instance_vars.template #38

#------------------------------------------------------------------------------
# Instance specific variables set/calculated in this file. This is not
# intended to be sourced directly. It is sourced when /p4/common/bin/p4_vars
# is sourced.
#
# IMPORTANT: This file is generated. If any site-local changes are made,
# they MUST be made after the '### MAKE LOCAL CHANGES HERE:' tag near the
# bottom of this file.

# Disable shellcheck requirement for shebang line, as this file is sourced
# in (from p4_vars) rather than executed as a script.
# shellcheck disable=SC2148

# This file is processed by mkdirs.sh to update REPL_* values as appropriate.
# It can subsequently be edited if required.

# Various scripts send email to $MAILTO.  This can contain comma-delimited list
# of email addresses (no spaces).
export MAILTO=REPL_MAILTO

# Specify the email adddress from which emails are sent in $MAILFROM.
# This must be exactly one email address.
export MAILFROM=REPL_MAILFROM

export P4USER=REPL_ADMINUSER
export P4SERVICEUSER=svc_${SERVERID}

# P4MASTER_ID is server.id of Master for this instance
export P4MASTER_ID=REPL_MASTER_ID

# The setting below should be ssl: if this instance uses ssl.
export SSL_PREFIX=REPL_SSLPREFIX

export P4PORTNUM=REPL_P4PORT
export P4PORT=${SSL_PREFIX}${P4PORTNUM}

# Set the value for P4BROKERPORT to Unset if the broker is not
# used.
export P4BROKERPORTNUM=REPL_P4BROKERPORT
export P4BROKERPORT=${SSL_PREFIX}${P4BROKERPORTNUM}

# These $P4D_FLAGS show when using 'ps' to scan the process table.
# Other settings affect p4d.
export P4D_FLAGS="-p $P4PORT -r $P4ROOT -J $P4JOURNAL -L $P4LOG -q -d --pid-file"

# Default values of the following - may be overwritten below
# This is the DNS name of the master server
export P4MASTERHOST=REPL_P4MASTERHOST
export P4MASTERPORT=${SSL_PREFIX}${P4MASTERHOST}:${P4PORTNUM}
export P4REPLICA=FALSE
# SHAREDDATA defaults FALSE, but is set to TRUE on replica servers that share their /hxdepots
# volume with their P4TARGET server - as per lbr.replication configurable
export SHAREDDATA=FALSE

# SERVERID is defined in /p4/n/root/server.id. 
if [[ -n "$SERVERID" && "$SERVERID" != "$P4MASTER_ID" ]]; then
   export P4REPLICA=TRUE

   if [[ -f "$P4ROOT/db.domain" && ! -f "$P4ROOT/P4ROOT_not_usable.txt" ]]; then
      # Use egrep becuase it works where we need it to. Shellcheck suggests
      # using 'grep -E' instead.
      # shellcheck disable=SC2196
      targetServerPort=$("$P4DBIN" -r "$P4ROOT" -cshow | egrep "^$SERVERID: P4TARGET = ")
      targetServerPort=${targetServerPort##* = }
      # Use 'echo' w/o quotes to remove leading/trailing whitepsace.
      # shellcheck disable=SC2116 disable=SC2086
      targetServerPort=$(echo $targetServerPort)
   else
      targetServerPort=$P4PORTNUM
   fi

   if [[ -n "$targetServerPort" ]]; then
      export P4MASTERPORT="$targetServerPort"
      if [[ "$targetServerPort" == *":"* ]]; then
         # strip off any trailing ':.....' element (e.g., ':1666')
         export P4MASTERHOST="${targetServerPort%:*}"
         # if P4TARGET includes ssl, also need to strip off ssl: from front
         export P4MASTERHOST="${P4MASTERHOST#*:}"
      fi
   fi

   repStyle="readonly"
   if [[ -f "$P4ROOT/db.domain" && ! -f "$P4ROOT/P4ROOT_not_usable.txt" ]]; then
      repStyle=$("$P4DBIN" -r "$P4ROOT" -cshow|"$GREP" "^$SERVERID: lbr.replication = ")
      repStyle=${repStyle##* = }
      # Use 'echo' w/o quotes to remove leading/trailing whitepsace.
      # shellcheck disable=SC2116 disable=SC2086
      repStyle=$(echo $repStyle)
   fi

   if [[ $repStyle == "shared" ]]; then
      # Used by p4verify.sh among others
      export SHAREDDATA=TRUE
   fi
fi

# Proxy settings
export PROXY_TARGET=${SSL_PREFIX}${P4MASTERHOST}:${P4BROKERPORTNUM}
export PROXY_PORT=${SSL_PREFIX}$((P4BROKERPORTNUM+1))

# P4DTG Settings:
export P4DTG_CFG=$P4SERVER

# If SNAPSHOT_SCRIPT is defined and set to the path of an executable
# script, daily_checkpoint.sh will call the referenced script to
# perform a snapshot. The following sample enable snapshots on the
# AWS master server only 
if [[ -n "$SERVERID" && "$SERVERID" == "$P4MASTER_ID" ]]; then
   export SNAPSHOT_SCRIPT=
   ###export SNAPSHOT_SCRIPT=/p4/common/cloud/aws/bin/snapshot.sh
else
   export SNAPSHOT_SCRIPT=
fi

# Set VERIFY_SDP_SKIP_TEST_LIST as an alternative to passing in a lists of tests
# using the '-skip' flag to the verify_sdp.sh script. The command line flag to
# the script is more appropriate if a test is to be skipped temporarily, while
# setting the VERIFY_SDP_SKIP_TEST_LIST variable is better for making a permanent
# exception (e.g. skipping crontab checks if some other scheduler is used).
# For more info, run: verify_sdp.sh -man
###export VERIFY_SDP_SKIP_TEST_LIST="crontab"
export VERIFY_SDP_SKIP_TEST_LIST=

export SDP_ALWAYS_LOGIN=0

# The SDP_MAX_START_DELAY_* settings are numeric values that define the maximum
# number of second to wait for services to start before considering the startup
# a failure in various SDP scripts. Successful start is indicated by being
# responsive to a 'p4 info' command and the appropriate port for each service.
export SDP_MAX_START_DELAY_P4D=120
export SDP_MAX_START_DELAY_P4BROKER=60
export SDP_MAX_START_DELAY_P4P=60

# The SDP_MAX_STOP_DELAY_* settings are numeric values that define the maximum
# number of second to wait for services to stop before considering the shutdown
# a failure in various SDP scripts. Successful stop is indicated by removal of
# the server.pid file for p4d, and lack of active pids for p4broker/p4p. These
# values are typically never used. Note that 'p4d' does not have a max delay.
export SDP_MAX_STOP_DELAY_P4BROKER=600
export SDP_MAX_STOP_DELAY_P4P=600

# Set SDP_AUTOMATION_USERS to a comma-delimited list of Perforce user accounts
# to login when the 'p4login' script is used with the '-automation' flag. This
# will normally be a list of users that operate trigger scripts, such as the
# 'swarm' user if Helix Swarm is used. Typically such users will have long-term
# tickets.  For more info, run: p4login -man
###export SDP_AUTOMATION_USERS=
export SDP_AUTOMATION_USERS="swarm"

umask 0026

#------------------------------------------------------------------------------
# Any local changes to this file that are intended to be persistent through
# future SDP upgrades must be made below the next line in this file. When
# doing SDP upgrades, be careful to evaluate whether site-local custom content
# below is impacted or perhaps even obsoleted due to SDP changes.
### MAKE LOCAL CHANGES HERE: