = grep ! /\A(--diestack)\z/, @ARGV;
   }
}

use VCP::Logger qw( lg pr BUG );
use VCP::Debug qw( :debug ) ;
use VCP::Utils qw( empty shell_quote program_name );
use Getopt::Long ;
use VCP ;

my $program_name = program_name;

my $terse_ui_prompts;   ## set from command line
my $output_config_file; ## Set from a command line.
my $dont_convert;

eval {
   my $dtd_spec ;
   my $arg;

   lg shell_quote( $program_name, @ARGV );

   my @plugins;

   ## Parse up to the first non-option, then let sources & dests parse
   ## from there.
   Getopt::Long::Configure( qw( no_auto_abbrev no_bundling no_permute ) ) ;
   parse_cli_options( \@ARGV );

   my $interactive_ui = !@ARGV;  ## will also be set later if 'edit' arg
   my $vcp_filename;  ## Set if we're to edit an existing file

   if ( !$interactive_ui ) {
      ## command line mode

      $arg = $ARGV[0];
      build_html_tree_and_exit( $program_name, @ARGV[1..$#ARGV] )
         if $arg eq "html";
      help_and_exit( @ARGV[1..$#ARGV] )
         if $arg eq 'help' ;

      my $vcp_spec;

      if ( $arg eq "scan" || $arg eq "filter" || $arg eq "transfer" ) {
         shift;
      }

      my @errors;

      if ( $arg eq "edit" ) {
         shift;
         $interactive_ui = 1;
         my $spec = shift;
         if ( empty $spec ) {
            push @errors, "edit requires a vcp configuration file name"
         }
         else {
            require VCP::ConfigFileUtils;
            ( $vcp_filename = $spec ) =~ s/^vcp://i;
            $vcp_spec = VCP::ConfigFileUtils::parse_config_file(
               $vcp_filename
            );
         }
      }
      else {
         ## See if it's a config file: look for vcp: or .vcp or even
         ## try sniffing it to see if it looks like one
         my $source_spec = $ARGV[0];

         require VCP::ConfigFileUtils;
         my $is_vcp_file =
            $source_spec =~ s/^vcp://i || $source_spec =~ /\.vcp\z/i;

         my $cant_be_vcp_file = ! $is_vcp_file && (
            $source_spec eq "-"   ## must be a revml file
            || $source_spec =~ /\.revml\z/i
            || $source_spec =~ /^\w{2,}:/ # ignore foo:, sniff C:
            || ! -e $source_spec
            || -S _ < 1_000_000       # That would be toooo big
         );

         $vcp_spec = $is_vcp_file
            ? VCP::ConfigFileUtils::parse_config_file( $source_spec )
            : ! $cant_be_vcp_file
               ? VCP::ConfigFileUtils::parse_config_file(
                  $source_spec,
                  "may not be a config file"
               )   # sniff the file, return FALSE if !vcp file
               : 0;

         if ( $vcp_spec ) {
            $vcp_filename = $source_spec;
            shift @ARGV;
         }
      };

      if ( $vcp_spec ) {
         ## It's a .vcp file parsed in to @$vcp_spec.
         if ( @$vcp_spec && $vcp_spec->[0] eq "options" ) {
            shift @$vcp_spec;
            parse_cli_options( shift @$vcp_spec );
         }

         push @errors, "$vcp_filename does not specify a Source\n"
            unless $arg eq "filter"
               || ( $vcp_spec && @$vcp_spec && $vcp_spec->[0] eq "source" );

         push @errors, "$vcp_filename does not specify a Destination\n"
            unless $arg eq "scan" || $arg eq "filter"
               || ( $vcp_spec && @$vcp_spec && $vcp_spec->[-2] eq "dest" );

         push @errors,
            "command line parameters not allowed when using config file: "
            . join( " ", @ARGV )
            . "\n"
            if @ARGV;

         while ( @$vcp_spec ) {
            my ( $tag, $value ) = ( shift @$vcp_spec, shift @$vcp_spec );

            my $default_scheme;
            my $type;
            my $spec;
            my $parms;
            # Unlike the command line, we know there *must* be a source
            # and a dest in @$vcp_spec.  Anything in between is filters.
            if ( $tag eq "source" || $tag eq "dest" ) {
               $default_scheme = "revml";
               $type = $tag;
               $spec = shift @$value;
            }
            else {
               $default_scheme = $tag;
               $type = "Filter";
               $spec = "";
            }

            push @plugins, load_module( $spec, $type, $default_scheme, $value );

            die "extra parameters for $tag: ", shell_quote( @$value ), "\n" 
               if @$value;
         }
      }
      else {
         ## Parse the command line.
         my $type = "Source";
         while ( @ARGV ) {
            my $spec = shift;

            my $default_scheme;
            if ( $type eq "Source" ) {
               $default_scheme = "revml";
            }
            elsif ( $type ne "Dest" && find_filter( $spec ) ) {
               ## It's a filter.
               $type = "Filter";
            }
            else {
               $type           = "Dest";
               $default_scheme = "revml";
            }

            ## We pass \@ARGV to the constructors for source and dest so
            ## that they may parse some of @ARGV and leave the rest.
            ## Actually, that's only important for sources, since the
            ## dests should consume it all anyway.  But, for
            ## consistency's sake, I do the same to both.
            push @plugins, load_module( $spec, $type, $default_scheme, \@ARGV );
            $type = "";

            ## Fake up a destination if none was passed.
            push( @ARGV, "revml:-" ), $type = "Dest"
               if ! @ARGV && ! $plugins[-1]->isa( "VCP::Dest" ) ;
         }

         push @errors, "extra parameters: " . join( ' ', @ARGV ) . "\n"
            if @ARGV;
      }


      if ( @errors ) {
         my $errors = join( '', @errors ) ;
         $errors =~ s/^/$program_name ERROR: /mg ;
         chomp $errors;
         die $errors, "\n" ;
      }
   }

   if ( $interactive_ui ) {
      ### interactive mode
      
      require VCP::UI;
      my $ui = VCP::UI->new( 
         defined $terse_ui_prompts ? ( TersePrompts => 1 ) : (),
      );

      print <<END_INTRO unless @plugins || defined $terse_ui_prompts;

This is vcp's text mode interactive user interface.  It asks a series of
questions and then allows you to save the answers in a configuration
file and/or do a conversion based on them.

After each question any example free-form input is shown in parentheses.
If a default value is available, that is shown in square brackets.  You
may press 'Enter' to accept the default.  For yes/no questions, 'y' or
'n' is sufficient.  For non-yes/no multiple choice questions, use the
number or enter the entire choice text.

vcp may also be provided with all the information it needs on the
command line or using a configuration file.  To read up on these
options, run "vcp help" from the command line after quitting the
interactive interface.

END_INTRO

      my ( $source, $dest, $do_convert );
      ( $source, $dest, $output_config_file, $do_convert ) = $ui->run(
         @plugins
            ? (
               Source   => $plugins[ 0],
               Dest     => $plugins[-1],
               Filename => $vcp_filename,
            )
            : ()
      );

      $dont_convert = 1 unless $do_convert;

      if ( ! @plugins ) {  ## None scanned from existing .vcp file
         push @plugins, $source;

         require VCP::DefaultFilters;
         my $df = VCP::DefaultFilters->new;
         my @filter_args = $df->create_default_filters( $source, $dest );

         # call load_module for each filter in @filter_args.
         while ( @filter_args ) {
            my $spec = shift @filter_args;

            my $default_scheme;
            if ( find_filter( $spec ) ) {
               push @plugins, load_module(
                  $spec, "Filter", undef, \@filter_args
               );
            }
            else {
               BUG "attempted to load a non-existent default filter: $spec";
            }
         }

         push @plugins, $dest;
      }
      else {
         $plugins[ 0] = $source;
         $plugins[-1] = $dest;
      }

   }

   if ( $arg eq "scan" ) {
      @plugins = (
         $plugins[0],
         load_module( "metadb:source_metadb:", "Dest", undef, [] ),
      );
   }
   elsif ( $arg eq "filter" ) {
      shift @plugins; ## filtering requires no source and no dest
      pop @plugins;
      pr "vcp: no filters to apply\n" unless @plugins;
      @plugins = (
         load_module( "metadb:source_metadb:", "Source", undef, [] ),
         @plugins,
         load_module( "metadb:filtered_metadb:", "Dest", undef, [] ),
      );
   }
   elsif ( $arg eq "transfer" ) {
      @plugins = (
         load_module( "metadb:filtered_metadb:", "Source", undef, [
            $plugins[0],
         ] ),
         $plugins[-1],
      );
   }

   if ( defined $output_config_file ) {
      require VCP::ConfigFileUtils;
      VCP::ConfigFileUtils::write_config_file( $output_config_file, @plugins );
   }

   unless ( $dont_convert ) {
      # init should:
      #   set default values don't make sense in the constructor
      #   do initialization that doesn't make sense in constructor
      #   do cross-checking between fields
      $_->init for @plugins;

      my $cp = VCP->new( @plugins );
      $cp->insert_required_sort_filter
         unless $arg eq "scan" || $arg eq "transfer";
      my $header = {} ;
      my $footer = {} ;
      $cp->copy_all( $header, $footer ) ;
   }

   1;

} or do {
   my $x = $@;
   lg $x;
   die $x;
};

###############################################################################
###############################################################################

sub parse_cli_options { 
   local *ARGV = shift @_;
   GetOptions(
      'debug|d'              => \my $unused_1_see_BEGIN_above,
      'dont-convert'         => \$dont_convert,
      'output-config-file=s' => \$output_config_file,
      'help|h|?:s'  => sub {
         help_and_exit( length $_[1] ? $_[1] : () );
      },
      'profile'              => \my $unused_2_see_BEGIN_above,
      'terse|t'              => \$terse_ui_prompts,
      'versions'             => \&versions_and_exit,
   ) or options_and_exit() ;

   die "--output-config-file requires a filename\n"
      if defined $output_config_file && ! length $output_config_file;
}


sub load_module {
   my ( $spec, $type, $default_scheme, @args ) = @_;

   $type = ucfirst $type;

   my $class = "VCP::$type";

   my ( $scheme, $s ) = $spec =~ /^(\w{2,}):/
      ? ( $1, $spec )
      : defined $default_scheme
         ? ( $default_scheme, "$default_scheme:$spec" )
         : die "vcp: '$spec' has no scheme, try ",
            list_modules( $class ),
            "\n";
   $scheme = lc($scheme);

   my $name = "${class}::$scheme";

   my $filename = $name ;
   $filename =~ s{::}{/}g ;

   my $v = eval "require '$filename.pm';" ;
   die "unknown \L$type\E scheme '$scheme:', try ",
      list_modules( $class ),
      "\n"
      if ! $v && $@ =~ /^Can't locate $filename.pm/ ;
   die $@ unless $v;

   lg "loaded '$name' from '", $INC{"$filename.pm"}, "'";

   # New should: 
   #   construct the object
   #   parse options, if preent     
   #   set some default values
   #   do some initialization       
   my $module = $name->new( $s, @args ) ;

   return $module;
}


{
   my $filters;
   sub find_filter {
      my $spec = shift;

      return(
         $spec =~ /\A(\w{2,}):/ ## filters *must* have a scheme
         && do {
            my $scheme = lc $1;
            $filters ||= {
               map { ( $_ => undef ) } scan_modules( "VCP::Filter" )
            };
            exists $filters->{$scheme};
         }
      );
   }
}

sub scan_modules {
   my ( $prefix ) = @_ ;

   my $dirname = $prefix . '::' ;
   $dirname =~ s{(::)+}{/}g ;

   my %seen ;
   require File::Spec;
   for ( @INC ) {
      my $dir = File::Spec->catdir( $_, $dirname ) ;
      opendir( D, $dir ) or next ;
      my @files = grep $_ !~ /^\.\.?$/ && s/\.pm$//i, readdir D ;
      closedir D ;
      $seen{$_} = 1 for @files ;
   }

   return keys %seen;
}


sub list_modules {
   my ( $prefix ) = @_ ;

   my $list = join ', ', map "$_:", scan_modules( @_ );
   $list =~ s/,([^,]*)$/ or$1/ ;
   return $list ;
}


sub usage_and_exit {
   require Pod::Usage ;
   lg @_;
   Pod::Usage::pod2usage( -message => shift, -verbose => 0, -exitval => 1 ) ;
}

sub options_and_exit {
   lg @_;
   require Pod::Usage ;
   print STDERR "\n";
   Pod::Usage::pod2usage( -verbose => 1, -exitval => 1, -output => \*STDERR ) ;
}


sub find_help_modules {
   my ( $desired_module ) = @_;

   require File::Find;
   require File::Spec;

   my %modules;

   for my $inc_dir ( @INC ) {
      $inc_dir = File::Spec->rel2abs( $inc_dir );

      my $vcp_file = File::Spec->catfile( $inc_dir, "VCP.pm" );
      $modules{VCP} ||= $vcp_file if -f $vcp_file;

      my $vcp_dir  = File::Spec->catdir(  $inc_dir, "VCP"    );
      next unless -d $vcp_dir;

      my @found;

      File::Find::find(
         sub {
            return if -d $_;
            return unless /\.(pm|pod)\Z/i;

            my $mod_name = File::Spec->abs2rel( $File::Find::name, $vcp_dir );

            $mod_name =~ s{[:\\/]+}{::}g;
            $mod_name =~ s{\.(pm|pod)}{}i;

            if ( defined $desired_module && lc $mod_name eq $desired_module ) {
               push @found, $File::Find::name;
            }
            else {
               $modules{$mod_name} ||= $File::Find::name;
            }

         },
         $vcp_dir
      );

      # .pod sorts after .pm, and we prefer to find the pod files, since
      # they are more likely to contain end user docs when both .pod
      # and .pm files exist.
      die "FOUND ", ( sort @found )[-1], "\n"
         if @found;
   }

   return %modules;
}


sub help_and_exit {
   require Pod::Usage ;

   my ( $topic ) = @_;

   my $result = 0;

   if ( defined $topic ) {
      $topic = lc $topic;

      if ( $topic eq "vcp" ) {
         if( $ENV{PAGER} ) {
            system( "pod2text '$0' |$ENV{PAGER}" );
         }
         else {
            system( "pod2text", $0 );
         }
         exit $result;
      }

      eval {
         find_help_modules( $topic );
      };
      if ( $@ =~ /FOUND (.*)/ ) {
         if( $ENV{PAGER} ) {
            exit system( "pod2text '$1' |$ENV{PAGER}" ) >> 8;
         }
         else {
            exit system( "pod2text", $1 ) >> 8;
         }
      }
      elsif ( $@ ) {
          die $@;
      }

      $result = 1;
      warn "Unrecognized help topic '$topic'\n";
   }

   print <<END_HELP_TOPICS;
$program_name - Version Copy, a tool for copying versions file repositories

help topics (use "vcp help <topic>" to see):

   vcp            General help for the vcp command

   source::p4     Extracting from a p4 repository
   dest::p4       Inserting in to a p4 repository
   source::cvs    Extracting from a cvs repository
   dest::cvs      Inserting in to a cvs repository

   newlines       Newline, ^Z and NULL issues
   process        How $program_name works

   license        Copyright and license information
   maintenance    VCP Code maintenance, debugging tips & tricks

The PAGER environment variable specifies pager program to use for
these help topics.
END_HELP_TOPICS
   exit $result;
}


sub build_html_tree_and_exit {
   my ( $prog_name, $dest_dir ) = @_;

   unless ( defined $dest_dir && length $dest_dir ) {
       $dest_dir = $prog_name . "_html";
   }

   require File::Spec;
   $dest_dir = File::Spec->rel2abs( $dest_dir );

   $| = 1;
   print "Generating HTML in $dest_dir/";

   my %modules = find_help_modules;

   require Pod::Links;
   require Pod::HTML_Elements;
   require File::Path;
   require IO::File;

   ## BEGIN CODE ADAPTED FROM NICK ING-SIMMONS' PodToHTML package
   my $links = Pod::Links->new();
   for my $fn (
      $0,
      grep /Filter[^.]|Source[^.]|Dest[^.]|\.pod/, values %modules
   ) {
      print ".";
      $links->parse_from_file($fn);
   }

   for my $name ($links->names) {
      $links->link(
         $name,
         do {
            my $outfile = $name;
            $outfile =~ s#::#/#g;
            $outfile =~ s#[^/a-z0-9A-Z._-]#_#g;
            $outfile .= ".html";
            File::Spec->catfile( $dest_dir, $outfile );
         }
      ) if $links->pod($name);
   }

   my $index_file = File::Spec->catfile( $dest_dir, "index.html" );

   my $parser = Pod::HTML_Elements->new(
      Index => $index_file,
      Links => $links,
   );

   ## the sort {} makes sure "vcp" is listed first in the
   ## resulting index.
   for my $name (
      sort {
         $a eq "vcp"
            ? -1
            : $b eq "vcp"
               ? 1
               : $a cmp $b
      } $links->names
   ) {
      print ".";
      my $file = $links->pod($name);
      my $outfile = $links->link($name);
      if (defined $file) {
         File::Path::mkpath( File::Basename::dirname( $outfile ), 0, 0755 );
         $parser->parse_from_file($file,$outfile);
      }
   }
   $parser->write_index;
   ## END CODE ADAPTED FROM NICK ING-SIMMONS' PodToHTML package
   print "\n";

   print "Finished, index file is $index_file\n";

   exit( 0 );
}


sub versions_and_exit {
   require File::Find ;
   require File::Spec;

   my $require_module = sub {
      return unless m/\.pm$/i ;
      ## Avoid "name used only once" warning
      my $fn = $File::Find::name ;
      $fn = $File::Find::name ;
      require $fn ;
   } ;

   File::Find::find(
      {
         no_chdir => 1,
	 wanted   => $require_module,
      },
      grep -d $_,
      map {
         ( File::Spec->catdir( $_, "lib", "VCP", "Source" ),
         File::Spec->catdir( $_, "lib", "VCP", "Dest" ),
	 ) ;
      } @INC
   ) ;

   my %vers ;
   my %no_vers ;

   my $recur ;
   $recur = sub {
      my ( $pkg_namespace ) = @_ ;

      no strict "refs" ;

      my $pkg_name = substr( $pkg_namespace, 0, -2 ) ;

      ## The grep means "only bother with namespaces that contain somthing
      ## other than child namespaces.
      if ( ! grep /::/, keys %{$pkg_namespace} ) {
         if ( exists ${$pkg_namespace}{VERSION} ) {
	    $vers{$pkg_name} = ${"${pkg_namespace}VERSION"}
	 }
	 else {
	    $no_vers{$pkg_name} = undef ;
	 }
      }

      my $prefix = $pkg_namespace eq "main::" ? "" : $pkg_namespace ;
      for ( keys %{$pkg_namespace} ) {
	 next unless /::$/ ;
	 next if /^main::/ ;
	 $recur->( "$prefix$_" ) ;
      }
   } ;

   $recur->( "main::" ) ;

   my $max_len = 0 ;
   $max_len = length > $max_len ? length : $max_len for keys %vers ;
      
   print "Package \$VERSIONs:\n" ;
   for ( sort keys %vers ) {
      printf(
         "   %-${max_len}s: %s\n",
	 $_,
	 defined $vers{$_} ? $vers{$_} : "undef"
      ) ;
   }

   print "No \$VERSION found for: ", join( ", ", sort keys %no_vers ), "\n" ;

   $max_len = 0 ;
   $max_len = length > $max_len ? length : $max_len for values %INC ;
   print "\nFile sizes:\n" ;
   for ( sort values %INC ) {
      printf( "   %-${max_len}s: %7d\n", $_, -s $_ ) ;
   }

   print "\nperl -V:\n" ;

   my $v = `$^X -V` ;
   $v =~ s/^/   /gm ;
   print $v ;

   exit ;
}

=head1 SEE ALSO

L<VCP::Process>, L<VCP::Newlines>, L<VCP::Source::p4>, L<VCP::Dest::p4>,
L<VCP::Source::cvs>, L<VCP::Dest::cvs>, L<VCP::Source::revml>,
L<VCP::Dest::revml>, L<VCP::Newlines>.  All are also available using C<vcp
help>.

=head1 AUTHOR

Barrie Slaymaker <barries@slaysys.com>

=head1 COPYRIGHT

Copyright (c) 2000, 2001, 2002 Perforce Software, Inc.
All rights reserved.

See L<VCP::License|VCP::License> (C<vcp help license>) for the terms of use.

=cut