mkdirs.sh #67

  • //
  • guest/
  • perforce_software/
  • sdp/
  • main/
  • Server/
  • Unix/
  • setup/
  • mkdirs.sh
  • View
  • Commits
  • Open Download .zip Download (18 KB)
#!/bin/bash
#==============================================================================
# Copyright and license info is available in the LICENSE file included with
# the Server Deployment Package (SDP), and also available online:
# https://swarm.workshop.perforce.com/projects/perforce-software-sdp/view/main/LICENSE
#------------------------------------------------------------------------------
#
# Change the first three variables below to match the volume names on the machine
# you are configuring the SDP on. 
# Set the remaining variables appropriately. The meaning of each should be obvious.
# Change the first three variables below to match the volume names on the machine
# you are configuring the SDP on.
# Set the remaining variables appropriately. The meaning of each should be obvious.
# Before running this script, create a configuration file.  You can use a
# single configuration file named mkdirs.cfg in the same directory as this
# mkdirs.sh script. Alternately, you can create a file named mkdirs.N.cfg,
# where 'N' is the name of the instance you intend to configure.
#
# Run this script as root, and pass in the instance number you are configuring.
#
# If you do not have root access, then some commands will be skipped, and you
# will need to have the defined $P4DIR directory already existing (created by
# the root user and the ownership changed to the OS user that you are planning
# to run Perforce under). The /hxmetadata*, /hxdepots and /hxlogs volumes will
# also need to be owned by the OS user as well in order for the script to work.
# You can then run this script as the OS user for Perforce and everything
# should work fine.
#
# This script creates an init script in the $P4DIR/$SDP_INSTANCE/bin directory.
# You can use it from there if you are configuring a cluster, or you can link
# it in /etc/init.d if you are setting up a stand alone machine.  Sample
# systemd service files are included in the systemd folder.
#
# After running this script, set up the crontab based on templates
# generated in $P4DIR/common/etc/cron.d.  For convenience, a sample generated
# is to $P4DIR/p4.crontab.
#
# Next, put the license file in place in the P4ROOT dir, and launch the server with the init
# script.
#
# Then run $P4DIR/common/bin/p4master_run <instance> $P4DIR/common/bin/live_checkpoint.sh
# and then run both the daily_checkpoint.sh and recreate_db_checkpoint.sh to
# make sure everything is working before setting up the crontab.
#
# Also run $P4DIR/common/bin/p4master_run <instance> $P4DIR/common/bin/p4review.py <instance>
# to make sure the review script is working properly.  If you intend to use
# Swarm, you can skip configuration of the review daemon, and instead configure
# Swarm to handle review-style email notifications.
#
# UPGRADING SDP
# Specify the -test parameter to the script.
# In this case the script will NOT make the various directories under $P4DIR,
# but will instead create /tmp/p4 directory structure with the various files
# processed via templates etc. You can then manually compare this directory
# structure with your existing $P4DIR structure and manually copy the various
# files into it. For a more sophisticated approch using, see the
# 'hms_ts_setup.sh' script in the hms subdirectory.

set -u

function msg () { echo -e "$*"; }
function errmsg () { msg "\nError: $*" >&2; }
function warnmsg () { msg "\nWarning: $*"; }
function bail() { errmsg "${1:-Unknown Error}\n" >&2; exit ${2:-1}; }
function usage () {
   msg "Usage:\n\t${0##*/} <instance> [-test]\n"
   exit 1
}

declare -i DoChownCommands=1

if [ $# -lt 1 ] || [ $# -gt 2 ]; then
   usage
fi

# Verify instance value.
SDP_INSTANCE=$1
if [[ "$SDP_INSTANCE" == "-test" ]]; then
    bail "An instance argument is required."
fi

# Note that if the following is set to 1 then a trial run is done, into /tmp/p4
TEST=0
if [[ $# -gt 1 && "$2" == "-test" ]]; then
   TEST=1
fi

# Check for config file - same dir as this script
if [[ -r "${0%/*}/mkdirs.${SDP_INSTANCE}.cfg" ]]; then
   mkdirs_config="${0%/*}/mkdirs.${SDP_INSTANCE}.cfg"
elif [[ -r "${0%/*}/mkdirs.cfg" ]]; then
   mkdirs_config="${0%/*}/mkdirs.cfg"
else
   bail "Missing mkdirs config file $mkdirs_config."
fi

source $mkdirs_config || bail "Failed to source $mkdirs_config."

if [[ -r $SDP/Version ]]; then
   SDP_VERSION="$(cat $SDP/Version)"
else
   SDP_VERSION="Rev. SDP/Unix/UNKNOWN"
fi

P4DIR=/p4
P4SERVER=p4_$SDP_INSTANCE

export AWK=awk
export ID=id
export MAIL=mail

OS=`uname`
if [[ "${OS}" = "SunOS" ]] ; then
  export AWK=/usr/xpg4/bin/awk
  export ID=/usr/xpg4/bin/id
  export MAIL=mailx
elif [[ "${OS}" = "AIX" ]] ; then
  export AWK=awk
  export ID=id
  export MAIL=mail
fi

if [[ `$ID -u` -eq 0 ]]; then
   msg "Verified: Running as root."
elif [[ `whoami` == $OSUSER ]]; then
   warnmsg "Not running as root; chown commands will be skipped and basic directories must exist.\n"
   DoChownCommands=0
else
   bail "$0 must be run as as root or $OSUSER.\n"
fi

if [[ $TEST -eq 1 ]]; then
  DD=tmp
  MD=tmp
  LG=tmp
  CN=tmp
  P4DIR=/tmp/p4
  msg "\n*********  -test specified - will install to $P4DIR  *********\n"
fi

SDP_COMMON=$SDP/Server/Unix/p4/common

declare -i PreflightOK=1

[[ -f $SDP_COMMON/bin/p4 ]] || { errmsg "No p4 in $SDP_COMMON/bin"; PreflightOK=0; }
[[ -f $SDP_COMMON/bin/p4d ]] || { errmsg "No p4d in $SDP_COMMON/bin"; PreflightOK=0; }
[[ -f $SDP_COMMON/bin/p4p ]] || warnmsg "No p4p in $SDP_COMMON/bin"
[[ -f $SDP_COMMON/bin/p4broker ]] || warnmsg "No p4broker in $SDP_COMMON/bin"

if [[ $TEST -eq 1 && ! -d "$P4DIR" ]]; then
   mkdir "$P4DIR" || bail "Failed to create $P4DIR."
fi

# If we aren't running as root, extend the preflight checks to verify basic dirs
# exist.
if [[ `$ID -u` -ne 0 && $TEST -eq 0 ]]; then
   for d in "$P4DIR" "/$DD" "/$DB1" "/$DB2" "/$LG"; do
      if [[ -d "$d" ]]; then
         dirOwner=$(ls -ld "$d" | $AWK '{print $3}')
         dirGroup=$(ls -ld "$d" | $AWK '{print $4}')
         if [[ "$dirOwner" != "$OSUSER" ]]; then
            errmsg "Dir [$d] exists but with wrong owner, $dirOwner instead of $OSUSER."
            PreflightOK=0
         fi
         if [[ "$dirGroup" != "$OSGROUP" ]]; then
            warnmsg "Dir [$d] exists but with wrong group, $dirGroup instead of $OSGROUP."
         fi
      else
         errmsg "Dir must exist if not running as root: $d"
         PreflightOK=0
      fi
   done
fi

if [[ $PreflightOK -eq 1 ]]; then
   msg "Verified: Preflight checks passed."
else
   bail "Aborting due to failed preflight checks."
fi

if [[ $TEST -eq 0 ]]; then
   chmod 755 $SDP_COMMON/bin/p4
   chmod 700 $SDP_COMMON/bin/p4d
fi

[[ -f $SDP_COMMON/bin/p4broker ]] && chmod 700 $SDP_COMMON/bin/p4broker
[[ -f $SDP_COMMON/bin/p4web ]] && chmod 700 $SDP_COMMON/bin/p4web
[[ -f $SDP_COMMON/bin/p4p ]] && chmod 700 $SDP_COMMON/bin/p4p

# Make sure you update the p4 and p4d to the latest versions in the
# sdp/Server/Unix/p4/common/bin directory when making new instances at a later date.

P4RELNUM=`$SDP_COMMON/bin/p4 -V | grep -i Rev. | $AWK -F / '{print $3}'`
P4BLDNUM=`$SDP_COMMON/bin/p4 -V | grep -i Rev. | $AWK -F / '{print $4}' | $AWK '{print $1}'`
P4DRELNUM=`$SDP_COMMON/bin/p4d -V | grep -i Rev. | $AWK -F / '{print $3}'`
P4DBLDNUM=`$SDP_COMMON/bin/p4d -V | grep -i Rev. | $AWK -F / '{print $4}' | $AWK '{print $1}'`

[[ -d $P4DIR ]] || mkdir $P4DIR

[[ -d /$DD/p4 ]] || mkdir /$DD/p4
[[ -d /$DB1/p4 ]] || mkdir /$DB1/p4
[[ -d /$DB2/p4 ]] || mkdir /$DB2/p4
[[ -d /$LG/p4 ]] || mkdir /$LG/p4

mkdir -p /$DD/p4/$SDP_INSTANCE/bin
mkdir -p /$LG/p4/$SDP_INSTANCE/tmp
mkdir -p /$DD/p4/$SDP_INSTANCE/depots
mkdir -p /$DD/p4/$SDP_INSTANCE/checkpoints

case "$SERVER_TYPE" in 
   (p4d_standby)
      mkdir -p /$LG/p4/$SDP_INSTANCE/journals.rep
      if [[ $DoChownCommands -eq 1 ]]; then
         chown $OSUSER:$OSGROUP /$LG/p4/$SDP_INSTANCE/journals.rep
      fi
   ;;
   (p4d_replica|p4d_edge)
      mkdir -p /$DD/p4/$SDP_INSTANCE/checkpoints.${REPLICA_ID#p4d_}
      if [[ $DoChownCommands -eq 1 ]]; then
         chown $OSUSER:$OSGROUP /$LD/p4/$SDP_INSTANCE/checkpoints.${REPLICA_ID#p4d_}
      fi
   ;;
esac

[[ -d $P4DIR/ssl ]] || mkdir -p $P4DIR/ssl
[[ -f $SDP/Server/Unix/p4/ssl/config.txt && ! -f $P4DIR/ssl/config.txt ]] &&\
   cp $SDP/Server/Unix/p4/ssl/config.txt $P4DIR/ssl/
[[ -d /$CN/p4/common/bin ]] || mkdir -p /$CN/p4/common/bin
[[ -d /$CN/p4/common/config ]] || mkdir -p /$CN/p4/common/config

mkdir -p /$DB1/p4/$SDP_INSTANCE/db1/save
mkdir -p /$DB2/p4/$SDP_INSTANCE/db2/save
mkdir -p /$LG/p4/$SDP_INSTANCE/logs

if [[ $TEST -eq 0 ]]; then
    cd /$DD/p4/$SDP_INSTANCE
else
    cd $P4DIR/$SDP_INSTANCE
fi

if [[ $TEST -eq 0 ]]; then
   [[ -L root ]] || ln -s /$DB1/p4/$SDP_INSTANCE/db1 root
   [[ -L offline_db ]] || ln -s /$DB2/p4/$SDP_INSTANCE/db2 offline_db
   if [[ ! -d logs ]]; then
      [[ -L logs ]] || ln -s /$LG/p4/$SDP_INSTANCE/logs
   fi

   case "$SERVER_TYPE" in 
      (p4d_standby)
         if [[ ! -d journals.rep ]]; then
            [[ -L journals.rep ]] || ln -s /$LG/p4/$SDP_INSTANCE/journals.rep
         fi
      ;;
   esac

   if [[ ! -d tmp ]]; then
      [[ -L tmp ]] || ln -s /$LG/p4/$SDP_INSTANCE/tmp
   fi
   cd $P4DIR
   [[ -L $SDP_INSTANCE ]] || ln -s /$DD/p4/$SDP_INSTANCE
   [[ -L sdp ]] || ln -s $SDP $P4DIR/sdp
   [[ -L common ]] || ln -s /$CN/p4/common
fi

case "$SERVER_TYPE" in
   (p4d_master|p4d_edge)
      SERVERID=$MASTER_ID
      echo $SERVERID > $P4DIR/$SDP_INSTANCE/root/server.id
   ;;
   (p4d_replica|p4d_standby)
      SERVERID=$REPLICA_ID
      echo $SERVERID > $P4DIR/$SDP_INSTANCE/root/server.id
   ;;
   (*)
      SERVERID=$SERVER_TYPE
   ;;
esac

[[ -f /$CN/p4/common/bin/p4_$P4RELNUM.$P4BLDNUM ]] || cp $SDP_COMMON/bin/p4 /$CN/p4/common/bin/p4_$P4RELNUM.$P4BLDNUM
[[ -f /$CN/p4/common/bin/p4d_$P4DRELNUM.$P4DBLDNUM ]] || cp $SDP_COMMON/bin/p4d /$CN/p4/common/bin/p4d_$P4DRELNUM.$P4DBLDNUM

if [[ ! -f /$CN/p4/common/bin/p4_vars ]]; then
   cp -R $SDP_COMMON/bin/* /$CN/p4/common/bin

   # Copy certain subdirs of /p4/common if don't already exist.
   for dir in etc hms lib; do
      if [[ ! -d /$CN/p4/common/$dir ]]; then
         cp -pr $SDP_COMMON/$dir /$CN/p4/common/.
      fi
   done

   cd /$CN/p4/common/bin
   ln -s p4_$P4RELNUM.$P4BLDNUM p4_${P4RELNUM}_bin
   ln -s p4d_$P4DRELNUM.$P4DBLDNUM p4d_${P4DRELNUM}_bin
   ln -s p4_${P4RELNUM}_bin p4_bin

   sed -e "s:REPL_SDPVERSION:${SDP_VERSION}:g" \
      -e "s/REPL_OSUSER/${OSUSER}/g" \
      $SDP_COMMON/config/p4_vars.template > p4_vars
fi

cd /$CN/p4/common/bin

ln -s p4d_${P4DRELNUM}_bin p4d_${SDP_INSTANCE}_bin

if [[ ! -e /$CN/p4/common/config/.p4passwd.${P4SERVER}.admin ]]; then
   echo $P4ADMINPASS > /$CN/p4/common/config/.p4passwd.${P4SERVER}.admin
else
   warnmsg "Skipping update of existing admin password file /$CN/p4/common/config/.p4passwd.${P4SERVER}.admin"
fi

if [[ ! -e /$CN/p4/common/config/.p4passwd.${P4SERVER}.service ]]; then
   echo $P4SERVICEPASS > /$CN/p4/common/config/.p4passwd.${P4SERVER}.service
else
   warnmsg "Skipping update of existing service password file /$CN/p4/common/config/.p4passwd.${P4SERVER}.service"
fi

# Create broker links if broker exists
if [[ -f $SDP_COMMON/bin/p4broker ]]; then
   P4BRELNUM=`$SDP_COMMON/bin/p4broker -V | grep -i Rev. | $AWK -F / '{print $3}'`
   P4BBLDNUM=`$SDP_COMMON/bin/p4broker -V | grep -i Rev. | $AWK -F / '{print $4}' | $AWK '{print $1}'`
   [[ -f /$CN/p4/common/bin/p4broker_$P4BRELNUM.$P4BBLDNUM ]] || cp $SDP_COMMON/bin/p4broker /$CN/p4/common/bin/p4broker_$P4BRELNUM.$P4BBLDNUM
   [[ -L p4broker_${P4BRELNUM}_bin ]] && unlink p4broker_${P4BRELNUM}_bin
   ln -s p4broker_$P4BRELNUM.$P4BBLDNUM p4broker_${P4BRELNUM}_bin
   [[ -L p4broker_${SDP_INSTANCE}_bin ]] && unlink p4broker_${SDP_INSTANCE}_bin
   ln -s p4broker_${P4BRELNUM}_bin p4broker_${SDP_INSTANCE}_bin
   cd $P4DIR/$SDP_INSTANCE/bin
   [[ -L p4broker_${SDP_INSTANCE} ]] || ln -s $P4DIR/common/bin/p4broker_${SDP_INSTANCE}_bin p4broker_${SDP_INSTANCE}
   sed "s/REPL_SDP_INSTANCE/${SDP_INSTANCE}/g" $SDP_COMMON/etc/init.d/p4broker_instance_init.template > p4broker_${SDP_INSTANCE}_init
   chmod +x p4broker_${SDP_INSTANCE}_init
fi

# Create p4p links if p4p exists
cd /$CN/p4/common/bin
if [[ -x $SDP_COMMON/bin/p4p ]]; then
   P4PRELNUM=`$SDP_COMMON/bin/p4p -V | grep -i Rev. | $AWK -F / '{print $3}'`
   P4PBLDNUM=`$SDP_COMMON/bin/p4p -V | grep -i Rev. | $AWK -F / '{print $4}' | $AWK '{print $1}'`
   [[ -f /$CN/p4/common/bin/p4p_$P4PRELNUM.$P4PBLDNUM ]] || cp $SDP_COMMON/bin/p4p /$CN/p4/common/bin/p4p_$P4PRELNUM.$P4PBLDNUM
   [[ -L p4p_${P4PRELNUM}_bin ]] && unlink p4p_${P4PRELNUM}_bin
   ln -s p4p_$P4PRELNUM.$P4PBLDNUM p4p_${P4PRELNUM}_bin
   [[ -L p4p_${SDP_INSTANCE}_bin ]] && unlink p4p_${SDP_INSTANCE}_bin
   ln -s p4p_${P4PRELNUM}_bin p4p_${SDP_INSTANCE}_bin
   cd $P4DIR/$SDP_INSTANCE/bin
   [[ -L p4p_${SDP_INSTANCE} ]] || ln -s $P4DIR/common/bin/p4p_${SDP_INSTANCE}_bin p4p_${SDP_INSTANCE}
   sed -e "s/REPL_SDP_INSTANCE/${SDP_INSTANCE}/g" \
      -e "s/REPL_DNSNAME/${P4DNSNAME}/g" \
      $SDP_COMMON/etc/init.d/p4p_instance_init.template > p4p_${SDP_INSTANCE}_init
   chmod +x p4p_${SDP_INSTANCE}_init
   mkdir -p /$DD/p4/$SDP_INSTANCE/cache
fi

cd $P4DIR/$SDP_INSTANCE/bin
ln -s $P4DIR/common/bin/p4_bin p4_$SDP_INSTANCE

sed "s/REPL_SDP_INSTANCE/${SDP_INSTANCE}/g" \
   $SDP_COMMON/etc/init.d/p4d_instance_init.template > p4d_${SDP_INSTANCE}_init
chmod +x p4d_${SDP_INSTANCE}_init

# Moved the less commonly used, but always created init scripts to an init directory.
mkdir init
cd init

sed "s/REPL_SDP_INSTANCE/${SDP_INSTANCE}/g" \
   $SDP_COMMON/etc/init.d/p4dtg_instance_init.template > p4dtg_${SDP_INSTANCE}_init
chmod +x p4dtg_${SDP_INSTANCE}_init

cd ..

if [[ $CASE_SENSITIVE -eq 1 ]]; then
   ln -s $P4DIR/common/bin/p4d_${SDP_INSTANCE}_bin p4d_$SDP_INSTANCE
else
   echo '#!/bin/bash' > p4d_$SDP_INSTANCE
   echo P4D=/p4/common/bin/p4d_${SDP_INSTANCE}_bin >> p4d_$SDP_INSTANCE
   echo 'exec $P4D -C1 "$@"' >> p4d_$SDP_INSTANCE
   chmod +x p4d_$SDP_INSTANCE
fi

cd $P4DIR/common/config

sed -e "s/REPL_MAILTO/${MAILTO}/g" \
   -e "s/REPL_MAILFROM/${MAILFROM}/g" \
   -e "s/REPL_ADMINUSER/${ADMINUSER}/g" \
   -e "s/REPL_MASTER_ID/${MASTER_ID}/g" \
   -e "s/REPL_SSLPREFIX/${SSL_PREFIX}/g" \
   -e "s/REPL_P4PORT/${P4_PORT}/g" \
   -e "s/REPL_P4BROKERPORT/${P4BROKER_PORT}/g" \
   -e "s/REPL_P4WEBPORT/${P4WEB_PORT}/g" \
   -e "s/REPL_P4FTPPORT/${P4FTP_PORT}/g" \
   -e "s/REPL_DNSNAME/${P4DNSNAME}/g" \
   -e "s/REPL_P4P_TARGET_PORT/${P4P_TARGET_PORT}/g" \
   $SDP_COMMON/config/instance_vars.template > p4_${SDP_INSTANCE}.vars

sed -e "s/REPL_ADMINISTRATOR/${MAILTO}/g" \
   -e "s/REPL_COMPLAINFROM/${COMPLAINFROM}/g" \
   -e "s/REPL_MAILHOST/${MAILHOST}/g" \
   -e "s/REPL_DNSNAME/${P4DNSNAME}/g" \
   $SDP_COMMON/config/p4review.cfg.template > p4_${SDP_INSTANCE}.p4review.cfg

cd $P4DIR
if [[ ! -f ${P4DIR}/p4.crontab ]]; then
   CRONTAB_NAME=p4.crontab
else
   CRONTAB_NAME=p4.crontab.new
   rm -f ${P4DIR}/$CRONTAB_NAME > /dev/null 2>&1
   msg "Existing crontab found, writing new crontab to ${P4DIR}/${CRONTAB_NAME}"
fi

sed -e "s/REPL_MAILTO/${MAILTO}/g" \
   -e "s/REPL_MAILFROM/${MAILFROM}/g" \
   -e "s/REPL_INSTANCE/${SDP_INSTANCE}/g" \
   $SDP_COMMON/etc/cron.d/template.crontab.combined > $CRONTAB_NAME

cd $P4DIR/${SDP_INSTANCE}/bin

if [[ "$SHAREDDATA" == "TRUE" ]]; then
   if [[ "$SERVER_TYPE" == p4d_replica || "$SERVER_TYPE" == p4d_standby ]]; then
      msg "Configuring Replica sharing depot data with master, skipping chown/chmod of depot files"
      DoChownCommands=0
   fi
fi

if [[ $DoChownCommands -eq 1 ]]; then
   if [[ $TEST -eq 0 ]]; then
      chown $OSUSER:$OSGROUP /$DD
      chown $OSUSER:$OSGROUP /$LG
      chown $OSUSER:$OSGROUP /$DB1
      chown $OSUSER:$OSGROUP /$DB2
   fi
   chown $OSUSER:$OSGROUP /$DD/p4
   chown $OSUSER:$OSGROUP /$LG/p4
   chown $OSUSER:$OSGROUP /$DB1/p4
   chown $OSUSER:$OSGROUP /$DB2/p4

   chown -h $OSUSER:$OSGROUP $P4DIR
   chown -h $OSUSER:$OSGROUP $P4DIR/$SDP_INSTANCE
   chown -h $OSUSER:$OSGROUP $P4DIR/common
   [[ $TEST -eq 0 ]] && chown -h $OSUSER:$OSGROUP $P4DIR/sdp
   chown $OSUSER:$OSGROUP $P4DIR/*

   chown -Rh $OSUSER:$OSGROUP $P4DIR/common
   [[ $TEST -eq 0 ]] && chown -Rh $OSUSER:$OSGROUP $P4DIR/sdp
   chown -Rh $OSUSER:$OSGROUP /$CN/p4/common
   chown -Rh $OSUSER:$OSGROUP /$DB1/p4/$SDP_INSTANCE
   chown -Rh $OSUSER:$OSGROUP /$DB2/p4/$SDP_INSTANCE
   chown -Rh $OSUSER:$OSGROUP /$LG/p4/$SDP_INSTANCE

   if [[ "$SHAREDDATA" == "FALSE" ]]; then
      msg "Setting ownership on depot files - this may take some time ..."
      chown -Rh $OSUSER:$OSGROUP /$DD/p4/$SDP_INSTANCE
   fi
else
   msg "Skipped chown/chmod commands for large directory trees."
fi

chmod 700 /$DB1/p4
chmod 700 /$DB2/p4
chmod 700 /$DD/p4
chmod 700 /$LG/p4

chmod -R 700 /$DB1/p4/$SDP_INSTANCE
chmod -R 700 /$DB2/p4/$SDP_INSTANCE
chmod -R 700 /$CN/p4/common
chmod -R 700 /$LG/p4/$SDP_INSTANCE

if [[ "$SHAREDDATA" == "FALSE" ]]; then
   msg "Setting permissions on depot files - this may take some time ..."
   chmod -R 700 /$DD/p4/$SDP_INSTANCE
fi

if [[ $SDP_INSTANCE != $MASTERINSTANCE ]]; then
   if [[ -f $P4DIR/$MASTERINSTANCE/root/license ]]; then
      ln -s $P4DIR/$MASTERINSTANCE/root/license $P4DIR/$SDP_INSTANCE/root/license
      chown -h $OSUSER:$OSGROUP $P4DIR/$SDP_INSTANCE/root/license
   fi
fi

chmod 755 $P4DIR/${SDP_INSTANCE}/bin/*_init
chmod 755 $P4DIR/${SDP_INSTANCE}/bin/init/*_init
chmod 600 /$CN/p4/common/config/.p4passwd.${P4SERVER}.admin
chmod 600 /$CN/p4/common/config/.p4passwd.${P4SERVER}.service
[[ -e /$CN/p4/common/bin/*.cfg ]] && chmod 600 /$CN/p4/common/bin/*.cfg
[[ -e /$CN/p4/common/bin/*.html ]] && chmod 600 /$CN/p4/common/bin/*.html
chmod 700 $P4DIR/ssl
[[ -e $P4DIR/ssl/* ]] && chmod 600 $P4DIR/ssl/*

if [[ $TEST -eq 1 ]]; then
   msg "
This was done in TEST mode - please run the following command to see any changes should be
applied to your live environment (manually):

diff -r /p4/$SDP_INSTANCE/bin $P4DIR/$SDP_INSTANCE/bin
diff -r /p4/common $P4DIR/common

If upgrading an older SDP version then be careful to ensure files in /p4/common/config are correct
and update that /p4/common/bin/p4_vars is appropriate.\n"
fi

exit 0
# Change User Description Committed
#97 31566 C. Thomas Tyler Released SDP 2024.2.31564 (2025/05/14).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#96 31369 C. Thomas Tyler Released SDP 2024.2.31367 (2025/03/23).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#95 31204 Will Kreitzmann Released SDP 2024.2.31193 (2025/01/17).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#94 31077 C. Thomas Tyler Released SDP 2024.2.31075 (2024/12/20).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#93 30915 C. Thomas Tyler Released SDP 2024.1.30913 (2024/11/20).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#92 30388 C. Thomas Tyler Released SDP 2024.1.30385 (2024/06/11).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#91 30043 C. Thomas Tyler Released SDP 2023.2.30041 (2023/12/22).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#90 29891 C. Thomas Tyler Released SDP 2023.1.29699 (2023/07/11).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#89 29701 C. Thomas Tyler Released SDP 2023.1.29699 (2023/07/11).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#88 29623 C. Thomas Tyler Released SDP 2023.1.29621 (2023/05/25).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#87 29401 C. Thomas Tyler Released SDP 2022.2.29399 (2023/02/06).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#86 29205 C. Thomas Tyler Released SDP 2022.1.29203 (2022/11/22).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#85 28412 C. Thomas Tyler Released SDP 2021.2.28410 (2021/11/24).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#84 28240 C. Thomas Tyler Released SDP 2021.1.28238 (2021/11/12).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#83 27901 C. Thomas Tyler Released SDP 2020.1.27899 (2021/07/13).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#82 27822 C. Thomas Tyler Released SDP 2020.1.27820 (2021/06/19).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#81 27761 C. Thomas Tyler Released SDP 2020.1.27759 (2021/05/07).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#80 27400 C. Thomas Tyler Released SDP 2020.1.27398 (2021/02/06).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#79 27331 C. Thomas Tyler Released SDP 2020.1.27325 (2021/01/29).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#78 26246 C. Thomas Tyler Released SDP 2019.3.26239 (2020/01/08).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#77 26161 C. Thomas Tyler Released SDP 2019.3.26159 (2019/11/06).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#76 25933 C. Thomas Tyler Released SDP 2019.2.25923 (2019/08/05).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#75 25596 C. Thomas Tyler Released SDP 2019.2.25594 (2019/05/02).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#74 25483 C. Thomas Tyler Released SDP 2019.1.25480 (2019/04/11).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#73 25389 C. Thomas Tyler Released SDP 2019.1.25386 (2019/03/21).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#72 25380 C. Thomas Tyler Released SDP 2019.1.25374 (2019/03/21).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#71 25317 Robert Cowham Copy up logic fix to mkdirs.sh to fix breaking test
#70 25311 C. Thomas Tyler Released SDP 2019.1.25309 (2019/03/07).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#69 25245 C. Thomas Tyler Released SDP 2019.1.25238 (2019/03/02).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#68 23595 C. Thomas Tyler Released SDP 2018.1.23583 (2018/02/08).
Patch release to fix bug in mkdirs.sh (SDP-287).

Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
with selective removal of work-in-progress files.
#67 23510 C. Thomas Tyler Released SDP 2018.1.23504 (2018/01/19).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
with selective removal of work-in-progress files.
#66 23357 C. Thomas Tyler Released SDP 2017.4.23354 (2017/12/08).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#65 23331 C. Thomas Tyler Released SDP 2017.4.23329 (2017/12/05).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#64 23006 C. Thomas Tyler Released SDP 2017.3.23003 (2017/10/19).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#63 22950 akwan Provide an override for difference between proxy listening port and target port
#62 22685 Russell C. Jackson (Rusty) Update main with current changes from dev.
#61 22207 C. Thomas Tyler Released SDP 2017.2.22201 (2017/05/18).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#60 22185 C. Thomas Tyler Released SDP 2017.2.22177 (2017/05/17).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#59 21483 C. Thomas Tyler Released SDP 2016.2.21480 (2017/01/11).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#58 21338 C. Thomas Tyler Released SDP 2016.2.21328 (2016/12/16).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#57 21193 Russell C. Jackson (Rusty) Update main from dev.
#56 21128 C. Thomas Tyler Released SDP 2016.2.21123 (2016/11/22).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#55 21105 C. Thomas Tyler Released SDP 2016.2.21103 (2016/11/21).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#54 20997 C. Thomas Tyler Released SDP 2016.2.20995 (2016/11/07).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#53 20974 C. Thomas Tyler Released SDP 2016.2.20972 (2016/11/01).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#52 20792 C. Thomas Tyler Released SDP 2016.2.20790 (2016/09/30).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#51 20767 C. Thomas Tyler Released SDP 2016.2.20755 (2016/09/29).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#50 20481 C. Thomas Tyler Released SDP 2016.1.20460.

          Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
          with selective removal of changes related to work-in-progress files.
#49 20398 C. Thomas Tyler Released SDP 2016.1.20395.
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
with selective removal of changes related to work-in-progress files.
#48 20390 C. Thomas Tyler Released SDP 2016.1.20387.
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
with selective removal of changes related to work-in-progress files.
#47 20353 C. Thomas Tyler Released SDP 2016.1.20348.
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev',
with selective removal of changes related to work-in-progress
changes.
#46 20050 C. Thomas Tyler Released: 2016.1.20028 (2016/08/03).
Copy Up using 'p4 copy -r -b perforce_software-sdp-dev'.
#45 19414 C. Thomas Tyler Released SDP/MultiArch/2016.1/19410 (2016/05/17).
#44 18961 C. Thomas Tyler Released: SDP/MultiArch/2016.1/18958 (2016/04/08).
#43 18619 Russell C. Jackson (Rusty) Updating main with current changes.
#42 18530 Russell C. Jackson (Rusty) Update main from dev.
#41 16554 C. Thomas Tyler Changed storage for /p4/<n>/tmp dir to the /logs volume.

The /logs volume is typically local, and is not backed up.  Both
of these characteristics are desirable for TMP/P4TMP.  We don't
want to pay the typically high latency tax of shared storage solutions
used for the /depotdata for TMP/P4TMP.  And we don't want to
needlessly backup up a folder whose name implies it's not backed
up.

To Do:
* Make the corresponding change in the Windows SDP.
* Adjust docs as needed.

#review-16527 @russell_jackson
#40 16370 C. Thomas Tyler Changed 'p4admin' to 'perforce' as the default SDP P4USER,
now that LDAP integration is the prevailing norm.

#review-15815
#39 16348 Russell C. Jackson (Rusty) Added check for exiting binaries in /p4/common/bin since those will be the most
 up to date versions in an existing installation. The check helps when going back
 and adding another instance at a later date and you forgot to update the binaries
 in the SDP folder. Guess how I found that out...
#38 16265 Robert Cowham Fix tests broken by previous few changes.
#37 16259 Russell C. Jackson (Rusty) Created P4MASTERPORT in instance_vars to simplify logins to the master server in
 the other scripts.

 Changed other scripts to use P4MASTERPORT

 Added clean up of statejcopy and checkpoints.rep directory to weekly_sync_replica so that
 it properly resets a replica that is using journalcopy.

 Moved umask to instance_vars since it wasn't being picked up when running things via crontab

 Removed P4REPLICANAME from instance_vars since it wasn't being used anymore.

Added HOSTIP to mkdirs and to the P4PORT setting in instance vars so the server starts on
 a specific IP address rather than all on the server. This avoids a bug where rpl.forward.login
 doesn't work when logging in via localhost.
#36 15856 C. Thomas Tyler Replaced the big license comment block with a shortened
form referencing the LICENSE file included with the SDP
package, and also by the URL for the license file in
The Workshop.
#35 15691 Russell C. Jackson (Rusty) Changed to always create a checkpoints.rep directory on the logs volume so that moving
the pre-rotated journal back to be the live journal will be a move operation when doing
a failover.

Added a SHAREDDATA setting to p4_vars so that I could check for that in sync_replica and
weekly_sync replica. That allowed me to delete weekly_sync_shared_replica and sync_shared_replica.

Added cleanup of checkpoints.rep to sync_replica and weekly_sync_replica since that is
where the replica journals should always be located now.

Removed cleanup of checkpoints.rep from daily and weekly backup scripts since those
should not be handling replica file clean up.

The SDP is now designed to be used with the journalcopy and p4 pull -L commands rather
than the old style replication using just pull. Failover requires that you move the
pre-rotated journal that is in the checkpoints.rep directory back to
/p4/${SDP_INSTANCE}/logs/journal now along with updating the server.id file.
#34 14073 Russell C. Jackson (Rusty) Backed out changes that moved variables to p4_vars.
The variables are intended to be in instance vars
 to keep everything about a particular instance in one location. It was confusing for people to see
a setting in p4_vars and not understand that setting was being overridden in the instance vars.

 There shouldn't be any overlap between p4_vars and instance vars anymore.

Also, server.id is not optional. It must exist. It is how you control whether the instance is a master
 or a replica. It is not set by the scripts anymore because that was also confusing people. They would
 try to change the role of a server by changing server.id and we previously would just overwrite their
changes. Now, the SDP just reads the server.id so that the user has control over it. That doesn't
 confuse them since that is how our docs tells them to change a server's role.
#33 14045 Robert Cowham Move some stuff from instance_vars to p4_vars (or at least for defaults).
Clarify user messages.
#32 13991 Robert Cowham Clarify comments re SSL Prefix.
Also test mode informational messages.
#31 13908 C. Thomas Tyler Pushing SDP 2015.1.13906.
#30 12964 Russell C. Jackson (Rusty) Updated p4review complain from address.
#29 12387 Robert Cowham Change warning re not running as root.
Also clarify test output.
#28 12329 Russell C. Jackson (Rusty) Added check so script doesn't try to link logs when the logs directory
is on the depotdata volume.
#27 12150 Robert Cowham Fix test breakage - check for existence of ssl files before chmod'ing them
#26 12113 Russell C. Jackson (Rusty) Moved ssl dir to /p4.
There is no need for an ssl directory under each instance.

 There are also some signs of possible issues with the certificates residing on an
 NFS mounted volume in one environment so far.
#25 12067 Russell C. Jackson (Rusty) Changed mkdirs.sh to default to 1666 and added comment to replace the broker
 with command triggers.

 Added simple command trigger to block commands in the server.
#24 12008 Russell C. Jackson (Rusty) Added comment about the init directory.
#23 11975 Russell C. Jackson (Rusty) Skip chown on /tmp
#22 11919 Russell C. Jackson (Rusty) Added a SERVERID variable to p4_vars and updated backup_functions to use it.

 Changed the location and the names of the config files so that they could
 live in /p4/common/config (You're welcome Tom). The files names are:

 p4_$INSTANCE.vars
 p4_$INSTANCE.p4review.cfg

 p4_$INSTANCE.vars will now set P4REPLICA to FALSE if SERVERID matches
 MASTERNAME, otherwise it is TRUE.

 This change means that a user must change server.id now in order to change
 the role of the server rather than changing the instance vars file. This
 makes more sense to a user that is reading the admin guide about server.id
 rather than overwriting the file based on a setting that isn't in the admin guide.

 Change mkdirs to reflect all of the above changes.
#21 11913 Russell C. Jackson (Rusty) Added _ between instance and port in complain from.
#20 11912 Russell C. Jackson (Rusty) Corrected the location of a $ in the commented variables.
#19 11909 adrian_waters Change commented out entry P4PORT->P4_PORT so if uncomment the block of env settings if want auto-generated port numbers it doesn't fail unbound test (later code now used P4_PORT)
#18 11906 adrian_waters fix @11903 - to ensure comparing /p4 against /tmp/p4 when in test mode
#17 11903 adrian_waters Fix issue introduced in @11877 - the echo'd diff statements at end should compare /p4 against $P4DIR when in test mode
#16 11885 adrian_waters Add setting to trap unbounded variables;  caught/fixed one instance of error around test mode, so enhanced 'usage' check & test mode processing;  excluded setting ownership/perms on /tmp/p4/sdp in test mode
#15 11884 adrian_waters fix comparison to support non-numeric instance
#14 11883 adrian_waters fix unbounded use of P4BROKER_PORT_END (variable removed in #2)
#13 11878 Russell C. Jackson (Rusty) Corrected crontab name to p4.crontab in output when crontab's exist.

 Corrected test to remove p4.crontab and p4.crontab.replica - All Reb's fault.
#12 11877 Russell C. Jackson (Rusty) Changed all occurences of /p4 to $P4DIR

Fixed a couple of places that were missed to use SDP_COMMON.
#11 11876 Russell C. Jackson (Rusty) Changed to stop copying test and etc to the /p4/common folder since they
are not needed there. All etc files are generated during the mkdirs.sh
run from the sdp area.

Cleaned up path names using a SDP_COMMON and got rid of ETC_DIR.

Changed crontab and crontab.replica to p4.crontab and p4.crontab.replica
#10 11857 Russell C. Jackson (Rusty) Added a setting to control if checkpoints.rep gets created or not, and then
 a check to see if that directory exists. If it does, we reset CHECKPOINTS and
 run it a second time in the daily and weekly in order to keep the checkpoints.rep
 directory cleaned up when using a shared depotdata volume.
#9 11796 Russell C. Jackson (Rusty) Changed the chmod 750 so that it doesn't run over all the existing instances.
 That would make it horribly slow to create additional instances in an existing
 installation with a lot of files.

 Added variable to define the master instance, and then used that for making
 links to the license file and ssl dir in the master instance. This fixed a bug
 where we were checking for instance 1 for linking the license file. We cannot
 make that assumption when supporting named instances.
#8 11729 Russell C. Jackson (Rusty) Added check to only create crontab files if they don't exist.
Otherwise tell the user to copy the
section and update the instance.

Also moved the times in the replica out to allow more time for the checkpoint to complete.
#7 11724 adrian_waters SDP/mkdirs.sh - fix bug that prevents MAILTO being subsituted in the crontab / crontab.replica files
#6 11723 adrian_waters SDP/mkdirs.sh - fix bug that stopped REPL_MAILTO being substituted in p4_vars
#5 11720 adrian_waters Put extra trap to catch accidental missing of the instance param when running in test mode - otherwise get '-test' directories created!
#4 11679 Russell C. Jackson (Rusty) Added section you can uncomment to use 666 for port if desired.
#3 11570 Russell C. Jackson (Rusty) Brought in changes from Mark Foundry to add -S $MAILFROM to mail commands.

 Changed sync_replica.sh and weekly_sync_replica.sh to use $LOGFILE for consistency.

 Added mail command to both files as well.
#2 11524 Russell C. Jackson (Rusty) Released updated version of the SDP from Dev.
#1 10148 C. Thomas Tyler Promoted the Perforce Server Deployment Package to The Workshop.