USAGE for reset_sdp.sh v2.9.7: reset_sdp.sh [-B|-local] [-fast] [-no_ssl] [-no_sd] [-b <branch>[,@cl] |-t <tarfile>] [-p <dir1>[,<dir2>,...]>] [-D] or reset_sdp.sh [-h|-man] SAFETY NOTICE: This script SHOULD NEVER EXIST on a Production Perforce server. DESCRIPTION: This script simplifies the process of testing an SDP installation, repetitively blasting all process by the 'perforce' user and resetting the SDP from the ground up, blasting typical SDP folders each time. It is helpful when bootstrapping a demo server with a sample data set, complete with broker, and optionally Perl/P4Perl and Python/P4Python. PLATFORM SUPPORT: This works on Red Hat Enterprise Linux, CentOS, and Mac OSX (Mavericks, Yosemitie, Sierra) platforms. It works on RHEL/CentOS 6.4-6.9 and likely on other Linux derivatives with little or no modification. It currently supports only the bin.linux26x86_64 (Linux) and bin.darwin90x86_64 (Mac OSX/Darwin) architectures. REQUIREMENTS: Development utilities such as 'make' and the 'gcc' compiler must be installed and available in the PATH (unless running with '-fast'). The 'curl' utility must be installed and available in the PATH (unless running with '-local'). OPTIONS: -B Specify '-B' to blast base SDP dirs, for a clean start. Otherwise, downloaded components from earlier runs will be used (which should be fine if they were run recently). The '-B' and '-local' arguments are mutually exclusive. -local By default, various files and executables are downloaded from the Perforce Workshop or the Perforce FTP server as needed. With '-local', any missing files are treated as an error condition. The '-B' and '-local' arguments are mutually exclusive. -fast Specify '-fast' to skip installation of Perl auxiliary things like Perl, Python, P4Perl, P4Python. The '-fast' argument changes the check for GCC/G++ from a fatal error to a warning message. -no_ssl By default, the Perforce server is setup SSL-enabled. Specify '-no_ssl' to avoid using SSL feature. -no_sd By default, the Perforce Sample Depot data set is loaded. Specify '-no_sd' to skip loading the Sample Depot. -p <dir1>[,<dir2>,...]>] Specify a comma-delimited list of directories under /p4/common to preserve that would otherwise be removed. Directories must be specified as paths relative to /p4/common, and cannot contain spaces. For example, the value '-p config,bin/triggers' would preserve the /p4/common/config and /p4/common/bin/triggers directories. Directories specified are moved aside to a temporary working area before the SDP folders are removed. After installation, they are moved back via an 'rsync' command with no '--delete' option. This means any files that overlap with the stock install are replaced by ones that originally existed, but non-overlapping files are not removed. This is intended to be useful for developing test suites that install server under /p4/common/bin, e.g. Component Based Development scripts which install under /p4/common/bin/cbd would use '-p bin/cbd'. -b <branch>[,@cl] The default SDP install method is to clone the SDP from the main branch in The Workshop (public.perforce.com:1666). Specify '-b' to use a different branch, e.g. 'dev'. If '-b' is specified with the optional @cl syntax, where @cl specifies a changelist with files shelved on the given branch, a form of unshelving is done, enabling a workflow for testing shelved changes with the Helix Installer. So for example, specify '-b dev,@23123' to clone from the dev branch, and then followed by a fetch of shelved changelist @23123, which is expected to have files shelved in the dev branch. -t <tarfile> Specify a tarfile to use, e.g. '-t sdp.Unix.2017.3.23041.tgz', or use the special value '-t default' to use the default SDP tarfile, sdp.Unix.2017.3.23041.tgz The specified tar file must exist here: https://swarm.workshop.perforce.com/projects/perforce-software-sdp/files/downloads If '-t <tarfile>' is not specified, default install method is used instead, which is to clone the SDP main branch from The Workshop (public.perforce.com:1666). Use '-t' to get a known version of the SDP for testing. Avoid '-t' to test with the very latest SDP from a given branch (see '-b' above for more info), even if the latest has not yet been packaged into a distribution tar file. -D Set extreme debugging verbosity. HELP OPTIONS: -h Display short help message -man Display man-style help message EXAMPLES: COMPREHENSIVE INSTALLATION: su - useradd perforce mkdir -p /hxdepots/reset chown -R perforce:perforce /hxdepots/reset cd /hxdepots/reset curl -k -s -O https://swarm.workshop.perforce.com/downloads/guest/perforce_software/helix-installer/main/src/reset_sdp.sh ./reset_sdp.sh 2>&1 | tee reset_sdp.log FAST INSTALLATION (skipping Perl, Python): su - useradd perforce mkdir -p /hxdepots/reset chown -R perforce:perforce /hxdepots/reset cd /hxdepots/reset curl -k -s -O https://swarm.workshop.perforce.com/downloads/guest/perforce_software/helix-installer/main/src/reset_sdp.sh curl -k -s -O https://swarm.workshop.perforce.com/downloads/guest/perforce_software/helix-installer/main/src/r ./r Note that the 'r' wrapper script calls the reset_sdp.sh script with a pre-defined of flags optimized for fast opreration. The 'r' wapper also handles log capture, writing to the file 'reset.log'. SDP DEV BRANCH TESTING: The Helix Installer can be used to test SDP changes shelved to the SDP dev branch in The Workshop. The following example illustrates testing a change in shelved changelist 23123: su - useradd perforce mkdir -p /hxdepots/reset chown -R perforce:perforce /hxdepots/reset cd /hxdepots/reset curl -k -s -O https://swarm.workshop.perforce.com/downloads/guest/perforce_software/helix-installer/main/src/reset_sdp.sh ./reset_sdp.sh -b dev,@23123 2>&1 | tee reset_sdp.CL23123.log After the first test, an iterative test cycle may follow on the same shelved changelist. For each test iteration, the shelved changelist is first updated in the workspace from which the change was originally shelved, e.g. with a command like 'p4 shelve -f -c 23123'. Then a new test can be done by calling reset_sdp.sh with the same arguments. The script will re-install the SDP cleanly, and then re-apply the updated shelved changelist.
# | Change | User | Description | Committed | |
---|---|---|---|---|---|
#45 | 30496 | C. Thomas Tyler | Updated Version, README.md, Release Notes, and doc files Release. | ||
#44 | 30459 | C. Thomas Tyler |
Change URLs in curl calls in docs and code to avoid Apache redirects. Also removed '-s' option from curl calls. |
||
#43 | 30412 | C. Thomas Tyler | Updated docs. | ||
#42 | 30399 | C. Thomas Tyler | Adapted to SDP default value of 'localhost' for DNS name of commit server. | ||
#41 | 30398 | C. Thomas Tyler | Add '-no_enable' option to avoid enabling installed services. | ||
#40 | 30397 | C. Thomas Tyler |
Adjust location of generated crontab file to: /p4/common/etc/cron.d/crontab.<user>.<short_hostname>.<instance>. |
||
#39 | 30393 | C. Thomas Tyler | Updated docs for release. | ||
#38 | 30299 | C. Thomas Tyler | Updated docs. | ||
#37 | 30213 | C. Thomas Tyler |
Added '-si <SDPInstance>' as a command line option, so there is one less reason to need to do the more complex 'Configured' installation, especially for a proxy or stand-alone broker. #review-30214 |
||
#36 | 30045 | C. Thomas Tyler | 2023.2 release; changed default version to 2023.2. | ||
#35 | 29698 | C. Thomas Tyler |
Changed 'curl' commands referencing Workshop to use '-L'. Updated stable version numbers in README.md to use new versions with corrected URLs. |
||
#34 | 29661 | C. Thomas Tyler | Updated doc and sample to match latest version of reset_sdp.sh. | ||
#33 | 29615 | C. Thomas Tyler |
Set default to r23.1. Removed '-k' from curl calls. |
||
#32 | 28928 | C. Thomas Tyler | Updated doc file. | ||
#31 | 28662 | C. Thomas Tyler |
Added support for SELinux in enforcing mode. Enhanced documentation, including notes about SELinux handling. |
||
#30 | 28656 | C. Thomas Tyler | Updated docs to latest. | ||
#29 | 28582 | C. Thomas Tyler |
reset_sdp.sh v4.9.0: Added '-no_sudo' option. Added '-no_firewall' option. Fixed minor issue where 'systemctl' commands try to execute when systemctl isn't avail. Added test coverage in test_hi.sh. |
||
#28 | 28266 | C. Thomas Tyler |
Improved support for proxy-only hosts. #review-28267 @rwillyoung |
||
#27 | 28125 | C. Thomas Tyler | Regenerated document. | ||
#26 | 27553 | C. Thomas Tyler |
Spell check only. Non-functional changes. Docs udpated. Fixed typos in comments and messages, including generated settings.cfg files. |
||
#25 | 27391 | C. Thomas Tyler | Updated docs. | ||
#24 | 27305 | C. Thomas Tyler | Added rsync package to all platforms. | ||
#23 | 27302 | C. Thomas Tyler | Updated command line summary. | ||
#22 | 26606 | C. Thomas Tyler | Non-functional changes to maintain shellcheck compliance. | ||
#21 | 26576 | C. Thomas Tyler |
Fixed order-of-operations issue due to recent changes in SDP; the logic to implement 'sudo' as required to call 'systemd' wrappers now requires the sudo to be called before the call to configure_sample_depot.sh. Refined firewall handling logic. |
||
#20 | 26565 | C. Thomas Tyler | Set password for OSUSER to same as P4USER if OSUSER needs to be created. | ||
#19 | 26557 | C. Thomas Tyler |
Changed default Helix Core to r20.1. Updated docs. |
||
#18 | 26022 | C. Thomas Tyler | Updated doc page. | ||
#17 | 25915 | C. Thomas Tyler |
Fixed issue with firewalld configuration on RHEL/CentOS 7 systems. Changed '-X' extreme cleanup to now clear firewalld rules. Added missing mention of firewalld config in documentation. |
||
#16 | 25870 | C. Thomas Tyler | Updated Version/Release Notes and docs for release. | ||
#15 | 25819 | C. Thomas Tyler | Updated docs. | ||
#14 | 25753 | C. Thomas Tyler |
Added code to call SDP os_tweaks.sh. Regenerated command summary file. |
||
#13 | 25392 | C. Thomas Tyler | Update default SDP release. | ||
#12 | 25382 | C. Thomas Tyler |
Updated default SDP release for tar installs to sdp.Unix.2019.1.25374.tgz. |
||
#11 | 25370 | C. Thomas Tyler |
Added '-c <cfg>' and '-C' flags to use (and with '-C' generate) a config file (similar to the '-C' and '-c <cfg>' flags with p4broker). Updated docs accordingly. Added missing 'chmod +x' step in man page in docs. Enabled testing on Mac OSX to get past the package manager test, since yum/apt-get/zypper aren't expected to be on Mac OSX. |
||
#10 | 25282 | C. Thomas Tyler | Fixed order-of-operations issue for creating ~perforce/.bash* files. | ||
#9 | 25248 | C. Thomas Tyler | Filled in SDP 2019.1 changelist number, 25238. | ||
#8 | 25247 | C. Thomas Tyler | Additional cleanup. | ||
#7 | 25240 | C. Thomas Tyler |
Simplified to use a single /hxmetadata volume, as this is the most common configuration. Small sites don't need multiple volumes, and big sites have an array of hardware options, only some of which require a two-volume solution for metadata to maintain performance. Changed default replica ServerID from p4d_fr_bos to p4d_ha_bos, to promote modern 2018.2 high availability replicas that can be created with the mkrep.sh in SDP 2019.1+. The replica is not actually created with the Helix Installer, just referenced as a sample ServerID name. Extended '-B' flag to cleanup temp dir used by install_sdp_python.sh. Changed behavior to bail on failure to cleanup temp dirs, as this could result in wasted time building outdated versions of P4Python, etc. Added '-i <helix_installer_branch>' debugging flag to support testing of Helix Installer from the dev branch. Moved this and the '-D' flag to a new doc section titled DEBUGGING OPTIONS. Added '-X' eXtreme reset debugging option. Updated some internal variable names. |
||
#6 | 25054 | C. Thomas Tyler |
Updated SDP default tarball to 2018.1.23583.p2. Corrected Swarm release to 2018.3; there is no 2018.4! |
||
#5 | 24913 | C. Thomas Tyler | Updated version for release. | ||
#4 | 24863 | C. Thomas Tyler | Updated Version, release notes, and docs for release. | ||
#3 | 23364 | C. Thomas Tyler | Updated Version to release 2017.4.23363. | ||
#2 | 23360 | C. Thomas Tyler | Updated Version, relnotes and doc for release. | ||
#1 | 23281 | C. Thomas Tyler | Added doc page. |