Swarm - guest/perforce_software/sdp/dev/doc/SDP

= Perforce Helix Server Deployment Package (for UNIX/Linux)
Perforce Professional Services <consulting@perforce.com>
:revnumber: v2021.1
:revdate: 2021-10-19
:doctype: book
:icons: font
:toc:
:toclevels: 5
:sectnumlevels: 4
:xrefstyle: full
// Attribute for ifdef usage
:unix_doc: true

== Preface

The Server Deployment Package (SDP) is the implementation of Perforce's recommendations for operating and managing a production Perforce Helix Core Version Control System. It is intended to provide the Helix Core administration team with tools to help:

* Simplify Management
* Simplify Upgrades
* High Availability (HA)
* Disaster Recovery (DR)
* Fast and Safe Upgrades
* Production Focus
* Best Practice Configurables
* Optimal Performance, Data Safety, and Simplified Backup

This guide is intended to provide instructions of setting up the SDP to help provide users of Helix Core with the above benefits.

This guide assumes some familiarity with Perforce and does not duplicate the basic information in the Perforce user documentation.
This document only relates to the Server Deployment Package (SDP). All other Helix Core documentation can be found here: https://www.perforce.com/support/self-service-resources/documentation[Perforce Support Documentation].

*Please Give Us Feedback*

Perforce welcomes feedback from our users. Please send any suggestions for improving this document or the SDP to consulting@perforce.com.

:sectnums:
== Overview

The SDP has four main components:

* Hardware and storage layout recommendations for Perforce.
* Scripts to automate critical maintenance activities
* Scripts to aid the setup and management of replication (including failover for DR/HA)
* Scripts to assist with routine administration tasks.

Each of these components is covered, in detail, in this guide.

=== Using this Guide

<<_setting_up_the_sdp>> describes concepts, terminology and pre-requisites

<<_installing_the_sdp_on_unix_linux>> consists of what you need to know to setup Helix Core sever on a Unix platform.

<<_backup_replication_and_recovery>> gives information around the Backup, Restoration and Replication of Helix Core, including some guidance on planning for HA (High Availability) and DR (Disaster Recovery)

<<_upgrades>> covers upgrades of `p4d` and related Helix Core executables.

<<_upgrading_the_sdp>> covers upgrading the SDP itself.

<<_maximizing_server_performance>> covers optimizations and proactive actions.

<<_tools_and_scripts>> covers all the scripts used within the SDP in detail.

<<_sdp_package_contents_and_planning>> describes the details of the SDP package.

<<The journalPrefix Standard>> describes the standard for setting the `journalPrefix` configurable.

<<_server_spec_naming_standard>> describes the standard for naming 'server' specs created with the `p4 server` command.

<<_frequently_asked_questionstroubleshooting>> is useful for other questions.

<<_starting_and_stopping_services>> gives on overview of starting and stopping services with common init mechanisms, `systemd` and SysV.

=== Getting the SDP

The SDP is downloaded as a single zipped tar file the latest version can be found at: https://swarm.workshop.perforce.com/projects/perforce-software-sdp/files/downloads

The file to download containing the latest SDP is consistently named `sdp.Unix.tgz`. A copy of this file also exists with a version-identifying name, e.g. `sdp.Unix.2019.3.26571.tgz`.

The direct download link to use with `curl` or `wget` is illustrated with this command:

curl -k -O https://swarm.workshop.perforce.com/projects/perforce-software-sdp/download/downloads/sdp.Unix.tgz

== Setting up the SDP

This section tells you how to configure the SDP to setup a new Helix Core server.

The SDP can be installed on multiple server machines, and each server machine can host one or more Helix Core server instances. See <<_terminology_definitions>> for detailed definition of terms.

The SDP implements a standard logical directory structure which can be implemented flexibly on one or many physical server machines.

Additional relevant information is available in the https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/Home-p4sag.html[System Administrator Guide].

=== Terminology Definitions

* *Instance* - a running instance of a process. It should normally be qualified as to what type of instance it is:
** *p4d instance* - a running instance of p4d with it's own copy of db.* files. P4D instances may be of any one of the standard types, e.g. standard or commit-server, and any of the valid replica types: forwarding-replica, edge-server etc.
** *p4p instance* – proxy instance talking to a single upstream p4d instance
** *p4broker instance* – p4broker talking to a single upstream p4d instance
* *Data set* - a logically independent set of (Helix Core) data comprising metadata (db.*) and versioned files (archive files). A data set consists of at least one p4d instance. It may consist of a federated set of p4d instances, one of which is a standard or commit-server and the others of which are replicas.
** You may have more than one "data set", even if running on the same set of machines (see below)
* *Server machine* - this is a host machine (virtual or physical) with operating system and on which any number of p4d or other types of instance may be running.
* *Server spec* or *server specification* - is the entity managed using `p4 server` command (and the companion `p4 servers` to list all of them).
* *Server* - this is a vague term. It needs to be fully qualified, and use on its own (unadorned) should be avoided since depending on context it may mean any one of:
** Server machine
** P4d instance (this is usually the most common usage - tend to assume this unless otherwise defined.)
** Any other type of instance!

IMPORTANT: Thus "p4d server" is unclear as to whether you are talking about a p4d instance or a server machine or a combination of both (since there may be a single instance on a single machine, or many instances on a machine, etc). Make sure you understand what is being referred to!

[arabic]
. The term _server_ refers to a Helix Core server _instance_, unless otherwise specified below.
. The term _metadata_ refers to the Helix Core database files.
. _Instance:_ a separate Helix Core instantiation, with its own data set, set of users, files and changelists managed by a p4d service.

== Pre-Requisites

[arabic]
. The Helix Core binaries (p4d, p4, p4broker, p4p) have been downloaded (see <<_installing_the_sdp_on_unix_linux>>)
. _sudo_ access is required
. System administrator available for configuration of drives / volumes (especially if on network or SAN or similar)
. Supported Linux version, currently these versions are fully supported - for other versions please speak with Perforce Support.

* Ubuntu 18.04 LTS (bionic)
* Ubuntu 20.04 LTS (focal fossa)
* CentOS or Red Hat (RHEL) 7.x
* CentOS or Red Hat (RHEL) 8.x
* SUSE Linux Enterprise Server 12

TIP: We have seen CentOS/RHEL perform noticeably better than Ubuntu with the same storage (e.g. All Flash arrays, and SAN drives) - and thus recommend it.

=== Volume Layout and Hardware

As can be expected from a version control system, good disk (storage) management is key to maximizing data integrity and performance. Perforce recommend using multiple physical volumes for *each* p4d server instance. Using three or four volumes per instance reduces the chance of hardware failure affecting more than one instance. When naming volumes and directories the SDP assumes the "hx" prefix is used to indicate Helix volumes. Your own naming conventions/standards can be used instead, though this is discouraged as it will create inconsistency with documentation. For optimal performance on UNIX machines, the XFS file system is recommended, but not mandated. The EXT4 filesystem is also considered proven and widely used.

* {blank}
+
*Depot data, archive files, scripts, and checkpoints*:
Use a large volume, with RAID 6 on its own controller with a standard amount of cache or a SAN or NAS volume (NFS access is fine).

This volume is the only volume that *must* be backed up.
The SDP backup scripts place the metadata snapshots on this volume.

+
This volume is normally called `/hxdepots`.

* {blank}
+
*Perforce metadata (database files), 1 or 2 volumes:*
Use the fastest volume possible, ideally SSD or RAID 1+0 on a dedicated controller with the maximum cache available on it. Typically a single volume is used, `/hxmetadata`. In some sites with exceptionally large metadata, 2 volumes are used for metadata, `/hxmetadata` and `/hxmetadata2`. Exceptionally large in this case means the metadata size on disk is such that (2x(size of db.* files)+room for growth) approaches or exceeds the storage capacity of the storage device used for metadata. That's driven by how big /hxmetadata volume. So if you have a 16T storage volume and your total size of db.* files is some ~7T or less (so ~14T total), that's probably a reasonable cutoff for the definition of "exceptionally large" in thix context.

IMPORTANT: Do not run anti-virus tools or back up tools against the `hxmetadata` volume(s) or `hxlogs` volume(s), because they can interfere with the operation of the Perforce server executable.

* {blank}
+
*Journals and logs:*
a fast volume, ideally SSD or RAID 1+0 on its own controller with the standard amount of cache on it.
This volume is normally called `/hxlogs` and can optionally be backed up.

+
If a separate logs volume is not available, put the logs on the `/hxmetadata` or `/hxmetadata1` volume, as metadata and logs have similar performance needs that differ from `/hxdepots`.

WARNING: Storing metadata and logs on the same volume is discouraged, since the redundancy benefit of the P4JOURNAL (stored on `/hxlogs`) is greatly reduced if P4JOURNAL is on the same volume as the metadata in the P4ROOT directory.

NOTE: If multiple controllers are not available, put the `/hxlogs` and `/hxdepots` volumes on the same controller.

The SDP will create a "convenience" directory containing links to the volumes for each instance named `/p4`. The volume layout is shown in <<_sdp_package_contents_and_planning>>. This convenience directory enables easy access to the different parts of the file system for each instance.

For example:

* `/p4/1/root` contains the database files for instance `1`

* `/p4/1/logs` contains the log files for instance `1`

* `/p4/1/bin` contains the binaries and scripts for instance `1`

* `/p4/common/bin` contains the binaries and scripts common to all instances

== Installing the SDP on Unix / Linux

=== Automated Install

If you are doing a "green field" install, a first-time installation on a new machine that does not yet have any Perforce Helix data, then the https://swarm.workshop.perforce.com/projects/perforce_software-helix-installer[Helix Installer] should be used.

=== Manual Install

The following documentation covers internal details of how the SDP can be deployed manually. Many of the steps below are performed by the Helix Installer.

To install Perforce Helix Server program and the SDP, perform the steps laid out below:

* Set up a user account, file system, and configuration scripts.
* Run the configuration script.
* Start the p4d instance and configure the required file structure for the SDP.

[.arabic]
. If it doesn't already exist, create a group called `perforce`:

sudo groupadd perforce

. Create a user called perforce and set the user's home directory to `/p4` on a local disk.

sudo useradd -d /home/perforce -s /bin/bash -m perforce -g perforce

. Allow the perforce user sudo access - Option 1 (full sudo)

sudo touch /etc/sudoers.d/perforce
sudo chmod 0600 /etc/sudoers.d/perforce
sudo echo "perforce ALL=(ALL) NOPASSWD:ALL" > /etc/sudoers.d/perforce
sudo chmod 0400 /etc/sudoers.d/perforce

. Allow the perforce user sudo access - Option 2 (limited sudo)

sudo touch /etc/sudoers.d/perforce
sudo chmod 0600 /etc/sudoers.d/perforce
vi /etc/sudoers.d/perforce

# Make the file look like this to give limited sudo,
# replacing EDTIME_HOSTNAME with the current machine
Cmnd_Alias P4_SVC = /usr/bin/systemctl start p4d_*, \
/usr/bin/systemctl start p4d_*, \
/usr/bin/systemctl stop p4d_*, \
/usr/bin/systemctl status p4d_*, \
/usr/bin/systemctl start p4dtg_*, \
/usr/bin/systemctl stop p4dtg_*, \
/usr/bin/systemctl status p4dtg_*, \
/usr/bin/systemctl start p4broker_*, \
/usr/bin/systemctl stop p4broker_*, \
/usr/bin/systemctl status p4broker_*, \
/usr/bin/systemctl start p4p_*, \
/usr/bin/systemctl stop p4p_*, \
/usr/bin/systemctl status p4p_*
perforce EDITME_HOSTNAME = (root) NOPASSWD: P4_SVC

sudo chmod 0600 /etc/sudoers.d/perforce

. Create or mount the OS server file system volumes (per layout in previous section)

* `/hxdepots`
* `/hxlogs`

+
and either:

* `/hxmetadata`

+
or

* `/hxmetadata1`
* `/hxmetadata2`

. These directories should be owned by: `perforce:perforce`

sudo chown -R perforce:perforce /hx*

. (Optional) if you have different root directories, or are putting all files into one mounted filesystem (only recommended for small repositories), then do something like the following:

+
Option 1, all under a single directory `/data`:

cd /data
mkdir hxmetadata hxlogs hxdepots
sudo chown -R perforce:perforce /data/hx*
cd /
ln -s /data/hx* .
sudo chown -h perforce:perforce /hx*

+
Option 2, different mounted root folders, e.g. `/P4metadata`, `/P4logs`, `/P4depots`:

sudo chown -R perforce:perforce /P4metadata /P4logs /P4depots
cd /
ln -s /P4Medata hxmetadata
ln -s /P4logs hxlogs
ln -s /P4depots hxdepots
sudo chown -h perforce:perforce /hx*

. Extract the SDP tarball.

cd /hxdepots
tar -xzf /WhereYouDownloaded/sdp.Unix.tgz

. Set environment variable SDP.

export SDP=/hxdepots/sdp

. Make the entire $SDP (`/hxdepots/sdp`) directory writable:

chmod -R +w $SDP

. Download the appropriate p4, p4d and p4broker binaries for your release and platform:

cd /hxdepots/sdp/helix_binaries
./get_helix_binaries.sh

+
If you want to ensure a particular release:

cd /hxdepots/sdp/helix_binaries
./get_helix_binaries.sh -r r20.2

==== Manual Install Initial setup

The next steps highlight the setup and configuration of a new Helix Core instance using the `mkdirs.sh` script included in the SDP.

[source]
.Usage
----
include::gen/mkdirs.sh.man.txt[]
----

IMPORTANT: If you use a "name" for the instance (not an integer) you MUST modify the P4PORT variable in the `mkdirs._name_.cfg` file.

NOTE: The instance name must map to the name of the cfg file or the default file will be used with potentially unexpected results.

For example, `mkdirs.sh 1` requires `mkdirs.1.cfg`, or `mkdirs.sh lon` requires `mkdirs.lon.cfg`

[start=3]
. Put the Perforce license file for the p4d server instance into `/p4/1/root`

NOTE: if you have multiple instances and have been provided with port-specific licenses by Perforce, the appropriate license file must be stored in the appropriate `/p4/<instance>/root` folder.

IMPORTANT: the license file must be renamed to simply the name `license`.

Your Helix Core instance is now setup, but not running. The next steps detail how to make the Helix Core p4d instance a system service.

You are then free to start up the `p4d` instance as documented in
<<_starting_and_stopping_services>>.

Please note that if you have configured SSL, then refer to <<_use_of_ssl>>.

===== Use of SSL

As documented in the comments in mkdirs.cfg, if you are planning to use SSL you need to set the value of:

SSL_PREFIX=ssl:

Then you need to put certificates in `/p4/ssl` after the SDP install or you can generate a self signed certificate as follows:

Edit `/p4/ssl/config.txt` to put in the info for your company. Then run:

/p4/common/bin/p4master_run <instance> /p4/<instance>/p4d_<instance> -Gc

For example using instance 1:

/p4/common/bin/p4master_run 1 /p4/1/bin/p4d_1 -Gc

In order to validate that SSL is working correctly:

source /p4/common/bin/p4_vars 1

Check that P4TRUST is appropriately set in the output of:

p4 set

Update the P4TRUST values:

p4 trust -y
p4 -p $P4MASTERPORT trust -y

Check the stored P4TRUST values:

p4 trust -l

Check you are not prompted for trust:

p4 login
p4 info

===== Configuration script mkdirs.cfg

The `mkdirs.sh` script executed above resides in `$SDP/Server/Unix/setup`. It sets up the basic directory structure used by the SDP. Carefully review the config file `mkdirs.**_instance_**.cfg` for this script before running it, and adjust the values of the variables as required. The important parameters are:

P4SERVICEPASS

a|
Password to use for Perforce superuser account - can be edited later in /p4/common/config/.p4password.p4_1.admin

Service User's password for replication - can be edited later - same dir as above.

|P4MASTERHOST |Fully qualified DNS name of the Perforce master server machine for this instance. If this p4d instance is an HA for an edge server this
should refer to the DNS of the edge server machine. Otherwise replicas should refer to the commit-server machine.
|===

For a detailed description of this config file it is fully documented with in-file comments, or see

==== SDP Init Scripts

The SDP includes templates for initialization scripts ("init scripts") that provide basic service `start`/`stop`/`status` functionality for a variety of Perforce server products, including:

* p4d
* p4broker
* p4p
* p4dtg

During initialization for an SDP instance, the SDP `mkdirs.sh` script creates a set of initialization scripts based on the templates, and writes them in the instance-specific bin folder (the "Instance Bin" directory), `/p4/_N_/bin`. For example, the `/p4/1/bin` folder for instance `1` might contain any of the following:

p4d_1_init
p4broker_1_init
p4p_1_init
p4dtg_1_init

The set of `*_init` files in the Instance Bin directory defines which services (p4d, p4broker, p4p, and/or p4dtg) are active for the given instance on the current machine. A common configuration is to run both p4d and p4broker together, or only run a p4p on a machine. Unused init scripts must be removed from the Instance Bin dir. For example, if a p4p is not needed for instance 1 on the current machine, then `/p4/1/bin/p4p_1_init` should be removed.

For example, the init script for starting p4d for instance 1 is `/p4/1/bin/p4d_1_init`. All init scripts accept at least `start`, `stop`, and `status` arguments. How the init scripts are called depends on whether your operating system uses the systemd or older SysV init mechanism. This is detailed in sections specific to each init mechanism below.

Templates for the init scripts are stored in:

/p4/common/etc/init.d

===== Configuring systemd

====== Configuring systemd for p4d

RHEL/CentOS 7 or 8, SuSE 12, Ubuntu (>= v16.04), Amazon Linux 2, and other Linux distributions utilize *systemd / systemctl* as the mechanism for controlling services, replacing the earlier SysV init process. Templates for systemd *.service files are included in the SDP distribution in `$SDP/Server/Unix/p4/common/etc/systemd/system`.

Note that using `systemd` is strongly recommended on systems that support it, for safety reasons. However, enabling services to start automatically on boot is optional.

To configure p4d for systemd, run these commands as the root user:

I=1

Replace the `1` on the right side of the `=` with your SDP instance name, e.g. xyz if your P4ROOT is /p4/xyz/root. Then:

cd /etc/systemd/system
sed -e "s:__INSTANCE__:$I:g" -e " s:__OSUSER__:perforce:g" $SDP/Server/Unix/p4/common/etc/systemd/system/p4d_N.service.t > p4d_${I}.service
chmod 644 p4d_${I}.service
systemctl daemon-reload

If you are configuring p4d for more than one instance, repeat the `I=` command with each instance name on the right side of the `=`, and then repeat the block of commands above.

Once configured, the following are sample management commands to start, stop, and status the service. These following commands are typically run as the `perforce` OSUSER using `sudo` where needed:

systemctl cat p4d_1
systemctl status p4d_1
sudo systemctl start p4d_1
sudo systemctl stop p4d_1

.Systemd Required if Configured

****

If you are using `systemd` and you have configured services as above, then you can no longer run the `\*_init` scripts directly for normal service `start`/`stop`, though they can still be used for `status`. The `sudo systemctl` commands **must** be used for `start`/`stop`. Attempting to run the underlying scripts directly will result in an error message if systemd is configured. This is for safety: systemd's concept of service status (up or down) is only reliable when systemd starts and stops the service itself. The SDP init scripts require the systemd mechanism (using the `systemctl` command) to be used if it is configured. This ensures that services will gracefully stop the service on reboot (which would otherwise present a risk of data corruption for p4d on reboot).

The SDP requires systemd to be used if it is configured, and we strongly recommend using system on systems that use it. We recommend this to eliminate the risk of corruption on reboot, and also for consistency of operations. However, the SDP does not require systemd to be used. The SDP uses `systemctl cat` of the service name (e.g. `p4d_1`) to determine if systemd is configured for any given service.

****

====== Configuring systemd for p4p

Configuring p4p for systemd is identical to the configuration the for p4d, except that you would replace `p4d` with `p4p` in the sample commands above for configuring p4d.

====== Configuring systemd for p4dtg

Configuring p4dtg for systemd is identical to the configuration the for p4d, except that you would replace `p4d` with `p4dtg` in the sample commands above for configuring p4d.

====== Configuring systemd p4broker - multiple configs

Configuring p4broker for systemd can be similar to configuration the for p4d, but there are extra options as you may choose to run multiple broker configurations. For example, you may have:

* a default p4broker configuration that runs when the service is live,
* a "Down for Maintenance" (DFM) broker used in place of the default broker during maintenance to help lock out users broadcasting a friendly message like "Perforce is offline for scheduled maintenance."
* SSL broker config enabling an SSL-encrypted connection to a server that might not yet require SSL encryption for all users.

The service name for the default broker configuration is always `p4broker_N`, where `N` is the instance name, e.g. `p4broker_1` for instance `1`. This uses the default broker config file, `/p4/common/config/p4_1.broker.cfg`.

.Host Specific Broker Config

****

For circumstances where host-specific broker configuration is required, the default broker will use a `/p4/common/config/p4_N.broker.<short-hostname>.cfg` if it exists, where `<short-hostname>` is whatever is returned by the command `hostname -s`. The logic in the broker init script will favor the host-specific config if found, otherwise it will use the standard broker config.

****

When alternate broker configurations are used, each alternate configuration file must have a separate systemd unit file associated with managing that configuration. The service file must specify a configuration tag name, such as 'dfm' or 'ssl'. That tag name is used to identify both the broker config file and the systemd unit file for that broker. If the broker config is intended to run concurrently with the default broker config, it must listen on a different port number than the one specified in the default broker config. If it is only intended to run in place of the standard config, as with a 'dfm' config, then it should listen on the same port number as the default broker if a default broker is used, or else the same port as the p4d server if brokers are used only for dfm. The systemd service for a broker intended to run only during maintenance should not be enabled, and thus only manually started/stopped as part of maintenance procedures.

TIP: If maintenance procedures involve a reboot of a server machine, you may also want to disable all services during maintenance and re-enable them afterward.

For example, say you want a default broker, a DFM broker, and an SSL broker for instance 1. The default and SSL brokers will run continuously, and the DFM broker only during scheduled maintenance. The following broker config files would be needed in `/p4/common/config`:

* `p4_1.broker.cfg` - default broker, targets p4d on port 1999, listens on port 1666
* `p4_1.broker.ssl.cfg` - SSL broker, targets p4d on port 1999, listens on port 1667
* `p4_1.broker.dfm.cfg` - DFM broker, targets p4d on port 1999 , listens on port 1666.

Then, create a systemd *.service file that references each config. For the default broker, use the template just as with p4d above. Do the following as the `root` user:

cd /etc/systemd/system
sed -e "s:__INSTANCE__:1:g" -e " s:__OSUSER__:perforce:g" $SDP/Server/Unix/p4/common/etc/systemd/system/p4broker_N.service.t > p4broker_1.service
chmod 644 p4broker_1.service
systemctl daemon-reload

Once configured, the following are sample management commands to start, stop, and status the service. These following commands are typically run as the `perforce` OSUSER using `sudo` where needed:

systemctl cat p4broker_1
systemctl status p4broker_1
sudo systemctl start p4broker_1
sudo systemctl stop p4broker_1

For the non-default broker configs for the SSL and DFM brokers, start by copying the default broker config to a new *.service file with `_ssl` or `_dfm` inserted into the name, like so:

cd /etc/systemd/system
cp p4broker_1.service p4broker_1_dfm.service
cp p4broker_1.service p4broker_1_ssl.service

Next, modify the p4broker_1_dfm.service file and p4broker_1_ssl.service files with a text editor, making the following edits:

* Find the string that says `using default broker config`, and change the word `default` to `dfm` or `ssl` as appropriate, so it reads something like `using dfm broker config`.
* Change the ExecStart and ExecStop definitions by appending the `dfm` or `ssl` tag. For example, change
these two lines:

ExecStart=/p4/1/bin/p4broker_1_init start
ExecStop=/p4/1/bin/p4broker_1_init stop

to look like this for the `dfm` broker:

ExecStart=/p4/1/bin/p4broker_1_init start dfm
ExecStop=/p4/1/bin/p4broker_1_init stop dfm

After any modifications to systemd *.services files are made, reload them into with:

systemctl daemon-reload

At this point, the services `p4broker_1`, `p4broker_1_dfm`, and `p4broker_1_ssl` can be started and stopped normally.

Finally, enable those services you want to start on boot. In our example here, we will enable the default and ssl broker services to start on boot, but not the DFM broker:

systemctl enable p4broker_1
systemctl enable p4broker_1_ssl

You must be aware of which configurations listen on the same port, and not try to runs those configurations concurrently. In this case, ensure the default and dfm brokers don't run at the same time. So, for example, you might start a maintenance window with:

sudo systemctl stop p4broker_1 p4d_1
sudo systemctl start p4broker_1_dfm

and end maintenance in the opposite order:

sudo systemctl stop p4broker_1_dfm
sudo systemctl start p4broker_1 p4d_1

Details may vary depending on what is occurring during maintenance.

===== Configuring SysV Init Scripts

To configure services for an instance on systems using the SysV init mechanism, run these commands as the `root` user: Repeat this step for all instance init scripts you wish to configure as system services.

cd /etc/init.d
ln -s /p4/1/bin/p4d_1_init
chkconfig --add p4d_1_init

With that done, you can `start`/`stop`/`status` the service as `root` by running commands like:

service p4d_1_init status
service p4d_1_init start
service p4d_1_init stop

On SysV systems, you can also run the underlying init scripts directly as either the `root` or `perforce` user. If run as `root`, the script becomes `perforce` immediately, so that no processing occurs as root.

==== Configuring Automatic Service Start on Boot

You may want to configure your server machine such that the Helix Core Server for any given instance (and/or Proxy and/or Broker) will start automatically when the machine boots.

This is done using Systemd or Init scripts as covered below.

===== Automatic Start for Systems using systemd

Once systemd services are configured, you can enable the service to start on boot with a command like this, run a s `root`:

systemctl enable p4d_1

The `enable` command configures the services to start automatically when the machine reboots, but does not immediately start the service. _Enabling services is optional_; you can start and stop the services manually regardless of whether it is enabled for automatic start on boot.

===== For systems using the SysV init mechanism

Once SysV services are configured, you can enable the service to start on boot with a command like this, run as `root`:

chkconfig p4d_1_init on

==== SDP Crontab Templates

The SDP includes basic crontab templates for master, replica, and edge servers in:

/p4/common/etc/cron.d

These define schedules for routine checkpoint operations, replica status checks, and email reviews.

==== Completing Your Server Configuration

. Ensure that the admin user configured above has the correct password defined in `/p4/common/config/.p4passwd.p4_1.admin`, and then run the `p4login1` script (which calls the `p4 login` command using the `.p4passwd.p4_1.admin` file).

. For new server instances, run this script, which sets several recommended configurables:

cd /p4/sdp/Server/setup/configure_new_server.sh 1

For existing servers, examine this file, and manually apply the `p4 configure` command to set configurables on your Perforce server instance.

Initialize the perforce user's crontab with one of these commands:

crontab /p4/p4.crontab

and customize execution times for the commands within the crontab files to suite the specific installation.

The SDP uses wrapper scripts in the crontab: `run_if_master.sh`, `run_if_edge.sh`, `run_if_replica.sh`. We suggest you ensure these are working as desired, e.g.

/p4/common/bin/run_if_master.sh 1 echo yes
/p4/common/bin/run_if_replica.sh 1 echo yes
/p4/common/bin/run_if_edge.sh 1 echo yes

The above should output `yes` if you are on the master (commit) machine (or replica/edge as appropriate), but otherwise nothing. Any issues with the above indicate incorrect values for `$MASTER_ID`, or for other values within `/p4/common/config/p4_1.vars` (assuming instance `1`). You can debug this with:

bash -xv /p4/common/bin/run_if_master.sh 1 echo yes

If in doubt contact support.

==== Validating your SDP installation

Source your SDP environment variables and check that they look appropriate - for <instance> `1`:

source /p4/common/bin/p4_vars 1

The output of `p4 set` should be something like:

P4CONFIG=/p4/1/.p4config (config 'noconfig')
P4ENVIRO=/dev/null/.p4enviro
P4JOURNAL=/p4/1/logs/journal
P4LOG=/p4/1/logs/log
P4PCACHE=/p4/1/cache
P4PORT=ssl:1666
P4ROOT=/p4/1/root
P4SSLDIR=/p4/ssl
P4TICKETS=/p4/1/.p4tickets
P4TRUST=/p4/1/.p4trust
P4USER=perforce

There is a script `/p4/common/bin/verify_sdp.sh`. Run this specifying the <instance> id, e.g.

/p4/common/bin/verify_sdp.sh 1

The output should be something like:

verify_sdp.sh v5.6.1 Starting SDP verification on host helixcorevm1 at Fri 2020-08-14 17:02:45 UTC with this command line:
/p4/common/bin/verify_sdp.sh 1

If you have any questions about the output from this script, contact support@perforce.com.
------------------------------------------------------------------------------
Doing preflight sanity checks.
Preflight Check: Ensuring these utils are in PATH: date ls grep awk id head tail
Verified: Essential tools are in the PATH.
Preflight Check: cd /p4/common/bin
Verified: cd works to: /p4/common/bin
Preflight Check: Checking current user owns /p4/common/bin
Verified: Current user [perforce] owns /p4/common/bin
Preflight Check: Checking /p4 and /p4/<instance> are local dirs.
Verified: P4HOME has expected value: /p4/1
Verified: This P4HOME path is not a symlink: /p4/1
Verified: cd to /p4 OK.
Verified: Dir /p4 is a local dir.
Verified: cd to /p4/1 OK.
Verified: P4HOME dir /p4/1 is a local dir.

Finishing with:

Verifications completed, with 0 errors and 0 warnings detected in 57 checks.

If it mentions something like:

Verifications completed, with 2 errors and 1 warnings detected in 57 checks.

then review the details. If in doubt contact Perforce Support: support@perforce.com

=== Setting your login environment for convenience

Consider adding this to your `.bashrc` for the perforce user as a convenience for when you login:

echo "source /p4/common/bin/p4_vars 1" >> ~/.bashrc

Obviously if you have multiple instances on the same machine you might want to setup an alias or two to quickly switch between them.

=== Configuring protections, file types, monitoring and security

After the server instance is installed and configured, either with the Helix Installer or a manual installation, most sites will want to modify server permissions ("Protections") and security settings. Other common configuration steps include modifying the file type map and enabling process monitoring. To configure permissions, perform the following steps:

[arabic]
. To set up protections, issue the `p4 protect` command. The protections table is displayed.

. Delete the following line:

write user * * //depot/...

. Define protections for your repository using groups. Perforce uses an inclusionary model. No access is given by default, you must specifically grant access to users/groups in the protections table. It is best for performance to grant users specific access to the areas of the depot that they need rather than granting everyone open access, and then trying to remove access via exclusionary mappings in the protect table even if that means you end up generating a larger protect table.

. To set the default file types, run the p4 typemap command and define typemap entries to override Perforce's default behavior.

. Add any file type entries that are specific to your site. Suggestions:

* For already-compressed file types (such as `.zip`, `.gz`, `.avi`, `.gif`), assign a file type of `binary+Fl` to prevent p4d from attempting to compress them again before storing them.
* For regular binary files, add `binary+l` to make so that only one person at a time can check them out.

+
A sample file is provided in `$SDP/Server/config/typemap`

If you are doing things like games development with `Unreal Engine` or `Unity`, then there
are specific recommended typemap to add in KB articles: https://community.perforce.com/s/[Search the Knowledge Base]

. To make your changelists default to restricted (for high security environments):

p4 configure set defaultChangeType=restricted

=== Operating system configuration

Check <<_maximizing_server_performance>> for detailed recommendations.

==== Configuring email for notifications

Use Postfix - which Integrates easily with Gmail, Office365 etc. Examples:

* https://www.howtoforge.com/tutorial/configure-postfix-to-use-gmail-as-a-mail-relay/
* https://support.google.com/accounts/answer/185833?hl=en#zippy=%2Cwhy-you-may-need-an-app-password

Please note that for Gmail:

* You must turn on 2FA for the account which is trying to create an app password
* The organisation must allow 2FA (2-Step Verification) - this is somethings turned off in Gsuite.

Testing of email once configured:

echo "Test email" | mail -s "Test email subject" user@example.com

If there are problems sending email, then this may find the problem:

grep postfix /var/log/*

=== Other server configurables

There are various configurables that you should consider setting for your server instance.

Some suggestions are in the file: `$SDP/Server/setup/configure_new_server.sh`

Review the contents and either apply individual settings manually, or edit the file and apply the newly edited version. If you have any questions, please see the https://www.perforce.com/manuals/cmdref/Content/CmdRef/configurables.configurables.html[configurables section in Command Reference Guide appendix] (get the right version for your server!). You can also contact support regarding questions.

=== Archiving configuration files

Now that the server instance is running properly, copy the following configuration files to the hxdepots volume for backup:

* Any init scripts used in `/etc/init.d` or any systemd scripts to `/etc/systemd/system`
* A copy of the crontab file, obtained using `crontab -l`.
* Any other relevant configuration scripts, such as cluster configuration scripts, failover scripts, or disk failover configuration files.

== Backup, Replication, and Recovery

Perforce server instances maintain _metadata_ and _versioned files_. The metadata contains all the information about the files in the depots. Metadata resides in database (db.*) files in the server instance's root directory (P4ROOT). The versioned files contain the file changes that have been submitted to the repository. Versioned files reside on the hxdepots volume.

This section assumes that you understand the basics of Perforce backup and recovery. For more information, consult the Perforce https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.backup.html[System Administrator's Guide] and https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/failover.html#Failover[failover].

=== Typical Backup Procedure

The SDP's maintenance scripts, run as `cron` tasks, periodically back up the metadata. The weekly sequence is described below.

*Seven nights a week, perform the following tasks:*

[arabic]
. Truncate the active journal.
. Replay the journal to the offline database. (Refer to Figure 2: SDP Runtime Structure and Volume Layout for more information on the location of the live and offline databases.)
. Create a checkpoint from the offline database.
. Recreate the offline database from the last checkpoint.

*Once a week, perform the following tasks:*

[arabic]
. Verify all depot files.

*Once every few months, perform the following tasks:*

[arabic]
. Stop the live server instance.
. Truncate the active journal.
. Replay the journal to the offline database. (Refer to Figure 2: SDP Runtime Structure and Volume Layout for more information on the location of the live and offline databases.)
. Archive the live database.
. Move the offline database to the live database directory.
. Start the live server instance.
. Create a new checkpoint from the archive of the live database.
. Recreate the offline database from the last checkpoint.
. Verify all depots.

This normal maintenance procedure puts the checkpoints (metadata snapshots) on the hxdepots volume, which contains the versioned files. Backing up the hxdepots volume with a normal backup utility like _rsync_ provides you with all the data necessary to recreate the server instance.

To ensure that the backup does not interfere with the metadata backups (checkpoints), coordinate backup of the hxdepots volume using the SDP maintenance scripts.

The preceding maintenance procedure minimizes server instance downtime, because checkpoints are created from offline or saved databases while the server instance is running.

NOTE: With no additional configuration, the normal maintenance prevents loss of more than one day's metadata changes. To provide an optimal http://en.wikipedia.org/wiki/Recovery_point_objective[Recovery Point Objective] (RPO), the SDP provides additional tools for replication.

=== Planning for HA and DR

// tag::HA_and_DR[]

The concepts for HA (High Availability) and DR (Disaster Recovery) are fairly similar - they are both types of Helix Core replica.

When you have server specs with `Services` field set to `commit-server`, `standard`, or `edge-server` - see https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/deployment-architecture.html[deployment architectures] you
should consider your requirements for how to recover from a failure to any such servers.

See also https://community.perforce.com/s/article/5434[Replica types and use cases]

The key issues are around ensuring that you have have appropriate values for the following measures for your Helix Core installation:

* RTO - Recovery Time Objective - how long will it take you to recover to a backup?
* RPO - Recovery Point Objective - how much data are you prepared to risk losing if you have to failover to a backup server?

We need to consider planned vs unplanned failover. Planned may be due to upgrading the core Operating System or some other dependency in your infrastructure, or a similar activity.

Unplanned covers risks you are seeking to mitigate with failover:

* loss of a machine, or some machine related hardware failure (e.g. network)
* loss of a VM cluster
* failure of storage
* loss of a data center or machine room
* etc...

So, if your main `commit-server` fails, how fast should be you be able to be up and running again, and how much data might you be prepared to lose? What is the potential disruption to your organisation if the Helix Core repository is down? How many people would be impacted in some way?

You also need to consider the costs of your mitigation strategies. For example, this can range from:

* taking a backup once per 24 hours and requiring maybe an hour or two to restore it. Thus you might lose up to 24 hours of work for an unplanned failure, and require several hours to restore.
* having a high availability replica which is a mirror of the server hardware and ready to take over within minutes if required

Having a replica for HA or DR is likely to reduce your RPO and RTO to well under an hour (<10 minutes if properly prepared for) - at the cost of the resources to run such a replica, and the management overhead to monitor it appropriately.

Typically we would define:

* An HA replica is close to its upstream server, e.g. in the same Data Center - this minimizes the latency for replication, and reduces RPO
* A DR replica is in a more remote location, so maybe risks being further behind in replication (thus higher RPO), but mitigates against catastrophic loss of a data center or similar. Note that "further behind" is still typically seconds for metadata, but can be minutes for submits with many GB of files.

==== Further Resources

* https://community.perforce.com/s/article/3166[High Reliability Solutions]

==== Creating a Failover Replica for Commit or Edge Server

A commit server instance is the ultimate store for submitted data, and also for any workspace state (WIP - work in progress) for users directly working with the commit server (part of the same "data set")

An edge server instance maintains its own copy of workspace state (WIP). If you have people connecting to an edge server, then any workspaces they create (and files they open for some action) will be only stored on the edge server. Thus it is normally recommended to have an HA backup server, so that users don't lose their state in case of failover.

There is a concept of a "build edge" which is an edge server which only supports build farm users. In this scenario it may be deemed acceptable to not have an HA backup server, since in the case of failure of the edge, it can be re-seeded from the commit server. All build farm clients would be recreated from scratch so there would be no problems.

==== What is a Failover Replica?

As of 2018.2 release, p4d supports a `p4 failover` command that performs a failover to a `standby` replica (i.e. a replica with `Services:` field value set to `standby` or `forwarding-standby`). Such a replica performs a `journalcopy` replication of metadata, with a local pull thread to update its `db.*` files.

See also: https://community.perforce.com/s/article/16462[Configuring a Helix Core Standby].

ifdef::unix_doc[]
On Unix the SDP script <<_using_mkrep_sh>> greatly simplifies the process of setting up a replica suitable for use with the `p4 failover` command.
endif::[]

==== Mandatory vs Non-mandatory Standbys

You can modify the server spec of a `standby` replica to make it `mandatory`.

When a `standby` server instance is configured as mandatory, the master/commit server will wait until this server confirms it has processed journal data before allow that journal data to be released to other replicas. This can simplify failover, since it provides a guarantee that no downstream servers are *ahead* of the replica.

Thus downstream servers can simply be re-directed to point to the standby and will carry on working without problems.

IMPORTANT: If a server which is marked as `mandatory` goes offline for any reason, the replication to other replicas will stop replicating. In this scenario, the server spec of the replica can be changed to `nomandatory`, and then replication will immediately resume (so long as the replication has not been offline for too long, typically several days or weeks depending on the KEEPJNLS setting).

If set to `nomandatory` then there is no risk of delaying downstream replicas, however there is equally no guarantee that they will be able to switch seamlessly over to the new server.

NOTE: We recommend creating `mandatory` replica(s) if the server is local to its commit server, and also if you have good monitoring in place to quickly detect replication lag or other issues.

To change a server spec to be `mandatory` or `nomandatory`, modify the server spec with a command like `p4 server p4d_ha_bos` to edit the form, and then change the value in the `Options:` field to be as desired, `mandatory` or `nomandatory`, and the save and exit the editor.

==== Server host naming conventions

This is recommended, but not a requirement for SDP scripts to implement failover.

* Use a name that does not indicate switchable roles, e.g. don't indicate in the name whether a host is a master/primary or backup, or edge server and its backup. This might otherwise lead to confusion once you have performed a failover and the host name is no longer appropriate.
* Use names ending numeric designators, e.g. -01 or -05. The goal is to avoid being in a post-failover situation where a machine with `master` or `primary` is actually the backup. Also, the assumption is that host names will never need to change.
* While you don't want switchable roles baked into the hostname, you can have static roles, e.g. use p4d vs. p4p in the host name (as those generally don't change). The p4d could be primary, standby, edge, edge's standby (switchable roles).
* Using a short geographic site is sometimes helpful/desirable. If used, use the same site tag used in the ServerID, e.g. aus.

ifdef::unix_doc[]
+
Valid site tags should be listed in: `/p4/common/config/SiteTags.cfg` - see <<_sitetags_cfg>>
endif::[]

* Using a short tag to indicate the major OS version is *sometimes* helpful/desirable, eg. c7 for CentOS 7, or r8 for RHEL 8. This is based on the idea that when the major OS is upgraded, you either move to new hardware, or change the host name (an exception to the rule above about never changing the hostname). This option maybe overkill for many sites.
* End users should reference a DNS name that may include the site tag, but would exclude the number, OS indicator, and server type (`p4d`/`p4p`/`p4broker`), replacing all that with just `perforce` or optionally just `p4`. General idea is that users needn't be bothered by under-the-covers tech of whether something is a proxy or replica.
* For edge servers, it is advisable to include `edge` in both the host and DNS name, as users and admins needs to be aware of the functional differences due to a server being an edge server.

Examples:

* `p4d-aus-r7-03`, a master in Austin on RHEL 7, pointed to by a DNS name like `p4-aus`.
* `p4d-aus-03`, a master in Austin (no indication of server OS), pointed to by a DNS name like `p4-aus`.
* `p4d-aus-r7-04`, a standby replica in Austin on RHEL 7, not pointed to by a DNS until failover, at which point it gets pointed to by `p4-aus`.
* `p4p-syd-r8-05`, a proxy in Sydney on RHEL 8, pointed to by a DNS name like `p4-syd`.
* `p4d-syd-r8-04`, a replica that replaced the proxy in Sydney, on RHEL 8, pointed to by a DNS name like `p4-syd` (same as the proxy it replaced).
* `p4d-edge-tok-s12-03`, an edge in Tokyo running SuSE12, pointed to by a DNS name like `p4edge-tok`.
* `p4d-edge-tok-s12-04`, a replica of an edge in Tokyo running SuSE12, not pointed to by a DNS name until failover, at which point it gets pointed to by `p4edge-tok`.

FQDNs (fully qualified DNS names) of short DNS names used in these examples would also exist, and would be based on the same short names.

// end::HA_and_DR[]

=== Full One-Way Replication

Perforce supports a full one-way https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/replication.html[replication] of data from a master server to a replica, including versioned files. The https://www.perforce.com/manuals/cmdref/Content/CmdRef/p4_pull.html#p4_pull[p4 pull] command is the replication mechanism, and a replica server can be configured to know it is a replica and use the replication command. The p4 pull mechanism requires very little configuration and no additional scripting. As this replication mechanism is simple and effective, we recommend it as the preferred replication technique. Replica servers can also be configured to only contain metadata, which can be useful for reporting or offline checkpointing purposes. See the Distributing Perforce Guide for details on setting up replica servers.

If you wish to use the replica as a read-only server, you can use the https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.broker.html[P4Broker] to direct read-only commands to the replica or you can use a forwarding replica. The broker can do load balancing to a pool of replicas if you need more than one replica to handle your load.

==== Replication Setup

To configure a replica server, first configure a machine identically to the master server (at least as regards the link structure such as `/p4`, `/p4/common/bin` and `/p4/**_instance_**/*`), then install the SDP on it to match the master server installation. Once the machine and SDP install is in place, you need to configure the master server for replication.

Perforce supports many types of replicas suited to a variety of purposes, such as:

* Real-time backup,
* Providing a disaster recovery solution,
* Load distribution to enhance performance,
* Distributed development,
* Dedicated resources for automated systems, such as build servers, and more.

We always recommend first setting up the replica as a read-only replica and ensuring that everything is working. Once that is the case you can easily modify server specs and configurables to change it to a forwarding replica, or an edge server etc.

==== Replication Setup for Failover

This is just a special case of replication, but implementing <<_what_is_a_failover_replica>>

Please note the section below <<_using_mkrep_sh>> which implements many details.

==== Pre-requisites for Failover

// tag::prerequisites_for_failover[]

These are vital as part of your planning.

* Obtain and install a license for your replica(s)

+
Your commit or standard server has a license file (tied to IP address), while your replicas do not require one to function as replicas.

+
However, in order for a replica to function as a replacement for a commit or standard server, it must have a suitable license installed.

+
This should be requested when the replica is first created. See the form: https://www.perforce.com/support/duplicate-server-request

* Review your authentication mechanism (LDAP etc) - is the LDAP server contactable from the replica machine (firewalls etc configured appropriately).
* Review all your triggers and how they are deployed - will they work on the failover host?

+
Is the right version of Perl/Python etc correctly installed and configured on the failover host with all imported libraries?

IMPORTANT: TEST, TEST, TEST!!! It is important to test the above issues as part of your planning. For peace of mind you don't want to be finding problems at the time of trying to failover for real, which may be in the middle of the night!

// end::prerequisites_for_failover[]

On Linux:

* Review the configuration of options such as <<_ensure_transparent_huge_pages_thp_is_turned_off>> and also <<_putting_server_locks_directory_into_ram>> are correctly configured for your HA server machine - otherwise you *risk reduced performance* after failover.

==== Using mkrep.sh

The SDP `mkrep.sh` script should be used to expand your Helix Topology, e.g. adding replicas and edge servers.

NOTE: When creating server machines to be used as Helix servers, the server machines should be named following a well-designed host naming convention. The SDP has no dependency on the convention used, and so any existing local naming convention can be applied. The SDP includes a suggested naming convention in <<_server_host_naming_conventions>>

[source]
.Usage
----
include::gen/mkrep.sh.man.txt[]
----

===== SiteTags.cfg

The `mkrep.sh` documentation references a SiteTags.cfg file used to register short tag names for geographic sites. Location is: `/p4/common/config/SiteTags.cfg`

.Example/Format
----
include::../Server/Unix/p4/common/config/SiteTags.cfg[]
----

===== Output of `mkrep.sh`

The output of `mkrep.sh` (which is also written to a log file in `/p4/<instance>/logs/mkrep.*`) describes a number of steps required to continue setting up the replica after the metadata configuration performed by the script is done.

==== Addition Replication Setup

In addition to steps recommended by `mkrep.sh`, there are other steps to be aware of to prepare a replica server machine.

==== SDP Installation

The SDP must first be installed on the replica server machine. If SDP already exists on the machine but not for the current instance, then `mkdirs.sh` must be used to add a new instance to the machine.

===== SSH Key Setup

SSH keys for the `perforce` operating system user should be setup to allow the `perforce` user to `ssh` and `rsync` among the Helix server machines in the topology. If no `~perforce/.ssh` directory exist on a machine, it can be created with this command:

=== Recovery Procedures

There are three scenarios that require you to recover server data:

Recover the hxdepots volume using your normal backup utilities.

|===

Restoring the metadata from a backup also optimizes the database files.

==== Recovering a master server from a checkpoint and journal(s)

The checkpoint files are stored in the `/p4/**_instance_**/checkpoints` directory, and the most recent checkpoint is named `p4_**_instance_**.ckp.**_number_**.gz`. Recreating up-to-date database files requires the most recent checkpoint, from `/p4/**_instance_**/checkpoints` and the journal file from `/p4/**_instance_**/logs`.

To recover the server database manually, perform the following steps from the root directory of the server (/p4/instance/root).

Assuming instance 1:

[arabic]
. Stop the Perforce Server by issuing the following command:

/p4/1/bin/p4_1 admin stop

. Delete the old database files in the `/p4/1/root/save` directory

. Move the live database files (db.*) to the save directory.

. Use the following command to restore from the most recent checkpoint.

/p4/1/bin/p4d_1 -r /p4/1/root -jr -z /p4/1/checkpoints/p4_1.ckp.####.gz

. To replay the transactions that occurred after the checkpoint was created, issue the following command:

/p4/1/bin/p4d_1 -r /p4/1/root -jr /p4/1/logs/journal

[arabic, start=6]
. Restart your Perforce server.

If the Perforce service starts without errors, delete the old database files from `/p4/instance/root/save`.

If problems are reported when you attempt to recover from the most recent checkpoint, try recovering from the preceding checkpoint and journal. If you are successful, replay the subsequent journal.
If the journals are corrupted, contact mailto:support@perforce.com[Perforce Technical Support].
For full details about backup and recovery, refer to the https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.backup.html[Perforce System Administrator's Guide].

==== Recovering a replica from a checkpoint

This is very similar to creating a replica in the first place as described above.

If you have been running the replica crontab commands as suggested, then you will have the latest checkpoints from the master already copied across to the replica through the use of <<_sync_replica_sh>>.

See the steps in the script <<_sync_replica_sh>> for details (note that it deletes the state and rdb.lbr files from the replica root directory so that the replica starts replicating from the start of a journal).

Remember to ensure you have logged the service user in to the master server (and that the ticket is stored in the correct location as described when setting up the replica).

==== Recovering from a tape backup

This section describes how to recover from a tape or other offline backup to a new server machine if the server machine fails. The tape backup for the server is made from the hxdepots volume. The new server machine must have the same volume layout and user/group settings as the original server. In other words, the new server must be as identical as possible to the server that failed.

To recover from a tape backup, perform the following steps (assuming instance `1`):

[arabic]
. Recover the hxdepots volume from your backup tape.
. Create the `/p4` convenience directory on the OS volume.
. Create the directories `/hxmetadata/p4/1/db1/save` and `/hxmetadata/p4/1/offline_db`.
. Create the directories `/hxmetadata/p4/1/db2/save` and `/hxmetadata/p4/2/offline_db`.
. Change ownership of these directories to the OS account that runs the Perforce processes.
. Switch to the Perforce OS account, and create a link in the `/p4` directory to `/hxdepots/p4/1`.
. Create a link in the `/p4` directory to `/hxdepots/p4/common`.
. As a super-user, reinstall and enable the Systemd service files or or SysV init scripts.
. Find the last available checkpoint, under `/p4/1/checkpoints`
. Recover the latest checkpoint by running:

/p4/1/bin/p4d_1 -r /p4/1/root -jr -z <last_ckp_file>

. Recover the checkpoint to the offline_db directory (assuming instance 1):

/p4/1/bin/p4d_1 -r /p4/1/offline_db -jr -z <last_ckp_file>

. Reinstall the Perforce server license to the server root directory.
. Start the perforce service by running 1/p4/1/bin/p4d_1_init start`
. Verify that the server instance is running.
. Reinstall the server crontab or scheduled tasks.
. Perform any other initial server machine configuration.
. Verify the database and versioned files by running the `p4verify.sh` script. Note that files using the https://www.perforce.com/manuals/cmdref/Content/CmdRef/file.types.synopsis.modifiers.html[+k] file type modifier might be reported as BAD! after being moved. Contact Perforce Technical Support for assistance in determining if these files are actually corrupt.

==== Failover to a replicated standby machine

See link:SDP_Failover_Guide.pdf[SDP Failover Guide (PDF)] or link:SDP_Failover_Guide.html[SDP Failover Guide (HTML)]
for detailed steps.

== Upgrades

This section describes both upgrades of the SDP itself, as well as upgrades of Helix software such as p4d, p4broker, p4p, and the the p4 command line client in the SDP structure.

=== Upgrade Order: SDP first, then Helix P4D

The SDP should be upgraded prior to the upgrade of Helix Core (P4D). If you are upgrading P4D to or beyond P4D 2019.1 from a prior version of P4D, you __must__ upgrade the SDP first. If you run multiple instances of P4D on a given machine (potentially each running different versions of P4D), upgrade the SDP first before upgrading any of the instances.

The SDP should also be upgraded before upgrading other Helix software on machines using the SDP, including p4d, p4p, p4broker, and p4 (the command line client).

Upgrading a Helix Core server instance in the SDP framework is a simple process involving a few steps.

=== SDP and P4D Version Compatibility

Starting with the SDP 2020.1 release, the released versions of SDP match released versions of P4D. So SDP r20.1 is guaranteed to work with P4D r20.1. In addition, the link:ReleaseNotes.html[SDP Release Notes] clarify all specific versions of P4D to be supported.

The SDP is often forward- and backward-compatible with P4D versions, but for best results they should be kept in sync by upgrading SDP before P4D. This is partly because the SDP contains logic that helps upgrade P4D, which can change as P4D evolves.

The SDP is aware of the P4D version, and has backward-compatibility logic to support older versions of P4D. This is guaranteed for supported versions of P4D. Backward compatibility of SDP with older versions of P4D may extend farther back, though without the "officially supported" guarantee.

=== Upgrading the SDP

Starting with the SDP 2021.1 release, upgrades of the SDP from 2020.1 and later will use a new mechanism. The SDP upgrade procedure starting form 2020.1 and later will be described in detail in 2021.1 release. Some highlights of the coming upgrade mechanisms:

* *Automated*: Upgrades from SDP 2020.1 will be automated with script(s) to be provided with each new version of the SDP.
* *Continuous*: Each new SDP version, starting from SDP 2021.1, will maintain the capability to upgrade from all prior versions, so long as the starting version is SDP 2020.1 or later.
* *Independent*: SDP upgrades will enable upgrades to new Helix Core versions, but will not directly cause Helix Core upgrades to occur immediately. Each Helix Core instance can be upgraded independently of the SDP on its own schedule.

If your current SDP is older than the 2020.1 release, see the link:SDP_Legacy_Upgrades.Unix.html[SDP Legacy Upgrade Guide (for Unix)] for information on upgrading SDP to SDP 2020.1 from any prior version (dating back to 2007).

=== Upgrading Helix Software with the SDP

The following outlines the procedure for upgrading Helix binaries using the SDP scripts.

==== Get Latest Helix Binaries

Acquire the latest Perforce Helix binaries to stage them for upgrade using the `get_helix_binaries.sh` script.

If you have multiple server machines with SDP, staging can be done with this script on one machine first, and then the `/hxdepots/sdp/helix_binaries` folder can be rsync'd to other machines.

Alternately, this script can be run on the each machine, but as patches can be released at any time, running it once and then distributing the helix_binaries directory internally via rsync is preferred to ensure all machines at your site deploy with the same binaries.

See <<_get_helix_binaries_sh>>

==== Upgrade Each Instance

Use the SDP `upgrade.sh` script to upgrade each instance of Helix on the current machine, using the staged binaries. The upgrade process handles all aspects of upgrading, including adjusting the database structure, executing commands to upgrade the p4d database schema, and managing the SDP symlinks in `/p4/common/bin`.

Instances can be upgraded independently of each other.

See <<_upgrade_sh>>.

==== Global Topology Upgrades - Outer to Inner

For any given instance, be aware of the Helix topology when performing upgrades, specifically whether that instance has replicas and/or edge servers. When replicas and edge servers exist (and are active), the order in which `upgrade.sh` must be run on different server machines matters. Perform upgrades following an "outer to inner" strategy.

For example, say for SDP instance 1, your site has the following server machines:

* bos-helix-01 - The master (in Boston, USA)
* bos-helix-02 - Replica of master (in Boston, USA)
* nyc-helix-03 - Replica of master (in New York, USA)
* syd-helix-04 - Edge Server (in Sydney, AU)
* syd-helix-05 - Replica of Sydney edge (in Sydney)

Envision the above topology with the master server in the center, and two concentric circles.

The Replica of the Sydney edge would be done first, as it is by itself in the outermost.

The Edge server and two Replicas of the master are all at the next inner circle. So bos-helix-02, nyc-helix-03, and syd-helix-04 could be upgraded in any order with respect to each other, or even simultaneously, as they are in the same circle.

The master is the innermost, and would be upgraded last.

If the user were logged in as as the `perforce` operating system user on a machine with properly configured SSH keys, the global topology could be done something like this (after distributing /hxddepots/sdp/helix_binaries to all machines):

ssh syd-helix-05 upgrade.sh
ssh syd-helix-04 upgrade.sh
ssh nyc-helix-03 upgrade.sh
ssh bos-helix-02 upgrade.sh
ssh bos-helix-01 upgrade.sh

== Database Modifications

Occasionally modifications are made to the Perforce database from one release to another. For example, server upgrades and some recovery procedures modify the database.

When upgrading the server, replaying a journal patch, or performing any activity that modifies the db.* files, you must restart the offline checkpoint process so that the files in the offline_db directory match the ones in the live server directory. The easiest way to restart the offline checkpoint process is to run the live_checkpoint script after modifying the db.* files, as follows:

/p4/common/bin/live_checkpoint.sh 1

This script makes a new checkpoint of the modified database files in the live `root` directory, then recovers that checkpoint to the `offline_db` directory so that both directories are in sync. This script can also be used anytime to create a checkpoint of the live database.

This command should be run when an error occurs during offline checkpointing. It restarts the offline checkpoint process from the live database files to bring the offline copy back in sync. If the live checkpoint script fails, contact Perforce Consulting at consulting@perforce.com.

== Maximizing Server Performance

The following sections provide some guidelines for maximizing the performance of the Perforce Helix Core Server, using tools provided by the SDP. More information on this topic can be found in the https://community.perforce.com/s/article/2529[Knowledge Base].

=== Ensure Transparent Huge Pages (THP) is turned off

This is reference https://community.perforce.com/s/article/3005[KB Article on Platform Notes]

There is a script in the SDP which will do this:

/p4/sdp/Server/Unix/setup/os_tweaks.sh

It needs to be run as `root` or using `sudo`. This will not persist after system is rebooted.

TIP: We recommend the usage of `tuned`

Install as appropriate for your Linux distribution (so as `root`):

yum install tuned

apt-get install tuned

. Create a customized `tuned` profile with disabled THP. Create a new directory in `/etc/tuned` directory with desired profile name:

mkdir /etc/tuned/nothp_profile

. Then create a new `tuned.conf` file for `nothp_profile`, and insert the new tuning info:

+
```
cat <<EOF > /etc/tuned/nothp_profile/tuned.conf
[main]
include= throughput-performance

[vm]
transparent_hugepages=never
EOF
```

. Make the script executable

chmod +x /etc/tuned/nothp_profile/tuned.conf

. Enable `nothp_profile` using the `tuned-adm` command.

tuned-adm profile nothp_profile

. This change will immediately take effect and persist after reboots. To verify if THP are disabled or not, run below command:

cat /sys/kernel/mm/transparent_hugepage/enabled
always madvise [never]

=== Putting server.locks directory into RAM

The `server.locks` directory is maintained in the $P4ROOT (so `/p4/1/root`) for a running server instance. This directory contains a tree of 17 byte long files which is used for lock co-ordination amongst p4d processes.

This directory can be removed every time the p4d instance is restarted, so it is safe to put it into a tmpfs filesystem.

Even on a large installation with many hundreds or thousands of users, this directory will be unlikely to exceed 1GB, so a 2GB filesystem will be ample.

Instructions (as user `root`):

. Create directory to mount, and change ownership to `perforce` user (or `$OSUSER` if SDP config specifies a different name)

mkdir /hxserverlocks
chown perforce:perforce /hxserverlocks

. Add a line to `/etc/fstab` (adjusting appropriately if `$OSUSER` is set to another value than `perforce`):

tmpfs /hxserverlocks tmpfs uid=perforce,gid=perforce,size=1G,mode=0755 0 0

. Mount the drive:

mount -a

. Check it is looking correct and has correct ownership (`perforce` or `$OSUSER`):

df -h
ls -la /hxserverlocks

As user `perforce` (or `$OSUSER`), set the configurable, specifying the serverid of your server (to ensure it is not set globally and picked up by all replicas):

p4 configure set <serverid>#server.locks.dir=<serverlocks dir>

e.g.

p4 configure set master.1#server.locks.dir=/hxserverlocks

This will take effect immediately - it does not require a server restart.

IMPORTANT: If you set this globally (without `serverid#` prefix), then you should ensure that all replicas have
a similarly named directory available (or bad things will happen!)

IMPORTANT: Consider failover options - so review your HA failover server configuration and create a similar entry
- otherwise if you failover then performance will be reduced.

=== Optimizing the database files

The Perforce Server's database is composed of b-tree files. The server does not fully rebalance and compress them during normal operation. To optimize the files, you must checkpoint and restore the server. This normally only needs to be done very few months.

To minimize the size of back up files and maximize server performance, minimize the size of the db.have and db.label files.

=== P4V Performance Settings

These are covered in: https://community.perforce.com/s/article/2878

=== Proactive Performance Maintenance

This section describes some things that can be done to proactively to enhance scalability and maintain performance.

==== Limiting large requests

To prevent large requests from overwhelming the server, you can limit the amount of data and time allowed per query by setting the MaxResults, MaxScanRows and MaxLockTime parameters to the lowest setting that does not interfere with normal daily activities. As a good starting point, set MaxScanRows to MaxResults * 3; set MaxResults to slightly larger than the maximum number of files the users need to be able to sync to do their work; and set MaxLockTime to 30000 milliseconds. These values must be adjusted up as the size of your server and the number of revisions of the files grow. To simplify administration, assign limits to groups rather than individual users.

To prevent users from inadvertently accessing large numbers of files, define their client view to be as narrow as possible, considering the requirements of their work. Similarly, limit users' access in the protections table to the smallest number of directories that are required for them to do their job.

Finally, keep triggers simple. Complex triggers increase load on the server.

==== Offloading remote syncs

For remote users who need to sync large numbers of files, Perforce offers a https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.proxy.html[proxy server]. P4P, the Perforce Proxy, is run on a machine that is on the remote users' local network. The Perforce Proxy caches file revisions, serving them to the remote users and diverting that load from the main server.

P4P is included in the Windows installer. To launch P4P on Unix machines, copy the `/p4/common/etc/init.d/p4p_1_init script` to `/p4/1/bin/p4p_1_init`. Then review and customize the script to specify your server volume names and directories.

P4P does not require special hardware but it can be quite CPU intensive if it is working with binary files, which are CPU-intensive to attempt to compress. It doesn't need to be backed up. If the P4P instance isn't working, users can switch their port back to the main server and continue working until the instance of P4P is fixed.

== Tools and Scripts

This section describes the various scripts and files provided as part of the SDP package.

=== General SDP Usage

This section presents an overview of the SDP scripts and tools, with details covered in subsequent sections.

==== Linux

Most scripts and tools reside in `/p4/common/bin`. The `/p4/<instance>/bin` directory (e.g. `/p4/1/bin`) contains scripts or links that are specific to that instance such as wrappers for the p4d executable.

Older versions of the SDP required you to always run important administrative commands using the `p4master_run` script, and specify fully qualified paths. This script loads environment information from `/p4/common/bin/p4_vars`, the central environment file of the SDP, ensuring a controlled environment. The `p4_vars` file includes instance specific environment data from `/p4/common/config/p4_**_instance_.**vars` e.g. `/p4/common/config/p4_1.vars`. The `p4master_run script` is still used when running p4 commands against the server unless you set up your environment first by sourcing p4_vars with the instance as a parameter (for bash shell: `source /p4/common/bin/p4_vars 1`). Administrative scripts, such as `daily_checkpoint.sh`, no longer need to be called with `p4master_run` however, they just need you to pass the instance number to them as a parameter.

When invoking a Perforce command directly on the server machine, use the p4_**__instance__** wrapper that is located in `/p4/**_instance_**/bin`. This wrapper invokes the correct version of the p4 client for the instance. The use of these wrappers enables easy upgrades, because the wrapper is a link to the correct version of the p4 client. There is a similar wrapper for the p4d executable, called p4d_**__instance__**.

NOTE: This wrapper is important to handle case sensitivity in a consistent manner, e.g. when running a Unix server in case-insensitive mode. If you just execute `p4d` directly when it should be case-insensitive, then you may cause problems, or commands will fail.

Below are some usage examples for instance 1.

Some maintenance scripts can be run from any client workspace, if the user has administrative access to Perforce.

==== Monitoring SDP activities

The important SDP maintenance and backup scripts generate email notifications when they complete.

For further monitoring, you can consider options such as:

* Making the SDP log files available via a password protected HTTP server.
* Directing the SDP notification emails to an automated system that interprets the logs.

=== Upgrade Scripts

==== get_helix_binaries.sh

[source]
.Usage
----
include::gen/get_helix_binaries.sh.man.txt[]
----

==== upgrade.sh

The `upgrade.sh` script is used to upgrade `p4d` and other Perforce Helix binaries on a given server machine.

The links for different versions of `p4d` are described in <<_p4d_versions_and_links>>

=== Legacy Upgrade Scripts

==== clear_depot_Map_fields.sh

[source]
.Usage
----
include::gen/upgrade.sh.man.txt[]
----

The `clear_depot_Map_fields.sh` script is used when upgrading to SDP from versions earlier than SDP 2020.1. Its usage is discussed in link:SDP_Legacy_Upgrades.Unix.html[SDP Legacy Upgrade Guide (for Unix)].

[source]
.Usage
----
include::gen/clear_depot_Map_fields.sh.man.txt[]
----

=== Core Scripts

The core SDP scripts are those related to checkpoints and other scheduled operations, and all run from `/p4/common/bin`.

If you `source /p4/common/bin/p4_vars <instance>` then the `/p4/common/bin` directory will be added to your $PATH.

==== p4_vars

The `/p4/common/bin/p4_vars` defines the SDP shell environment, as required by the Perforce Helix server process. This script uses a specified instance number as a basis for setting environment variables. It will look for and open the respective p4_<instance>.vars file (see next section).

This script also sets server logging options and configurables.

It is intended to be used by other scripts for common environment settings, and also by users for setting the environment of their Bash shell.

.Usage

source /p4/common/bin/p4_vars 1

See also: <<_setting_your_login_environment_for_convenience>>

==== p4_<instance>.vars

Defines the environment variables for a specific instance, including P4PORT etc.

This script is called by <<_p4_vars>> - it is not intended to be called directly by a user.

For instance `1`:

p4_1.vars

For instance `art`:

p4_art.vars

Occasionally you may need to edit this script to update variables such as `P4MASTERHOST` or similar.

*Location*: /p4/common/config

==== p4master_run

The `/p4/common/bin/p4master_run` is a wrapper script to other SDP scripts. This ensures that the shell environment is loaded from `p4_vars` before executing the script. It provides a '-c' flag for silent operation, used in many crontab so that email is sent from the scripts themselves.

This is especially useful for calling scripts that do not set their own shell environment, such as Python or Perl scripts. Historically it was used as a wrapper for all SDP scripts.

TIP: Many of the bash shell scripts in the SDP set their own environment (by doing `source /p4/common/bin/p4_vars N` for their instance); those bash shell scripts do *not* need to be called with the `p4master_run` wrapper.

==== daily_checkpoint.sh

The `/p4/common/bin/daily_checkpoint.sh` script configured by default to run six days a week using crontab. The script:

* truncates the journal
* replays it into the `offline_db` directory
* creates a new checkpoint from the resulting database files
* recreates the `offline_db` database from the new checkpoint.

This procedure rebalances and compresses the database files in the `offline_db` directory.

These can be rotated into the live (`root`) database, by the script <<_refresh_p4root_from_offline_db_sh>>

.Usage

/p4/common/bin/daily_checkpoint.sh <instance>
/p4/common/bin/daily_checkpoint.sh 1

==== recreate_offline_db.sh

The `/p4/common/bin/recreate_offline_db.sh` recovers the offline_db database from the latest checkpoint and replays any journals since then. If you have a problem with the offline database then it is worth running this script first before running <<_live_checkpoint_sh>>, as the latter will stop the server while it is running, which can take hours for a large installation.

Run this script if an error occurs while replaying a journal during daily checkpoint process.

This script recreates offline_db files from the latest checkpoint. If it fails, then
check to see if the most recent checkpoint in the `/p4/<instance>/checkpoints` directory is
bad (ie doesn't look like the right size compared to the others), and if so, delete it
and rerun this script. If the error you are getting is that the journal replay failed,
then the only option may be to run <<_live_checkpoint_sh>> script.

.Usage

/p4/common/bin/recreate_offline_db.sh <instance>
/p4/common/bin/recreate_offline_db.sh 1

==== live_checkpoint.sh

The `/p4/common/bin/live_checkpoint.sh` is used to initialize the SDP `offline_db`. It must be run once, typically manually during initial installation, before any other scripts that rely on the `offline_db` can be used, such as `daily_checkpoint.sh` and `rotate_journal.sh`.

This script can also be used in some cases to repair the `offline_db` if it has has become corrupt, e.g. due to a sudden power loss while checkpoint processing was running.

IMPORTANT: Be aware this script locks the live database for the duration of the checkpoint which can take hours for a large installation (please check the `/p4/1/logs/checkpoint.log` for the most recent output of `daily_checkpoint.sh` to see how long checkpoints take to create/restore).

Note that when a `live_checkpoint.sh` runs, the server will be unresponsive to users for a time. On a new installation this "hang time" will be imperceptible, but over time it can grow to minutes and eventually hours. The idea is that `live_checkpoint.sh` should be used only very sparingly, and is not scheduled as a routine operation.

This performs the following actions:

* Does a journal rotation, so the active P4JOURNAL file becomes numbered.
* Creates a checkpoint from the live database db.* files in the P4ROOT.
* Recovers the `offline_db` database from that checkpoint to rebalance and compress the files

Run this script when creating the server instance and if an error occurs while replaying a journal during the off-line checkpoint process.

.Usage

/p4/common/bin/live_checkpoint.sh <instance>
/p4/common/bin/live_checkpoint.sh 1

==== p4verify.sh

The `/p4/common/bin/p4verify.sh` script verifies the integrity of the 'archive' files, all versioned files in your repository. This script is run by crontab on a regular basis, typically weekly.

It verifies https://www.perforce.com/manuals/cmdref/Content/CmdRef/p4_verify.html[both shelves and submitted archive files]

Any errors in the log file (e.g. `/p4/1/logs/p4verify.log`) should be handled according to KB articles:

* https://community.perforce.com/s/article/3186[MISSING! errors from p4 verify]
* https://community.perforce.com/s/article/2404[BAD! error from p4 verify]

If in doubt contact support@perforce.com

Our recommendation is that you should expect this to be without error, and you should address errors sooner rather than later. This may involve obliterating unrecoverable errors.

NOTE: when run on replicas, this will also append the `-t` flag to the `p4 verify` command to ensure that MISSING files are scheduled for transfer. This is useful to keep replicas (including edge servers) up-to-date.

.Usage

/p4/common/bin/p4verify.sh <instance>
/p4/common/bin/p4verify.sh 1

[source]
----
include::gen/p4verify.sh.man.txt[]
----

==== p4login

The `/p4/common/bin/p4login` script is a convenience wrapper to execute a series of `p4 login` commands, using the administration password configured in `mkdirs.cfg` and subsequently stored in a text file: `/p4/common/config/.p4passwd
.p4_<instance>.admin`.

[source]
.Usage
----
include::gen/p4login.man.txt[]
----

==== p4d_<instance>_init

Starts the Perforce server instance. Can be called directly or as describe in <<_configuring_automatic_service_start_on_boot>> - it is
created by `mkdirs.sh` when SDP is installed.

IMPORTANT: Do not use directly if you have configured systemctl for systemd Linux distributions such as CentOS 7.x. This risks database corruption if `systemd` does not think the service is running when it actually is running (for example on shutdown systemd will just kill processes without waiting for them).

This script sources `/p4/common/bin/p4_vars`, then runs `/p4/common/bin/p4d_base` (<<_p4d_base>>).

.Usage

/p4/<instance>/bin/p4d_<instance>_init [ start | stop | status | restart ]
/p4/1/bin/p4d_1_init start

==== refresh_P4ROOT_from_offline_db.sh

The `/p4/common/bin/refresh_P4ROOT_from_offline_db.sh` script is intended to be used occasionally, perhaps monthly, quarterly, or on-demand, to help ensure that your live (`root`) database files are defragmented.

It will:

* stop p4d
* truncate/rotate live journal
* replay journals to offline_db
* switch the links between `root` and `offline_db`
* restart p4d

It also knows how to do similar processes on edge servers and standby servers or other replicas.

.Usage

/p4/common/bin/refresh_P4ROOT_from_offline_db.sh <instance>
/p4/common/bin/refresh_P4ROOT_from_offline_db.sh 1

==== run_if_master.sh

The `/p4/common/bin/run_if_master.sh` script is explained in <<_run_if_masteredgereplica_sh>>

==== run_if_edge.sh

The `/p4/common/bin/run_if_edge.sh` script is explained in <<_run_if_masteredgereplica_sh>>

==== run_if_replica.sh

The `/p4/common/bin/run_if_replica.sh` script is explained in <<_run_if_masteredgereplica_sh>>

==== run_if_master/edge/replica.sh

The SDP uses wrapper scripts in the crontab: `run_if_master.sh`, `run_if_edge.sh`, `run_if_replica.sh`. We suggest you ensure these are working as desired, e.g.

.Usage

/p4/common/bin/run_if_master.sh 1 echo yes
/p4/common/bin/run_if_replica.sh 1 echo yes
/p4/common/bin/run_if_edge.sh 1 echo yes

It is important to ensure these are returning the valid results for the server machine you are on.

Any issues with these scripts are likely configuration issues with `/p4/common/config/p4_1.vars` (for instance `1`)

=== More Server Scripts

These scripts are helpful components of the SDP that run on the server machine, but are not included in the default crontab schedules.

==== p4.crontab

Contains crontab entries to run the server maintenance scripts.

*Location*: /p4/sdp/Server/Unix/p4/common/etc/cron.d

==== verify_sdp.sh

The `/p4/common/bin/verify_sdp.sh` does basic verification of SDP setup.

[source]
.Usage
----
include::gen/verify_sdp.sh.man.txt[]
----

=== Other Scripts and Files

The following table describes other files in the SDP distribution. These files are usually not invoked directly by you; rather, they are invoked by higher-level scripts.

==== backup_functions.sh

The `/p4/common/bin/backup_functions.sh` script contains Bash functions used in other SDP scripts.

It is *sourced* (`source /p4/common/bin/backup_functions.sh`) by other scripts that use the common shared functions.

It is not intended to be called directly by the user.

==== broker_rotate.sh

The `/p4/common/bin/broker_rotate.sh` rotates the broker log file on an instance that only has the broker running.

It can be added to a crontab for e.g. daily log rotation.

.Usage

/p4/common/bin/broker_rotate.sh <instance>
/p4/common/bin/broker_rotate.sh 1

==== edge_dump.sh

The `/p4/common/bin/edge_dump.sh` script is designed to create a seed checkpoint for an Edge server.

An edge server is naturally filtered, with certain database tables (e.g.
db.have) excluded. In addition to implicit filtering, the server spec may
specify additional tables to be excluded, e.g. by using the
ArchiveDataFilter field of the server spec.

The script requires the SDP instance and the edge ServerID.

.Usage

/p4/common/bin/edge_dump.sh <instance> <edge server id>
/p4/common/bin/edge_dump.sh 1 p4d_edge_syd

It will output the full path of the checkpoint to be copied to the edge server and used with <<_recover_edge_sh>>

==== edge_vars

The `/p4/common/bin/edge_vars` file is sourced by scripts that work on edge servers.

It sets the correct list db.* files that are edge-specific in the
federated architecture. This version is dependent on the version of
p4d in use; this script accounts for the P4D version.

It is not intended for users to call directly.

==== edge_shelf_replicate.sh

The `/p4/common/bin/edge_shelf_replicate.sh` script is intended to be run on an edge server and will ensure that all shelves are replicated to that edge server (by running `p4 print` on them).

Only use if directed to by Perforce Support or Perforce Consulting.

==== load_checkpoint.sh

The `/p4/common/bin/load_checkpoint.sh` script loads a checkpoint into `root` and `offline_db` for commit/edge/replica instance.

IMPORTANT: This script will replace your `/p4/<instance>/root` database files! *Be careful!*

If you want to create db files in `offline_db` then use <<_recreate_offline_db_sh>>.

[source]
.Usage
----
include::gen/load_checkpoint.sh.man.txt[]
----

==== gen_default_broker_cfg.sh

The `/p4/common/bin/gen_default_broker_cfg.sh` script generates an SDP instance-specific variant of the generic P4Broker config file. Display to standard output.

Usage:

cd /p4/common/bin
gen_default_broker_cfg.sh 1 > /tmp/p4broker.cfg.ToBeReviewed

The final p4broker.cfg should end up here:

/p4/common/config/p4_${SDP_INSTANCE}.${SERVERID}.broker.cfg

==== journal_watch.sh

The `/p4/common/bin/journal_watch.sh` script will check diskspace available to P4JOURNAL and trigger a journal rotation based on specified thresholds. This is useful in case you are in danger of running out of disk space and your rotated journal files are stored on a separate partition than the active journal.

This script is using the following external variables:

* SDP_INSTANCE - The instance of Perforce that is being backed up. If not
set in environment, pass in as argument to script.
* P4JOURNALWARN - Amount of space left (K,M,G,%) before min journal space where an email alert is sent
* P4JOURNALWARNALERT - Send an alert if warn threshold is reached (true/false, default: false)
* P4JOURNALROTATE - Amount of space left (K,M,G,%) before min journal space to trigger a journal rotation
* P4OVERRIDEKEEPJNL - Allow script to temporarily override KEEPJNL to retain enough journals to replay against oldest checkpoint (true/false, default: false)

.Usage

/p4/common/bin/journal_watch.sh <P4JOURNALWARN> <P4JOURNALWARNALERT> <P4JOURNALROTATE> <P4OVERRIDEKEEPJNL (Optional)>

.Examples

Run from CLI that will warn via email if less than 20% is available and rotate journal when less than 10% is available

./journal_watch.sh 20% TRUE 10% TRUE

Cron job that will warn via email if less than 20% is available and rotate journal when less than 10% is available

30 * * * * [ -e /p4/common/bin ] && /p4/common/bin/run_if_master.sh ${INSTANCE} /p4/common/bin/journal_watch.sh ${INSTANCE} 20\% TRUE 10\% TRUE

==== kill_idle.sh

The `/p4/common/bin/kill_idle.sh` script runs `p4 monitor terminate` on all processes showing in the output of `p4 monitor show` that are in the IDLE state.

.Usage

/p4/common/bin/kill_idle.sh <instance>
/p4/common/bin/kill_idle.sh 1

==== p4d_base

The `/p4/common/bin/p4d_base` script is the script to start/stop/restart the `p4d` instance.

It is called by `p4d_<instance>_init` script (and thus also `systemctl` on systemd Linux distributions). It is not intended to be called by users directly.

==== p4broker_base

The `/p4/common/bin/p4broker_base` script is very similar to <<_p4d_base>> but for the `p4broker` service instance.

See https://www.perforce.com/manuals/p4dist/Content/P4Dist/chapter.broker.html[p4broker in SysAdmin Guide]

==== p4ftpd_base

The `/p4/common/bin/p4ftpd_base` script is very similar to <<_p4d_base>> but for the `p4ftp` service instance. The p4ftp has been deprecated; this may be removed in a future SDP release.

This product is very seldom used these days!

See https://www.perforce.com/manuals/p4ftp/index.html[P4FTP Installation Guide.]

==== p4p_base

The `/p4/common/bin/p4p_base` is very similar to <<_p4d_base>> but for the `p4p` (P4 Proxy) service instance.

See https://www.perforce.com/manuals/p4dist/Content/P4Dist/chapter.proxy.html[p4proxy in SysAdmin Guide]

==== p4pcm.pl

The `/p4/common/bin/p4pcm.pl` script is a utility to remove files in the proxy cache if the amount of free disk space falls below the low threshold.

[source]
.Usage
----
include::gen/p4pcm.pl.man.txt[]
----

==== p4review.py

The `/p4/common/bin/p4review.py` script sends out email containing the change descriptions to users who are configured as reviewers for affected files (done by setting the Reviews: field in the user specification). This script is a version of the `p4review.py` script that is available on the Perforce Web site, but has been modified to use the server instance number. It relies on a configuration file in `/p4/common/config`, called `p4_<instance>.p4review.cfg`.

This is not required if you have installed Swarm which also performs notification functions and is easier for users to configure.

.Usage

/p4/common/bin/p4review.py # Uses config file as above

==== p4review2.py

The `/p4/common/bin/p4review2.py` script is an enhanced version of <<_p4review_py>>

. Run p4review2.py --sample-config > p4review.conf
. Edit the file p4review.conf
. Add a crontab similar to this:

* * * * * python2.7 /path/to/p4review2.py -c /path/to/p4review.conf

Features:

* Prevent multiple copies running concurrently with a simple lock file.
* Logging support built-in.
* Takes command-line options.
* Configurable subject and email templates.
* Use P4Python when available and use P4 (the CLI) as a fallback.
* Option to send a __single__ email per user per invocation instead of multiple ones.
* Reads config from a INI-like file using ConfigParser
* Have command line options that overrides environment variables.
* Handles unicode-enabled server **and** non-ASCII characters on a non-unicode-enabled server.
* Option to opt-in (--opt-in-path) reviews globally (for migration
from old review daemon).
* Configurable URLs for changes/jobs/users (for swarm).
* Able to limit the maximum email message size with a configurable.
* SMTP auth and TLS (not SSL) support.
* Handles P4AUTH (optional; use of P4AUTH is no longer recommended).

==== p4sanity_check.sh

The `/p4/common/bin/p4sanity_check.sh` script is a simple script to run:

* p4 set
* p4 info
* p4 changes -m 10

.Usage

/p4/common/bin/p4sanity_check.sh <instance>
/p4/common/bin/p4sanity_check.sh 1

==== p4dstate.sh

The `/p4/common/bin/p4dstate.sh` is a trouble-shooting script for use when directed by support, e.g. in situations such as server hanging, major locking problems etc.

It is an "SDP-aware" version of the https://community.perforce.com/s/article/15261[standard p4dstate.sh] so that it only requires the SDP instance to be specified as a parameter (since the location of logs etc are defined by SDP).

.Usage

sudo /p4/common/bin/p4dstate.sh <instance>
sudo /p4/common/bin/p4dstate.sh 1

==== ps_functions.sh

The `/p4/common/bin/ps_functions.sh` library file contains common functions for using 'ps' to check on process ids. It is not intended to be called by users.

get_pids ($exe)

.Usage

Call with an exe name, e.g. /p4/1/bin/p4web_1

.Examples

p4web_pids=$(get_pids $P4WEBBIN)
p4broker_pids=$(get_pids $P4BROKERBIN)

==== pull.sh

The `/p4/common/bin/pull.sh` is a reference pull trigger implementation for https://community.perforce.com/s/article/15337[External Archive Transfer using pull-archive and edge-content triggers]

It is a fast content transfer mechanism using Aspera (and can be adapted to other similar UDP based products.) An Edge server uses this trigger to pull files from its upstream Commit server. It replaces or augments the built in replication archive pull and is useful in scenarios where there are lots of large (binary) files and commit/edge are geographically distributed with high latency and/or low bandwidth between them.

See also companion trigger <<_submit_sh>>.

It is based around getting a list of files to copy from commit to edge, then doing the file transfer using `ascp` (Aspera file copy).

The configurable `pull.trigger.dir` should be set to a temp folder like `/p4/1/tmp`.

Startup commands look like:

startup.2=pull -i 1 -u --trigger --batch=1000

The trigger entry for the pull commands looks like this:

pull_archive pull-archive pull "/p4/common/bin/triggers/pull.sh %archiveList%"

There are some pull trigger options, but the are not necessary with Aspera. Aspera works best if you give it the max batch size of 1000 and set up 1 or more threads. Note, that each thread will use the max bandwidth you specify, so a single pull-trigger thread is probably all you will want.

The `ascp` user needs to have ssl public keys set up or export `ASPERA_SCP_PASS`.

The `ascp` user should be set up with the target as / with full write access to the volume where the depot files are located. The easiest way to do that is to use the same user that is running the p4d service.

TIP: ensure ascp is correctly configured and working in your environment: https://www-01.ibm.com/support/docview.wss?uid=ibm10747281 (search for "ascp connectivity testing")

Standard SDP environment is assumed, e.g P4USER, P4PORT, OSUSER, P4BIN, etc. are set, PATH is appropriate, and a super user is logged in with a non-expiring ticket.

IMPORTANT: Read the trigger comments for any customization requirements required for your environment.

See also the test version of the script: <<_pull_test_sh>>

See the `/p4/common/bin/triggers/pull.sh` script for details and to customize for your environment.

==== pull_test.sh

The `/p4/common/bin/pull_test.sh` script is a test script.

IMPORTANT: THIS IS A TEST SCRIPT - it substitutes for <<_pull_sh>> which uses Aspera's `ascp` and replaces that with Linux standard `scp` utility. **IT IS NOT INTENDED FOR PRODUCTION USE!!!!**

If you don't have an Aspera license, then you can test with this script to understand the process.

See the `/p4/common/bin/triggers/pull_test.sh` script for details.

There is a demonstrator project showing usage: https://github.com/rcowham/p4d-edge-pull-demo

==== purge_revisions.sh

The `/p4/common/bin/purge_revisions.sh` script will allow you to archive files and optionally purge files based on a configurable number of days and minimum revisions that you want to keep. This is useful if you want to keep a certain number of days worth of files instead of a specific number of revisions.

Note: If you run this script with purge mode disabled, and then enable it after the fact, all previously archived files specified in the configuration file will be purged if the configured criteria is met.

Prior to running this script, you may want to disable server locks for archive to reduce impact to end users.

See: https://www.perforce.com/perforce/doc.current/manuals/cmdref/Content/CmdRef/configurables.configurables.html#server.locks.archive

Parameters:

* SDP_INSTANCE - The instance of Perforce that is being backed up. If not set in environment, pass in as argument to script.
* P4_ARCHIVE_CONFIG - The location of the config file used to determine retention. If not set in environment, pass in as argument to script. This can be stored on a physical disk or somewhere in perforce.
* P4_ARCHIVE_DEPOT - Depot to archive the files in (string)
* P4_ARCHIVE_REPORT_MODE - Do not archive revisions; report on which revisions would have been archived (bool - default: true)
* P4_ARCHIVE_TEXT - Archive text files (or other revisions stored in delta format, such as files of type binary+D) (bool - default: false)
* P4_PURGE_MODE - Enables purging of files after they are archived (bool - default: false)

.Config File Format

The config file should contain a list of file paths, number of days and minimum
of revisions to keep in a tab delimited format.

Example:

//test/1.txt 10 1
//test/2.txt 1 3
//test/3.txt 10 10
//test/4.txt 30 3
//test/5.txt 30 8

.Usage

/p4/common/bin/purge_revisions.sh <SDP_INSTANCE> <P4_ARCHIVE_CONFIG> <P4_ARCHIVE_DEPOT> <P4_ARCHIVE_REPORT_MODE (Optional)> 4_ARCHIVE_TEXT (Optional)> <P4_PURGE_MODE (Optional)>

.Examples

Run from CLI that will archive files as defined in the config file

./purge_revisions.sh 1 /p4/common/config/p4_1.p4purge.cfg archive FALSE

Cron job that will will archive files as defined in the config file, including text files

30 0 * * * [ -e /p4/common/bin ] && /p4/common/bin/run_if_master.sh ${INSTANCE} /p4/common/bin/purge_revisions.sh $INSTANCE} /p4/common/config/p4_1.p4purge.cfg archive FALSE FALSE

==== recover_edge.sh

The `/p4/common/bin/recover_edge.sh` script is designed to rebuild an Edge server from a seed checkpoint from the master while keeping the existing edge specific data.

You have to first copy the seed checkpoint from the master, created with
<<_edge_dump_sh>>, to the edge server before running this script. (Alternately,
a full checkpoint from the master can be used so long as the edge server
spec does not specify any filtering, e.g. does not use ArchiveDataFilter.)

Then run this script on the Edge server host with the instance number and full
path of the master seed checkpoint as parameters.

.Usage

/p4/common/bin/recover_edge.sh <instance> <absolute path to checkpoint>
/p4/common/bin/recover_edge.sh 1 /p4/1/checkpoints/p4_1.edge_syd.seed.ckp.9188.gz

==== replica_cleanup.sh

The `/p4/common/bin/replica_cleanup.sh` script performs the following actions for a replica:

* rotate logs
* remove old checkpoints and journals
* remove old logs

This should be used on replicas for which the `sync_replica.sh` is not used.

.Usage

/p4/common/bin/replica_cleanup.sh <instance>
/p4/common/bin/replica_cleanup.sh 1

==== replica_status.sh

The `/p4/common/bin/replica_status.sh` script is regularly run by crontab on a replica or edge (using <<_run_if_replica_sh>>).

0 8 * * * [ -e /p4/common/bin ] && /p4/common/bin/run_if_replica.sh ${INSTANCE} /p4/common/bin/replica_status.sh ${INSTANCE} > /dev/null
0 8 * * * [ -e /p4/common/bin ] && /p4/common/bin/run_if_edge.sh ${INSTANCE} /p4/common/bin/replica_status.sh ${INSTANCE} > /dev/null

It performs a `p4 pull -lj` command on the replica to report current replication status, and emails this to the standard SDP administrator email on a daily basis. This is useful for monitoring purposes to detect replica lag or similar problems.

If you are using enhance monitoring such as https://github.com/perforce/p4prometheus[p4prometheus] then this script may not be required.

.Usage

/p4/common/bin/replica_status.sh <instance>
/p4/common/bin/replica_status.sh 1

==== request_replica_checkpoint.sh

The `/p4/common/bin/request_replica_checkpoint.sh` script is intended to be run on a standby replica. It essentially just calls 'p4 admin checkpoint -Z' to request a checkpoint and exits. The actual checkpoint is created on the next journal rotation on the master.

.Usage

/p4/common/bin/request_replica_checkpoint.sh <instance>
/p4/common/bin/request_replica_checkpoint.sh 1

==== rotate_journal.sh

The `/p4/common/bin/rotate_journal.sh` script is a convenience script to perform the following actions for the specified instance (single parameter):

* rotate live journal
* replay it to the `offline_db`
* rotate logs files according to the settings in `p4_vars` for things like `KEEP_LOGS`

It has several use cases:

* For sites with large, long-running checkpoints, it can be used to schedule journal rotations to occur more frequently than `daily_checkpoint.sh` is run.
* It can be used to trigger checkpoints to run on edge servers.

.Usage

/p4/common/bin/rotate_journal.sh <instance>
/p4/common/bin/rotate_journal.sh 1

==== submit.sh

The `/p4/common/bin/submit.sh` script is an example submit trigger for https://community.perforce.com/s/article/15337[External Archive Transfer using pull-archive and edge-content triggers]

This is a reference edge-content trigger for use with an Edge/Commit server topology - the
Edge server uses this trigger to transmit files which are being submitted to the Commit instead
of using its normal file transfer mechanism.
This trigger uses Aspera for fast file transfer, and UDP, rather than TCP and is typically
much faster, especially with high latency connections.

Companion trigger/script to <<_pull_sh>>

Uses `fstat -Ob` with some filtering to generate a list of files to be copied.
Create a temp file with the filename pairs expected by ascp, and
then perform the copy.

This configurable must be set:

rpl.submit.nocopy=1

The edge-content trigger looks like this:

EdgeSubmit edge-content //... "/p4/common/bin/triggers/ascpSubmit.sh %changelist%"

The `ascp` user needs to have ssl public keys set up or export `ASPERA_SCP_PASS`.
The `ascp` user should be set up with the target as / with full write access to the volume where
the depot files are located. The easiest way to do that is to use the same user that is
running the p4d service.

TIP: ensure `ascp` is correctly configured and working in your environment:
https://www-01.ibm.com/support/docview.wss?uid=ibm10747281
(search for "ascp connectivity testing")

Standard SDP environment is assumed, e.g P4USER, P4PORT, OSUSER, P4BIN, etc.
are set, PATH is appropriate, and a super user is logged in with a non-expiring
ticket.

See the test version of this script below: <<_submit_test_sh>>

See the `/p4/common/bin/triggers/submit.sh` script for details and to customize for your environment.

==== submit_test.sh

The `/p4/common/bin/submit_test.sh` script is a test script.

IMPORTANT: THIS IS A TEST SCRIPT - it substitutes for <<_submit_sh>> (which uses Aspera) - and replaces `ascp` with Linux standard `scp`.
IT IS NOT INTENDED FOR PRODUCTION USE!!!!

If you don't have an Aspera license, then you can test with this script
to understand the process.

See the `/p4/common/bin/triggers/submit_test.sh` for details.

There is a demonstrator project showing usage: https://github.com/rcowham/p4d-edge-pull-demo

==== sync_replica.sh

The `/p4/common/bin/sync_replica.sh` script is included in the standard crontab for a replica.

It runs `rsync` to mirror the `/p4/1/checkpoints` (assuming instance `1`) directory to the replica machine.

It then uses the latest checkpoint in that directory to update the local `offline_db` directory for the replica.

This ensures that the replica can be quickly and easily reseeded if required without having to first copy checkpoints locally (which can take hours over slow WAN links).

.Usage

/p4/common/bin/sync_replica.sh <instance>
/p4/common/bin/sync_replica.sh 1

==== templates directory

This sub-directory of `/p4/common/bin` contains some files which can be used as templates
for new commands if you wish:

* template.pl - Perl
* template.py - Python
* template.py.cfg - config file for python
* template.sh - Bash

They are not intended to be run directly.

==== update_limits.py

The `/p4/common/bin/update_limits.py` script is a Python script which is intended to be called from a crontab entry one per hour. It must be wrapped with the `p4master_run` script.

It ensures that all current users are added to the `limits` group. This makes it easy for an administrator to configure global limits on values such as MaxScanRows, MaxSearchResults etc. This can reduce load on a heavily loaded instance.

For more information:

* https://community.perforce.com/s/article/2529[Maximizing Perforce Helix Core Performance]
* https://community.perforce.com/s/article/2521[Multiple MaxScanRows and similar values]

.Usage

/p4/common/bin/update_limits.py <instance>
/p4/common/bin/update_limits.py 1

[appendix]
== SDP Package Contents and Planning

The directory structure of the SDP is shown below in Figure 1 - SDP Package Directory Structure. This includes all SDP files, including documentation and sample scripts. A subset of these files are deployed to server machines during the installation process.

sdp
doc
Server (Core SDP Files)
Unix
setup (Unix-specific setup)
p4
common
bin (Backup scripts, etc)
triggers (Example triggers)
config
etc
cron.d
init.d
systemd
lib
test
setup (cross platform setup - typemap, configure, etc)
test (automated test scripts)

Figure 1 - SDP Package Directory Structure

=== Volume Layout and Server Planning

Figure 2: SDP Runtime Structure and Volume Layout, viewed from the top down, displays
a Perforce _application_ administrator's view of the system, which shows how to
navigate the directory structure to find databases, log files, and versioned files in
the depots. Viewed from the bottom up, it displays a Perforce _system_ administrator's
view, emphasizing the physical volume where Perforce data is stored.

==== Memory and CPU

Make sure the server has enough memory to cache the *db.rev* database file and to prevent the server from paging during user queries. Maximum performance is obtained if the server has enough memory to keep all of the database files in memory. While the p4d process itself is frugal with system resources such as RAM, it benefits from an excess of RAM due to modern operating systems using excess RAM as file I/O cache. This is to the great benefit of p4d, even though the p4d process itself may not be seen as consuming much RAM directly.

*Below are some approximate guidelines for* allocating memory.

* 1.5 kilobyte of RAM per file revision stored in the server.

* 32 MB of RAM per user.

INFO: When doing detailed history imports from legacy SCM systems into Perforce, there may be many revisions of files. You want to account for `(total files) x (average number of revisions per file)` rather than simply the total number of files.

Use the fastest processors available with the fastest available bus speed. Faster processors are typically more desirable than a greater number of cores and provide better performance since quick bursts of computational speed are more important to Perforce's performance than the number of processors. Have a minimum of two processors so that the offline checkpoint and back up processes do not interfere with your Perforce server. There are log analysis options to diagnose underperforming servers and improve things. Contact Perforce Support/Perforce Consulting for details.

==== Directory Structure Configuration Script for Linux/Unix

This script describes the steps performed by the mkdirs.sh script on Linux/Unix platforms. Please review this appendix carefully before running these steps manually. Assuming the three-volume configuration described in the Volume Layout and Hardware section are used, the following directories are created. The following examples are illustrated with "1" as the server instance number.

Next, `mkdirs.sh` creates the following symlinks in the `/hxdepots/p4/1` directory:

Then these symlinks are created in the /p4 directory:

Next, `mkdirs.sh` renames the Perforce binaries to include version and build number, and then creates appropriate symlinks.

==== P4D versions and links

The versioned binary links in `/p4/common/bin` are as below.

For the example of <instance> `1` we have:

ls -l /p4/1/bin
p4d_1 -> /p4/common/bin/p4d_1_bin

The structure is shown in this example, illustrating values for two instances, with instance #1 using p4d release 2018.1 and instance #2 using release 2018.2.

In /p4/1/bin:

p4_1 -> /p4/common/bin/p4_1_bin
p4d_1 -> /p4/common/bin/p4d_1_bin

In /p4/2/bin:

p4_2 -> /p4/common/bin/p4_2
p4d_2 -> /p4/common/bin/p4d_2

In `/p4/common/bin`:

p4_1_bin -> p4_2018.1_bin
p4_2018.1_bin -> p4_2018.1.685046
p4_2018.1.685046

p4_2_bin -> p4_2018.2_bin
p4_2018.2_bin -> p4_2018.2.700949
p4_2018.2.700949

p4d_1_bin -> p4d_2018.1_bin
p4d_2018.1_bin -> p4d_2018.1.685046
p4d_2018.1.685046

p4d_2_bin -> p4d_2018.2_bin
p4d_2018.2_bin -> p4d_2018.2.700949
p4d_2018.2.700949

The naming of the last comes from:

./p4d_2018.2.700949 -V

Rev. P4D/LINUX26X86_64/2018.2/700949 (2019/07/31).

So we see the build number `p4d_2018.2.700949` being included in the name of the p4d executable.

TIP: Although this link structure may appear quite complex, it is easy to understand, and it allows different instances on the same server host to be running with different patch levels, or indeed different releases. And you can upgrade those instances independently of each other which can be very useful.

==== Case Insensitive P4D on Unix

By default `p4d` is case sensitive on Unix for filenames and directory names etc.

It is possible and quite common to run your server in case insensitive mode. This is often done when Windows is the main operating system in use on the client host machines.

IMPORTANT: In "case insensitive" mode, that means that you should ALWAYS execute `p4d` with the flag `-C1` (or you risk possible table corruption in some circumstances).

The SDP achieves this by executing a simple Bash script:

#!/bin/bash
P4D=/p4/common/bin/p4d_${SDP_INSTANCE}_bin
# shellcheck disable=SC2016
exec $P4D -C1 "$@"

So the above will ensure that `/p4/common/bin/p4d_1_bin` (for instance `1`) is executed with the `-C1` flag.

As noted above, for case sensitive servers, `p4d_1` is normally just a link:

/p4/1/bin/p4d_1 -> /p4/common/bin/p4d_1_bin

[appendix]
== The journalPrefix Standard

The Perforce Helix configurable https://www.perforce.com/manuals/cmdref/Content/CmdRef/configurables.configurables.html#journalPrefix[`journalPrefix`] determines where the active journal is rotated to when it becomes a numbered journal file during the journal rotation process. It also defines where checkpoints are created.

In the SDP structure, the `journalPrefix` is set so that numbered journals and checkpoints land on the `/hxdepots` volume. This volume contains critical digital assets that should be reliably backed up and should have sufficient storage for large digital assets such as checkpoints.

=== SDP Scripts that set `journalPrefix`

The SDP `configure_new_server.sh`, which applies SDP standards to fresh new `p4d` servers, sets the `journalPrefix` for the master server according to this standard.

The SDP `mkrep.sh` script, which creates new replicas, sets `journalPrefix for replicas according to this standard.

The SDP `mkdirs.sh` script, which initializes the SDP structure, creates a directory structure for checkpoints based on the journalPrefix.

=== First Form of `journalPrefix` Value

The first form of the `journalPrefix` value applies to the master server's metadata set. This value is of this form, where `N` is replaced with the SDP instance name:

/p4/N/checkpoints/p4_N

If the SDP instance name is the default `1`, then files with a `p4_1` prefix would be stored in the `/p4/1/checkpoints` directory on the filesystem. Journal files in that directory would have names like `p4_1.320.jnl` and checkpoints would have names like `p4_1.320.ckp.gz`.

This `journalPrefix` value and the corresponding `/p4/1/checkpoints` directory should be used for the master server. It should also be used for any replica that is a valid failover target for the master server. This includes all _completely unfiltered_ replicas of the master, such as `standby` and `forwarding-standby` replicas with a `P4TARGET` value referencing the master server.

NOTE: A `standby` replica, also referred to as a `journalcopy` replica due to the underlying replication mechanisms, cannot be filtered. Standby replicas are commonly deployed for High Availability (HA) and Disaster Recovery (DR) purposes.

==== Detail on "Completely Unfiltered"

A "completely unfiltered" replica is one in which:

* None of the `*DataFilter` fields in the replica's server spec are used
* The `p4 pull` command configured to pull metadata from the the replica's `P4TARGET` server, as defined in the replica's `startup._N_` configurable, does not use filtering options such as `-T`.
* The replica is not an Edge server (i.e. one with a `Services` value in the server spec of `edge-server`.) Edge servers are filtered by their vary nature, as they exclude various database tables from being replicated.
* The replica's seed checkpoint was created without the `-P _ServerID_` flag to `p4d`. The `-P` flag is used when creating seed checkpoints for filtered replicas and edge servers.
* The replicas `P4TARGET` server references something other than the master server, such as an edge server.

=== Second Form of `journalPrefix` Value

A second form of the `journalPrefix` is used when the replica is filtered, including edge servers. The second form of the `journalPrefix` value incorporates a shortened form of the _ServerID_ to indicate that the data set is specific to that _ServerID_. Because the metadata differs from the master, checkpoints for edge servers and filtered replicas are stored in a different directory, and use a prefix that identifies them as separate and divergent from the master's data set. This second form allows checkpoints from multiple edge servers or filtered replicas to be stored on an shared (e.g. NFS-mounted) `/hxdepots` volume.

The second form of journalPrefix is also used if the `/hxdepots` volume, on which checkpoints are stored, is shared (as indicated when the replicas `lbr.replication` value is set to a value of `shared`).

NOTE: Filtered replicas are a strict subset of the master server's metadata. Edge servers filter some database tables from the master, but also have their own independent metadata (mainly workspace metadata) that varies from the master server and is potentially larger than the master's data set for some tables.

The "shortened form" of the _ServerID_ removes the `p4d_` prefix (per <<_server_spec_naming_standard>>). So, for example an edge server with a _ServerID_` of `p4d_edge_uk` would use just the `edge_uk` portion of the _ServerID_ in the `journalPrefix`, which would look like:

/p4/N/checkpoints.edge_uk/p4_N.edge_uk

If the SDP instance name is the default `1`, then files with a `p4_1.edge_uk` prefix would be stored in the `/p4/1/checkpoints.edge_uk` directory on the filesystem. Journal files in that directory would have names like `p4_1.edge_uk.320.jnl` and checkpoints would have names like `p4_1.edge_uk.320.ckp.gz`.

=== Scripts for Maintaining the `offline_db`

The following SDP scripts help maintain the `offline_db`:

* `daily_checkpoint.sh`: The `daily_checkpoint.sh` is used on the master server. When run on the master server, this script rotates the active journal to a numbered journal file, and then maintains the master's `offline_db` using the numbered journal file immediately after it is rotated.

The `daily_checkpoint.sh` is also used on edge servers and filtered replicas. When run on edge servers and filtered replicas, this script maintains the replica's `offline_db` in a manner similar to the master, except that the journal rotation is skipped (as that can be done only on the master).

* `sync_replica.sh`: The SDP `sync_replica.sh` script is intended to be deployed on unfiltered replicas of the master. It maintains the `offline_db` by copying (via rsync) the checkpoints from the master, and then replays those checkpoints to the local `offline_db`. This keeps the `offline_db` of the replica current, which is good to have should the replica ever need to take over for the master.

INFO: For HA/DR and any purpose where replicas are not filtered, replicas of type `standby` and `forwarding-standby` should displace replicas of type `replica` and `forwarding-replica`.

=== SDP Structure and `journalPrefix`

On every server machine with the SDP structure where a `p4d` service runs (excluding broker-only and proxy-only hosts), a structure like the following should exist for each instance:

* A `/hxdepots/p4/N/checkpoints` directory
* In `/p4/N`, and symlink `checkpoints` that links to `/hxdepots/p4/N/checkpoints`, such that it can be referred to as `/p4/N/checkpoints`.

In addition, edge servers and filtered replicas will also have a structure like the following for each instance that runs an edge server or filtered replica:

* A `/hxdepots/p4/N/checkpoints.ShortServerID` directory
* In `/p4/N`, and symlink `checkpoints.ShortServerID` that links to `/hxdepots/p4/N/checkpoints.ShortServerID`, such that it can be referred to as `/p4/N/checkpoints.ShortServerID`.

The SDP `mkdirs.sh` script, which sets up the initial SDP structure, initializes this structure on initial install.

=== Replicas of Edge Servers

As edge servers have unique data, they are commonly deployed with their own `standby` replica with a `P4TARGET` value referencing a given edge server rather than the master. This enables faster recovery option for the edge server.

As a special case, a `standby` replica of an edge server should have the same `journalPrefix` value as the edge server it targets. Thus, the _ServerID_ baked into the journalPrefix of a replica of an edge is the ServerID of the target edge server, not the replica.

So for example, an edge server with a _ServerID_ of `p4d_edge_uk` has a `standby` replica with a _ServerID_ of `p4d_ha_edge_uk`. The journalPrefix of that edge should be the same as the edge server it targets, e.g.

/p4/1/checkpoints.edge_uk/p4_1.edge_uk

=== Goals of the `journalPrefix` Standard

Some design of goals this standard:

* Make it so the `/p4/N/checkpoints` folder is reserved to mean checkpoints created from the master server's full metadata set.
* Make the `/p4/N/checkpoints` folder be safe to rsync from the master to any machine in the topology (as may be needed in certain recovery situations for replicas and edge servers).
* Make it so the SDP `/hxdepots` volume can be NFS-mounted across multiple SDP machines safely, such that two or more edge servers (or filtered replicas) could share versioned files, while writing to separate checkpoints directories on a per-ServerID basis.
* Support all replication uses cases, including support for 'Workspace Servers', a name referring to a set of edge servers deployed in in the same location, typically sharing `/hxdepots` via NFS. Use of Workspace Servers can be used to scale Helix Core horizontally for massive user bases (typically several thousand users).

[appendix]
== Server Spec Naming Standard

Perforce Helix server specs identify various Helix servers in a topology. Servers can be p4d servers (master, replicas, edges), p4broker, p4p, etc. This standard defines the standard for the server spec names.

=== General Form

The general form of a server spec name is:

```
<HelixServerTag>_<ReplicaTypeTag>[<N>]_<SiteTag>

```

==== Helix Server Tags

The HelixServerTag_ is one of:

* `p4d`: for a Helix Core server (including all https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/deployment-architecture.html[distributed architecture] usages such as master/replica/edge).
* `p4broker`: A https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.broker.html[Helix Broker]
* `p4p`: A https://www.perforce.com/perforce/doc.current/manuals/p4sag/Content/P4SAG/chapter.proxy.html[Helix Proxy]
* `gconn`: Helix4Git (H4G) Connector
* `swarm`: Helix Swarm

As a special case, the _HelixServerTag_ is omitted for the ServerID of the master server spec.

==== Replica Type Tags

The _ReplicaType_ is one of:

* `master.<instance>`: The single master-commit server for a given SDP instance. SDP instance names are included in the ServerID for the master, as they intended to be unique within an enterprise. They must be unique to enable certain cross-instance sharing workflows, e.g. using remote depots and Helix native DVCS features.
* `ha`: High Availability. This indicates a replica that was specifically intended for HA purposes and for use with the `p4 failover` command. It further implies the following:
- The Services field value is `standby`.
- The `rpl.journalcopy.location=1` configurable is set, optimized for SDP deployment.
- The replica is not filtered in any way: No usage of the `-T` flag to `p4 pull` in the replicas startup._N_ configurables, and no usage of `*DataFilter` fields in the server spec.
- Versioned files are replicated (with an `lbr.replication` value of `readonly`).
- An HA replica is assumed to be geographically near its P4TARGET server, which can be a master server or an edge server.
- It may or may not use the `mandatory` option in the server spec. The `ha` tag does not indicate whether the `mandatory` option is used (as this is more transient thing not suitable for baking into a server spec naming standard).
* `ham`: A `ham` replica is the same as an `ha` replica except it does not replicate versioned files. Thus is a _metadata-only_ replica that shares versioned files with its P4TARGET server (master or edge) with an `lbr.replication` value of `shared`.
* `fr`: Forwarding Replica (unfiltered) that replicates versioned files.
* `frm`: Forwarding replica (unfiltered) that shares versioned files with its target server rather than replicating them.
* `fs`: Forwarding Standby (unfiltered) that replicates versioned files. This is the same as an `ha` server, except that it is not necessarily expected to be physically near its P4TARGET server. This could be suited for Disaster Recovery (DR) purposes.
* `fsm`: Forwarding standby (unfiltered) that shares versioned files with its target server rather than replicating them. This is the same as a `ham`, except that it is not necessarily expected to be physically near its P4TARGET server.
* `ffr`: Filtered Forwarding Replica. This replica uses some of filtering, such as usage of `*DataFilter` fields of the server spec or `-T` flag to `p4 pull` in the replicas `startup.<N>` configurables. Filtered replicas are not viable failover targets, as the filtered data would be lost.
* `ro` - Read Only replica (unfiltered), replicating versioned files).
* `rom` - Read Only metadata-only replica (unfiltered, sharing versioned files).
* `edge` - Edge servers. (As edge servers are filtered by their nature, they are not valid failover targets).

===== Replication Notes

If a replica does not need to be filtered, we recommend using `journalcopy` replication, i.e. using a replica with a `Services:` field value of `standby` or `forwarding-standby`. Only use non-journalcopy replication when using filtered replicas (and edge servers where there is no choice).

Some general tips:

* The `ha`, `ham` replicas are preferred for High Availability (HA) usage.
* The `fs` and `ro` replicas are preferred for Disaster Recovery (DR) usage.
* Since DR implies the replica is far from its master, replication of archives (rather than sharing e.g. via NFS) may not be practical, and so `rom` replicas don't have common use cases.
* The `fr` type replica is obsolete, and should be replaced with `fs` (using `journalcopy` replication).

==== Site Tags

A `<SiteTag>` looks something like these samples:

syd: Sydney, Australia
bos: Boston, MA, USA
blr: Bangalore, India

Note that in the SDP, Site Tags are defined in the file `/p4/common/config/SiteTags.cfg`. S sample file is:

.Example/Format
----
include::../Server/Unix/p4/common/config/SiteTags.cfg[]
----

The site tag needs to distinguish the data centers used by a single enterprise, and so generally short tag names are appropriate.

Each site tag may be understood to be a true data center (Tier 1, Tier 2, etc.), a computer room, computer closet, or reserved space under a developer's desk. In some cases organizations will already have their own familiar site tags to refer to different sites or data centers; these can be used.

In public cloud deployments, the public cloud provider's region names can be used (e.g. `us-east-1`), or an internal short form (e.g. `awsnva1` for the AWS us-east-1 data center in Northern Virginia, USA.

As a special case, the `<SiteTag>` is omitted for the master server spec.

=== Example Server Specs

Here are some sample server spec names based on this convention:

* `master.1`: A master server for SDP instance 1.
* `p4d_ha_chi`: A High Availability (HA) server, suitable for use with `p4 failover`, located in Chicago, IL.
* `p4d_ha2_chi`: A second High Availability server, suitable for use with `p4 failover`, located in Chicago, IL.
* `p4d_ffr_pune`: A filtered forwarding replica in Pune, India.
* `p4d_edge_blr`: An edge server located in Bangalore, India.
* `p4d_ha_edge_blr`: An HA server with P4TARGET pointing to the edge server in Bangalore, India.
* `p4d_edge3_awsnva`: A 3rd edge server in AWS data center in the us-east-1 (Northern Virginia) region.

=== Implications of Replication Filtering

Replicas that are filtered in any way are not viable candidate servers to failover to, because any filtered data would be lost.

=== Other Replica Types

The naming convention intentionally does not account for all possible server specs available with p4d. The standard accounts only for the distilled list of server spec types supported by the SDP `mkrep.sh` script, which are the most useful and commonly used ones.

=== The SDP `mkrep.sh` script

The SDP script `mkrep.sh` adheres to this standard. For more information on creating replicas with this script. See: <<_using_mkrep_sh>>.

[appendix]
== Frequently Asked Questions/Troubleshooting

This appendix lists common questions and problems encountered by SDP users. Do not hesitate to contact consulting@perforce.com if additional assistance is required.

=== Journal out of sequence

This error is encountered when the offline and live databases are no longer in sync, and will cause the offline checkpoint process to fail. Because the scripts will replay all outstanding journals, this error is much less likely to occur. This error can be fixed by:

* recreating the offline_db: <<_recreate_offline_db_sh>>
* alternatively if that doesn't work - run the <<_live_checkpoint_sh>> script (note the warnings about locking live database)

=== Unexpected end of file in replica daily sync

Check the start time and duration of the <<_daily_checkpoint_sh>> cron job on the master. If this overlaps with the start time of the <<_sync_replica_sh>> cron job on a replica, a truncated checkpoint may be rsync'd to the replica and replaying this will result in an error.

Adjust the replica's cronjob to start later to resolve this.

Default cron job times, as installed by the SDP are initial estimates, and should be adjusted to suit your production environment.

[appendix]
== Starting and Stopping Services

There are a variety of _init mechanisms_ on various Linux flavors. The following describes how to start and stop services using different init mechanisms.

=== SDP Service Management with the systemd init mechanism

On modern OS's, like RHEL/CentOS 7/& 8, and Ubuntu 18.04 and 20.04, and SuSE 12 and 15, the `systemd` init mechanism is used. The underlying SDP init scripts are used, but they are wrapped with "unit" files in `/etc/systemd/system` directory, and called using the `systemctl` interface as `root` (typically using `sudo` while running as the `perforce` user).

On systems where systemd is used, *the service can only be started using the `sudo systemctl` command*, as in this example:

sudo systemctl status p4d_N
sudo systemctl start p4d_N
sudo systemctl status p4d_N

Note that there is no immediate indication from running the start command that it was actually successful, hence the status command is run after. For best results, wait a few seconds after running the start command before running the status command. (If the start was unsuccessful, a good start to diagnostics would include running `tail /p4/N/logs/log` and `cat /p4/N/logs/p4d_init.log`).

The service should also be stopped in the same manner:

sudo systemctl stop p4d_N

Checking for status can be done using both the `systemctl` command, or calling the underlying SDP init script directly. However, there are cases where the status indication may be different. Calling the underlying SDP init script for status will always report status accurately, as in this example:

/p4/N/bin/p4d_N_init status

That works reliably even if the service was started with `systemctl start p4d_N`.

Checking status using the systemctl mechanism is done like so:

sudo systemctl start p4d_N

If this reports that the service is *`active (running)`*, such indication is reliable. However, the status indication may falsely indicate that the service is down when it is actually running. This could occur with older init scripts if the underlying init script was used to start the server rather than using `sudo systemctl start p4d_N` as prescribed. The status indication would only indicate that the service is running if it was started using the systemctl mechanism. As of SDP 2020.1, a safety feature now assures that system is always used if configured.

==== Brokers and Proxies

In the above examples for starting, stopping, and status-checking of services using either the SysV or `systemd` init mechanisms, `p4d` is the sample service managed. This can be replaced with `p4p` or `p4broker` to manage proxy and broker services, respectively. For example, on a `systemd` system, the broker service, if configured, can be started like so:

sudo systemctl status p4broker_1
sudo systemctl start p4broker_1
sudo systemctl status p4broker_1

==== Root or sudo required with systemd

For SysV, having sudo is optional, as the underlying SDP init scripts can be called safely as `root` or `perforce`; the service runs as `perforce`.

If `systemd` is used, by default `root` access (often granted via `sudo`) is needed to start and stop the p4d service, effectively making sudo access required for the `perforce` user. The systemd "unit" files provided with the SDP handle making sure the underlying SDP init scripts start running under the correct operating system account user (typically `perforce`).

=== SDP Service Management with SysV init mechanism

On older OS's, like RHEL/CentOS 6, the SysV init mechanism is used. For those, you can the following example commands, replacing _N_ with the actual SDP instance name

sudo service p4d_N_init status

The service can be checked for status, started and stopped by calling the underlying SDP init scripts as either `root` or `perforce` directly:

/p4/N/bin/p4d_N_init status

Replace `status` with `start` or `stop` as needed. It is common to do a `status` check immediately before and after a `start` or `stop`.

During installation, a symlink is setup such that `/etc/init.d/p4d_N_init` is a symlink to `/p4/N/bin/p4_N_init`, and the proper `chkconfig` commands are run to register the application as a service that will be started on boot and gracefully shutdown on reboot.

On systems using SysV, calling the underlying SDP init scripts is safe and completely interchangeable with using the `service` command being run as `root`. That is, you can start a service with the underlying SDP init script, and the SysV init mechanism will still safely detect whether the service is running during a system shutdown, and thus will perform a graceful stop if p4d is up and running when you go to reboot. The status indication of the underlying SDP init script is absolutely 100% reliable, regardless of how the service was started (i.e. calling the init script directly as `root` or `perforce`, or using the `service` call as `root`.

#	Change	User	Description
#95	29608	tom_tyler	Doc updates as part of release cycle.
#94	29567	andy_boutte	Adding option to delivery log and alerts via PagerDuty
#93	29563	andy_boutte	Adding optional local config directories for both instance and SDP wide configuration.
#92	29483	robert_cowham	Clarify case-insensitive servers
#91	29475	robert_cowham	For SELinux note the yum package to install for basics
#90	29370	tom_tyler	Fixed a single typo.
#89	29311	tom_tyler	Per Thomas Albert, adjusted title on doc page: From: Perforce Helix Server Deployment Package (for UNIX/Linux) To: Perforce Helix Core Server Deployment Package (for UNIX/Linux) #review-29312 @thomas_albert
#88	29239	tom_tyler	Updated 'sudoers' documentation.
#87	29238	tom_tyler	Fixing two harmless typos.
#86	29236	tom_tyler	Updated all doc rev numbers for supported and unsupported docs to 2022.2 as prep for SDP 2022.2 release.
#85	29137	tom_tyler	Added docs for proxy_rotate.sh, and updated docs for broker_rotate.sh.
#84	29096	robert_cowham	Add a section on installing Swarm triggers
#83	29055	robert_cowham	Update troubleshooting to check ckp_running.txt semaphore
#82	29044	robert_cowham	Update to include troubleshooting 'p4 pull -ls' errors
#81	29019	tom_tyler	Clarified to indicate RHEL 8 is fine; only CentOS 8 is discouraged. When changes were made to indicate CentOS 8 was discouraged (due to being made upstream of RHEL, and thus a dev/test sandbox for RHEL (like Fedora) rather than a solid downstream distro suitable for production, use, the text inadvertaintly gavem the impression that RHEL 8 was not supported.
#80	29002	tom_tyler	Doc correction; tip refers to 'wget' in a sample command that uses curl instead.
#79	28986	tom_tyler	Clarified text related to mandatory vs. nomandatory standby replicas.
#78	28980	robert_cowham	Note how to configure Swarm to use postfix
#77	28926	robert_cowham	Added check for Swarm JIRA project access.
#76	28837	tom_tyler	Updated docs for r22.1 release.
#75	28771	tom_tyler	Changed email address for Perforce Support. #review-28772 @amo @robert_cowham
#74	28767	tom_tyler	SDP Guide Doc Updates: * Fixed typos. * Enhanced mandatory/nomandatory description. * Added detail to instructions on using the `perforce-p4python` packcage, and change reference from Swarm docs to the more general Perforce Packages page. * Refactored FAQ, Troubleshooting Guide, and Sample Procedures appendices for greater clarity. * Added Appendix on Brokers in Stack Topology #review-28768
#73	28716	andy_boutte	Correcting path to p4d_<instance>
#72	28686	robert_cowham	Clarify FAQ for replication errors
#71	28667	robert_cowham	Add a note re monitoring. Add some FAQ appendix questions.
#70	28649	andy_boutte	Documenting alert notifications via AWS SNS #review https://jira.perforce.com:8443/browse/CLD-14
#69	28618	tom_tyler	Fixed missing command re: .ssh directory generation.
#68	28606	tom_tyler	Added SDP Health Checks appendix to UNIX/Linux SDP Guide. Also removed some references to '-k' (insecure) in curl statements. #review-28607 @d_benedict
#67	28605	tom_tyler	Fixed cosmetic/rendering issue; added a blank line in *.adoc so a bulleted list displays correctly.
#66	28604	robert_cowham	Added notes for Python/P4Python and CheckCaseTrigger installation
#65	28534	lbarbier	Enhancements to SDP Guide/Unix for adoc version following job 736.
#64	28503	robert_cowham	Add SELinux tip
#63	28496	robert_cowham	Fix typo in journalctl
#62	28493	robert_cowham	Added notes to get systemd SDP scripts working under SELinux Thanks to Rich Alloway!
#61	28487	robert_cowham	Document Swarm/JIRA cloud link process. Also Postfix clarification.
#60	28374	tom_tyler	Updated :revnumber: and :revdate: fields for *.adoc files for release.
#59	28351	robert_cowham	Tweaked sdp upgrades docs.
#58	28261	tom_tyler	Fixed on-character doc typo (curk -> curl).
#57	28246	tom_tyler	Enahnced the 'Upgrading the SDP' section of the SDP Guide: * Added sample command to deal with possibly existing tarball. * Added tips to enable less technical users to get past basic snags. * Added detail on how to find your /hxdepots directory if not default.
#56	28230	tom_tyler	Minor doc corrections.
#55	28225	tom_tyler	Enhanced info on upgrading the SDP.
#54	28222	tom_tyler	Fixed broken link/ref.
#53	28197	tom_tyler	Partially functional version of sdp_upgrade.sh, with doc updates.
#52	28195	tom_tyler	Refined location of SiteTags.cfg.sample file.
#51	28193	tom_tyler	Renamed sample files (e.g. SiteTags.cfg) in SDP tarball tree, appending a .sample tag, to make rsync overlay of /p4/common/config safe. Updated related docs in mkrep.sh referring to the sample file, to improve an error message to guide the user to find the sample file. #review-28194
#50	28180	tom_tyler	Fixed oversight in documentation, describing how to check the SDP Version file.
#49	28162	tom_tyler	Typo/line add.
#48	28158	tom_tyler	Made former '-n' preview mode the default behavior. Added new '-y' flag to execute a real upgrade. Added a message in preview mode to clarify that no actual upgrade is performed. Removed the '-n' preview option, as preview mode is now the default behavior. #review-28159
#47	28154	tom_tyler	Added new Sample Procedures section. Added Sample Procedure: Reseeding an Edge Server Corrected teriminology re: 'instance' and 'process' and 'server' to be inline with other documentation and common usage. Other minor fixes. #review-28155
#46	28104	tom_tyler	Fixed typo.
#45	28102	tom_tyler	Clarified "breathing" comment (as in "breathing room") with more clear and more translatable language. #review-28103 @thomas_albert
#44	28100	tom_tyler	Updated SDP Guide for UNIX/Linux: * Filled in missing information re: new upgrades. * Expanded on definition of vague "Exceptionally large" term. Generating HTML for easy review; holding off on PDF as it will be generated during the release. #review-28101 @roadkills_r_us
#43	28071	robert_cowham	Clarify some notes re setting up Gmail
#42	27978	robert_cowham	Clarifications and warnings around load_checkpoint.sh Mention recreate_offline_db.sh a little more prominently Recommend installing postfix for mail.
#41	27890	tom_tyler	Updated Release Notes and SDP Guide to clarify SDP r20.1 supports Helix Core binaries up to r21.1, in advance of the coming SDP r21.1 release that will make it more obvious. In get_helix_binaries.sh: * Changed default Helix Core binary version to r21.1. * Changed examples of getting a different version to reference r20.2. #review-27891 @amo
#40	27875	tom_tyler	Changes to SDP Guide: * Changed location of home dir for `perforce` OSUSER for manual installations to be the same as it is for Helix Installer installations, changing from '/p4' to '/home/perforce'. The /home/perforce is preferred for several reasons: - To work with common SSHD configs that require home directories to be under /home. - To keep /p4 clean, used only for SDP things, and not have user files like ~/.vimrc, ~/.Xauthority, Desktop, ~/.ssh, ~/.bashrc, ~/.p4enviro, ~/.p4tickets, ~/.p4config, etc. (The original decision to use '/p4' was made in 2007, long before any ~/.p4* files existed). - To have a separate home directory, which has many benefits including simplifying operational procedures that rely on having a separate home directory available. - That said, having the home directory in /p4 was the standard for a long while, and isn't really broken despite no longer being preferred. * Replaced high-byte quotes with low-byte quotes in several places. * Corrected case of Max* settings (e.g. maxresults -> MaxResults) to match how they appear in the group spec. * Fixed a few typos (one in doc, one in a suggested crontab).
#39	27779	tom_tyler	Fixed typo found by a customer. Thanks!
#38	27764	tom_tyler	Updated Version to release SDP 2020.1.27763. Re-generated docs.
#37	27722	tom_tyler	Refinements to @27712: * Resolved one out-of-date file (verify_sdp.sh). * Added missing adoc file for which HTML file had a change (WorkflowEnforcementTriggers.adoc). * Updated revdate/revnumber in .adoc files. Additional content updates in Server/Unix/p4/common/etc/cron.d/ReadMe.md. * Bumped version numbers on scripts with Version= def'n. * Generated HTML, PDF, and doc/gen files: - Most HTML and all PDF are generated using Makefiles that call an AsciiDoc utility. - HTML for Perl scripts is generated with pod2html. - doc/gen/*.man.txt files are generated with .../tools/gen_script_man_pages.sh. #review-27712
#36	27710	robert_cowham	Another tweak to tmpfs settings
#35	27709	robert_cowham	Note check for serverlocks. Fix typo in path in failover.
#34	27643	7ecapilot	Doc errors and corrections
#33	27536	tom_tyler	Legacy Upgrade Guide doc updates: * Added 'Put New SDP in Place' section. * Added 'Set SDP Counters' section to set SDP_VERSION and SDP_DATE counters. * Covered updating depot spec Map fields. * Covered adding server.id files. * Added missing content on putting new SDP directory in place. SDP_Guide.Unix doc updates: * Added Legacy Upgrade Scripts section w/clear_depot_Map_fields.sh. Updated Makefile with new doc build dependencies. Regenerated docs.
#32	27518	tom_tyler	Merged Robert's SDP Guide changes in review 27490 with my latest edits.
#31	27505	tom_tyler	Enhanced doc for Systemd/SysV services management and configuration docs, separating basic configuration for start/stop/status from enabling for start on boot (with Systemd/SysV variations for each). Added doc coverage for using systemd to enable multiple broker configs. Added doc coverage for applying limited sudo. Spell check.
#30	27321	tom_tyler	General reivew completed. Removed links that downloaded scripts than referenced doc content in HTML form. A future SDP release may change restore links of a different kind.
#29	27250	tom_tyler	Adjusted JournalPrefix standard to account for shared /hxdepots. The JournalPrefix standard now allows for unfiltered replicas (such as HA/DR replicas) to use same journalPrefix value as filtered replicas and edge servers, using per-ServerID checkpoints folder, if they share the same /hxdepots (e.g. NFS-mounted) with the master (e.g. when lbr.replication=shared). Related code change made to mkdirs.sh and mkrep.sh to support the tweaks to the standard. #review-27251
#28	27156	tom_tyler	Consolidated SDP Standards into the SDP Guide for UNIX/Linux. Added references to those sections in the Windows SDP Guide. Normalized doc titles. Various other doc update.
#27	27096	tom_tyler	Refactored SDP Legacy Upgrade content into a separate doc. The SDP Guide will be remain comprehensive and cover how to upgrade the SDP itself forwardm from the current version (2020.1) using the new, p4d-like incremental upgrade mechanism. The content for manual upgrade procedures needed to get older SDP installations to 2020.1 is only useful until sites are on 2020.1. This content is extensive, narrowly focused, and of value only once per installation, and thus the legacy upgrade content is separated into its own document. Regenerated work-in-progress HTML files for easier review.
#26	27059	robert_cowham	Update section link to mention Section 8
#25	27058	robert_cowham	Added direct links to the various scripts where they are explained. Tweak some wording in SDP upgrade section
#24	27055	tom_tyler	Pulled the SDP Upgrade Guide for Linux into the main SDP Guide, and deleted the separate upgrade doc. Also other minor refinements. Pulled in updated mkrep.sh v2.5.0 docs. This version is still in progress. Search for EDITME to find areas requiring addtional content.
#23	27041	robert_cowham	Windows Guide directly includes chunks of the Unix guide for replication etc, with a little ifdef to avoid Unix only comments. Fix Makefile and add missing generated man page.
#22	27039	robert_cowham	Minor tweaks for ease of use - docs not generated.
#21	27033	tom_tyler	Work in progress updates to SDP_Guilde.Unix.
#20	27021	tom_tyler	Re-ordered so `systemd` info comes first (as it is more likely to be relevant), and older SysV docs deferred. Various other tweaks.
#19	27013	tom_tyler	Updated adoc includes to reference generated manual pages in 'gen'. The 'gen' subdirectory contains man pages generated from scripts gen_script_man_pages.sh. Made various other minor doc tweaks.
#18	26992	robert_cowham	Document SiteTags.cfg file
#17	26981	tom_tyler	Added Appendix on starting and stopping the server. #review @d_benedict
#16	26851	robert_cowham	Fix typo in tmpfs /etc/fstab entry which stopped it working in the doc. Mention in pre-requisites for failover and failover guide the need to review OS Config for your failover server. Document Ubuntu 2020.04 LTS and CentOS/RHEL 8 support. Note performance has been observed to be better with CentOS. Document pull.sh and submit.sh in main SDP guide (remove from Unsupported doc). Update comments in triggers to reflect that they are reference implementations, not just examples. No code change.
#15	26780	robert_cowham	Complete rename of P4DNSNAME -> P4MASTERHOST
#14	26755	robert_cowham	Include p4verify.sh man page in SDP Guide automatically for usage section.
#13	26748	robert_cowham	Add recommended performance tweaks: - THP off - server.locks directory into RAM
#12	26747	robert_cowham	Update with some checklists for failover to ensure valid. Update to v2020.1 Add Usage sections where missing to Unix guide Refactor the content in Unix guide to avoid repetition and make things read more sensibly.
#11	26727	robert_cowham	Add section on server host naming conventions Clarify HA and DR, and update links across docs Fix doc structure for Appendix numbering
#10	26674	tom_tyler	Removed reference to deleted file.
#9	26661	robert_cowham	Tidying up cross references. Added missing sync_replica.sh docs.
#8	26656	robert_cowham	Fix typo
#7	26654	robert_cowham	First draft of new Failover Guide using "p4 failover" Linked from SDP Unix Guide
#6	26649	robert_cowham	More SDP Doc tidy up. Removed some command summary files.
#5	26644	robert_cowham	SDP Doc Update to address jobs. Mainly documents scripts which lacked any mention.
#4	26637	robert_cowham	Include script help within doc Requires a couple of tags in the scripts themselves.
#3	26631	robert_cowham	New AsciiDoc version of Windows SDP guide
#2	26628	robert_cowham	Basically have things working for AsciiDoc
#1	26627	robert_cowham	First version of AsciiDoc with associated PDF

SDP_Guide.Unix.adoc #45