#!/bin/bash
#==============================================================================
# Copyright and license info is available in the LICENSE file included with
# this package, and also available online:
# https://swarm.workshop.perforce.com/projects/perforce_software-helix-installer/view/main/LICENSE
#------------------------------------------------------------------------------
#==============================================================================
# Declarations
set -u
declare ThisScript="${0##*/}"
declare Version=4.2.1
# The latest SDP release tarfile has a consistent name, sdp.Unix.tgz,
# alongside the version-named tarball (e.g. sdp.Unix.2019.3.26494.tgz).
# This is best when you want the latest officially released SDP.
# An alternate install method uses Helix native DVCS features to get the very
# latest code from a branch ('dev' by default) using a 'p4 clone' command.
# Alternately, the '-d' flag can be used to copy from a local directory.
declare SDPTar="sdp.Unix.tgz"
# See usage info for the '-d' flag in this script.
declare SDPCopyDir="/sdp"
declare SDPURL="https://swarm.workshop.perforce.com/projects/perforce-software-sdp/download/downloads/$SDPTar"
declare SDPInstallMethod=FTP
declare SDPInstallBranch=Unset
declare FTPURL="https://ftp.perforce.com/perforce"
declare WorkshopPort="public.perforce.com:1666"
declare WorkshopUser=ftp
declare WorkshopRemote=
declare WorkshopBaseURL="https://swarm.workshop.perforce.com"
declare HelixInstallerProjectURL="$WorkshopBaseURL/projects/perforce_software-helix-installer"
declare HelixInstallerBaseURL="$HelixInstallerProjectURL/download"
declare HelixInstallerTarURL="$HelixInstallerBaseURL/downloads/helix_installer.tgz"
declare HelixInstallerBranch="main"
declare HelixInstallerURL="$HelixInstallerBaseURL/$HelixInstallerBranch"
declare HelixInstallerFileURL=
declare HxMetadata1=
declare HxMetadata2=
declare HxLogs=
declare DirList=
declare Hostname=
declare Timezone=
declare -i CMDEXITCODE
# The values for set here are for use in the usage() function if '-man' is
# used. They are set again further down in the code below, after settings
# are loaded from the config file which might change the values set here.
declare HxDepots="hxdepots"
declare BinDir="/$HxDepots/helix_binaries"
declare ApiArch="linux26x86_64"
declare P4BinRel=r20.1
declare P4APIRel=r20.1
declare RunUser="perforce"
declare ResetHome="/$HxDepots/reset"
declare DownloadsDir="/$HxDepots/downloads"
# This lists all files needed to operate the Helix Installer, which can be
# acquired during runtime operation in environments where outbound access to
# the public internet is available, or provisioned ahead of time for
# operation when such access is not available.
declare HelixInstallerFiles="NoTicketExpiration.group.p4s admin.user.p4s configure_sample_depot_for_sdp.sh p4broker_N.service.t p4broker_N.xml.t p4d_N.service.t p4d_N.xml.t p4p_N.service.t perforce_bash_profile perforce_bashrc protect.p4s r"
declare SDPHome=
declare TmpFile=/tmp/tmp.reset_sdp.$$.$RANDOM
declare TmpDir=/tmp/tmp.dir.reset_sdp.$$.$RANDOM
declare ShelvedChange=Unset
declare LocalShelvedChange=Unset
declare CmdLine="${0##*/} $*"
declare -i WarningCount=0
declare -i ErrorCount=0
declare InitMechanism=Unset
declare PackageManager=Unset
declare -A PackageList
declare -A Config ConfigDoc
declare -i BlastDownloadsAndBinaries=0
declare -i StopAfterReset=0
declare -i ExtremeCleanup=0
declare -i InstallDerivedAPIs=0
declare -i LoadSampleDepot=1
declare -i PullFromWebAsNeeded=1
declare -i UseSSL=1
declare -i GenDefaultConfig=0
declare -i UseConfigFile=0
declare -i MultiRun=0
declare -i SetHostname=0
declare -i SetTimezone=0
declare ConfigFile=Unset
declare PreserveDirList=Unset
declare RunUserNewHomeDir=
declare RunUserHomeDir=
declare RunGroup=Unset
declare UserAddCmd=
declare SudoersFile=
declare SudoersEntry=
declare P4YumRepo="/etc/yum.repos.d/perforce.repo"
declare P4AptGetRepo="/etc/apt/sources.list.d/perforce.list"
declare PerforcePackageRepoURL="https://package.perforce.com"
declare PerforcePackagePubkeyURL="$PerforcePackageRepoURL/perforce.pubkey"
declare TmpPubKey=/tmp/perforce.pubkey
declare -i AddPerforcePackageRepo=1
declare -i InstallCrontab=1
declare -i UpdatePackages=1
declare -i RunOSTweaks=1
declare SampleDepotTar=
declare CrontabFile=
declare ThisArch=
declare ThisHost=
declare ThisOS=
declare ThisOSName=
declare ThisOSDistro=
declare ThisOSMajorVersion=
declare FirewallType=
declare FirewallDir=
declare ThisUser=
declare RunArch="x86_64"
declare CBIN="/p4/common/bin"
declare CCFG="/p4/common/config"
declare SystemdTemplatesDir="/p4/common/etc/systemd/system"
declare SDPSetupDir="/p4/sdp/Server/Unix/setup"
declare OSTweaksScript="$SDPSetupDir/os_tweaks.sh"
declare SDPConfigDir=
declare SDPCrontabDir=
declare SDPInstances="1"
declare SDPDefaultInstance=
declare OSTweaksScript=
declare ServerID=
declare ServerType=
declare TargetServerID=
declare MkdirsCmd=
#==============================================================================
# Static Configuration - Package Lists
# The associative array 'PackageList' defines packages required for each
# package manager (yum, apt-get, or zypper).
PackageList['yum']="curl gcc gcc-c++ mailx make openssl openssl-devel rsync tar wget zlib zlib-devel"
PackageList['apt-get']="build-essential libssl-dev make zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev wget curl llvm libncurses5-dev rsync"
PackageList['zypper']="curl gcc gcc-c++ make openssl openssl-devel wget zlib zlib-devel rsync"
#==============================================================================
# Static Configuration - User Config Data
# User modifiable data is defined in the 'Config' associative array, with
# corresponding user documentation in the 'ConfigDoc' array, corresponding
# to the settings.cfg file the user modifies.
# To add a new setting, define values for both Config['YourNewValue] and
# ConfigDoc['YourNewValue]' in this block. Also, ensure the values are written
# in the appropriate section of the sample config file generated in the
# function gen_default_config().
#------------------------------------------------------------------------------
# Settings Section 1: Localization
# Keep the order that settings are defined here in sync with the 'for c in'
# loop in gen_default_config() for Section 1 below. That defines the desired
# order of appearance in the generated file.
ConfigDoc['SMTPServer']="\\n# Specify email server for the p4review script. Ignore if Helix Swarm is used."
Config['SMTPServer']="smtp.p4demo.com"
ConfigDoc['P4AdminList']="\\n# Specify an email address to receive updates from admin scripts. This may be\\n# a distribution list or comma-separated list of addresses (with no spaces)."
Config['P4AdminList']="P4AdminList@p4demo.com"
ConfigDoc['MailFrom']="\\n# Specify an email address from which emails from admin scripts are sent.\\n# This must be a single email address."
Config['MailFrom']="P4Admin@p4demo.com"
ConfigDoc['DNS_name_of_master_server']="\\n# Specify the DNS alias to refer to he master server, e.g. by end\\n# users. This might be 'perforce' but probably not an actual host name\\n# like 'perforce01', which would be known only to admins."
Config['DNS_name_of_master_server']="helix"
ConfigDoc['SiteTag']="\\n# Specify a geographic site tag for the master server location,\\n# e.g. 'bos' for Boston, MA, USA."
Config['SiteTag']="bos"
ConfigDoc['Hostname']="\\n# Specify the hostname. This can be left blank. If set on a system that supports\\n# the 'hostnamectl' utility, that utility will be used to set the hostname. If the\\n# command line parameter '-H <hostname>' is used, that will override this setting."
Config['Hostname']=""
ConfigDoc['Timezone']="\\n# Specify the timezone. This can be left blank. If set on a system that supports\\n# the 'timedatectl' utility, that utility will be used to set the timezone. If the\\n# command line parameter '-T <timezone>' is used, that will override thois setting."
Config['Timezone']=""
#------------------------------------------------------------------------------
# Settings Section 2: Data Specific
# Keep the order that settings are defined here in sync with the 'for c in'
# loop in gen_default_config() for Section 2 below. That defines the desired
# order of appearance in the generated file.
ConfigDoc['P4_PORT']="\\n# Specify the TCP port for p4d to listen on. Typically this is 1999 if \\n# p4broker is used, or 1666 if only p4d is used."
Config['P4_PORT']="1999"
ConfigDoc['P4BROKER_PORT']="\\n# Specify the TCP port for p4broker to listen on. Must be different\\n# from the P4_PORT."
Config['P4BROKER_PORT']="1666"
ConfigDoc['Instance']="\\n# Specify SDP instance name, e.g. '1' for /p4/1."
Config['Instance']="1"
ConfigDoc['CaseSensitive']="\\n# Helix Core case sensitivity, '1' (sensitive) or '0' (insensitive). If\\n# data from a checkpoint is to be migrated into this instance, set this\\n# CaseSensitive value to match the case handling of the incoming data set\\n# (as shown with 'p4 info')."
Config['CaseSensitive']="1"
ConfigDoc['P4USER']="\\n# Set the P4USER value for the Perforce super user."
Config['P4USER']="perforce"
ConfigDoc['Password']="\\n# Set the password for the super user (see P4USER). If using this Helix Installer to\\n# bootstrap a production installation, replace this default password with your own."
Config['Password']="F@stSCM!"
ConfigDoc['SimulateEmail']="\\n# Specify '1' to avoid sending email from admin scripts, or 0 to send\\n# email from admin scripts."
Config['SimulateEmail']="1"
ConfigDoc['ServerID']="\\n# Specify a ServerID value. Leave this value blank for master/commit servers.\\n# The value for master/commit servers is set automatically."
Config['ServerID']=""
ConfigDoc['ServerType']="\\n# Specify the type of server. Valid values are:\\n# * p4d_master - A master/commit server.\\n# * p4d_replica - A replica with all metadata from the master (not filtered in\\n# any way).\\n# * p4d_filtered_replica - A filtered replica or filtered forwarding replica.\\n# * p4d_edge - An edge server.\\n# * p4d_edge_replica - Replica of an edge server. Also set TargetServerID.\\n# * p4broker - An SDP host running only a broker, with no p4d.\\n# * p4proxy - An SDP host running a proxy (maybe with a broker in front), with\\n# no p4d.\\n#\\n# The ServerID must also be set if the ServerType value is\\n# anything other than 'p4d_master'."
Config['ServerType']="p4d_master"
ConfigDoc['TargetServerID']="\\n# Set only if ServerType is p4d_edge_replica. The value is ServerID of\\n# edge server that this server is a replica of, and must match the\\n# 'ReplicatingFrom:' field of the server spec."
Config['TargetServerID']=
#------------------------------------------------------------------------------
# Settings Section 3: Deep Customization
# Keep the order that settings are defined here in sync with the code in
# gen_default_config() for Section 3 below. That defines the desired order of
# appearance in the generated file.
ConfigDoc['OSUSER']="\\n# Specify the Linux Operating System account under which p4d and other Helix\\n# services will run as. This user will be created if it does not exist. If\\n# created, the password will match that of the P4USER."
Config['OSUSER']="perforce"
ConfigDoc['OSGROUP']="\\n# Specify the primary group for the Linux Operating System account specified\\n# as OSUSER."
Config['OSGROUP']="perforce"
ConfigDoc['OSUSER_ADDITIONAL_GROUPS']="\\n#Specify a comma-delimited list of any additional groups the OSUSER to be\\n# created should be in. This is passed to the 'useradd' command the '-G'\\n# flag. These groups must already exist."
Config['OSUSER_ADDITIONAL_GROUPS']=
ConfigDoc['OSUSER_HOME']="\\n# Specify home directory of the Linux account under which p4d and other Helix\\n# services will run as, and the group, in the form <user>:<group>. This user\\n# and group will be created if they do not exist."
Config['OSUSER_HOME']="/home/perforce"
ConfigDoc['P4BinRel']="\\n# The version of Perforce Helix binaries to be downloaded: p4, p4d, p4broker, and p4p."
Config['P4BinRel']="$P4BinRel"
ConfigDoc['P4APIRel']="\\n# The version of the C++ API to be downloaded, for building dervied APIs such\\n# as P4Perl and P4Python. This is typically the same as P4BinRel, but\\n# sometimes behind as P4Perl and P4Python can lag behind Helix Core releases."
Config['P4APIRel']="$P4APIRel"
ConfigDoc['HxDepots']="\\n# Define the directory that stores critical digital assets that must be\\n# backed up, including contents of versioned files, metadata checkpoints,\\n# and numbered journal files."
Config['HxDepots']="/hxdepots"
ConfigDoc['HxLogs']="\\n# Define the directory used to store the active journal (P4JOURNAL) and\\n# various logs."
Config['HxLogs']="/hxlogs"
ConfigDoc['HxMetadata1']="\\n# The /HxMetadata1 and /HxMetadata1 settings define two interchangeable\\n# directories that store either active/live metadata databases (P4ROOT) or\\n# offline copies of the same (offline_db). These typically point to the same\\n# directory. Pointing them to the same directory simplifies infrastructure\\n# and enables the fastest recovery options. Using multiple metadata volumes\\n# is typically done when forced to due to capacity limitations for metadata\\n# on a single volume, or to provide operational survivability of the host in\\n# event of loss of a single metadata volume."
Config['HxMetadata1']="/hxmetadata"
ConfigDoc['HxMetadata2']=
Config['HxMetadata2']="/hxmetadata"
#------------------------------------------------------------------------------
# Function: usage (required function)
#
# Input:
# $1 - style, either -h (for short form) or -man (for man-page like format).
#------------------------------------------------------------------------------
function usage
{
declare style=${1:--h}
msg "USAGE for $ThisScript v$Version:
$ThisScript [-B|-local] [-fast] [-c <cfg>] [-no_ssl] [-no_sd] [-no_cron] [-no_ppr] [-no_tweaks] [-H <hostname>] [-T <timezone>] [[-d <sdp_dir>] | [-b <branch>[,@cl]]] [-p <dir1>[,<dir2>,...]>] [-i <helix_installer_branch>] [-D] [-X|-R] [-M]
or
$ThisScript -C > settings.cfg
or
$ThisScript [-h|-man]
"
if [[ $style == -man ]]; then
msg "
SAFETY NOTICE:
This script SHOULD NEVER EXIST on a Production Perforce server.
DESCRIPTION:
This script simplifies the process of testing an SDP installation,
repetitively blasting all process by the 'perforce' user and resetting
the SDP from the ground up, blasting typical SDP folders each time.
It installs the Perforce Helix Core server (P4D) with a P4Broker,
and installs the Perforce Sample Depot data set used for training
and PoC installations.
It is helpful when bootstrapping a demo server with a sample data
set, complete with broker, and optionally Perl/P4Perl and
Python/P4Python.
This script handles many aspects of installation. It does the
following:
* Creates the OS user that will run the Helix Core p4d process,
the 'perforce' user by default, using the 'useradd' command,
unless that account arleady exists. If a non-local account
is to be used, that should be created first before running this
script. If the account is created using 'useradd', the password
will be set to match that of the admin P4USER, which is also
'perforce' by default (matching the OSUSER).
* Creates the home directory for the OSUSER user, if needed.
* Adds OS packages as needed for P4Perl/P4Python local builds
(if -dapi is specified).
Following installation, it also does the following to be more
convenient for demos, and also give a more production-like feel:
* Grants the perforce user sudo access.
* Creates default ~perforce/.bash_profile and .bashrc files.
* Connects to the Perforce Package Repository (APT and YUM only).
* Adds firewalld rules for Helix server and broker ports ('firewalld'
only; there is no support for the 'ufw' or other firewalls).
* Installs crontab for ~perforce user.
PLATFORM SUPPORT:
This works on Red Hat Enterprise Linux, CentOS, and Mac OSX
10.10+ thru Mojave platforms. It works on RHEL/CentOS
6.4-7.6, SuSE Linux 12, and likely on Ubuntu 18 and other Linux
distros with little or no modification.
This script currently supports the bin.linux26x86_64 (Linux) and
bin.maxosx1010x86_64 (Mac OSX/Darwin) architectures.
This script recognizes SysV, Systemd, and Launchd init mechanisms,
though does not currently support Launchd on OSX.
For Mac OSX, note that this requires bash 4.x, and the default
bash on Mac OSX remains 3.x as of OSX Mojave. For operating on
Mac, the /bin/bash shebang line needs to be adjusted to reference
a bash 4 version, e.g. /usr/local/bin/bash if installed with
Homebrew.
REQUIREMENTS:
The following OS packages are installed (unless '-fast' is
used):
* Yum: ${PackageList[yum]}
* AptGet: ${PackageList[apt-get]}
* Zypper: ${PackageList[zypper]}
Development utilities such as 'make', the 'gcc' compiler,
and 'curl' must be installed and available in the PATH (unless
running with '-fast'). The package installation as noted
above generally ensures these dependencies are available.
OPTIONS:
-c <cfg>
Specify a config file. By default, values for various settings
such as the email to send script logs to are configure with
demo values, e.g. ${Config['P4AdminList']}. Optionally, you can
specify a config file to define your own values.
For details on what settings you can define in this way, run:
$ThisScript -C > setings.cfg
Then modify the generated config file settings.cfg as desired.
The generated config file contains documentation on settings and
values. If no changes are made to the generated file, running with
'-c settings.cfg' is the equivalent of running without using '-c' at
all.
-C See '-c <cfg>' above.
-B Specify '-B' to blast base SDP dirs, for a clean start.
Otherwise without '-B', downloaded components from earlier
runs will be used (which should be fine if they were run
recently).
The '-B' flag also replaces files in the $ResetHome
directory, where this script lives, with those downloaded
from The Workshop (the versions of which are affected
by the '-i <helix_installer_branch>' flag, described
below).
The '-B' flag also blasts the /tmp/downloads and /tmp/p4perl
directories, used by install_sdp_python.sh and
install_sdp_perl.sh, if they exist.
-local
By default, various files and binaries are downloaded from
the Perforce Workshop and the Perforce FTP server as needed.
If the server machine on which the Helix Installer is to be
run cannot reach the public internet or if using files from
external sites is not desired, the '-local' flag can be used.
With '-local', needed files must be acquired and put in place
on the server machine on which this script is to be run. Any
missing files result in error messages.
The '-local' argument cannot be used with -B.
For '-local' to work, the following must exist:
1. Helix Binaries
Helix binaries must exist in $BinDir:
* $BinDir/p4
* $BinDir/p4d
* $BinDir/p4broker
* $BinDir/p4p
2. Server Deployment Package (SDP)
The SDP tarball must be acquired an put in place here:
* $DownloadsDir/$SDPTar
3. Sample Depot Tarball
The Sample Depot appropriate to your platform must exist unless the
the '-no_sd' ('No Sample Depot') is used.
* $DownloadsDir/sampledepot.mac.tar.gz (on Mac/OSX if case-insensitive)
* $DownloadsDir/sampledepot.tar.gz (on UNIX/Linux or case-sensitive Mac)
4. Helix Installer
With '-local', the 'reset_sdp.sh' script and all related files must
be acquired and placed in $ResetHome.
See EXAMPLES below for sample of acquriring files for use with
'-local' mode.
-fast Specify '-fast' to skip package installation using
the package manager (yum, apt-get, or zypper).
The '-fast' flag should not be used if you plan to
deploy or develop triggers that use P4Python or P4Perl,
such as the SDP CheckCaseTrigger.py.
-dapi Specify '-dapi' (derived API) to attempt install of
the SDP derived APIs if they are available in the
SDP pacakge.
Without the '-dapi' option, installation takes only a
few minutes typically. With '-dapi', expect the
install to take 20+ minutes due to the time to do
builds and run automated tests suites for Perl, Python,
P4Perl, and P4Python.
The '-fast' and '-dapi' options are mutually exclusive.
If '-dapi' is not used and a need arises afterward to
install the derived APIs, that can be done with by running
the following as the configured OSUSER ('$RunUser' by default):
cd $SDPSetupDir
./install_sdp_python.sh
./install_sdp_perl.sh
Note: These install_sdp_*.sh scripts may not be available in
the SDP Package. Also, required packages such as gcc/g++ may
need to be installed separately
-no_ssl
By default, the Perforce server is setup SSL-enabled. Specify
'-no_ssl' to avoid using SSL feature.
-no_sd
By default, the Perforce Sample Depot data set is loaded.
Specify '-no_sd' to skip loading the Sample Depot.
-no_cron
Skip intialization of the crontab.
-no_ppr
Skip addition of the Perforce Package Repository for YUM/APT
repos. By default, the Package Repository is added.
-no_tweaks
Skip execution of the SDP operating system tweaks script,
os_tweaks.sh.
-H <hostname>
Set the hostname. This is only supported on systems that
support the 'hostnamectl' command. The hostname is set by
doing: hostnamectl set-hostname <hostname>
If the corresponding 'Hostname' setting is defined in the
configuration file and this '-H <hostname>' flag is used,
the command line option will override the config file.
-T <timezone>
Set the timezone. This is only supported on systems that
support the 'timedatectl' command. The timezone is set by
doing: timezonectl set-timezone <timezone>
If the corresponding 'Timezone' setting is defined in the
configuration file and this '-T <timezone>' flag is used,
the command line option will override the config file.
-p <dir1>[,<dir2>,...]>]
Specify a comma-delimited list of directories under /p4/common
to preserve that would otherwise be removed. Directories must
be specified as paths relative to /p4/common, and cannot contain
spaces.
For example, the value '-p config,bin/triggers' would preserve the
$CCFG and $CBIN/triggers directories.
Directories specified are moved aside to a temporary working area
before the SDP folders are removed. After installation, they are
moved back via an 'rsync' command with no '--delete' option. This
means any files that overlap with the stock install are replaced
by ones that originally existed, but non-overlapping files are not
removed.
This is intended to be useful for developing test suites that
install server under $CBIN, e.g. Component Based Development
scripts which install under $CBIN/cbd would use '-p bin/cbd'.
-d <sdp_dir>
Specify a directory on the local host containing the SDP to deploy.
Use the special value '-d default' to use the /sdp directory (as per
the Docker-based SDP Test Suite environment).
The directory specified by '-d' is expected to contain either:
* an SDP tarball ($SDPTar) file, or
* an already-extracted SDP directory, which must include the SDP
Version file.
-b <branch>[,@cl]
The default SDP install method is to use the latest released SDP
tarball representing the main branch in The Workshop ($WorkshopPort).
The latest tarball can be found on this server, consistently named
$SDPTar. This file appears alongside a version-tagged file
named something like sdp.Unix.2019.2.25938.tgz. These appear here:
https://swarm.workshop.perforce.com/projects/perforce-software-sdp/files/downloads
Specify '-b' to use a different branch, typicall '-b dev'. This
changes the install method from a tarball to using a 'p4 clone'
command using Helix native DVCS features to fetch the very latest
unreleased files from the branch at any point in time. This is mainly
of interest when testing the SDP or previewing specific up and
coming features.
If '-b' is specified with the optional @cl syntax, where @cl
specifies a changelist with files shelved on the given branch,
a form of unshelving is done, enabling a workflow for testing
shelved changes with the Helix Installer. So for example,
specify '-b dev,@23123' to clone from the dev branch, and then
followed by a fetch of shelved changelist @23123, which is
expected to have files shelved in the dev branch.
DEBUGGING OPTIONS:
-i <helix_installer_branch>
Specify the branch of the Helix Installer to use. This affects the
URL from which Helix Installer files in $ResetHome are pulled from
The Workshop. The default is main; an alternative is '-i dev'.
-D Set extreme debugging verbosity.
-X Extreme reset. This removes the user accout for the configured
OSUSER ('$RunUser' by default) and blasts all SDP-related directories
at the start of script operations, including the home directory
for the configured OSUSER.
This also clears firewall rules ('firewalld' only).
Using '-X' does not blast the Helix Installer downloads or
helix_binaries directories, and thus is compatible with either the
'-B' or '-local' options.
This also does not undo the setting of the hostname or the timezone
with either the command line ('-H <hostname>' and '-T <timezone>')
or configuration file settings.
-R Specify '-R' to reset. The cleanup logic is the same as with
-X. Unlike -X, with -R, processing stops after the cleanup is
done.
-M Specify '-M' to allow multiple runs. This is useful for running
a series of tests. This option disables the saftey feature that
self-disables this script after it completes.
to prevent accidentally running this
script again, e.g. after real data has been migrated to this
machine after using this script to bootstrap for production.
HELP OPTIONS:
-h Display short help message
-man Display man-style help message
EXAMPLES:
=== FAST INSTALLATION (skipping package updates) ===
su -
mkdir -p /hxdepots/reset
cd /hxdepots/reset
curl -k -s -O $HelixInstallerURL/src/$ThisScript
curl -k -s -O $HelixInstallerURL/src/r
chmod +x ${ThisScript} r
./r
Note that the 'r' wrapper script calls the $ThisScript script with
a pre-defined of flags optimized for fast opreration. The 'r' wapper
also handles log capture, writing to the file '${ThisScript/sh/log}'.
=== COMPREHENSIVE INSTALLATION ===
su -
mkdir -p /hxdepots/reset
cd /hxdepots/reset
curl -k -s -O $HelixInstallerURL/src/$ThisScript
chmod +x $ThisScript
./$ThisScript 2>&1 | tee ${ThisScript/sh/log}
=== CONFIGURED INSTALLATION ===
su -
mkdir -p /hxdepots/reset
cd /hxdepots/reset
curl -k -s -O $HelixInstallerURL/src/$ThisScript
chmod +x $ThisScript
### Generate a default config file:
./$ThisScript -C > settings.cfg
### Edit settings.cfg, changing the values as desired:
vi settings.cfg
./$ThisScript -c settings.cfg 2>&1 | tee log.reset_sdp
=== LOCAL INSTALL ===
The following sample commands illustrate how to acquire the
dependencies for running with '-local' on a machine that can reach
the public internet. The resulting file structure, with paths as
shown, would need to be somehow copied to the machine where the
this reset_sdp.sh script is to be run. This can be used to
facilitate operation on a machine over an \"air gap\" network.
$ mkdir -p $BinDir
$ cd $BinDir
$ curl -k -s -O $FTPURL/$P4BinRel/bin.$ApiArch/p4
$ curl -k -s -O $FTPURL/$P4BinRel/bin.$ApiArch/p4d
$ curl -k -s -O $FTPURL/$P4BinRel/bin.$ApiArch/p4broker
$ curl -k -s -O $FTPURL/$P4BinRel/bin.$ApiArch/p4p
$ mkdir $DownloadsDir
$ cd $DownloadsDir
$ curl -k -s -O $FTPURL/tools/$SampleDepotTar
$ curl -k -s -O $HelixInstallerTarURL
$ tar -xf ${HelixInstallerTarURL##*/}
$ rsync -a hi/src $ResetHome
=== SDP DEV BRANCH TESTING ===
The Helix Installer can be used to test SDP changes shelved to the SDP
dev branch in The Workshop. The following example illustrates testing
a change in shelved changelist 23123:
su -
mkdir -p /hxdepots/reset
cd /hxdepots/reset
curl -k -s -O $HelixInstallerURL/src/reset_sdp.sh
./reset_sdp.sh -b dev,@23123 2>&1 | tee log.reset_sdp.CL23123
After the first test, an iterative test cycle may follow on the same
shelved changelist. For each test iteration, the shelved changelist
is first updated in the workspace from which the change was originally
shelved, e.g. with a command like 'p4 shelve -f -c 23123'.
Then a new test can be done by calling reset_sdp.sh with the same
arguments. The script will re-install the SDP cleanly, and then
re-apply the updated shelved changelist.
=== SDP TEST SUITE SUPPORT ===
The Helix Installer can install the SDP in the Docker-based SDP
Test Suite. In that environment, the directory /sdp appears on
the test VMs, shared from the host machine. To deploy that SDP,
use the '-d <sdp_dir>' flag, something like this:
./reset_sdp.sh -d /sdp -fast 2>&1 | tee log.reset_sdp.test
"
fi
exit 1
}
#------------------------------------------------------------------------------
# Functions msg(), dbg(), and bail().
# Sample Usage:
# bail "Missing something important. Aborting."
# bail "Aborting with exit code 3." 3
function msg () { echo -e "$*"; }
function warnmsg () { msg "\\nWarning: ${1:-Unknown Warning}\\n"; WarningCount+=1; }
function errmsg () { msg "\\nError: ${1:-Unknown Error}\\n"; ErrorCount+=1; }
function dbg () { msg "DEBUG: $*" >&2; }
function bail () { errmsg "${1:-Unknown Error}"; exit "${2:-1}"; }
#------------------------------------------------------------------------------
# Functions run($cmd, $desc)
#
# This function is similar to functions defined in SDP core libraries, but we
# need to duplicate them here since this script runs before the SDP is
# available on the machine (and we require dependencies for this
# script).
function run {
cmd="${1:-echo Testing run}"
desc="${2:-}"
[[ -n "$desc" ]] && msg "$desc"
msg "Running: $cmd"
$cmd
CMDEXITCODE=$?
return $CMDEXITCODE
}
#------------------------------------------------------------------------------
# Function: gen_default_config()
#
# This generates a sample configuration settings file. Output is generated to
# stdout, making it easy for external automation to modify. By convention,
# output is generated to a file named settings.cfg, e.g. with '-C settings.cfg'
# flag with output redirected to that file.
#
# The sample file contains all required settings and reasonable sample values.
# The in-code documentation describes how the settings are used. Settings
# are enumerated in the Config and ConfigDoc associative arrays, with the
# index of the arrays being the setting name. For example, if the setting
# is ServerID, it can be referenced as ${Config['ServerID']}.
#
# The sections of the file are delineated by comments, with an description of
# what type of settings are in each section. The sections are Section 1:
# Localization, Section 2: Data Specific, and Section 3: Deep Customization.
# A hand-crafted 'for' loop in each section indicates what section any given
# setting belongs in.
#
# Generate a sample settings.cfg file.
function gen_default_config {
echo -e "\
#------------------------------------------------------------------------------
# Config file for $ThisScript v$Version.
#------------------------------------------------------------------------------
# This file is in bash shell script syntax.
# Note: Avoid spaces before and after the '=' sign.
# For demo and training installations, usually all defaults in this file
# are fine.
# For Proof of Concept (PoC) installation, Section 1 (Localization) settings
# should all be changed to local values. Some settings in Section 2 (Data
# Specific) might also be changed.
# Changing settings in Section 3 (Deep Customization) is generally
# discouraged unless necessary when bootstrapping a prodction installation or
# a high-realism PoC.
#------------------------------------------------------------------------------
# Section 1: Localization
#------------------------------------------------------------------------------
# Changing all these is typical and expected, even for PoC installations."
for c in SMTPServer P4AdminList MailFrom DNS_name_of_master_server SiteTag Hostname Timezone; do
echo -e "${ConfigDoc[$c]}"
echo "$c=${Config[$c]}"
done
echo -e "
#------------------------------------------------------------------------------
# Section 2: Data Specific
#------------------------------------------------------------------------------
# These settings can be changed to desired values, though default values are
# preferred for demo installations."
for c in P4_PORT P4BROKER_PORT Instance CaseSensitive P4USER Password SimulateEmail ServerID ServerType TargetServerID; do
echo -e "${ConfigDoc[$c]}"
echo "$c=${Config[$c]}"
done
echo -e "
#------------------------------------------------------------------------------
# Section 3: Deep Customization
#------------------------------------------------------------------------------
# Changing these settings is gently discouraged, but may be necessary for
# bootstrapping some production environments with hard-to-change default values
# for settings such as OSUSER, OSGROUP, Hx*, etc.
#
# Changing these settings is gently discouraged becuase changing these values
# will cause the configuration to be out of alignment with documentation and
# sample instructions for settings that are typically left as defaults.
# However, there are no functional limitations to changing these settings."
for c in OSUSER OSGROUP OSUSER_ADDITIONAL_GROUPS OSUSER_HOME P4BinRel P4APIRel; do
echo -e "${ConfigDoc[$c]}"
echo "$c=${Config[$c]}"
done
echo -e "
# The following Hx* settings reference directories that store Perforce
# Helix data. If configuring for optimal performance and scalability,
# these folders can be mount points for storage volumes. If so, they must
# be mounted prior to running the $ThisScript script (other than to generate
# this configuration file).
#
# See the Server Deployment Package (SDP) for information and guidance on
# provisioning these volumes."
for c in HxDepots HxLogs; do
echo -e "${ConfigDoc[$c]}"
echo "$c=${Config[$c]}"
done
# Special case: The ConfigDoc for HxMetadata1 applies to both HxMetadata1
# and HxMetadata2 settings, so display it only once.
echo -e "${ConfigDoc['HxMetadata1']}"
echo "HxMetadata1=${Config['HxMetadata1']}"
echo "HxMetadata2=${Config['HxMetadata2']}"
}
#==============================================================================
# Command Line Processing
declare -i shiftArgs=0
set +u
while [[ $# -gt 0 ]]; do
case $1 in
(-B) BlastDownloadsAndBinaries=1;;
(-local) PullFromWebAsNeeded=0;;
(-dapi) InstallDerivedAPIs=1;;
(-fast) UpdatePackages=0;;
(-no_ssl) UseSSL=0;;
(-no_sd) LoadSampleDepot=0;;
(-no_cron) InstallCrontab=0;;
(-no_ppr) AddPerforcePackageRepo=0;;
(-no_tweaks) RunOSTweaks=0;;
(-H) Hostname="$2"; SetHostname=1; shiftArgs=1;;
(-T) Timezone="$2"; SetTimezone=1; shiftArgs=1;;
(-C) GenDefaultConfig=1;;
(-c) ConfigFile="$2"; UseConfigFile=1; shiftArgs=1;;
(-d)
SDPInstallMethod=Copy
[[ "$2" == "default" ]] || SDPCopyDir="$2"
shiftArgs=1
;;
(-b)
# If we are pulling from main and not using the ',@' sytnax,
# stick with tarball installation. Otherwise, switch to cloning
# from the specifiec branch (typically dev).
if [[ "$2" == *",@"* ]]; then
SDPInstallMethod=DVCS
SDPInstallBranch=${2%%,@*};
ShelvedChange=${2##*,@}
else
SDPInstallBranch=$2;
[[ "$SDPInstallBranch" == "main" ]] || SDPInstallMethod=DVCS
fi
shiftArgs=1
;;
(-p) PreserveDirList=$2; shiftArgs=1;;
(-h) usage -h;;
(-man) usage -man;;
(-D) set -x;; # Debug; use 'set -x' mode.
(-X) ExtremeCleanup=1;;
(-R) ExtremeCleanup=1; StopAfterReset=1;;
(-M) MultiRun=1;;
(-i) HelixInstallerBranch="$2"; shiftArgs=1;;
(*) bail "Usage Error: Unknown arg ($1).";;
esac
# Shift (modify $#) the appropriate number of times.
shift; while [[ $shiftArgs -gt 0 ]]; do
[[ $# -eq 0 ]] && bail "Usage Error: Wrong number of args or flags to args."
shiftArgs=$shiftArgs-1
shift
done
done
set -u
#------------------------------------------------------------------------------
# Command Line Validation
[[ "$UseConfigFile" -eq 1 && "$GenDefaultConfig" -eq 1 ]] && \
bail "The '-c <cfg>' and '-C' options are mutually exclusive."
[[ "$InstallDerivedAPIs" -eq 1 && "$UpdatePackages" -eq 0 ]] && \
bail "The '-fast' and '-dapi' options are mutually exclusive."
#------------------------------------------------------------------------------
# Main Program
# Set hostname and timezone early in processing, and bail unless both are
# successful.
if [[ -n "$Hostname" ]]; then
if command -v hostnamectl > /dev/null; then
if hostnamectl set-hostname "$Hostname"; then
msg "Hostname set to $(hostname); short hostname is $(hostname -s)."
else
errmsg "Failed to set hostname with: hostnamectl set-hostname $Hostname";
fi
else
errmsg "Not settting hostname due to lack of 'hostnamectl' utility."
fi
fi
if [[ -n "$Timezone" ]]; then
if command -v timedatectl > /dev/null; then
if timedatectl set-timezone "$Timezone"; then
msg "Timezone is set. Date is: $(date)"
else
errmsg "Failed to set timezone with: timedatectl set-timezone $Timezone";
fi
else
errmsg "Not settting timezone due to lack of 'timedatectl' utility."
fi
fi
[[ "$ErrorCount" -ne 0 ]] && \
bail "Aborting early due to failure to set hostname and/or timezone."
ThisUser="$(whoami)"
ThisOS="$(uname -s)"
ThisArch="$(uname -m)"
ThisHost="$(hostname -s)"
#------------------------------------------------------------------------------
# Special Mode: Generate Default Config File
# In this mode, generate a sample config file on stdout, and exit.
if [[ "$GenDefaultConfig" -eq 1 ]]; then
gen_default_config
exit 0
fi
#------------------------------------------------------------------------------
# Regular processing mode.
msg "Started $ThisScript v$Version on host $ThisHost as user $ThisUser at $(date), called as:\\n\\t$CmdLine"
if [[ "$UseConfigFile" -eq 1 ]]; then
[[ -r "$ConfigFile" ]] || \
bail "Config file specified with '-c $ConfigFile' is not readable."
msg "Loading configuration data from $ConfigFile."
for c in "${!Config[@]}"; do
value=$(grep ^$c= "$ConfigFile")
value="${value#*=}"
Config[$c]="$value"
done
SDPInstances="${Config['Instance']}"
RunGroup="${Config['OSGROUP']}"
RunUserNewHomeDir="${Config['OSUSER_HOME']}"
else
# We want to know whether RunGroup was set explicitly in the settings.cfg
# file or not. If not, we set it to the value of 'Unset', enabling
# OS-dependent logic to below to supply a platform-specific default.
# We don't want platform-specific defaults to overrided values explicilty
# defined in settings.cfg if that is used.
RunGroup=Unset
# Similarly, we want to apply the home directory specified in account
# creation if it was defined in settings.cfg, but not otherwise.
RunUserNewHomeDir=Unset
fi
# After the configuration data is loaded, set variables that depend on
# the loaded configuration.
SDPDefaultInstance="${SDPInstances%% *}"
RunUser="${Config['OSUSER']}"
SudoersFile="/etc/sudoers.d/$RunUser"
SudoersEntry="$RunUser ALL=(ALL) NOPASSWD: ALL"
HxDepots="${Config['HxDepots']}"
HxMetadata1="${Config['HxMetadata1']}"
HxMetadata2="${Config['HxMetadata2']}"
HxLogs="${Config['HxLogs']}"
# Trim the leading '/' from Hx* settings to be compatible with SDP mkdirs.cfg
HxDepots="${HxDepots#/}"
HxMetadata1="${HxMetadata1#/}"
HxMetadata2="${HxMetadata2#/}"
HxLogs="${HxLogs#/}"
BinDir="/$HxDepots/helix_binaries"
DownloadsDir="/$HxDepots/downloads"
ResetHome="/$HxDepots/reset"
SDPHome="/$HxDepots/sdp"
SDPSetupDir="$SDPHome/Server/Unix/setup"
SDPConfigDir="$SDPHome/Server/Unix$CCFG"
SDPCrontabDir="$SDPHome/Server/Unix/p4/common/etc/cron.d"
OSTweaksScript="$SDPSetupDir/os_tweaks.sh"
ServerID="${Config['ServerID']}"
ServerType="${Config['ServerType']}"
TargetServerID="${Config['TargetServerID']}"
# The configuration settings for Hostname and Timezone will be overridden if
# their correponding command line options are set. So if '-H <hostname>' is
# given on the command line, the Hostname setting from the config file is
# ignored. Simiarly, if '-T <timezone>' is given on the command line, the
# Timezone setting from the config file is ignored.
[[ "$SetHostname" -eq 0 ]] && Hostname="${Config['Hostname']}"
[[ "$SetTimezone" -eq 0 ]] && Timezone="${Config['Timezone']}"
# Do some data validations based on data loaded from the configuration file.
if [[ "$UseConfigFile" -eq 1 ]]; then
msg "Doing sanity checks on data loaded from the config file."
if [[ "$ServerType" != "p4d_master" ]]; then
[[ -z "$ServerID" ]] && \
errmsg "ServerID is not set. ServerID must be set if ServerType is not p4d_master. ServerType is [$ServerType]."
fi
if [[ -n "$TargetServerID" ]]; then
[[ "$ServerType" != "p4d_edge_replica" ]] && \
errmsg "TargetServerID is set (to $TargetServerID), but ServerType is not p4d_edge_replica. TargetServerID can only be set when ServerType is p4d_edge_replica. ServerType [$ServerType]."
fi
if [[ "$ErrorCount" -eq 0 ]]; then
msg "Config file data passed santiy checks."
else
msg "Config file data passed santiy checks."
fi
fi
# Get just enough detailed OS info in order to fill in
# details in the Perforce pacakge repository files.
if [[ "$ThisOS" == "Linux" ]]; then
if [[ -r "/etc/redhat-release" ]]; then
if grep -q ' 6\.' /etc/redhat-release; then
ThisOSMajorVersion="6"
elif grep -q ' 7\.' /etc/redhat-release; then
ThisOSMajorVersion="7"
elif grep -q ' 8\.' /etc/redhat-release; then
ThisOSMajorVersion="8"
fi
[[ -n "$ThisOSMajorVersion" ]] || \
warnmsg "Could not determine OS Major Version from contents of /etc/redhat-release."
elif [[ -r "/etc/lsb-release" ]]; then
ThisOSName=$(grep ^DISTRIB_ID= /etc/lsb-release)
ThisOSName=${ThisOSName#*=}
ThisOSName=${ThisOSName,,}
ThisOSDistro=$(grep ^DISTRIB_CODENAME= /etc/lsb-release)
ThisOSDistro=${ThisOSDistro#*=}
[[ -n "$ThisOSName" && -n "$ThisOSDistro" ]] || \
warnmsg "Could not determine OS Name and Distro from contents of /etc/lsb-release."
fi
if [[ -r "/etc/firewalld/services" ]]; then
FirewallType="Firewalld"
FirewallDir="/etc/firewalld/services"
elif [[ -r "/etc/sysconfig/iptables" ]]; then
FirewallType="IPTables"
FirewallDir="/etc/sysconfig"
fi
fi
if [[ "$ThisUser" != root ]]; then
bail "Run as root, not $ThisUser."
else
msg "Verified: Running as root user."
fi
[[ "$BlastDownloadsAndBinaries" -eq 1 && "$PullFromWebAsNeeded" -eq 0 ]] && \
bail "The '-B' and '-local' arguments are mutually exclusive."
[[ "$SDPInstallBranch" != "Unset" && "$SDPInstallMethod" == "Copy" ]] && \
bail "The '-b <branch>' and '-d <sdp_dir>' arguments are mutually exclusive."
[[ "$SDPInstallBranch" == Unset ]] && SDPInstallBranch=main
HelixInstallerURL="$HelixInstallerBaseURL/$HelixInstallerBranch"
#------------------------------------------------------------------------------
# Self-update
cd "$ResetHome" || bail "Could not cd to $ResetHome. Aborting."
msg "\\nEnsuring Helix Installer files are available."
for f in $HelixInstallerFiles; do
HelixInstallerFileURL="$HelixInstallerURL/src/$f"
if [[ ! -f "$f" ]]; then
[[ "$PullFromWebAsNeeded" -eq 0 ]] && \
bail "Missing Helix Installer file [$f] and '-local' specified. Aborting."
run "curl -k -s -O $HelixInstallerFileURL" "Getting file $f." ||\
bail "Failed to download from [$HelixInstallerFileURL]. Aborting."
else
if [[ "$BlastDownloadsAndBinaries" -eq 1 ]]; then
run "curl -k -s -O $HelixInstallerFileURL" \
"Replacing Helix Installer file $f due to '-B'." ||\
bail "Failed to download file [$PWD/$f]. Aborting."
else
msg "Using existing Helix Installer file $PWD/$f."
fi
fi
if [[ ! -x "$f" ]]; then
if [[ "$f" == *".sh" || "$f" == r ]]; then
run "chmod +x $f" "chmod +x $f" || bail "Failed to do: chmod +x $f. Aborting."
fi
fi
done
#------------------------------------------------------------------------------
# Extreme Cleanup with -X
if [[ "$ExtremeCleanup" -eq 1 ]]; then
msg "\\nStarted Extreme Cleanup due to -X."
if id -u "$RunUser" > /dev/null 2>&1; then
RunUserHomeDir="$(eval echo ~"$RunUser")"
run "pkill -9 -u $RunUser" "Blasting processes by OS user $RunUser." ||\
warnmsg "Failed to blast all processes by OS user $RunUser."
sleep 1
run "userdel $RunUser" "Removing OS user $RunUser." ||\
warnmsg "Failed to remove OS user $RunUser."
run "/bin/rm -rf $RunUserHomeDir" "Removing home dir $RunUserHomeDir" ||\
warnmsg "Failed to remove $RunUserHomeDir."
else
msg "Extreme Cleanup: OS User $RunUser does not exist."
fi
if [[ "$HxMetadata1" == "$HxMetadata2" ]]; then
run "/bin/rm -rf /p4 /$HxDepots/p4 /$HxMetadata1/p4 /$HxLogs/p4" \
"Extreme Cleanup: Blasting several SDP dirs." ||\
warnmsg "Failed to blast some SDP dirs."
else
run "/bin/rm -rf /p4 /$HxDepots/p4 /$HxMetadata1/p4 /$HxMetadata2/p4 /$HxLogs/p4" \
"Extreme Cleanup: Blasting several SDP dirs." ||\
warnmsg "Failed to blast some SDP dirs."
fi
if [[ "$FirewallType" == "Firewalld" ]]; then
cd "$FirewallDir" || bail "Could not cd to: $FirewallDir"
msg "Extreme Cleanup: Removing p4*.xml firewall rules (if any).\\n"
for svcFile in p4*.xml; do
[[ -r "$svcFile" ]] || continue
svcName="${svcFile%.xml}"
run "firewall-cmd --permanent --delete-service=$svcName" \
"Deleting firewall entry for $svcName" ||\
warnmsg "Deleting firewall entry for $svcName failed."
# Firewalld renames the *.xml files to *.xml.old upon deletion of the
# rule.
if [[ -r "$PWD/${svcFile}.old" ]]; then
run "rm -f $PWD/${svcFile}.old" "Removing $PWD/${svcFile}.old" ||\
warnmsg "Deleting file $PWD/${svcFile}.old failed."
fi
done
run "firewall-cmd --reload" "Firewall reload after cleanup." ||\
warnmsg "Firewall reload failed after cleanup."
fi
if [[ "$StopAfterReset" -eq 0 ]]; then
msg "Extreme Cleanup complete. Continuing.\\n"
else
msg "Extreme Cleanup complete. Stopping.\\n"
exit 0
fi
fi
#------------------------------------------------------------------------------
# Digital asset acquisition and availability checks.
[[ ! -d "/$HxDepots" ]] && run "/bin/mkdir -p /$HxDepots"
cd "/$HxDepots" || bail "Could not cd to [/$HxDepots]."
if command -v yum > /dev/null; then
PackageManager="yum"
elif command -v apt-get > /dev/null; then
PackageManager="apt-get"
elif command -v zypper > /dev/null; then
PackageManager="zypper"
fi
if [[ -d "/etc/systemd/system" ]]; then
InitMechanism="Systemd"
elif [[ -x "/sbin/launchd" ]]; then
InitMechanism="Launchd"
elif [[ -d "/etc/init.d" ]]; then
InitMechanism="SysV"
fi
if [[ "$UpdatePackages" -eq 1 ]]; then
msg "Ensuring needed packages are installed."
if [[ "$ThisOS" != "Darwin" ]]; then
[[ "$PackageManager" == "Unset" ]] && \
bail "Could not find one of these package managers: ${!PackageList[*]}"
run "$PackageManager install -y ${PackageList[$PackageManager]}" \
"Installing these pacakges with $PackageManager: ${PackageList[$PackageManager]}" ||\
warnmsg "Not all packages installed successfully. Proceeding."
if [[ "$InstallDerivedAPIs" -eq 1 ]]; then
if ! command -v gcc > /dev/null || ! command -v g++ > /dev/null; then
msg "Warning: No gcc found in the path. You may need to install it. Please\\n check that the gcc and gcc-c++ packages are\\n installed, e.g. with:\\n\\t$PackageManager install -y gcc gcc-c++\\nIgnoring missing gcc/g++ due to '-fast'.\\n"
else
msg "Verified: gcc and g++ are available and in the PATH."
fi
else
msg "Skipping package dependency checks in -fast mode."
fi
else
warnmsg "Skipping package handling on Mac OSX/$ThisOS."
fi
fi
if [[ "$PullFromWebAsNeeded" -eq 1 ]]; then
if ! command -v curl > /dev/null; then
bail "No 'curl' found in the path. You may need to install it or adjust the PATH for the root user to find it.\\n\\n"
fi
fi
if ! command -v su > /dev/null; then
bail "No 'su' found in the path. You may need to install it or adjust the PATH for the root user to find it.\\n\\n"
fi
if [[ "$ThisArch" == "$RunArch" ]]; then
msg "Verified: Running on a supported architecture [$ThisArch]."
ApiArch=UNDEFINED_API_ARCH
case $ThisOS in
(Darwin)
ApiArch="macosx1010x86_64"
[[ "$RunGroup" == Unset ]] && RunGroup=staff
SampleDepotTar=sampledepot.mac.tar.gz
;;
(Linux)
ApiArch="linux26x86_64"
# Set a platform-specific value for RunGroup if it wasn't defined
# explicitly in a settings.cfg file.
if [[ "$RunGroup" == Unset ]]; then
if [[ -r "/etc/SuSE-release" ]]; then
RunGroup=users
else
# CentOS, RHEL, and Ubuntu default group is same as user name.
RunGroup=perforce
fi
fi
SampleDepotTar=sampledepot.tar.gz
;;
(*) bail "Unsupported value returned by 'uname -m': $ThisOS. Aborting.";;
esac
else
bail "Running on architecture $ThisArch. Run this only on hosts with '$RunArch' architecture. Aborting."
fi
# In this block, we just check that directories specified to be preserved
# with the '-p' flag actually exist, in which case we abort before further
# processing.
if [[ "$PreserveDirList" != Unset ]]; then
for d in $(echo "$PreserveDirList" | tr ',' ' '); do
preserveDir="/$HxDepots/p4/common/$d"
if [[ -d "$preserveDir" ]]; then
parentDir=$(dirname "$TmpDir/$d")
if [[ ! -d "$parentDir" ]]; then
run "/bin/mkdir -p $parentDir" "Creating parent temp dir [$parentDir]." ||\
bail "Failed to create parent temp dir [$parentDir]."
fi
fi
done
fi
if [[ "$BlastDownloadsAndBinaries" -eq 1 ]]; then
if [[ -d "$BinDir" ]]; then
run "/bin/rm -rf $BinDir" \
"Blasting helix_binaries dir [$BinDir] due to '-B'." ||\
warnmsg "Failed to blast helix_binaries dir."
for d in /tmp/downloads /tmp/p4perl; do
if [[ -d "$d" ]]; then
run "/bin/rm -rf $d" \
"Blasting $d dir due to '-B'." ||\
warnmsg "Failed to blast dir $d."
fi
done
fi
fi
if [[ ! -d "$BinDir" ]]; then
[[ "$PullFromWebAsNeeded" -eq 0 ]] && bail "BinDir [$BinDir] is missing and '-local' specified. Aborting."
run "/bin/mkdir -p $BinDir" ||\
bail "Could not create dir [$BinDir]."
cd "$BinDir" || bail "Could not cd to $BinDir."
msg "Working in [$PWD]."
run "curl -k -s -O $FTPURL/${Config['P4BinRel']}/bin.$ApiArch/p4" ||\
bail "Could not get 'p4' binary."
run "curl -k -s -O $FTPURL/${Config['P4BinRel']}/bin.$ApiArch/p4d" ||\
bail "Could not get 'p4d' binary."
run "curl -k -s -O $FTPURL/${Config['P4BinRel']}/bin.$ApiArch/p4p" ||\
bail "Could not get 'p4p' binary."
run "curl -k -s -O $FTPURL/${Config['P4BinRel']}/bin.$ApiArch/p4broker" ||\
bail "Could not get 'p4broker' binary."
run "chmod +x p4 p4d p4p p4broker" \
"Doing chmod +x for downloaded Helix binaries."
else
msg "Using existing helix_binaries dir [$BinDir]."
fi
#------------------------------------------------------------------------------
# Services Shutdown and Cleanup.
if command -v getent > /dev/null; then
if getent group "$RunGroup" > /dev/null 2>&1; then
msg "Verified: Group $RunGroup exists."
else
run "groupadd $RunGroup" "Creating group $RunGroup." ||\
bail "Failed to create group $RunGroup."
fi
fi
if id -u "$RunUser" > /dev/null 2>&1; then
msg "Verified: User $RunUser exists."
else
if command -v useradd > /dev/null; then
UserAddCmd="useradd -s /bin/bash -g $RunGroup"
# Specify the home dir only if explicitly defined in settings.cfg;
# otherwise defer to the useradd default.
[[ "$RunUserNewHomeDir" != Unset ]] && \
UserAddCmd+=" -d $RunUserNewHomeDir"
# Specify the -G value to useradd if and only if values for additional
# groups were defined in settings.cfg.
[[ -n "${Config['OSUSER_ADDITIONAL_GROUPS']}" ]] && \
UserAddCmd+=" -G ${Config['OSUSER_ADDITIONAL_GROUPS']}"
UserAddCmd+=" $RunUser"
run "$UserAddCmd" "Creating user $RunUser with command: $UserAddCmd" ||\
bail "Failed to create user $RunUser."
msg "Setting OS password for user $RunUser."
echo "${Config['Password']}" > "$TmpFile"
echo "${Config['Password']}" >> "$TmpFile"
msg "Running: passwd $RunUser"
if passwd "$RunUser" < "$TmpFile"; then
msg "Verified: Password for user $RunUser set successfully."
else
warnmsg "Failed to set password for user $RunUser."
fi
RunUserHomeDir="$(eval echo ~"$RunUser")"
if [[ -d "$RunUserHomeDir" ]]; then
msg "Verified: Home directory for user $RunUser exists."
else
run "mkdir -p $RunUserHomeDir" \
"Creating home dir for $RunUser" ||\
bail "Failed to create home directory $RunUserHomeDir for OS user $RunUser."
run "chown -R $RunUser:$RunGroup $RunUserHomeDir" \
"Ensuring $RunUser owns home dir $RunUserHomeDir." ||\
warnmsg "Failed to change ownership of home directory $RunUserHomeDir for OS user $RunUser."
fi
run "cp $ResetHome/perforce_bash_profile $RunUserHomeDir/.bash_profile" \
"Creating $RunUserHomeDir/.bash_profile." ||\
warnmsg "Failed to copy to $RunUserHomeDir/.bash_profile."
msg "Creating $RunUserHomeDir/.bashrc."
sed "s:EDITME_SDP_INSTANCE:$SDPDefaultInstance:g" \
"$ResetHome/perforce_bashrc" > "$RunUserHomeDir/.bashrc" ||\
warnmsg "Failed to copy to $RunUserHomeDir/.bashrc."
run "chown $RunUser:$RunGroup $(eval echo ~"$RunUser")/.bash_profile $(eval echo ~"$RunUser")/.bashrc" "Adjusting perms of .bash_profile and .bashrc." ||\
warnmsg "Adjusting ownership failed."
else
bail "User $RunUser does not exist, and the 'useradd' utility was not found."
fi
fi
for i in $SDPInstances; do
if [[ "$ThisOS" == "Linux" || "$ThisOS" == "Darwin" ]]; then
msg "Stopping Perforce-related servcies for Instance $i."
for svc in p4d p4broker p4p p4web p4dtg; do
processCmd="${svc}_${i}"
# This 'ps' command should work on Linux and Mac (Yosemite+ at least).
# shellcheck disable=SC2009
Pids=$(ps -u "$RunUser" -f | grep -v grep | grep "/$processCmd "| awk '{print $2}')
if [[ -z "$Pids" && $svc == p4d ]]; then
msg "$processCmd not found for p4d service; looking for _bin variant instead."
# For the p4d service, the process command may look like 'p4d_1_bin' or just 'p4d_1', so
# we check for both.
processCmd="${svc}_${i}_bin"
# shellcheck disable=SC2009
Pids=$(ps -u "$RunUser" -f | grep -v grep | grep "/$processCmd "| awk '{print $2}')
fi
if [[ -n "$Pids" ]]; then
run "kill -9 $Pids" \
"Killing user $RunUser processes for command $processCmd."
sleep 1
else
msg "Verified: No processes by user $RunUser for command [$processCmd] are running."
fi
done
fi
if [[ "$InitMechanism" == "SysV" ]]; then
cd /etc/init.d || bail "Could not cd to /etc/init.d."
msg "Removing Perforce-related SysV services in $PWD."
for svc in p4*_init; do
run "chkconfig --del $svc"
run "rm -f $svc"
done
elif [[ "$InitMechanism" == "Systemd" ]]; then
cd /etc/systemd/system || bail "Could not cd to /etc/systemd/system."
msg "Disabling and removing Perforce-related Systemd services in $PWD."
for svcFile in p4*.service; do
run "systemctl disable ${svcFile%.service}"
run "rm -f $svcFile"
done
fi
done
#------------------------------------------------------------------------------
if [[ -d "$DownloadsDir" && "$BlastDownloadsAndBinaries" -eq 1 ]]; then
run "/bin/rm -r -f $DownloadsDir" \
"Blasting downloads dir [$DownloadsDir] due to '-B'."
fi
if [[ ! -d "$DownloadsDir" ]]; then
[[ $PullFromWebAsNeeded -eq 0 ]] && bail "DownloadsDir [$DownloadsDir] is missing and '-local' specified. Aborting."
run "/bin/mkdir -p $DownloadsDir"
cd "$DownloadsDir" || bail "Could not cd to downloads dir: $DownloadsDir"
msg "Working in [$PWD]."
if [[ "$InstallDerivedAPIs" -eq 1 ]]; then
run "curl -k -s -O $FTPURL/${Config['P4APIRel']}/bin.$ApiArch/p4api.tgz" ||\
bail "Could not get file 'p4api.tgz'"
else
msg "Skipping download of p4api.tgz '-dapi' not being specified."
fi
if [[ "$SDPInstallMethod" == FTP ]]; then
run "curl -k -s -O $SDPURL" ||\
bail "Could not get SDP tar file from [$SDPURL]."
fi
if [[ "$LoadSampleDepot" -eq 1 ]]; then
run "curl -k -s -O $FTPURL/tools/$SampleDepotTar" ||\
bail "Could not get file [$SampleDepotTar]. Aborting."
if [[ "$BlastDownloadsAndBinaries" -eq 1 && -d "PerforceSample" ]]; then
run "rm -rf "PerforceSample "Blasting dir PerforceSample due to '-B'." ||\
warnmsg "Failed to cleanly remove Sample Depot dir $PWD/PerforceSample."
fi
if [[ ! -d PerforceSample ]]; then
run "tar -xzpf $SampleDepotTar" "Unpacking $SampleDepotTar in $PWD."
else
msg "Using existing extracted Sample Depot dir $PWD/PerforceSample."
fi
run "chown -R $RunUser:$RunGroup $DownloadsDir" \
"Setting ownership on downloads dir." ||\
bail "Failed to set ownership on downloads dir [$DownloadsDir]. Aborting."
else
msg "Skipping download of Sample Depot due to '-no_sd'."
fi
else
msg "Using existing downloads dir [$DownloadsDir]."
cd "$DownloadsDir" || bail "Could not cd to downloads dir: $DownloadsDir"
if [[ "$SDPInstallMethod" == FTP ]]; then
if [[ -r "$SDPTar" ]]; then
msg "Using existing SDP tarfile [$SDPTar]."
else
run "curl -k -s -O $SDPURL" ||\
bail "Could not get SDP tar file from [$SDPURL]."
fi
fi
fi
#------------------------------------------------------------------------------
# Cleanup
cd "/$HxDepots" || bail "Could not cd to [/$HxDepots]. Aborting."
msg "Working in [$PWD]."
if [[ "$HxMetadata1" == "$HxMetadata2" ]]; then
DirList="/$HxMetadata1 /$HxLogs";
else
DirList="/$HxMetadata1 /$HxMetadata2 /$HxLogs";
fi
for d in $DirList; do
if [[ ! -d "$d" ]]; then
run "/bin/mkdir -p $d" "Initialized empty dir [$d]." ||\
bail "Failed to create dir [$d]."
else
msg "Verified: Dir [$d] exists."
fi
done
if [[ $PreserveDirList != Unset ]]; then
run "/bin/mkdir -p $TmpDir" "Creating temp dir [$TmpDir]." ||\
bail "Failed to create temp dir [$TmpDir]."
for d in $(echo "$PreserveDirList" | tr ',' ' '); do
preserveDir="/$HxDepots/p4/common/$d"
if [[ -d "$preserveDir" ]]; then
parentDir=$(dirname "$TmpDir/$d")
if [[ ! -d "$parentDir" ]]; then
run "/bin/mkdir -p $parentDir" "Creating parent temp dir [$parentDir]." ||\
bail "Failed to create parent temp dir [$parentDir]."
fi
run "/bin/mv $preserveDir $TmpDir/$d" \
"Moving preserved dir $preserveDir aside for safe keeping."
else
bail "Missing expected preserve dir [$preserveDir]. Check that paths specified with '-p' are relative to /$HxDepots/p4/common."
fi
done
fi
for i in $SDPInstances; do
if [[ "$HxMetadata1" == "$HxMetadata2" ]]; then
DirList="/$HxDepots/p4/$i /$HxMetadata1/p4/$i /$HxLogs/p4/$i"
else
DirList="/$HxDepots/p4/$i /$HxMetadata1/p4/$i /$HxMetadata2/p4/$i /$HxLogs/p4/$i"
fi
run "/bin/rm -rf $DirList" \
"Blasting any existing SDP structures." ||\
bail "Failed to blast existing SDP structures."
if [[ -L "/p4/$i" ]]; then
run "/bin/rm -f /p4/$i" "Blasting symlink /p4/$i." ||\
bail "Failed to remove SDP symlink."
elif [[ -d "/p4/$i" ]]; then
run "/bin/rm -rf /p4/$i" "Blasting directory /p4/$i." ||\
bail "Failed to remove SDP instance directory /p4/$i."
fi
done
run "/bin/rm -rf /$HxDepots/p4/common" \
"Blasting SDP common folder." ||\
bail "Failed to remove SDP common folder."
if [[ -L /p4/common ]]; then
run "/bin/rm -f /p4/common" "Removing /p4/common symlink." ||\
bail "Failed to remove /p4/common symlink."
elif [[ -d /p4/common ]]; then
run "/bin/rm -rf /p4/common" "Removing /p4/common directory." ||\
bail "Failed to remove /p4/common local directory."
else
msg "Info: /p4/common did not exist as a directory or symlink."
fi
run "/bin/rm -rf $SDPHome /p4/ssl" \
"Removing old SDP Home and /p4/ssl." ||\
bail "Failed to remove old $SDPHome and /p4/ssl."
#------------------------------------------------------------------------------
# SDP Setup
if [[ "$SDPInstallMethod" == FTP ]]; then
run "tar -xzpf $DownloadsDir/$SDPTar" "Unpacking $DownloadsDir/$SDPTar in $PWD." ||\
bail "Failed to untar SDP tarfile."
elif [[ "$SDPInstallMethod" == Copy ]]; then
if [[ -r "$SDPCopyDir/$SDPTar" ]]; then
if [[ -d "$SDPHome" ]]; then
run "rm -rf $SDPHome/" \
"Removing existing SDP directory [$SDPHome]." ||\
bail "Failed to clean existing SDPHome dir: $SDPHome"
fi
cd "${SDPHome%/*}" ||\
bail "Could not cd to parent of SDPHome dir: ${SDPHome%/*}"
run "tar -xzf $SDPCopyDir/$SDPTar" \
"Extracting SDP tarball: $SDPCopyDir/$SDPTar" ||\
bail "Failed to extract SDP tarball."
cd - > /dev/null || bail "Could not cd back to: $OLDPWD"
elif [[ -r "$SDPCopyDir/Version" ]]; then
run "rsync -a --delete $SDPCopyDir/ $SDPHome" "Deploying SDP from: $SDPCopyDir" ||\
bail "Failed to rsync SDP from $SDPCopyDir."
else
bail "The SDP directory [$SDPCopyDir] contains neither an SDP tarball file ($SDPTar) nor a Version file to indicate a pre-extracted SDP tarball. Aborting."
fi
else
# SDPInstallMethod is DVCS
export PATH="$BinDir:$PATH"
export P4ENVIRO=/dev/null/.p4enviro
export P4CONFIG=.p4config.local
run "/bin/mkdir -p $SDPHome" "Creating dir $SDPHome" ||\
bail "Failed to create dir $SDPHome. Aborting."
cd "$SDPHome" || bail "Failed to cd to [$SDPHome]."
WorkshopRemote=perforce_software-sdp_${SDPInstallBranch}
run "$BinDir/p4 -s -u $WorkshopUser clone -p $WorkshopPort -r $WorkshopRemote" \
"Cloning SDP $SDPInstallBranch branch from The Workshop." ||\
bail "Failed to clone SDP from The Workshop."
run "$BinDir/p4 -s sync -f .p4ignore" \
"Force-sync .p4ignore file."
if [[ "$ShelvedChange" != Unset ]]; then
run "$BinDir/p4 -s fetch -s $ShelvedChange" \
"Fetching shelved change @$ShelvedChange from The Workshop." ||\
bail "Failed to fetch shelved change @$ShelvedChange from The Workshop."
LocalShelvedChange=$("$BinDir"/p4 -ztag -F %change% changes -s shelved -m 1)
[[ -n "$LocalShelvedChange" ]] || \
bail "Could not determine local shelved change fetched for shelved change @$ShelvedChange."
run "$BinDir/p4 -s unshelve -s $LocalShelvedChange" \
"Unshelving local shelved change @$LocalShelvedChange." ||\
bail "Failed to unshelve local shelved change @$LocalShelvedChange."
fi
unset P4ENVIRO
unset P4CONFIG
fi
if [[ -r "$SDPHome/Version" ]]; then
if [[ "$SDPInstallMethod" == DVCS ]]; then
msg "Version info not displayed as it is unreliable when using DVCS install method to get latest from the dev branch."
else
msg "SDP Version in $SDPHome is: $(cat "$SDPHome/Version")"
fi
else
bail "Cannot determine SDP Version; file $SDPHome/Version is missing."
fi
run "chown -R $RunUser:$RunGroup $SDPHome $ResetHome" \
"Changing ownership to $RunUser:$RunGroup for $SDPHome $ResetHome" ||\
bail "Failed to change ownership to $RunUser:$RunGroup."
if [[ "${Config['SimulateEmail']}" == "1" ]]; then
cd "$SDPConfigDir" ||\
bail "Could not cd to [$SDPConfigDir]."
msg "Generating custom p4_vars.template to simulate email in [$PWD]."
run "/bin/mv -f p4_vars.template p4_vars.template.orig"
run "chmod 444 p4_vars.template.orig"
sed -e "s:SDPMAIL=mailx:SDPMAIL='/bin/echo Simulated mail':g" \
-e "s:SDPMAIL=mail:SDPMAIL='/bin/echo Simulated mail':g" \
p4_vars.template.orig > p4_vars.template
msg "Changes in p4_vars.template:"
diff p4_vars.template.orig p4_vars.template
else
msg "Using standard p4_vars.template file."
fi
cd "$SDPSetupDir" ||\
bail "Could not cd to [$SDPSetupDir]."
if [[ "${Config['SimulateEmail']}" == "1" ]]; then
msg "Generating custom mkdirs.sh in $PWD."
run "/bin/mv -f mkdirs.sh mkdirs.sh.orig"
run "chmod 444 mkdirs.sh.orig"
sed -e "s:export MAIL=mailx:export MAIL='/bin/echo Simulated mail':g" \
-e "s:export MAIL=mail:export MAIL='/bin/echo Simulated mail':g" \
mkdirs.sh.orig > mkdirs.sh
else
msg "Using standard mkdirs.sh script."
fi
run "/bin/mv -f mkdirs.cfg mkdirs.cfg.orig" \
"Generating custom mkdirs.cfg in $PWD."
# The values for the P4MASTERHOST setting in the SDP mkdirs.cfg file can be
# 'DNS_name_of_master_server_for_this_instance' or
# 'DNS_name_of_master_server', depending on SDP version. Support both.
sed -e "s:=DNS_name_of_master_server_for_this_instance:=${Config['DNS_name_of_master_server']}:g" \
-e "s:=DNS_name_of_master_server:=${Config['DNS_name_of_master_server']}:g" \
-e "s:^MAILTO=.*:MAILTO=${Config['P4AdminList']}:g" \
-e "s:^MAILFROM=.*:MAILFROM=${Config['MailFrom']}:g" \
-e "s:mail.example.com:${Config['SMTPServer']}:g" \
-e "s:^CASE_SENSITIVE=.*:CASE_SENSITIVE=${Config['CaseSensitive']}:g" \
-e "s:^DB1=.*:DB1=${HxMetadata1}:g" \
-e "s:^DB2=.*:DB2=${HxMetadata2}:g" \
-e "s:^DD=.*:DD=${HxDepots}:g" \
-e "s:^LG=.*:LG=${HxLogs}:g" \
-e "s:^P4_PORT=.*:P4_PORT=SeeBelow:g" \
-e "s:^P4BROKER_PORT=.*:P4BROKER_PORT=SeeBelow:g" \
-e "s:# P4_PORT=1666:P4_PORT=${Config['P4_PORT']}:g" \
-e "s:# P4BROKER_PORT=1667:P4BROKER_PORT=${Config['P4BROKER_PORT']}:g" \
-e "s:=adminpass:=${Config['Password']}:g" \
-e "s:=servicepass:=${Config['Password']}:g" \
-e "s:ADMINUSER=perforce:ADMINUSER=${Config['P4USER']}:g" \
-e "s:OSUSER=perforce:OSUSER=$RunUser:g" \
-e "s:OSGROUP=perforce:OSGROUP=$RunGroup:g" \
-e "s:REPLICA_ID=replica:REPLICA_ID=p4d_ha_${Config['SiteTag']}:g" \
-e "s:SVCUSER=service:SVCUSER=svc_p4d_ha_${Config['SiteTag']}:g" \
mkdirs.cfg.orig > mkdirs.cfg
if [[ $UseSSL -eq 0 ]]; then
msg "Not using SSL feature due to '-no_ssl'."
sed "s/SSL_PREFIX=ssl:/SSL_PREFIX=/g" mkdirs.cfg > $TmpFile
run "mv -f $TmpFile mkdirs.cfg"
fi
chmod +x mkdirs.sh
msg "SDP Localizations in mkdirs.sh:"
diff mkdirs.sh.orig mkdirs.sh
msg "\\nSDP Localizations in mkdirs.cfg:"
diff mkdirs.cfg.orig mkdirs.cfg
# Prior to SDP r20.1, 'p4d', 'p4', and other binaries were placed in
# /<DD>/sdp/p4/common/bin. Modern SDP uses wrapper shell scripts in
# place of thoses binaries. If the wrapper script exists, skip the copy
# of the binaries.
if [[ -x "$SDPHome/Server/Unix${CBIN}/p4d" ]]; then
run "cp -f -p $BinDir/p4* $SDPHome/helix_binaries/." \
"Copying Perforce Helix binaries to $SDPHome/helix_binaries/." ||\
errmsg "Failed to copy binaries to $SDPHome/helix_binaries/."
else
run "cp -p $BinDir/p4* $SDPHome/Server/Unix${CBIN}/." \
"Copying Perforce Helix binaries to $SDPHome/Server/Unix${CBIN}/." ||\
errmsg "Failed to copy binaries to $SDPHome/Server/Unix${CBIN}/."
fi
msg "Initializing SDP instances and configuring $InitMechanism services."
for i in $SDPInstances; do
cd "$SDPSetupDir" || bail "Could not cd to [$SDPSetupDir]."
MkdirsCmd="$PWD/mkdirs.sh $i"
if grep -q Version= mkdirs.sh > /dev/null 2>&1; then
[[ -n "$ServerID" ]] && MkdirsCmd+=" -s $ServerID"
[[ -n "$ServerType" ]] && MkdirsCmd+=" -t $ServerType"
[[ -n "$TargetServerID" ]] && MkdirsCmd+=" -S $TargetServerID"
else
[[ -n "$ServerID" || "$ServerType" != "p4d_master" || -n "$TargetServerID" ]] && \
warnmsg "Settings for ServerID, ServerType, and TargetServerID will be ignored due to too-old version of mkdirs.sh. Use SDP r20.1+ to take advantage of these configuration settings."
fi
log="$PWD/mkdirs.${i}.log"
msg "Initializing SDP instance [$i], writing log [$log]."
msg "Running: $MkdirsCmd"
$MkdirsCmd > "$log" 2>&1
cat "$log"
if [[ "$InitMechanism" == "SysV" ]]; then
msg "\\nConfiguring $InitMechanism services.\\n"
cd /etc/init.d || bail "Could not cd to [/etc/init.d]."
for svc in p4broker p4d; do
initScript=${svc}_${i}_init
if [[ -x /p4/${i}/bin/$initScript ]]; then
run "ln -s /p4/${i}/bin/$initScript"
run "chkconfig --add $initScript"
run "chkconfig $initScript on"
fi
done
elif [[ "$InitMechanism" == "Systemd" ]]; then
msg "\\nConfiguring $InitMechanism services.\\n"
cd /etc/systemd/system || bail "Could not cd to /etc/systemd/system."
for binary in p4broker p4d; do
svcName="${binary}_${i}"
svcFile="${svcName}.service"
# If the version of SDP deployed is 2020.1+, it will have templates
# for systemd unit files. Use those if found, otherwise use the
# baseline templates that come with the Helix Installer.
svcTemplate="$SystemdTemplatesDir/${binary}_N.service.t"
[[ ! -r "$svcTemplate" ]] && \
svcTemplate="$ResetHome/${binary}_N.service.t"
sed -e "s:__INSTANCE__:${i}:g" \
-e "s:__OSUSER__:$RunUser:g" \
"$svcTemplate" > "$svcFile" ||\
bail "Failed to generate $PWD/$svcFile from template $svcTemplate."
run "systemctl enable $svcName" "Enabling $svcName to start on boot." ||\
warnmsg "Failed to enable $svcName with $InitMechanism."
done
run "systemctl daemon-reload" "Reloading systemd after generating Systemd unit files." ||\
warnmsg "Failed to reload systemd daemon."
fi
run "chown $RunUser:$RunGroup /$HxDepots" \
"Adjusting ownership of /$HxDepots to $RunUser:$RunGroup." ||\
bail "Failed to adjust ownership of /$HxDepots."
for d in "/$HxDepots/p4" "$ResetHome" "$BinDir"; do
if [[ -d "$d" ]]; then
run "chown -R $RunUser:$RunGroup $d" \
"Adjusting ownership of $d to $RunUser:$RunGroup." ||\
bail "Failed to adjust ownership of $d."
fi
done
msg "\\nGenerating broker config for instance $i.\\n"
su -l "$RunUser" -c "$CBIN/gen_default_broker_cfg.sh ${i} > $CCFG/p4_${i}.broker.cfg"
done
if [[ "$UseSSL" -eq 1 ]]; then
msg "Generating /p4/ssl/config.txt SSL config file for autogen cert."
sed -e "s/REPL_DNSNAME/helix/g" /p4/ssl/config.txt > "$TmpFile" ||\
bail "Failed to substitute content in /p4/ssl/config.txt."
run "mv -f $TmpFile /p4/ssl/config.txt"
msg "Contents of /p4/ssl/config.txt:\\n$(cat /p4/ssl/config.txt)\\n"
fi
if [[ "$PreserveDirList" != Unset ]]; then
for d in $(echo "$PreserveDirList" | tr ',' ' '); do
preserveDir="/$HxDepots/p4/common/$d"
tempCopyDir="$TmpDir/$d"
run "rsync -av --exclude=.p4root --exclude=.p4ignore --exclude=.p4config $tempCopyDir/ $preserveDir" \
"Restoring $preserveDir" ||\
bail "Failed to restore $preserveDir."
done
run "/bin/rm -rf $TmpDir" "Cleanup: Removing temp dir [$TmpDir]." ||\
bail "Failed to remove temp dir [$TmpDir]."
fi
#------------------------------------------------------------------------------
# Install P4Perl and P4Python if the install scripts are available in the
# SDP Package. If the install_sdp_*.sh scripts are not available, generate
# a warning message.
if [[ "$InstallDerivedAPIs" -eq 1 ]]; then
if [[ -x "$SDPSetupDir/install_sdp_python.sh" ]]; then
msg "\\nInstalling P4Python for SDP."
su -l "$RunUser" -c "$SDPSetupDir/install_sdp_python.sh" ||\
errmsg "Failed to install P4Python."
else
warnmsg "SDP P4Python installer not available in SDP Package and '-dapi' was used."
fi
if [[ -x "$SDPSetupDir/install_sdp_perl.sh" ]]; then
msg "\\nInstalling P4Perl for SDP."
su -l "$RunUser" -c "$SDPSetupDir/install_sdp_perl.sh" ||\
errmsg "Failed to install P4Perl."
else
warnmsg "SDP P4Perl installer not available in SDP Package and '-dapi' was used."
fi
fi
msg "Preparing to run Sample Depot configuration script."
if [[ ! -d "$ResetHome" ]]; then
run "/bin/mkdir -p $ResetHome" "Creating reset home dir [$ResetHome]." ||\
bail "Could not create reset home dir [$ResetHome]. Aborting."
fi
cd "$ResetHome" || bail "Could not cd to $ResetHome. Aborting."
#------------------------------------------------------------------------------
# Add sudoers to /etc/sudoers.d if the directory exists and the user file doesn't.
if [[ -d "${SudoersFile%/*}" && ! -e "$SudoersFile" ]]; then
msg "Adding $RunUser to sudoers."
if echo -e "$SudoersEntry" > "$SudoersFile"; then
run "chmod 0400 $SudoersFile" "Setting perms on sudoers file, $SudoersFile." ||\
warnmsg "Failed to set perms on $SudoersFile."
else
warnmsg "Failed to create $SudoersFile."
fi
fi
#------------------------------------------------------------------------------
# Load the Sample Depot training data set, useful for eval/demo installs,
# PoCs, training, etc.
if [[ "$LoadSampleDepot" -eq 1 ]]; then
for i in $SDPInstances; do
msg "Configuring Sample Depot for SDP on Instance $i."
if su -l "$RunUser" -c "$ResetHome/configure_sample_depot_for_sdp.sh -i $i -d $ResetHome -u $RunUser"; then
msg "\\nSample Depot configured successfully for instance $i.\\n"
else
bail "Failed to load the Sample Depot."
fi
done
else
msg "\\nSkipping configuration of Sample Depot due to '-no_sd'.\\n"
fi
#------------------------------------------------------------------------------
# Add Perforce Package Repository to repo list (YUM and APT only).
if [[ "$AddPerforcePackageRepo" -eq 1 ]]; then
if [[ -d "${P4YumRepo%/*}" ]]; then
if [[ -n "$ThisOSMajorVersion" ]]; then
run "rpm --import $PerforcePackagePubkeyURL" \
"Adding Perforce's packaging key to RPM keyring." ||\
warnmsg "Failed to add Perforce packaging key to RPM keyring."
msg "Generating $P4YumRepo."
if ! echo -e "[perforce]\\nname=Perforce\\nbaseurl=$PerforcePackageRepoURL/yum/rhel/$ThisOSMajorVersion/x86_64\\nenabled=1\\ngpgcheck=1\\n" > "$P4YumRepo"; then
warnmsg "Unable to generate $P4YumRepo."
fi
else
warnmsg "Skipping generation of $P4YumRepo due to lack of OS Major Version info."
fi
elif [[ -d "${P4AptGetRepo%/*}" ]]; then # /etc/apt/sources.list.d
if [[ -n "$ThisOSName" && -n "$ThisOSDistro" ]]; then
msg "Acquiring Perforce's package repository public key."
if wget -qO - $PerforcePackagePubkeyURL > $TmpPubKey; then
msg "Public key for Perforce package repo acquired as: $TmpPubKey"
msg "Adding Perforce's packaging key to APT keyring."
if apt-key add < /tmp/perforce.pubkey; then
msg "APT keyring added successfully."
else
warnmsg "Failed to add Perforce packaging key to APT keyring."
fi
msg "Doing apt-get update after adding the new perforce.list repo."
if apt-get update; then
msg "Update completed."
else
warnmsg "What if apt-get did not return a zero exit code."
fi
else
warnmsg "Failed to acquire Perforce package repo public key."
fi
msg "Generating $P4AptGetRepo."
if ! echo "deb $PerforcePackageRepoURL/apt/$ThisOSName $ThisOSDistro release" > "$P4AptGetRepo"; then
warnmsg "Unable to generate $P4AptGetRepo."
fi
else
warnmsg "Skipping generation of $P4AptGetRepo due to lack of OS Name and Distro info."
fi
else
warnmsg "No Perforce supported package repository, RPM or APT, found to add. Skipping."
fi
else
msg "Skipping addition of Perforce Package repository due to '-no_ppr'."
fi
#------------------------------------------------------------------------------
# Add Firewall rules (Firewalld only).
if [[ "$FirewallType" == "Firewalld" ]]; then
msg "\\nConfiguring $FirewallType services.\\n"
cd "$FirewallDir" || bail "Could not cd to $FirewallDir."
for i in $SDPInstances; do
for binary in p4broker p4d; do
svcName="${binary}_${i}"
svcFile="${svcName}.xml"
sed -e "s:__INSTANCE__:${i}:g" \
-e "s:__P4PORT__:${Config['P4_PORT']}:g" \
-e "s:__P4BROKER_PORT__:${Config['P4BROKER_PORT']}:g" \
"$ResetHome/${binary}_N.xml.t" > "$svcFile" ||\
bail "Failed to generate $PWD/$svcFile."
run "firewall-cmd --add-service=$svcName" \
"Adding firewall entry for $svcName" ||\
warnmsg "Adding firewall entry for $svcName failed."
done
run "firewall-cmd --runtime-to-permanent" \
"Permanently adding firewall entries" ||\
warnmsg "Adding permanent firewall entries failed."
done
run "firewall-cmd --reload" "Firewall reload." ||\
warnmsg "Firewall reload failed."
run "iptables-save" "Showing firewall rules." ||\
warnmsg "Showing firewall failed."
elif [[ "$FirewallType" == "IPTables" ]]; then
warnmsg "IPtables firewall detected, but not handled."
fi
#------------------------------------------------------------------------------
# Load crontab.
if [[ "$InstallCrontab" -eq 1 ]]; then
CrontabFile="$SDPCrontabDir/crontab.$RunUser.${HOSTNAME%%.*}"
if [[ -f "/p4/p4.crontab" ]]; then
run "mv /p4/p4.crontab $CrontabFile" ||\
errmsg "Failed to move crontab file to $CrontabFile."
run "crontab -u $RunUser $CrontabFile" "Setting crontan for $RunUser." ||\
errmsg "Failed to load crontab."
else
warnmsg "No /p4/p4.crontab file found. Skipping load of crontab."
fi
else
msg "Not loading crontab due to '-no_cron'."
fi
#------------------------------------------------------------------------------
# Apply Support-recommended OS Tweaks to Linux kernel paraemters
# (e.g. KHugePage, etc.)
if [[ "$RunOSTweaks" -eq 1 ]]; then
if [[ "$ThisOS" == "Linux" ]]; then
if [[ -x "$OSTweaksScript" ]]; then
run "$OSTweaksScript" "Making recommended Linux OS tweaks." ||\
warnmsg "Non-zero exit code ($CMDEXITCODE) returned from $SDPSetupDir/os_tweaks.sh"
else
msg "Not making OS tweaks, $OSTweaksScript is missing or not executable."
fi
else
msg "Skipping OS tweaks on non-Linux OS."
fi
else
msg "Skipping OS tweaks due to '-no_tweaks'."
fi
if [[ "$ErrorCount" -eq 0 ]]; then
if [[ "$WarningCount" -eq 0 ]]; then
msg "\\nSUCCESS: SDP Configuration complete."
else
msg "\\nSUCCESS: SDP Configuration complete with $WarningCount warnings."
fi
if [[ "$MultiRun" -eq 0 ]]; then
run "chmod -x $ResetHome/reset_sdp.sh" \
"Removing execute permissions from $ThisScript." ||\
warnmsg "Failed to remove execute permissions from $ResetHome/reset_sdp.sh"
run "mv $ResetHome/reset_sdp.sh $ResetHome/reset_sdp.sh.txt" \
"Renamed to clarify this should not be executed again." ||\
warnmsg "Failed to rename to $ResetHome/reset_sdp.sh.txt"
else
msg "Self-disable safety feature ignored due to '-M'."
fi
else
msg "\\nSDP Configuration completed, but with $ErrorCount errors and $WarningCount warnings."
fi
exit "$ErrorCount"
| # | Change | User | Description | Committed | |
|---|---|---|---|---|---|
| #219 | 30495 | C. Thomas Tyler | Added config default in case HxCheckpoints isn't defined. | ||
| #218 | 30494 | C. Thomas Tyler | Added '-m <ShallowCloneRevs>' option. | ||
| #217 | 30493 | C. Thomas Tyler | Fixed issue with '-v' option to make it more reliable. | ||
| #216 | 30491 | C. Thomas Tyler |
Changed so '-local' implies '-no_ppr'. #review-30492 @mzinthefer |
||
| #215 | 30489 | C. Thomas Tyler |
Added sos package to yum and zypper package managers; it is not reliably available on apt. Added sysstat package to apt, yum, and zypper package managers. Note that we don't reference 'dnf' (the new 'yum' on RHEL systems) because 'yum' still works and works across versions. |
||
| #214 | 30488 | C. Thomas Tyler | Added tuned as a standard package. | ||
| #213 | 30487 | C. Thomas Tyler |
Avoid firewalld errors if firewalld is not running. This was done in a way as to make it easier to add support for other firewalls (ufw?) later. |
||
| #212 | 30486 | C. Thomas Tyler | Pass '-no_systemd' option thru to mkdirs.sh | ||
| #211 | 30470 | C. Thomas Tyler | Added logic to pass '-no_enable' option thru to mkdirs.sh. | ||
| #210 | 30465 | C. Thomas Tyler | Improved auditability for getting Helix binaries. | ||
| #209 | 30464 | C. Thomas Tyler | Typo. | ||
| #208 | 30463 | C. Thomas Tyler |
Fixed regression in 2024.1 where specifying P4BinRel and APIBinRel in settings.cfg to older-than-default p4d versions did not work as expected; r24.1 was always pulled. |
||
| #207 | 30462 | C. Thomas Tyler | Re-added accidentally deleted SDPURL setting. | ||
| #206 | 30461 | C. Thomas Tyler | More URL adjustments. | ||
| #205 | 30460 | C. Thomas Tyler | Adjusted URLs, fixed timestamp. | ||
| #204 | 30459 | C. Thomas Tyler |
Change URLs in curl calls in docs and code to avoid Apache redirects. Also removed '-s' option from curl calls. |
||
| #203 | 30404 | C. Thomas Tyler |
Added support for Rocky 9 in reset_sdp.sh. Added Rocky 9 to regression test suite. Changed from using 'yum' to 'dnf' on Rocky, to be trendy. Changed base OS template to match what SDP uses for Rocky 8. |
||
| #202 | 30399 | C. Thomas Tyler | Adapted to SDP default value of 'localhost' for DNS name of commit server. | ||
| #201 | 30398 | C. Thomas Tyler | Add '-no_enable' option to avoid enabling installed services. | ||
| #200 | 30397 | C. Thomas Tyler |
Adjust location of generated crontab file to: /p4/common/etc/cron.d/crontab.<user>.<short_hostname>.<instance>. |
||
| #199 | 30365 | C. Thomas Tyler | Added support for separate HxCheckpoints volume. | ||
| #198 | 30364 | C. Thomas Tyler | Changed default Helix Core version to r24.1. | ||
| #197 | 30332 | C. Thomas Tyler | Tweaked formatting of log line. | ||
| #196 | 30331 | C. Thomas Tyler | Added built-in logging. | ||
| #195 | 30330 | C. Thomas Tyler |
More adaptation to SDP 2024.1 changes. Now deferrring to SDP for download of derived APIs. |
||
| #194 | 30325 | C. Thomas Tyler |
Adapted to SDP 2024.1, supporting multiple architectures to include aarch64 e.g. Graviton. |
||
| #193 | 30322 | C. Thomas Tyler | Fixed inaccuracy in error message if running on unsupported architecture. | ||
| #192 | 30225 | C. Thomas Tyler | Normalized sed statements to use '|' separator. | ||
| #191 | 30213 | C. Thomas Tyler |
Added '-si <SDPInstance>' as a command line option, so there is one less reason to need to do the more complex 'Configured' installation, especially for a proxy or stand-alone broker. #review-30214 |
||
| #190 | 30192 | C. Thomas Tyler | Adapated to change in SDP default password. | ||
| #189 | 30191 | C. Thomas Tyler | Typo | ||
| #188 | 30190 | C. Thomas Tyler | Completed apt repo update for Ubuntu. | ||
| #187 | 30189 | C. Thomas Tyler | Updated APT keyging magic for Perforce Package Repository for Ubuntu. | ||
| #186 | 30045 | C. Thomas Tyler | 2023.2 release; changed default version to 2023.2. | ||
| #185 | 29816 | C. Thomas Tyler |
Changed preferred delimeter for sed calls from a mix of ':', '@', and '|' to always use '|', since there are no values we use for which '|' is acceptable. This fixes an issue where certain values, e.g. an SMTP server, might include a port number, e.g. smtp.p4demo.com:587 -- the ':' would break when the 'sed' was used. #review-29817 @will_kreitzmann |
||
| #184 | 29814 | C. Thomas Tyler |
Fixed bug: Wrong/root ownership of 'downloads' dir if '-no_sd' used. #review-29815 |
||
| #183 | 29698 | C. Thomas Tyler |
Changed 'curl' commands referencing Workshop to use '-L'. Updated stable version numbers in README.md to use new versions with corrected URLs. |
||
| #182 | 29615 | C. Thomas Tyler |
Set default to r23.1. Removed '-k' from curl calls. |
||
| #181 | 29447 | C. Thomas Tyler | Added 'bc' to standard package list. | ||
| #180 | 29389 | C. Thomas Tyler | Add '--help' alias for '-man' option. | ||
| #179 | 29362 | C. Thomas Tyler | Updated default Helix Core version from r22.1 -> r22.2. | ||
| #178 | 29339 | C. Thomas Tyler | Removed superfluous error message. | ||
| #177 | 28887 | C. Thomas Tyler |
reset_sdp.sh v4.11.3: Fixed bogus message regarding verify_sdp.sh when '-v' was not specified. If the '-v' was specified, the scirpt correctly executed the 'verify_sdp.sh' script with the correct "skip test" list to avoid errors. However, if '-v' was not specified, a bogus message was displayed indicating verify_sdp.sh was not available. With this change: * If '-v' is not specified, no output about verify_sdp.sh is displayed at all (as was the original intent). * If '-v' is specified and verify_sdp.sh is not avaialble, the message disaplyed about it not being there is now an error rahter than an informational message. #review-28888 @rwillyoung |
||
| #176 | 28834 | C. Thomas Tyler | Updated default P4D version to r22.1. | ||
| #175 | 28833 | C. Thomas Tyler |
reset_sdp.sh v4.11.2: Fixed issue where -H/-T flags worked but equivalent settings in settings.cfg did not take. |
||
| #174 | 28769 | C. Thomas Tyler | Fixed issue with root ownership of mail simulator. | ||
| #173 | 28721 | Andy Boutte | Adding firewalld template for p4p | ||
| #172 | 28662 | C. Thomas Tyler |
Added support for SELinux in enforcing mode. Enhanced documentation, including notes about SELinux handling. |
||
| #171 | 28582 | C. Thomas Tyler |
reset_sdp.sh v4.9.0: Added '-no_sudo' option. Added '-no_firewall' option. Fixed minor issue where 'systemctl' commands try to execute when systemctl isn't avail. Added test coverage in test_hi.sh. |
||
| #170 | 28408 | C. Thomas Tyler | Refined Blast logic a bit further. | ||
| #169 | 28407 | C. Thomas Tyler |
Minor cleanup of logic blasting 'perforce' user pids. Fixed formatting issues. |
||
| #168 | 28406 | C. Thomas Tyler | Adjusted issue with ownership of /p4/ssl/config.txt file. | ||
| #167 | 28405 | C. Thomas Tyler | Minor code cleanup and refinement of '-B'. | ||
| #166 | 28404 | C. Thomas Tyler | Tweaked generated email simulator. | ||
| #165 | 28403 | C. Thomas Tyler | Adjusted placement of email simulator logic. | ||
| #164 | 28402 | C. Thomas Tyler | Fixed issues with '-B' (blast mode) not cleaning up some dirs. | ||
| #163 | 28401 | C. Thomas Tyler | Rolled back removal of '-k' to curl for now. | ||
| #162 | 28400 | C. Thomas Tyler | Fixed logic to generate mail simulator wrapper script. | ||
| #161 | 28399 | C. Thomas Tyler | Downgraded warning to info re: using ServerType as ServerID for proxy/broker. | ||
| #160 | 28396 | C. Thomas Tyler | Changed default Helix Core binaries version to r21.2. | ||
| #159 | 28394 | C. Thomas Tyler |
Fail faster if CaseSensitive is set to 0 in the config file and the Sample Depot data set is to be loaded. The Sample Depot data set is not supported for a case-insensitive server. |
||
| #158 | 28393 | C. Thomas Tyler |
Added error message if conditions for HI-54 are detected -- i.e. if OS is RHEL/CentOS/Rocky Linux 8.x and SELinux is enabled. |
||
| #157 | 28392 | C. Thomas Tyler | Fixed cert generation issue. | ||
| #156 | 28389 | C. Thomas Tyler | Dropped insecure '-k' option from curl commands. | ||
| #155 | 28388 | C. Thomas Tyler | Fixed bootstrapping issue with '-ls' (limited sudo) option. | ||
| #154 | 28387 | C. Thomas Tyler |
Corrected issue with generating SSL certificates on proxy-only or broker-only hosts. |
||
| #153 | 28266 | C. Thomas Tyler |
Improved support for proxy-only hosts. #review-28267 @rwillyoung |
||
| #152 | 28120 | C. Thomas Tyler |
Added -no_systemd option to avoid using systemd. This is useful for operating in containerized test environments where systemd is not available. |
||
| #151 | 28094 | C. Thomas Tyler | Corrected package list for Ubuntu. | ||
| #150 | 27985 | C. Thomas Tyler |
Added support for running Unsupported (resurrected) SDP script install_sdp_python.sh if it exists in the SDP package. |
||
| #149 | 27981 | C. Thomas Tyler | Fixed doc typos. | ||
| #148 | 27980 | C. Thomas Tyler | Updated default P4D to r21.1 from r20.1. | ||
| #147 | 27930 | C. Thomas Tyler |
Added required 'which' package which is no longer reliably available on minimal OS installations. |
||
| #146 | 27553 | C. Thomas Tyler |
Spell check only. Non-functional changes. Docs udpated. Fixed typos in comments and messages, including generated settings.cfg files. |
||
| #145 | 27419 | C. Thomas Tyler |
Added '-v' option to run verify_sdp.sh with various options. Added test and doc for same. The options to verify_sdp.sh are dependent on options to reset_sdp.sh. Enabled configure_sample_depot_for_sdp.sh to work with non-default mount points. |
||
| #144 | 27387 | C. Thomas Tyler |
reset_sdp.sh v4.3.3: * Updated logic for loading crontab to work with latest SDP, which changed location of generated SDP crontab files. |
||
| #143 | 27377 | C. Thomas Tyler | Fixed path to sudoers file. | ||
| #142 | 27376 | C. Thomas Tyler | Added removal of sudoers file to Extreme Cleanup mode. | ||
| #141 | 27374 | C. Thomas Tyler | Added '-ls' (limited sudo) option. | ||
| #140 | 27305 | C. Thomas Tyler | Added rsync package to all platforms. | ||
| #139 | 27299 | C. Thomas Tyler | Added '-H <hostname>' and '-T <timezone>' options and cfg settings. | ||
| #138 | 27283 | C. Thomas Tyler | Added '-no_tweaks' option to skip running SDP os_tweaks.sh script. | ||
| #137 | 27282 | C. Thomas Tyler |
Enhanced so ServerID, ServerType, and TargetServerID only apply if mkdirs.sh is new enough to support them. Added warning message if those settings are defined and an old SDP is used. Tweaked 'chown' logic to only chown existing directories. |
||
| #136 | 27259 | C. Thomas Tyler |
reset_sdp.sh v4.0.0: * Added config settings: ServerID, ServerType, TargetServerType * Enhanced internal docs. * Enhanced docs for '-local' flag. * Added '-dapi' flag to install derived APIs (P4Perl/P4Python). If this flag is used, failures to build P4Perl and/or P4Python are reported as errors. * Tweaked '-fast' to now mean "skip package installations," and documented as such. |
||
| #135 | 27242 | C. Thomas Tyler | reset_sdp.sh v3.23.4: Cosmetic changes and fixed typo in config file. | ||
| #134 | 27241 | C. Thomas Tyler | reset_sdp.sh v3.23.3: No functional change; code cosmetics. | ||
| #133 | 27227 | C. Thomas Tyler |
Refinement for consecutive test runs where owner changes between tests. The configure_sample_depot_for_sdp.sh will fail with "Permission denied" errors in regression test suite runs after the first when ownership changes. |
||
| #132 | 27225 | C. Thomas Tyler | Refined narrowing logic. | ||
| #131 | 27222 | C. Thomas Tyler |
reset_sdp.sh v3.23.0: * Narrowed scope of 'chown -R' command to /hxdepots/p4 to avoid .snapshot/lost+found dirs. |
||
| #130 | 27157 | C. Thomas Tyler | Adapted to use SDP 2020.1 systemd service file templates if they exist. | ||
| #129 | 27136 | C. Thomas Tyler | Adjusted to not deploy the systemd unit file for p4p. | ||
| #128 | 27031 | C. Thomas Tyler |
Updated adaptation to SDP r20.1 changes coming soon. This change has no impact for SDP 2019.3. |
||
| #127 | 26970 | C. Thomas Tyler |
Adjustments to work with SDP r20.1: * Adapted to new stage area for exes. * Adapted to changes in mkdirs.cfg. |
||
| #126 | 26969 | C. Thomas Tyler | Changed Helix Core to r20.2 default release. | ||
| #125 | 26895 | C. Thomas Tyler | Corrected crontab set command to account for running as root. | ||
| #124 | 26893 | C. Thomas Tyler |
Silently ignore install_sdp_p4<perl,python>.sh if they do not exist. Added systemd daemon reload. |
||
| #123 | 26891 | C. Thomas Tyler |
Added loading of crontab for configured OS user. Added '-no_cron' flag to disable new default crontab loading behavior. |
||
| #122 | 26890 | C. Thomas Tyler |
For '-d <sdp_dir>' flag: * Adjusted default value to '/sdp' per docs. * Changed rsync to include '--delete' flag. |
||
| #121 | 26889 | C. Thomas Tyler |
Tweaks to reset_sdp.sh: * Fixed minor output bug. * Renamed SDPDir to SDPCopyDir for clarity. * Improved initialization for SDPCopyDir. |
||
| #120 | 26887 | C. Thomas Tyler | Fixed typo in comment; non-functional change. | ||
| #119 | 26828 | C. Thomas Tyler | Adjusted for variation in format of Hx* settings. | ||
| #118 | 26821 | C. Thomas Tyler | For RHEL/CentOS family, added major OS version detection for RHEL/CentOS 8. | ||
| #117 | 26817 | C. Thomas Tyler | Fixed '-B' (blast) logic bug when using multiple storage volumes. | ||
| #116 | 26799 | C. Thomas Tyler |
Added '-M' multi-run option to disable the 'run once' safety feature, to simplify multiple tests. |
||
| #115 | 26784 | C. Thomas Tyler |
reset_sdp.sh v3.17.0: Made /hx* mount points configurable in settings.cfg, and updated documentation accordingly. Added support for configuring /hxmetadata1 and /hxmetadata2 with different values. Added test coverage for changing /hxdepots from the default. Enhanced test suite. TEST FAIL NOTE: As of this change, tests are succeeding on all platforms except CentOS 6. Failures are in the test suite infrastructure, not related to this change. |
||
| #114 | 26625 | C. Thomas Tyler |
Fixed bug installing with '-d' install method (mainly used for Battle School custom installs). |
||
| #113 | 26604 | C. Thomas Tyler | Non-functional changes to maintain shellcheck compliance. | ||
| #112 | 26576 | C. Thomas Tyler |
Fixed order-of-operations issue due to recent changes in SDP; the logic to implement 'sudo' as required to call 'systemd' wrappers now requires the sudo to be called before the call to configure_sample_depot.sh. Refined firewall handling logic. |
||
| #111 | 26565 | C. Thomas Tyler | Set password for OSUSER to same as P4USER if OSUSER needs to be created. | ||
| #110 | 26564 | C. Thomas Tyler | Bumped version id for last change. | ||
| #109 | 26562 | C. Thomas Tyler | Corrected chmod to be a chown as intended. | ||
| #108 | 26557 | C. Thomas Tyler |
Changed default Helix Core to r20.1. Updated docs. |
||
| #107 | 26181 | C. Thomas Tyler | Corrected arg to '-d'. | ||
| #106 | 26180 | C. Thomas Tyler |
Enhanced '-d <sdp_dir>' argument to use an SDP.Unix.tgz tarball in the specified directory if found, otherwise it reverts to current behavior of using a pre-extracted sdp directory tree. Added logic to display the SDP version used unless DVCS method is used (which case the Version will be unrelaible, as it s the latest from the dev branch). Corrected doc inconsistencies. |
||
| #105 | 26179 | C. Thomas Tyler |
Tweaked hardcoded site tag ref to use settings.cfg. Other cosmetic fixes. |
||
| #104 | 26178 | C. Thomas Tyler |
Doc updates and variable substitutions. No functional changes. |
||
| #103 | 26177 | C. Thomas Tyler | Updated Helix binaries to 2019.2.1885864 (2019/11/18) | ||
| #102 | 26020 | C. Thomas Tyler |
Added P4USER setting to settings.cfg to enable super user to be changed from the default. |
||
| #101 | 26019 | C. Thomas Tyler | Enabled Sample Depot install with non-default OSUSER. | ||
| #100 | 26016 | C. Thomas Tyler |
Tweaked logic for creation of firewalld files to enable potential future support of multi-instance handling. |
||
| #99 | 26015 | C. Thomas Tyler | Follow on to change @26009, removal of bogus extra setting. | ||
| #98 | 26014 | C. Thomas Tyler |
Fix issue with systemd files when OSUSER is not perforce. Also fixed issue with '-X' mode cleaning up firewalld files. |
||
| #97 | 26009 | C. Thomas Tyler | Removed bogus extra setting in generated settings.cfg. | ||
| #96 | 26006 | C. Thomas Tyler |
Enhanced format of config file to separate settings that must be changed, should be changed, and should not be changed for PoC and production bootstrapping installs, with comments noting that no changes is needed for demo installs. |
||
| #95 | 26004 | C. Thomas Tyler |
Added more configurable options to settings.cfg: OSUSER - OS user for p4d to run as, defaults to perforce. OSGROUP - primary group for OSUSER, w/ platform-specific defaults. OSUSER_HOME - home dir for OSUSER, default /home/perforce. OSUSER_ADDITIONAL_GROUPS - Add'l groups for OSUSER, no default. |
||
| #94 | 26003 | C. Thomas Tyler |
Changed default config file referenced in docs to 'settings.cfg', to better match how it is used in practice and to make things just a bit easier. |
||
| #93 | 25995 | C. Thomas Tyler |
Changed to use only https (no more http). All curl commands use '-k' for robustness. Changed default install method to tarfile using the consistently named sdp.Unix.tgz file name. Eliminated '-t' flag; cloning is now done only when '-b' is used. Removed command attempting to change ownership of /hxdepots/reset dir to 'perforce' before that user exists. Better if that folder remains root-owned in any case, as only root can run it. |
||
| #92 | 25992 | C. Thomas Tyler | Follow on to change @25915 fixing issue with firewalld conf. | ||
| #91 | 25991 | C. Thomas Tyler |
Added 'mailx' to package list for 'yum' systems. Did not added roughly corresponding 'bsd-mailx' to apt-get systems due to interactive nature. No pacakge changes for zypper either. |
||
| #90 | 25988 | C. Thomas Tyler | Updated default SDP tarball packge to install if '-t default' is used. | ||
| #89 | 25915 | C. Thomas Tyler |
Fixed issue with firewalld configuration on RHEL/CentOS 7 systems. Changed '-X' extreme cleanup to now clear firewalld rules. Added missing mention of firewalld config in documentation. |
||
| #88 | 25889 | C. Thomas Tyler |
Tweaked 'useradd' command to add explicit '-s /bin/bash' flag, as needed to ensure the command shell for the 'perforce' user is bash. This is to support Ubuntu 18, which seems to default to /bin/sh for new accounts. |
||
| #87 | 25856 | C. Thomas Tyler |
Fixed bug with 'apt-get' keyring setup on Ubuntu. Added 'apt-get update' following addition of Perforce package repository. |
||
| #86 | 25854 | C. Thomas Tyler |
Introduced new 'Static Data' internal block in the script, for configuration of static load data in associative arrays. |
||
| #85 | 25818 | C. Thomas Tyler | Added '-no_ppr' flag to skip addition of Perforce Package repo. | ||
| #84 | 25817 | C. Thomas Tyler | Fixed typo in error message. | ||
| #83 | 25815 | C. Thomas Tyler |
Added support for configuring Sample Depot with non-default instance name. |
||
| #82 | 25813 | C. Thomas Tyler | Fixed bug with firewall not working for non-default port. | ||
| #81 | 25756 | C. Thomas Tyler | Minor tweaks to internal variable names. | ||
| #80 | 25753 | C. Thomas Tyler |
Added code to call SDP os_tweaks.sh. Regenerated command summary file. |
||
| #79 | 25752 | C. Thomas Tyler |
reset_sdp.sh v3.5.0: Enhanced to support non-default ports in systemd service files. Enhanced logic handling download of Helix Installer supplemental files. Skips download of Sample Depot if '-no_sd' is specified. (HI-9). Skips download of P4API if '-fast' is specified. (HI-9) Removed redundant check for +x on files. Enhanced '-B' processing to blast extracted Sample Depot. Added logic to disable reset_sdp.sh after successful execution. (HI-5) Tweaked REQUIREMENTS docs. |
||
| #78 | 25728 | C. Thomas Tyler | Adjustment to Ubuntu public keyring handling. | ||
| #77 | 25726 | C. Thomas Tyler | Fixed typo bug affecting only Ubuntu 16 distro. | ||
| #76 | 25723 | C. Thomas Tyler | Updated default Helix Core software version r18.2 -> r19.1. | ||
| #75 | 25638 | C. Thomas Tyler |
Cosmetic changes. Enhanced doc for password in generated config file when used to bootstrap production. |
||
| #74 | 25598 | C. Thomas Tyler | Changed default SDP version for tarball installs. | ||
| #73 | 25497 | C. Thomas Tyler |
Fixed bug where MAILFROM email setting wasn't taking effect. Added 'MailFrom' setting. |
||
| #72 | 25496 | C. Thomas Tyler | Added '-R' reset option to stop afer doing reset logic. | ||
| #71 | 25493 | C. Thomas Tyler | Fixed extra-slash issue. | ||
| #70 | 25492 | C. Thomas Tyler | Fixed issues with parameterization of the instance. | ||
| #69 | 25491 | C. Thomas Tyler | Corrected variable name. | ||
| #68 | 25490 | C. Thomas Tyler | Parameterized case sensitivity setting. | ||
| #67 | 25489 | C. Thomas Tyler | Enhanced to parameterize SDP instance name. | ||
| #66 | 25488 | C. Thomas Tyler | Updated version. | ||
| #65 | 25487 | C. Thomas Tyler | Updated default SDP tarfile version. | ||
| #64 | 25433 | C. Thomas Tyler | Added '-d <sdp_dir>' flag. | ||
| #63 | 25391 | C. Thomas Tyler | Updated default SDP release for tarball installs. | ||
| #62 | 25382 | C. Thomas Tyler |
Updated default SDP release for tar installs to sdp.Unix.2019.1.25374.tgz. |
||
| #61 | 25370 | C. Thomas Tyler |
Added '-c <cfg>' and '-C' flags to use (and with '-C' generate) a config file (similar to the '-C' and '-c <cfg>' flags with p4broker). Updated docs accordingly. Added missing 'chmod +x' step in man page in docs. Enabled testing on Mac OSX to get past the package manager test, since yum/apt-get/zypper aren't expected to be on Mac OSX. |
||
| #60 | 25324 | C. Thomas Tyler | Changed default SDP version for taball installs. | ||
| #59 | 25313 | C. Thomas Tyler | Changed default SDP version for tar installs. | ||
| #58 | 25308 | C. Thomas Tyler | Added support for handling firewalld. | ||
| #57 | 25303 | C. Thomas Tyler | Adjusted to use 'ftp' user for The Workshop. | ||
| #56 | 25302 | C. Thomas Tyler |
Ensure perforce user owns his home directory when the account is created from scratch. |
||
| #55 | 25285 | C. Thomas Tyler | Corrected path to Perforce yum repo file. | ||
| #54 | 25282 | C. Thomas Tyler | Fixed order-of-operations issue for creating ~perforce/.bash* files. | ||
| #53 | 25281 | C. Thomas Tyler | Updated to latest SDP release. | ||
| #52 | 25277 | C. Thomas Tyler |
Removed download of Swarm tarball, to encourage use of package installer for Swarm. Added generation of sudoers file for perforce user. Added generation of Perforce Package Repository files for RHEL/CentOS and Ubuntu. |
||
| #51 | 25248 | C. Thomas Tyler | Filled in SDP 2019.1 changelist number, 25238. | ||
| #50 | 25247 | C. Thomas Tyler | Additional cleanup. | ||
| #49 | 25240 | C. Thomas Tyler |
Simplified to use a single /hxmetadata volume, as this is the most common configuration. Small sites don't need multiple volumes, and big sites have an array of hardware options, only some of which require a two-volume solution for metadata to maintain performance. Changed default replica ServerID from p4d_fr_bos to p4d_ha_bos, to promote modern 2018.2 high availability replicas that can be created with the mkrep.sh in SDP 2019.1+. The replica is not actually created with the Helix Installer, just referenced as a sample ServerID name. Extended '-B' flag to cleanup temp dir used by install_sdp_python.sh. Changed behavior to bail on failure to cleanup temp dirs, as this could result in wasted time building outdated versions of P4Python, etc. Added '-i <helix_installer_branch>' debugging flag to support testing of Helix Installer from the dev branch. Moved this and the '-D' flag to a new doc section titled DEBUGGING OPTIONS. Added '-X' eXtreme reset debugging option. Updated some internal variable names. |
||
| #48 | 25230 | C. Thomas Tyler | Added logic to install packages. | ||
| #47 | 25229 | C. Thomas Tyler | Added wget to zypper package list. | ||
| #46 | 25228 | C. Thomas Tyler |
Updated to generate ~perforce .bash_profile and .bashrc for fresh-from-scratch installs. Added warnings mechanism for non-fatal failures. |
||
| #45 | 25226 | C. Thomas Tyler |
Updated to use SDP 2019.1.XXXXX (to be udpated later with actual value for XXXXX). Updated to ensure needed OS packages are installed with various package managers (yum, apt-get, and zypper). Added support for SuSE Linux. Updated to create the 'perforce' OS user if needed, and also create its home directory if needed. Updated to pass shellcheck v0.60 verification. |
||
| #44 | 25127 | C. Thomas Tyler |
Updated platform for Mac OSX from darwin90x86_64 to macosx1010x86_64, as needed for r18.2+. |
||
| #43 | 25054 | C. Thomas Tyler |
Updated SDP default tarball to 2018.1.23583.p2. Corrected Swarm release to 2018.3; there is no 2018.4! |
||
| #42 | 25024 | C. Thomas Tyler |
Updated Helix Swarm to 2018.4. It's not yet used in this script other that grabbing the tarball. |
||
| #41 | 25009 | C. Thomas Tyler | Changed default tarball to 2018.1.p1. | ||
| #40 | 24912 | C. Thomas Tyler | Added support for sdp_reader login. | ||
| #39 | 24853 | C. Thomas Tyler | Updating to r18.2 for p4/p4d/p4broker/p4p and r18.3 for Swarm. | ||
| #38 | 23826 | C. Thomas Tyler |
Made more robust in resetting alternlate SDP structures with /p4/common being a local directory. Fixed typos in messages. |
||
| #37 | 23825 | C. Thomas Tyler | Updated to Helix Core 2018.1. | ||
| #36 | 23597 | C. Thomas Tyler | Updated default SDP to lastest patch. | ||
| #35 | 23512 | C. Thomas Tyler |
Updated default SDP version. Updated default P4D version to 2017.2. Updated default Swarm to 2017.4 (though Swarm isn't installed yet). |
||
| #34 | 23363 | C. Thomas Tyler |
reset_sdp.sh v2.9.11: Tweaked to simplify running a series of installs while re-using the Downloads dir, acquiring an updated SDP tarfile from the FTP server if needed. |
||
| #33 | 23359 | C. Thomas Tyler |
Fixed '-t default' processing. Updated to latest SDP tar file. |
||
| #32 | 23333 | C. Thomas Tyler | Updated default SDP version to latest just released. | ||
| #31 | 23280 | C. Thomas Tyler | reset_sdp.sh v2.9.7: Doc enhancements only, no functional change. | ||
| #30 | 23279 | C. Thomas Tyler | reset_sdp.sh v2.9.6: Doc enhancements only, no functional change. | ||
| #29 | 23243 | C. Thomas Tyler | Added support for fetching a shelved changelist. | ||
| #28 | 23062 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #27 | 23058 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #26 | 23011 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #25 | 22301 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #24 | 22294 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #23 | 22289 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #22 | 22205 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #21 | 22192 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #20 | 21827 | C. Thomas Tyler | Helix Installer, Routine merge down to dev from main. | ||
| #19 | 21541 | C. Thomas Tyler | Merge Down to dev from main. | ||
| #18 | 21538 | C. Thomas Tyler | Merge Down to dev from main. | ||
| #17 | 21506 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #16 | 21504 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #15 | 21502 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #14 | 21359 | C. Thomas Tyler | Merge down to dev from main. | ||
| #13 | 21356 | C. Thomas Tyler | Merge down to dev from main. | ||
| #12 | 21351 | C. Thomas Tyler | Merge Down to dev from main. | ||
| #11 | 21247 | C. Thomas Tyler | Merge Down to Dev from Main. | ||
| #10 | 21044 | C. Thomas Tyler | Merge Down to dev from main for helix-installer. | ||
| #9 | 20655 | C. Thomas Tyler | Routine Merge Down to dev from main for the Helix Installer. | ||
| #8 | 20651 | C. Thomas Tyler | Routine Merge Down to dev from main. | ||
| #7 | 20484 | C. Thomas Tyler | Routine Merge Down to dev from main. | ||
| #6 | 20053 | C. Thomas Tyler | Routine Merge Down to dev from main. | ||
| #5 | 19901 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #4 | 19894 | C. Thomas Tyler | Routine merge down to dev from main. | ||
| #3 | 19417 | C. Thomas Tyler | Merge down to dev from main for Helix Installer. | ||
| #2 | 19315 | C. Thomas Tyler | Routine Merge Down to dev from main for helix-installer. | ||
| #1 | 19232 | C. Thomas Tyler | Populate -b perforce_software-helix-installer-dev. | ||
| //guest/perforce_software/helix-installer/main/src/reset_sdp.sh | |||||
| #2 | 19231 | C. Thomas Tyler |
Adjusted Swarm URL to reflect the Helix Installer move from //guest/tom_tyler to //guest/perforce_software. |
||
| #1 | 19230 | C. Thomas Tyler |
Populate -o //guest/tom_tyler/helix-installer/... //guest/perforce_software/helix-installer/.... |
||
| //guest/tom_tyler/helix-installer/main/src/reset_sdp.sh | |||||
| #21 | 18963 | C. Thomas Tyler | Updated to latest SDP 2016.1.18958. | ||
| #20 | 16837 | C. Thomas Tyler | Updated to latest SDP tarfile. | ||
| #19 | 16697 | C. Thomas Tyler |
Tweaked to account for cases where 'hostname -i' call returns more than one IP address. |
||
| #18 | 16671 | C. Thomas Tyler |
reset_sdp.sh v2.6.9: * Minor optimization to error message when gcc and/or gcc-c++ packages are missing. * The '-fast' flag now changes the error relating to gcc/g++ not being installed to a warning. * Added confirmation message if gcc/g++ are found. |
||
| #17 | 16670 | C. Thomas Tyler |
reset_sdp.sh v2.6.8: * Now clones SDP main branch from The Workshop by default, rather than using a tar file. * Added '-b' to override default branch (main), e.g. '-b dev'. * Added '-t <tarfile>' (or '-t default') to use the old tarfile install method of using a hard-coded tarball, good for when stability is preferred over using the very latest. |
||
| #16 | 16660 | C. Thomas Tyler |
Added '-p' flag to enable preserving existing directories under /p4/common. |
||
| #15 | 16642 | C. Thomas Tyler | Updated default SDP version. | ||
| #14 | 16624 | C. Thomas Tyler |
reset_sdp.sh v2.6.5. For Linux hosts, optimized to use 'hostname -i' rather than 'hostname -I'. Added inline comments on IP selection on Linux and OSX. |
||
| #13 | 16623 | C. Thomas Tyler |
Changed order of commands to fix issue with permissions when generating SDP broker config file. |
||
| #12 | 16607 | C. Thomas Tyler | Audit enhancement. | ||
| #11 | 16606 | C. Thomas Tyler |
Improved handling of simulated mail from SDP scripts, so that live_checkpoint succeeds on all platforms; it had failed previosuly on Mac/Darwin due to failure sending email. Improved backup handling. |
||
| #10 | 16602 | C. Thomas Tyler |
Added '-local' option; avoids pulling from Workshop/FTP server. Updated Swarm to 2015.3. |
||
| #9 | 16567 | C. Thomas Tyler | Updated SDP Version. | ||
| #8 | 16396 | C. Thomas Tyler | Rolled back Swarm version. | ||
| #7 | 16395 | C. Thomas Tyler | Updated to 2015.2 GA for P4D and 2015.3 GA for Swarm. | ||
| #6 | 16393 | C. Thomas Tyler |
Fixed issue with 'sed' call. Updated to work with new HOSTIP setting in SDP. |
||
| #5 | 16377 | C. Thomas Tyler |
Updated to pick up latest SDP, and made corresponding adjustments to processing of subsitutions in mkdirs.sh. |
||
| #4 | 16359 | C. Thomas Tyler | Minor code cleanlup. | ||
| #3 | 16358 | C. Thomas Tyler |
Adjusted base path for Helix Installer. Updated coypright to reference LICENSE file. |
||
| #2 | 16349 | C. Thomas Tyler | Updated to latest SDP version. | ||
| #1 | 15829 | C. Thomas Tyler |
Moved Helix Installer to new Workshop Standard for personal projects. |
||
| //guest/tom_tyler/sw/main/hi/src/reset_sdp.sh | |||||
| #22 | 15629 | C. Thomas Tyler |
reset_sdp.sh v2.5.0: * Updated SDP to 2015.1.15607. * Added '-C' (clean) flag to blast /depotdata/p4/common. |
||
| #21 | 15611 | C. Thomas Tyler |
reset_sdp.sh v2.4.9: * Updated default Swarm to 2015.2. * Fixed mostly harmless bug attempting to pull a non-existing file from the web. |
||
| #20 | 15060 | C. Thomas Tyler | Rollback of Copy Up done with a new utility that apparently needs some work. | ||
| #19 | 15051 | C. Thomas Tyler | Copy Up using 'p4 copy -r -b tom_tyler-hi-dev' | ||
| #18 | 15007 | C. Thomas Tyler | Fixed expression. | ||
| #17 | 14987 | C. Thomas Tyler |
Reduced excessive noise from from rsync and tar commands. Added '--delete' to rsync commands handling the Sample Depot to force a clean reset. Added clear completion messages. |
||
| #16 | 14973 | C. Thomas Tyler | Added -no_ssl flag. | ||
| #15 | 14956 | C. Thomas Tyler | Fixed 'ps' check. | ||
| #14 | 14954 | C. Thomas Tyler | Fixed typo in case sensitivity mod. | ||
| #13 | 14953 | C. Thomas Tyler |
Updated various settings to match changes in SDP. Removed generation of a duplicate broker config file. |
||
| #12 | 14952 | C. Thomas Tyler |
Adjusted case sensitivitiy to be case-sensitive on Linux, the opposite of the SDP default. |
||
| #11 | 14949 | C. Thomas Tyler |
Enhanced to ensure that 'reset_sdp.sh' is the only script required. It now downloads all other scripts and data files as needed. |
||
| #10 | 14910 | C. Thomas Tyler |
Added initialtion of empty /depotdata /metadata and /logs dirs. |
||
| #9 | 14903 | C. Thomas Tyler | Fixed issue running under Vagrant. | ||
| #8 | 14902 | C. Thomas Tyler |
Changed default list of SDP instances to initialize from "1 12 abc" (illustrating ability to use named rather than number instances) to just "1", which is mostly all that's wanted for testing and pilot installations. |
||
| #7 | 14901 | C. Thomas Tyler | Fixed a typo in 'chmod' call. | ||
| #6 | 14188 | C. Thomas Tyler | Updated SDP version. | ||
| #5 | 14120 | C. Thomas Tyler |
Moved sample depot checkpoint load to configurator script. Added '-fast' flag to speed up testing. Various minor tweaks. |
||
| #4 | 14106 | C. Thomas Tyler |
Implemented Sample Depot SDP configurator script. Tightened logic around process kill statement, and made it work for Linux/Mac. |
||
| #3 | 14063 | C. Thomas Tyler |
Added generation of initial live checkpoint for each instance. Adjusted permissions on downloads folder. Removed bad code fragements. Cosmetic enhancement to the password. |
||
| #2 | 14033 | C. Thomas Tyler |
Added script to transform stock Sample Depot data set to be SDP compliant (mostly a stub at this point). Various improvements to reset_sdp.sh and the wrapper r.sh. |
||
| #1 | 13940 | C. Thomas Tyler |
Added my personal reset_sdp test script. DO NOT DEPLOY on a live server. |
||