#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) Perforce Software, Inc., 2007-2014. All rights reserved
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1 Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL PERFORCE
# SOFTWARE, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
# DAMAGE.
#------------------------------------------------------------------------------
. /p4/common/bin/backup_functions.sh
/p4/common/bin/p4login > /dev/null 2>&1
P4="$P4BIN -p ${P4PORT} -u $P4USER"
LOGFILE=$LOGS/replica_status.log
$P4 pull -lj > $LOGFILE 2>&1
mail_log_file "$HOSTNAME $P4SERVER Daily Replica Status." | # | Change | User | Description | Committed | |
|---|---|---|---|---|---|
| #11 | 27818 | C. Thomas Tyler |
Fixed capture of error output if replica is offline. #review-27819 |
||
| #10 | 25797 | C. Thomas Tyler |
Beefed up monitoring a bit, adding 'p4 pull -ls' and 'p4 pull -ls' output if lbr.replication == readonly. Added log rotation. Added exit code. Made shellcheck compliant. |
||
| #9 | 20749 | C. Thomas Tyler |
Approved and committed, but I believe that the shared data setting is always set to false on the master and we should look at fixing that in another change. Enhanced p4login again. Improvements: Default behavior with no arguments gives the desired results. For example, if run on a master, we login on the super user P4USER to P4PORT. If run on a replica/edge and auth.id is set, we login P4USER to the P4TARGET port of the replica. All other login functionality, such as logging in the replication service user on a replica, logging in supplemental automation users, is now accessed via new flags. A usage message is now available via '-h' and '-man' options. The new synopsys is: p4login [<instance>] [-p <port> | -service] [-automation] [-all] The <instance> parameter is the only non-flag positional parameter, and can be ommitted if SDP_INSTANCE is already defined (as is typical when called by scripts). With this change, several other scripts calling either the 'p4login' script or 'p4 login' commands were normalized to call p4login as appropriate given the new usage. Reviewer Note: Review p4login first, then other files. Most changes are in p4login. In other scripts callling p4login, calls similar to: $P4BIN -u $P4USER -p $P4PORT login < /path/to/pwd are replaced with: $P4CBIN/p4login In other scritps calling p4login, calls similar to: $P4BIN -p $P4MASTERPORT login < /path/to/pwd are replaced with: $P4CBIN/p4login -p $P4MASTERPORT Note that, if auth.id is set, calling 'p4login' actually has the same behavior as 'p4login -p $P4MASTERPORT', since p4login called on a replica with auth.id set will just login to the master port anyway. Depending on intent, sometimes $P4BIN/p4login -service is used. == Misc Cleanup == In doing the cleanup: * Fixed a hard-coding-to-instance-1 bug in broker_rotate.sh. * Fixed an inconsistency in recreate_db_sync_replica.sh, where it did just a regular login rather than a login -a as done in other places for (for compatibility with some multi-interface NIC card configs). == p4login Call Normalization == Code cleanup was done to normalize calls to p4login, such that: 1) the call starts with $P4CBIN/p4login (not the hard-coded path), and 2) logic to redirect sdtout/stderr to /dev/null was removed, since it's not necessary with p4login. (And if p4login ever does generate any unwanted output, we only fix it in one place). == Tweak to instance_vars.template == This change includes a tweak to set P4MASTERPORT dynamically on a replica to ensure the value precisely matches P4TARGET for the given replica. This will reduce a source of problems when SSL is used, as it is particularly sensitive to the precise P4PORT values used, and will also help for environments which have not yet set auth.id. If the port cannot be determined dynamically, we fall back to the old logic using the assigned value. == Tweak to SDP_ALWAYS_LOGIN behavior == This used to default to 1, now it defaults to 0. At this point we should no longer need to force logins, and in fact doing so can get into a 'p4 login' hang situation with auth.id set. Best to avoid unnecessary logins if we already have a valid ticket. (I think the need to force a login may have gone away with p4d patches). == Obsolete Script == With this change, svclogin.sh is now obsolete. All it was doing was a few redundant 'p4 login' commands followed by a call to p4login anyway. == Testing == Our test suite doesn't fully cover this change, so additional manual testing was done in the Battle School lab environment. |
||
| #8 | 19197 | Russell C. Jackson (Rusty) | Added additional replica status checks | ||
| #7 | 18978 | Russell C. Jackson (Rusty) |
Tested and correted logic. Submitting since it is working now. |
||
| #6 | 16029 | C. Thomas Tyler |
Routine merge to dev from main using: p4 merge -b perforce_software-sdp-dev |
||
| #5 | 15778 | C. Thomas Tyler | Routine Merge Down to dev from main. | ||
| #4 | 13906 | C. Thomas Tyler |
Normalized P4INSTANCE to SDP_INSTANCE to get Unix/Windows implementations in sync. Reasons: 1. Things that interact with SDP in both Unix and Windows environments shoudn't have to account for this obscure SDP difference between Unix and Windows. (I came across this doing CBD work). 2. The Windows and Unix scripts have different variable names for defining the same concept, the SDP instance. Unix uses P4INSTANCE, while Windows uses SDP_INSTANCE. 3. This instance tag, a data set identifier, is an SDP concept. I prefer the SDP_INSTANCE name over P4INSTANCE, so I prpose to normalize to SDP_INSTANCE. 4. The P4INSTANCE name makes it look like a setting that might be recognized by the p4d itself, which it is not. (There are other such things such as P4SERVER that could perhaps be renamed as a separate task; but I'm not sure we want to totally disallow the P4 prefix for variable names. It looks too right to be wrong in same cases, like P4BIN and P4DBIN. That's a discussion for another day, outside the scope of this task). Meanwhile: * Fixed a bug in the Windows 2013.3 upgrade script that was referencing undefined P4INSTANCE, as the Windows environment defined only SDP_INSTANCE. * Had P4INSTANCE been removed completely, this change would likely cause trouble for users doing updates for existing SDP installations. So, though it involves slight technical debt, I opted to keep a redundant definition of P4INSTANCE in p4_vars.template, with comments indicating SDP_INSTANCE should be used in favor of P4INSTANCE, with a warning that P4INSTANCE may go away in a future release. This should avoid unnecessary upgrade pain. * In mkdirs.sh, the varialbe name was INSTANCE rather than SDP_INSTANCE. I changed that as well. That required manual change rather than sub/replace to avoid corrupting other similar varialbe names (e.g. MASTERINSTANCE). This is a trivial change technically (a substitute/replace, plus tweaks in p4_vars.template), but impacts many files. |
||
| #3 | 12169 | Russell C. Jackson (Rusty) |
Updated copyright date to 2015 Updated shell scripts to require an instance parameter to eliminate the need for calling p4master_run. Python and Perl still need it since you have to set the environment for them to run in. Incorporated comments from reviewers. Left the . instead of source as that seems more common in the field and has the same functionality. |
||
| #2 | 12028 | C. Thomas Tyler | Refreshed SDP dev branch, merging down from main. | ||
| #1 | 10638 | C. Thomas Tyler | Populate perforce_software-sdp-dev. | ||
| //guest/perforce_software/sdp/main/Server/Unix/p4/common/bin/replica_status.sh | |||||
| #1 | 10148 | C. Thomas Tyler | Promoted the Perforce Server Deployment Package to The Workshop. | ||