sdp_sync.sh #10

#!/bin/bash
#==============================================================================
# Copyright and license info is available in the LICENSE file included with
# the Server Deployment Package (SDP), and also available online:
# https://swarm.workshop.perforce.com/projects/perforce-software-sdp/view/main/LICENSE
#------------------------------------------------------------------------------

#==============================================================================
# Declarations and Environment

# Environment isolation.  For stability and security reasons, prepend
# Allow override of P4U_HOME, which is set only when testing P4U scripts.
export P4U_HOME=${P4U_HOME:-/p4/common/bin}
export P4U_LIB=${P4U_LIB:-/p4/common/lib}
export P4U_ENV=$P4U_LIB/p4u_env.sh
export P4U_LOG=Unset

# PATH to include dirs where known-good scripts exist.
# known/tested PATH and, by implication, executables on the PATH.
export PATH=$P4CBIN:$PATH:~/bin:.
export P4CONFIG=${P4CONFIG:-.p4config}

[[ -r "$P4U_ENV" ]] || {
   echo -e "\nError: Cannot load environment from: $P4U_ENV\n\n"
   exit 1
}

declare BASH_LIBS=$P4U_ENV
BASH_LIBS+=" $P4U_LIB/libcore.sh"
BASH_LIBS+=" $P4U_LIB/libp4u.sh"
BASH_LIBS+=" $P4CBIN/backup_functions.sh"

for bash_lib in $BASH_LIBS; do
   source $bash_lib ||\
      { echo -e "\nFATAL: Missing lib [$bash_lib]. Aborting.\n"; exit 1; }
done

declare Version=2.1.4
declare HostList=
declare HostCfgFile=$P4CBIN/sdp_hosts.cfg
declare EnvFile=$P4U_HOME/p4_vars
declare SDPInstance=${SDP_INSTANCE:-Unset}
declare CronDir=/p4/common/etc/cron.d
declare CronFile=
declare StatusCmd=
declare TmpFile=
declare -i SilentMode=0
declare -i EmailAlways=0
declare -i EmailOnFailure=0
declare -i RemoveOldLogs=0
declare -i CheckCronFiles=0
declare -i DoStatusCheck=0
declare -i DoStatusMCheck=0
declare -i CronDefined
export VERBOSITY=3

#==============================================================================
# Local Functions

#------------------------------------------------------------------------------
# Function: terminate
function terminate
{
   # Disable signal trapping.
   trap - EXIT SIGINT SIGTERM

   declare -i sendEmail=0

   # Don't litter.
   cleanTrash

   vvmsg "$THISSCRIPT: EXITCODE: $OverallReturnStatus"

   # Stop logging.
   if [[ "${P4U_LOG}" != off ]]; then
      stoplog

      # Email.
      [[ $EmailAlways -eq 1 ]] && sendEmail=1
      [[ $EmailOnFailure -eq 1 && $OverallReturnStatus -ne 0 ]] && sendEmail=1

      if [[ $sendEmail -eq 1 ]]; then
         emailStatus="OK"
         [[ $OverallReturnStatus -ne 0 ]] && emailStatus="Error"

         local mail_sender_opt=$(get_mail_sender_opt)
         runCmd "$SDPMAIL -s \"${HOSTNAME%%\.*} p4_$SDPInstance sdp_sync [$emailStatus]\" \$mail_sender_opt \$MAILTO < $P4U_LOG"
      fi
   fi

   # With the trap removed, exit.
   exit $OverallReturnStatus
}

#------------------------------------------------------------------------------
# Function: usage (required function)
#
# Input:
# $1 - style, either -h (for short form) or -man (for man-page like format).
#------------------------------------------------------------------------------
function usage
{
   declare style=${1:--h}

   echo "USAGE for $THISSCRIPT v$Version:

$THISSCRIPT [-H <host1>[,<host2>,...]] [-i <instance>] [-s] [-m] [-c] [-r] [-e|-E] [-L <log>] [-si] [-v<n>] [-n|-N] [-D]

or

$THISSCRIPT [-h|-man|-V]
"
   if [[ $style == -man ]]; then
      echo -e "
DESCRIPTION:
	This script keeps Perforce Server Deployment Package (SDP) scripts in
	sync on all SDP hosts, as defined by the SDP_SYNC_HOSTS setting in the
	$HostCfgFile file.

	Also, if used with the '-c' flag, verifies that versioned cron files
	match those on each system.

	This script is intended to be called by a cron job the master server.
	It then does ssh calls to the remaining SDP hosts.

	Each target host is expect to have a P4CONFIG file named
	/p4/.p4config.SDP that defines Perforce environment settings that
	point to Perforce workspaces that enable versioning of the SDP on that
	host.  For pure read-only replicas, the P4PORT value in that P4CONFIG
	file must point to the master server.  Forwarding replicas and Edge
	Servers can point P4PORT to the master server or locally.

	The worskpaces must be configured for each host.  Typically they
	reference paths in the Perforce server that are common across
	all SDP servers, e.g. to populate the /p4/common/bin folder.
	Other paths are host-specific, like the /p4/<n>/bin folders
	that indicate which instances are active on the machine as well
	as which type of servers are active for each instance (p4d,
	p4p, p4broker, etc.).

	This depends on ssh keys being setup such that the Perforce login
	(as defined by OSUSER in $EnvFile) can ssh without a password
	to all SDP  hosts.  (To simplify failover, the backup servers should
	also be able to ssh to each other without a password; security
	implications should be considered here.)

OPTIONS:
 -H <host1>[,<host2>,...]
	Specify a comma-delimited list of hosts to push to.  By default,
	the SDP_SYNC_HOSTS value defined in the config file $HostCfgFile
	determines the list of hosts to push to.

 -i <n>
	Specify the SDP instance tag (e.g 1 for /p4/1, abc for /p4/abc) for
	the SDP instance that contains the SDP. The default is to use
	the \$SDP_INSTANCE variable if defined, or else '1'.

 -s	Specify that a 'p4 status' check should be done in directories
	specified by the SDP_STATUS_DIRS variable defined in $HostCfgFile.

 -m	Use with '-s' to specify that the '-m' flag to 'p4 status' should
	be used for a faster check (without MD5 digest comparison).  If
	'-m' is specified without '-s', the '-s' is implied.

 -c	Specifies that the crontab for the OSUSER ($OSUSER) on each machine
	should be compared against the the versioned cron file in:

	$CronDir

	In that directory, the cron files are named crontab.<user>.<hostname>

	The cron check is done for all hosts defined in the ALL_SDP_HOSTS
	setting in $HostCfgFile.

 -r
	Specify this option to remove old sdp_sync.*.log files.  If this option
	is specified, log files named /p4/<n>/logs/sdp_sync.*.log (where '<n>'
	is the SDP instance name) that are older than the number of journal
	rotations indicated by the KEEPLOGS setting in $EnvFile are removed.

	The old log removal occurs only upon successful completion.

 -e	Send email to MAILTO value defined in $EnvFile in event
	of failure only.

 -E	Send email to MAILTO value defined in $EnvFile.

 -v<n>	Set verbosity 1-5 (-v1 = quiet, -v5 = highest).

 -L <log>
	Specify the path to a log file, or the special value 'off' to disable
	logging.  By default, all output (stdout and stderr) goes to a log
	file named sdp_sync.<datestame>.log in $LOGS.

	NOTE: This script is self-logging.  That is, output displayed on the screen
	is simultaneously captured in the log file.  Do not run this script with
	redirection operators like '> log' or '2>&1', and do not use 'tee.'

-si	Operate silently.  All output (stdout and stderr) is redirected to the log
	only; no output appears on the terminal.  This cannot be used with
	'-L off'.
      
 -n	No-Op.  Prints commands instead of running them.

 -N	No-Op.  Similar to '-n', but this command does execute the 'ssh' calls to
	get to the remote host, but then does 'p4 sync -n' rather than' 'p4 sync'
	on the remote host.

 -D     Set extreme debugging verbosity.

HELP OPTIONS:
 -h	Display short help message
 -man	Display man-style help message
 -V	Dispay version info for this script and its libraries.

FILES:
	The SDP environment file $EnvFile defines various
	SDP settings, and is used by several SDP scripts.

	The host config file $HostCfgFile defines the SDP_SYNC_HOSTS and
	other values.

EXAMPLES:
	Recommended crontab usage for SDP Instance 1:
	$P4CBIN/$THISSCRIPT -i 1 -si -s -c -r -e < /dev/null > /dev/null 2>&1

	The redirect to /dev/null is to avoid any output that
	would generate a duplicate email from cron.  Output is not lost;
	it is written to a timestampped log file:
	$P4HOME/logs/sdp_sync.<timestamp>.log

SEE ALSO:
	See this related script:
	$P4CBIN/global_replica_status.sh
"
   fi

   exit 1
}

#==============================================================================
# Command Line Processing

declare -i shiftArgs=0

set +u
while [[ $# -gt 0 ]]; do
   case $1 in
      (-i) SDPInstance=$2; shiftArgs=1;;
      (-H) HostList=$2; shiftArgs=1;;
      (-r) RemoveOldLogs=1;;
      (-e) EmailOnFailure=1;;
      (-E) EmailAlways=1;;
      (-c) CheckCronFiles=1;;
      (-s) DoStatusCheck=1;;
      (-m) DoStatusCheck=1; DoStatusMCheck=1;;
      (-h) usage -h;;
      (-man) usage -man;;
      (-V) show_versions; exit 1;;
      (-v1) export VERBOSITY=1;;
      (-v2) export VERBOSITY=2;;
      (-v3) export VERBOSITY=3;;
      (-v4) export VERBOSITY=4;;
      (-v5) export VERBOSITY=5;;
      (-L) export P4U_LOG=$2; shiftArgs=1;;
      (-si) SilentMode=1;;
      (-n) export NO_OP=1;;
      (-N) export NO_OP=2;;
      (-D) set -x;; # Debug; use 'set -x' mode.
      (*) usageError "Unknown arg ($1).";;
   esac

   # Shift (modify $#) the appropriate number of times.
   shift; while [[ $shiftArgs -gt 0 ]]; do
      [[ $# -eq 0 ]] && usageError "Bad usage."
      shiftArgs=$shiftArgs-1
      shift
   done
done
set -u

#==============================================================================
# Command Line Verification

[[ $SilentMode -eq 1 && $P4U_LOG == off ]] && \
   usageError "Cannot use '-si' with '-L off'."

[[ $EmailOnFailure -eq 1 && $P4U_LOG == off ]] && \
   usageError "Cannot use '-e' or '-E' with '-L off'."

[[ $EmailAlways -eq 1 && $EmailOnFailure -eq 1 ]] && \
   usageError "The '-e' and '-E' flags are mutually exclusive."

[[ $SDPInstance == Unset ]] && \
   bail "SDP Environment is not set, and no instance parameter was provided. Aborting."

msg "Loading Environment for SDP Instance $SDPInstance."
source $EnvFile $SDPInstance ||\
   bail "Failed to load environment from $EnvFile. Aborting."

[[ $P4U_LOG == Unset ]] && export P4U_LOG="$LOGS/sdp_sync.$(date +'%Y%m%d-%H%M%S').log"

#==============================================================================
# Main Program

trap terminate EXIT SIGINT SIGTERM

declare -i OverallReturnStatus=0

if [[ "${P4U_LOG}" != off ]]; then
   touch ${P4U_LOG} || bail "Couldn't touch log file [${P4U_LOG}]."

   # Redirect stdout and stderr to a log file.
   if [[ $SilentMode -eq 0 ]]; then
      exec > >(tee ${P4U_LOG})
      exec 2>&1
   else
      exec >${P4U_LOG}
      exec 2>&1
   fi

   initlog
fi

msg "Loading hosts data from $HostCfgFile."
source $HostCfgFile ||\
   bail "Failed to load host configuration from $HostCfgFile. Aborting."

export ALL_SDP_HOSTS=${ALL_SDP_HOSTS:-Unset}
export SDP_REPLICA_HOSTS=${SDP_REPLICA_HOSTS:-Unset}
export SDP_REMOTE_HOSTS=${SDP_REMOTE_HOSTS:-Unset}
export SDP_SYNC_HOSTS=${SDP_SYNC_HOSTS:-Unset}
export SDP_STATUS_DIRS=${SDP_STATUS_DIRS:-Unset}

# If '-H <host1>[,<host2>,...]' was specified as a comma-separated list
# on the command line, overide the SDP_SYNC_HOSTS value defined in
# the host config file.
[[ -n "$HostList" ]] && export SDP_SYNC_HOSTS="$(echo $HostList|tr ',' ' ')"


[[ "$SDP_SYNC_HOSTS" == Unset ]] && \
   bail "The SDP_SYNC_HOSTS variable is not defined in $HostCfgFile.  Aborting."

[[ "$ALL_SDP_HOSTS" == Unset && $CheckCronFiles -eq 1 ]] && \
   bail "The ALL_SDP_HOSTS variable is not defined in $HostCfgFile, and '-c' is specified which requires it to be defined. Aborting."

[[ "$SDP_STATUS_DIRS" == Unset && $DoStatusCheck -eq 1 ]] && \
   bail "The SDP_STATUS_DIRS variable is not defined in $HostCfgFile, and '-s' or '-m' is specified which requires it to be defined. Aborting."

# Just in case commas were used instead of spaces in the config file, translate them
# to spaces here.
TmpFile=/tmp/crontab.tmp.$$.$RANDOM
GARBAGE+=" $TmpFile"

for host in $(echo $SDP_SYNC_HOSTS|tr ',' ' '); do
   runRemoteCmd $host "export P4CONFIG=/p4/.p4config.SDP\nexport P4ENVIRO=/tmp/tmp.p4enviro.$$.RANDOM\n$P4BIN set\necho\n$P4BIN -s info -s\necho\n$P4BIN -s opened\n" "Checking for opened files in the SDP workspace on $host."
   if [[ $RCMDOUTPUT == *"File(s) not opened on this client."* ]]; then
      msg "Verified: No files are checked out in the SDP workspace on host $host."
   else
      warnmsg "Files are checked out in the SDP workspace on host $host."
      OverallReturnStatus=1
   fi

   if [[ $NO_OP -eq 0 || $NO_OP -eq 1 ]]; then
      runRemoteCmd $host "export P4CONFIG=/p4/.p4config.SDP\nexport P4ENVIRO=/tmp/tmp.p4enviro.$$.RANDOM\n$P4BIN set\necho\n$P4BIN -s info -s\necho\n$P4BIN -s sync\n" "Syncing SDP workspace on $host." || OverallReturnStatus=1
   else
      runRemoteCmd $host "export P4CONFIG=/p4/.p4config.SDP\nexport P4ENVIRO=/tmp/tmp.p4enviro.$$.$RANDOM\n$P4BIN set\necho\n$P4BIN -s info -s\necho\n$P4BIN -s sync -n\n" "Checking to see if files need to be sync'd on host $host." 0 1 || OverallReturnStatus=1
   fi

   if [[ $DoStatusCheck -eq 1 ]]; then
      if [[ $DoStatusMCheck -eq 1 ]]; then
         msg "${H}\nDoing 'p4 status -m' check in \$SDP_STATUS_DIRS: $SDP_STATUS_DIRS\n"
      else
         msg "${H}\nDoing 'p4 status' check in \$SDP_STATUS_DIRS: $SDP_STATUS_DIRS\n"
      fi

      for dir in $(echo $SDP_STATUS_DIRS|tr ',' ' '); do
         StatusCmd="$P4BIN -s -d $dir status"
         [[ $DoStatusMCheck -eq 1 ]] && StatusCmd+=" -m"
         runRemoteCmd $host "export P4CONFIG=/p4/.p4config.SDP\nexport P4ENVIRO=/tmp/tmp.p4enviro.$$.RANDOM\n$P4BIN set\necho\n$StatusCmd" "Checking on $host with: $StatusCmd."
         if [[ $RCMDOUTPUT == *"No file(s) to reconcile"* ]]; then
            msg "Status reports clean for $host:$dir."
         else
            warnmsg "Status is not clean in $host:$dir."
            OverallReturnStatus=1
         fi
      done
   fi
done

if [[ $CheckCronFiles -eq 1 ]]; then
   msg "${H}\nChecking crontab files in \$ALL_SDP_HOSTS: $ALL_SDP_HOSTS\n"
   for host in $(echo $ALL_SDP_HOSTS|tr ',' ' '); do
      CronFile=$CronDir/crontab.$OSUSER.$host
      msg "Checking crontab for user $OSUSER on host $host."
      ssh $host crontab -l > $TmpFile

      if [[ "$(cat $TmpFile)" == *"no crontab for "* ]]; then
         CronDefined=0
      else
         CronDefined=1
      fi

      if [[ $CronDefined -eq 1 ]]; then
         if [[ -e "$CronFile" ]]; then
            diff $CronFile $TmpFile > /dev/null 2>&1
            if [[ $? -eq 0 ]]; then
               msg "Verified: Cron for user $OSUSER on host $host matches cron file [$CronFile]."
            else
               OverallReturnStatus=1
               errmsg "Cron for user $OSUSER on host $host does NOT match cron file [$CronFile].\nDiffs:\n$(diff $CronFile $TmpFile)\n"
            fi
         else
            warnmsg "An active cron exists for $OSUSER on host $host, but the cron file is missing: $CronFile."
            OverallReturnStatus=1
         fi
      else # Cron not defined.
         if [[ -e "$CronFile" ]]; then
            warnmsg "No active cron exists for $OSUSER on host $host, but cron file exists: $CronFile."
            OverallReturnStatus=1
         else
            msg "No active cron exists for $OSUSER on host $host, and so no cron file exists."
         fi
      fi
   done
fi

if [[ $OverallReturnStatus -eq 0 ]]; then
   msg "${H}\nAll processing completed successfully.\n"

   if [[ $RemoveOldLogs -eq 1 ]]; then
      if [[ $NO_OP -eq 0 ]]; then
         msg "Cleanup: Removing $P4HOME/logs/sdp_sync.*.log files older than $KEEPLOGS days old (if any):"
         /bin/find $P4HOME/logs/ -name "sdp_sync.*.log" -mtime +$KEEPLOGS -print -exec /bin/rm -f {} \;
      else
         msg "NO_OP: Would remove $P4HOME/logs/sdp_sync.*.log files older than $KEEPLOGS days old (if any):"
         /bin/find $P4HOME/logs/ -name "sdp_sync.*.log" -mtime +$KEEPLOGS -print
      fi
   fi
else
   msg "${H}\nProcessing completed, but with warnings or errors.  Scan above output carefully.\n" 
fi

# Illustrate using $SECONDS to display runtime of a script.
msg "That took about $(($SECONDS/3600)) hours $(($SECONDS%3600/60)) minutes $(($SECONDS%60)) seconds.\n"

# See the terminate() function, which is really where this script exits.
exit $OverallReturnStatus